| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
can: kvaser_pciefd: refine error prone echo_skb_max handling logic
echo_skb_max should define the supported upper limit of echo_skb[]
allocated inside the netdevice's priv. The corresponding size value
provided by this driver to alloc_candev() is KVASER_PCIEFD_CAN_TX_MAX_COUNT
which is 17.
But later echo_skb_max is rounded up to the nearest power of two (for the
max case, that would be 32) and the tx/ack indices calculated further
during tx/rx may exceed the upper array boundary. Kasan reported this for
the ack case inside kvaser_pciefd_handle_ack_packet(), though the xmit
function has actually caught the same thing earlier.
BUG: KASAN: slab-out-of-bounds in kvaser_pciefd_handle_ack_packet+0x2d7/0x92a drivers/net/can/kvaser_pciefd.c:1528
Read of size 8 at addr ffff888105e4f078 by task swapper/4/0
CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 6.15.0 #12 PREEMPT(voluntary)
Call Trace:
<IRQ>
dump_stack_lvl lib/dump_stack.c:122
print_report mm/kasan/report.c:521
kasan_report mm/kasan/report.c:634
kvaser_pciefd_handle_ack_packet drivers/net/can/kvaser_pciefd.c:1528
kvaser_pciefd_read_packet drivers/net/can/kvaser_pciefd.c:1605
kvaser_pciefd_read_buffer drivers/net/can/kvaser_pciefd.c:1656
kvaser_pciefd_receive_irq drivers/net/can/kvaser_pciefd.c:1684
kvaser_pciefd_irq_handler drivers/net/can/kvaser_pciefd.c:1733
__handle_irq_event_percpu kernel/irq/handle.c:158
handle_irq_event kernel/irq/handle.c:210
handle_edge_irq kernel/irq/chip.c:833
__common_interrupt arch/x86/kernel/irq.c:296
common_interrupt arch/x86/kernel/irq.c:286
</IRQ>
Tx max count definitely matters for kvaser_pciefd_tx_avail(), but for seq
numbers' generation that's not the case - we're free to calculate them as
would be more convenient, not taking tx max count into account. The only
downside is that the size of echo_skb[] should correspond to the max seq
number (not tx max count), so in some situations a bit more memory would
be consumed than could be.
Thus make the size of the underlying echo_skb[] sufficient for the rounded
max tx value.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
In order to make sure callers of vmbus_establish_gpadl() and
vmbus_teardown_gpadl() don't return decrypted/shared pages to
allocators, add a field in struct vmbus_gpadl to keep track of the
decryption status of the buffers. This will allow the callers to
know if they should free or leak the pages. |
| Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured.
The issue occurs in the following cases:
* Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n";
* Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n" |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix out of bounds punch offset
Punching a hole with a start offset that exceeds max_end is not
permitted and will result in a negative length in the
truncate_inode_partial_folio() function while truncating the page cache,
potentially leading to undesirable consequences.
A simple reproducer:
truncate -s 9895604649994 /mnt/foo
xfs_io -c "pwrite 8796093022208 4096" /mnt/foo
xfs_io -c "fpunch 8796093022213 25769803777" /mnt/foo
kernel BUG at include/linux/highmem.h:275!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 710 Comm: xfs_io Not tainted 6.15.0-rc3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:zero_user_segments.constprop.0+0xd7/0x110
RSP: 0018:ffffc90001cf3b38 EFLAGS: 00010287
RAX: 0000000000000005 RBX: ffffea0001485e40 RCX: 0000000000001000
RDX: 000000000040b000 RSI: 0000000000000005 RDI: 000000000040b000
RBP: 000000000040affb R08: ffff888000000000 R09: ffffea0000000000
R10: 0000000000000003 R11: 00000000fffc7fc5 R12: 0000000000000005
R13: 000000000040affb R14: ffffea0001485e40 R15: ffff888031cd3000
FS: 00007f4f63d0b780(0000) GS:ffff8880d337d000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000001ae0b038 CR3: 00000000536aa000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
truncate_inode_partial_folio+0x3dd/0x620
truncate_inode_pages_range+0x226/0x720
? bdev_getblk+0x52/0x3e0
? ext4_get_group_desc+0x78/0x150
? crc32c_arch+0xfd/0x180
? __ext4_get_inode_loc+0x18c/0x840
? ext4_inode_csum+0x117/0x160
? jbd2_journal_dirty_metadata+0x61/0x390
? __ext4_handle_dirty_metadata+0xa0/0x2b0
? kmem_cache_free+0x90/0x5a0
? jbd2_journal_stop+0x1d5/0x550
? __ext4_journal_stop+0x49/0x100
truncate_pagecache_range+0x50/0x80
ext4_truncate_page_cache_block_range+0x57/0x3a0
ext4_punch_hole+0x1fe/0x670
ext4_fallocate+0x792/0x17d0
? __count_memcg_events+0x175/0x2a0
vfs_fallocate+0x121/0x560
ksys_fallocate+0x51/0xc0
__x64_sys_fallocate+0x24/0x40
x64_sys_call+0x18d2/0x4170
do_syscall_64+0xa7/0x220
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by filtering out cases where the punching start offset exceeds
max_end. |
| Denver SHO-110 IP cameras expose a secondary HTTP service on TCP port 8001 that provides access to a '/snapshot' endpoint without authentication. While the primary web interface on port 80 enforces authentication, the backdoor service allows any remote attacker to retrieve image snapshots by directly requesting the 'snapshot' endpoint. An attacker can repeatedly collect snapshots and reconstruct the camera stream, compromising the confidentiality of the monitored environment. |
| A vulnerability has been identified in PS/IGES Parasolid Translator Component (All versions < V29.0.258). The affected applications contains an out of bounds read vulnerability while parsing specially crafted IGS files. This could allow an attacker to crash the application or execute code in the context of the current process. (ZDI-CAN-26755) |
| A vulnerability was found in WebKit. The flaw is triggered when processing maliciously crafted web content that may lead to arbitrary code execution. Improved memory handling addresses the multiple memory corruption issues. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: cs_dsp: Fix OOB memory read access in KUnit test (wmfw info)
KASAN reported out of bounds access - cs_dsp_mock_wmfw_add_info(),
because the source string length was rounded up to the allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: cs_dsp: Fix OOB memory read access in KUnit test (ctl cache)
KASAN reported out of bounds access - cs_dsp_ctl_cache_init_multiple_offsets().
The code uses mock_coeff_template.length_bytes (4 bytes) for register value
allocations. But later, this length is set to 8 bytes which causes
test code failures.
As fix, just remove the lenght override, keeping the original value 4
for all operations. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: cs_dsp: Fix OOB memory read access in KUnit test
KASAN reported out of bounds access - cs_dsp_mock_bin_add_name_or_info(),
because the source string length was rounded up to the allocation size. |
| A flaw was found in the soup_multipart_new_from_message() function of the libsoup HTTP library, which is commonly used by GNOME and other applications to handle web communications. The issue occurs when the library processes specially crafted multipart messages. Due to improper validation, an internal calculation can go wrong, leading to an integer underflow. This can cause the program to access invalid memory and crash. As a result, any application or server using libsoup could be forced to exit unexpectedly, creating a denial-of-service (DoS) risk. |
| A flaw was found in libsoup, where the soup_multipart_new_from_message() function is vulnerable to an out-of-bounds read. This flaw allows a malicious HTTP client to induce the libsoup server to read out of bounds. |
| A flaw was found in libsoup, where the soup_headers_parse_request() function may be vulnerable to an out-of-bound read. This flaw allows a malicious user to use a specially crafted HTTP request to crash the HTTP server. |
| A flaw was found in libsoup. The package is vulnerable to a heap buffer over-read when sniffing content via the skip_insight_whitespace() function. Libsoup clients may read one byte out-of-bounds in response to a crafted HTTP response by an HTTP server. |
| A flaw was found in libsoup. The HTTP/2 server in libsoup may not fully validate the values of pseudo-headers :scheme, :authority, and :path, which may allow a user to cause a denial of service (DoS). |
| A flaw was found in libsoup. When handling cookies, libsoup clients mistakenly allow cookies to be set for public suffix domains if the domain contains at least two components and includes an uppercase character. This bypasses public suffix protections and could allow a malicious website to set cookies for domains it does not own, potentially leading to integrity issues such as session fixation. |
| A flaw was found in libsoup. The implementation of HTTP range requests is vulnerable to a resource consumption attack. This flaw allows a malicious client to request the same range many times in a single HTTP request, causing the server to use large amounts of memory. This does not allow for a full denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
trace_spmi_write_begin() and trace_spmi_read_end() both call
memcpy() with a length of "len + 1". This leads to one extra
byte being read beyond the end of the specified buffer. Fix
this out-of-bound memory access by using a length of "len"
instead.
Here is a KASAN log showing the issue:
BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_spmi_read_end+0x1d0/0x234
Read of size 2 at addr ffffffc0265b7540 by task thermal@2.0-ser/1314
...
Call trace:
dump_backtrace+0x0/0x3e8
show_stack+0x2c/0x3c
dump_stack_lvl+0xdc/0x11c
print_address_description+0x74/0x384
kasan_report+0x188/0x268
kasan_check_range+0x270/0x2b0
memcpy+0x90/0xe8
trace_event_raw_event_spmi_read_end+0x1d0/0x234
spmi_read_cmd+0x294/0x3ac
spmi_ext_register_readl+0x84/0x9c
regmap_spmi_ext_read+0x144/0x1b0 [regmap_spmi]
_regmap_raw_read+0x40c/0x754
regmap_raw_read+0x3a0/0x514
regmap_bulk_read+0x418/0x494
adc5_gen3_poll_wait_hs+0xe8/0x1e0 [qcom_spmi_adc5_gen3]
...
__arm64_sys_read+0x4c/0x60
invoke_syscall+0x80/0x218
el0_svc_common+0xec/0x1c8
...
addr ffffffc0265b7540 is located in stack of task thermal@2.0-ser/1314 at offset 32 in frame:
adc5_gen3_poll_wait_hs+0x0/0x1e0 [qcom_spmi_adc5_gen3]
this frame has 1 object:
[32, 33) 'status'
Memory state around the buggy address:
ffffffc0265b7400: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
ffffffc0265b7480: 04 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffc0265b7500: 00 00 00 00 f1 f1 f1 f1 01 f3 f3 f3 00 00 00 00
^
ffffffc0265b7580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0265b7600: f1 f1 f1 f1 01 f2 07 f2 f2 f2 01 f3 00 00 00 00
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
KASAN reports:
[ 4.668325][ T0] BUG: KASAN: wild-memory-access in dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497)
[ 4.676149][ T0] Read of size 8 at addr 1fffffff85115558 by task swapper/0/0
[ 4.683454][ T0]
[ 4.685638][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc3-00004-g0e862838f290 #1
[ 4.694331][ T0] Hardware name: Supermicro SYS-5018D-FN4T/X10SDV-8C-TLN4F, BIOS 1.1 03/02/2016
[ 4.703196][ T0] Call Trace:
[ 4.706334][ T0] <TASK>
[ 4.709133][ T0] ? dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497)
after converting the type of the first argument (@nr, bit number)
of arch_test_bit() from `long` to `unsigned long`[0].
Under certain conditions (for example, when ACPI NUMA is disabled
via command line), pxm_to_node() can return %NUMA_NO_NODE (-1).
It is valid 'magic' number of NUMA node, but not valid bit number
to use in bitops.
node_online() eventually descends to test_bit() without checking
for the input, assuming it's on caller side (which might be good
for perf-critical tasks). There, -1 becomes %ULONG_MAX which leads
to an insane array index when calculating bit position in memory.
For now, add an explicit check for @node being not %NUMA_NO_NODE
before calling test_bit(). The actual logics didn't change here
at all.
[0] https://github.com/norov/linux/commit/0e862838f290147ea9c16db852d8d494b552d38d |
| A buffer overflow vulnerability exists in the TOTOLINK A950RG Router firmware V5.9c.4592_B20191022_ALL within the `global.so` binary. The `getSaveConfig` function retrieves the `http_host` parameter from user input via `websGetVar` and copies it into a fixed-size stack buffer (`v13`) using `strcpy()` without performing any length checks. An unauthenticated remote attacker can exploit this vulnerability by sending a specially crafted HTTP request to the router's web interface, potentially leading to arbitrary code execution. |
