| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix NULL pointer dereference in amdgpu_gmc_filter_faults_remove
On APUs such as Raven and Renoir (GC 9.1.0, 9.2.2, 9.3.0), the ih1 and
ih2 interrupt ring buffers are not initialized. This is by design, as
these secondary IH rings are only available on discrete GPUs. See
vega10_ih_sw_init() which explicitly skips ih1/ih2 initialization when
AMD_IS_APU is set.
However, amdgpu_gmc_filter_faults_remove() unconditionally uses ih1 to
get the timestamp of the last interrupt entry. When retry faults are
enabled on APUs (noretry=0), this function is called from the SVM page
fault recovery path, resulting in a NULL pointer dereference when
amdgpu_ih_decode_iv_ts_helper() attempts to access ih->ring[].
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0000000000000004
RIP: 0010:amdgpu_ih_decode_iv_ts_helper+0x22/0x40 [amdgpu]
Call Trace:
amdgpu_gmc_filter_faults_remove+0x60/0x130 [amdgpu]
svm_range_restore_pages+0xae5/0x11c0 [amdgpu]
amdgpu_vm_handle_fault+0xc8/0x340 [amdgpu]
gmc_v9_0_process_interrupt+0x191/0x220 [amdgpu]
amdgpu_irq_dispatch+0xed/0x2c0 [amdgpu]
amdgpu_ih_process+0x84/0x100 [amdgpu]
This issue was exposed by commit 1446226d32a4 ("drm/amdgpu: Remove GC HW
IP 9.3.0 from noretry=1") which changed the default for Renoir APU from
noretry=1 to noretry=0, enabling retry fault handling and thus
exercising the buggy code path.
Fix this by adding a check for ih1.ring_size before attempting to use
it. Also restore the soft_ih support from commit dd299441654f ("drm/amdgpu:
Rework retry fault removal"). This is needed if the hardware doesn't
support secondary HW IH rings.
v2: additional updates (Alex)
(cherry picked from commit 6ce8d536c80aa1f059e82184f0d1994436b1d526) |
| In the Linux kernel, the following vulnerability has been resolved:
rocker: fix memory leak in rocker_world_port_post_fini()
In rocker_world_port_pre_init(), rocker_port->wpriv is allocated with
kzalloc(wops->port_priv_size, GFP_KERNEL). However, in
rocker_world_port_post_fini(), the memory is only freed when
wops->port_post_fini callback is set:
if (!wops->port_post_fini)
return;
wops->port_post_fini(rocker_port);
kfree(rocker_port->wpriv);
Since rocker_ofdpa_ops does not implement port_post_fini callback
(it is NULL), the wpriv memory allocated for each port is never freed
when ports are removed. This leads to a memory leak of
sizeof(struct ofdpa_port) bytes per port on every device removal.
Fix this by always calling kfree(rocker_port->wpriv) regardless of
whether the port_post_fini callback exists. |
| A Null Pointer Dereference vulnerability exists in the TON Virtual Machine (TVM) within the TON Blockchain before v2025.06. The issue is located in the execution logic of the INMSGPARAM instruction, where the program fails to validate if a specific pointer is null before accessing it. By sending a malicious transaction or smart contract, an attacker can trigger this null pointer dereference, causing the validator node process to crash (segmentation fault). This results in a Denial of Service (DoS) affecting the availability of the entire blockchain network. |
| The PixelYourSite – Your smart PIXEL (TAG) & API Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'pysTrafficSource' parameter and the 'pys_landing_page' parameter in all versions up to, and including, 11.2.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The BFG Tools – Extension Zipper plugin for WordPress is vulnerable to Path Traversal in all versions up to, and including, 1.0.7. This is due to insufficient input validation on the user-supplied `first_file` parameter in the `zip()` function. This makes it possible for authenticated attackers, with Administrator-level access and above, to read the contents of arbitrary files and directories outside the intended `/wp-content/plugins/` directory, which can contain sensitive information such as wp-config.php. |
| The StickEasy Protected Contact Form plugin for WordPress is vulnerable to Sensitive Information Disclosure in all versions up to, and including, 1.0.2. The plugin stores spam detection logs at a predictable publicly accessible location (wp-content/uploads/stickeasy-protected-contact-form/spcf-log.txt). This makes it possible for unauthenticated attackers to download the log file and access sensitive information including visitor IP addresses, email addresses, and comment snippets from contact form submissions that were flagged as spam. |
| The MDirector Newsletter plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 4.5.8. This is due to missing nonce verification on the mdirectorNewsletterSave function. This makes it possible for unauthenticated attackers to update the plugin's settings via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The Link Hopper plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘hop_name’ parameter in all versions up to, and including, 2.5 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/sva: invalidate stale IOTLB entries for kernel address space
Introduce a new IOMMU interface to flush IOTLB paging cache entries for
the CPU kernel address space. This interface is invoked from the x86
architecture code that manages combined user and kernel page tables,
specifically before any kernel page table page is freed and reused.
This addresses the main issue with vfree() which is a common occurrence
and can be triggered by unprivileged users. While this resolves the
primary problem, it doesn't address some extremely rare case related to
memory unplug of memory that was present as reserved memory at boot, which
cannot be triggered by unprivileged users. The discussion can be found at
the link below.
Enable SVA on x86 architecture since the IOMMU can now receive
notification to flush the paging cache before freeing the CPU kernel page
table pages. |
| The myCred plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'mycred_load_coupon' shortcode in all versions up to, and including, 2.9.7.3 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Allow HTML in Category Descriptions plugin for WordPress is vulnerable to Stored Cross-Site Scripting via category descriptions in all versions up to, and including, 1.2.4. This is due to the plugin unconditionally removing the `wp_kses_data` output filter for term_description, link_description, link_notes, and user_description fields without checking user capabilities. This makes it possible for authenticated attackers, with administrator-level access and above, to inject arbitrary web scripts in category descriptions that will execute whenever a user accesses a page where the category description is displayed. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| The User Language Switch plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'tab_color_picker_language_switch' parameter in all versions up to, and including, 1.6.10 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| The Best-wp-google-map plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'latitude' and 'longitudinal' parameters of the 'google_map_view' shortcode in all versions up to, and including, 2.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The MP3 Audio Player – Music Player, Podcast Player & Radio by Sonaar plugin for WordPress is vulnerable to Server-Side Request Forgery in versions 5.3 to 5.10 via the 'load_lyrics_ajax_callback' function. This makes it possible for authenticated attackers, with author level access and above, to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. |
| The Mail Mint plugin for WordPress is vulnerable to blind SQL Injection via the 'forms', 'automation', 'email/templates', and 'contacts/import/tutorlms/map' API endpoints in all versions up to, and including, 1.19.2 . This is due to insufficient escaping on the user supplied 'order-by', 'order-type', and 'selectedCourses' parameters and lack of sufficient preparation on the existing SQL queries. This makes it possible for authenticated attackers, with administrator level access and above, to append additional SQL queries into already existing queries. |
| The MailChimp Campaigns plugin for WordPress is vulnerable to Missing Authorization in all versions up to, and including, 3.2.4. This is due to missing capability checks on the `mailchimp_campaigns_manager_disconnect_app` function that is hooked to the AJAX action of the same name. This makes it possible for authenticated attackers, with Subscriber-level access and above, to disconnect the site from its MailChimp synchronization app, disrupting automated email campaigns and marketing integrations. |
| The personal-authors-category plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the URL path in all versions up to, and including, 0.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The QuestionPro Surveys plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'questionpro' shortcode in all versions up to, and including, 1.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Simple Wp colorfull Accordion plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'title' parameter in the 'accordion' shortcode in all versions up to, and including, 1.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Sphere Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'width' parameter in the 'show_sphere_image' shortcode in all versions up to, and including, 1.0.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
