| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: fix use after free bugs
After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is accessed
after the peak_usb_netif_rx_ni().
Reordering the lines solves the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
can: vxcan: vxcan_xmit: fix use after free bug
After calling netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the canfd_frame cfd which aliases skb memory is accessed
after the netif_rx_ni(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: dev: can_restart: fix use after free bug
After calling netif_rx_ni(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is accessed
after the netif_rx_ni() in:
stats->rx_bytes += cf->len;
Reordering the lines solves the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
jffs2: fix use-after-free in jffs2_clear_xattr_subsystem
When we mount a jffs2 image, assume that the first few blocks of
the image are normal and contain at least one xattr-related inode,
but the next block is abnormal. As a result, an error is returned
in jffs2_scan_eraseblock(). jffs2_clear_xattr_subsystem() is then
called in jffs2_build_filesystem() and then again in
jffs2_do_fill_super().
Finally we can observe the following report:
==================================================================
BUG: KASAN: use-after-free in jffs2_clear_xattr_subsystem+0x95/0x6ac
Read of size 8 at addr ffff8881243384e0 by task mount/719
Call Trace:
dump_stack+0x115/0x16b
jffs2_clear_xattr_subsystem+0x95/0x6ac
jffs2_do_fill_super+0x84f/0xc30
jffs2_fill_super+0x2ea/0x4c0
mtd_get_sb+0x254/0x400
mtd_get_sb_by_nr+0x4f/0xd0
get_tree_mtd+0x498/0x840
jffs2_get_tree+0x25/0x30
vfs_get_tree+0x8d/0x2e0
path_mount+0x50f/0x1e50
do_mount+0x107/0x130
__se_sys_mount+0x1c5/0x2f0
__x64_sys_mount+0xc7/0x160
do_syscall_64+0x45/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Allocated by task 719:
kasan_save_stack+0x23/0x60
__kasan_kmalloc.constprop.0+0x10b/0x120
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0x1c0/0x870
jffs2_alloc_xattr_ref+0x2f/0xa0
jffs2_scan_medium.cold+0x3713/0x4794
jffs2_do_mount_fs.cold+0xa7/0x2253
jffs2_do_fill_super+0x383/0xc30
jffs2_fill_super+0x2ea/0x4c0
[...]
Freed by task 719:
kmem_cache_free+0xcc/0x7b0
jffs2_free_xattr_ref+0x78/0x98
jffs2_clear_xattr_subsystem+0xa1/0x6ac
jffs2_do_mount_fs.cold+0x5e6/0x2253
jffs2_do_fill_super+0x383/0xc30
jffs2_fill_super+0x2ea/0x4c0
[...]
The buggy address belongs to the object at ffff8881243384b8
which belongs to the cache jffs2_xattr_ref of size 48
The buggy address is located 40 bytes inside of
48-byte region [ffff8881243384b8, ffff8881243384e8)
[...]
==================================================================
The triggering of the BUG is shown in the following stack:
-----------------------------------------------------------
jffs2_fill_super
jffs2_do_fill_super
jffs2_do_mount_fs
jffs2_build_filesystem
jffs2_scan_medium
jffs2_scan_eraseblock <--- ERROR
jffs2_clear_xattr_subsystem <--- free
jffs2_clear_xattr_subsystem <--- free again
-----------------------------------------------------------
An error is returned in jffs2_do_mount_fs(). If the error is returned
by jffs2_sum_init(), the jffs2_clear_xattr_subsystem() does not need to
be executed. If the error is returned by jffs2_build_filesystem(), the
jffs2_clear_xattr_subsystem() also does not need to be executed again.
So move jffs2_clear_xattr_subsystem() from 'out_inohash' to 'out_root'
to fix this UAF problem. |
| In the Linux kernel, the following vulnerability has been resolved:
media: davinci: vpif: fix use-after-free on driver unbind
The driver allocates and registers two platform device structures during
probe, but the devices were never deregistered on driver unbind.
This results in a use-after-free on driver unbind as the device
structures were allocated using devres and would be freed by driver
core when remove() returns.
Fix this by adding the missing deregistration calls to the remove()
callback and failing probe on registration errors.
Note that the platform device structures must be freed using a proper
release callback to avoid leaking associated resources like device
names. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "Revert "block, bfq: honor already-setup queue merges""
A crash [1] happened to be triggered in conjunction with commit
2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The
latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq:
honor already-setup queue merges""). Yet, the reverted commit was not
the one introducing the bug. In fact, it actually triggered a UAF
introduced by a different commit, and now fixed by commit d29bd41428cf
("block, bfq: reset last_bfqq_created on group change").
So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq:
honor already-setup queue merges") out. This commit restores it.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214503 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Zap _all_ roots when unmapping gfn range in TDP MMU
Zap both valid and invalid roots when zapping/unmapping a gfn range, as
KVM must ensure it holds no references to the freed page after returning
from the unmap operation. Most notably, the TDP MMU doesn't zap invalid
roots in mmu_notifier callbacks. This leads to use-after-free and other
issues if the mmu_notifier runs to completion while an invalid root
zapper yields as KVM fails to honor the requirement that there must be
_no_ references to the page after the mmu_notifier returns.
The bug is most easily reproduced by hacking KVM to cause a collision
between set_nx_huge_pages() and kvm_mmu_notifier_release(), but the bug
exists between kvm_mmu_notifier_invalidate_range_start() and memslot
updates as well. Invalidating a root ensures pages aren't accessible by
the guest, and KVM won't read or write page data itself, but KVM will
trigger e.g. kvm_set_pfn_dirty() when zapping SPTEs, and thus completing
a zap of an invalid root _after_ the mmu_notifier returns is fatal.
WARNING: CPU: 24 PID: 1496 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:173 [kvm]
RIP: 0010:kvm_is_zone_device_pfn+0x96/0xa0 [kvm]
Call Trace:
<TASK>
kvm_set_pfn_dirty+0xa8/0xe0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
zap_gfn_range+0x1f3/0x310 [kvm]
kvm_tdp_mmu_zap_invalidated_roots+0x50/0x90 [kvm]
kvm_mmu_zap_all_fast+0x177/0x1a0 [kvm]
set_nx_huge_pages+0xb4/0x190 [kvm]
param_attr_store+0x70/0x100
module_attr_store+0x19/0x30
kernfs_fop_write_iter+0x119/0x1b0
new_sync_write+0x11c/0x1b0
vfs_write+0x1cc/0x270
ksys_write+0x5f/0xe0
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA: Fix use-after-free in rxe_queue_cleanup
On error handling path in rxe_qp_from_init() qp->sq.queue is freed and
then rxe_create_qp() will drop last reference to this object. qp clean up
function will try to free this queue one time and it causes UAF bug.
Fix it by zeroing queue pointer after freeing queue in rxe_qp_from_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix a user-after-free in add_pble_prm
When irdma_hmc_sd_one fails, 'chunk' is freed while its still on the PBLE
info list.
Add the chunk entry to the PBLE info list only after successful setting of
the SD in irdma_hmc_sd_one. |
| In the Linux kernel, the following vulnerability has been resolved:
sch_cake: do not call cake_destroy() from cake_init()
qdiscs are not supposed to call their own destroy() method
from init(), because core stack already does that.
syzbot was able to trigger use after free:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock_common kernel/locking/mutex.c:586 [inline]
WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740
Modules linked in:
CPU: 0 PID: 21902 Comm: syz-executor189 Not tainted 5.16.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__mutex_lock_common kernel/locking/mutex.c:586 [inline]
RIP: 0010:__mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740
Code: 08 84 d2 0f 85 19 08 00 00 8b 05 97 38 4b 04 85 c0 0f 85 27 f7 ff ff 48 c7 c6 20 00 ac 89 48 c7 c7 a0 fe ab 89 e8 bf 76 ba ff <0f> 0b e9 0d f7 ff ff 48 8b 44 24 40 48 8d b8 c8 08 00 00 48 89 f8
RSP: 0018:ffffc9000627f290 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88802315d700 RSI: ffffffff815f1db8 RDI: fffff52000c4fe44
RBP: ffff88818f28e000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815ebb5e R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: ffffc9000627f458 R15: 0000000093c30000
FS: 0000555556abc400(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fda689c3303 CR3: 000000001cfbb000 CR4: 0000000000350ef0
Call Trace:
<TASK>
tcf_chain0_head_change_cb_del+0x2e/0x3d0 net/sched/cls_api.c:810
tcf_block_put_ext net/sched/cls_api.c:1381 [inline]
tcf_block_put_ext net/sched/cls_api.c:1376 [inline]
tcf_block_put+0xbc/0x130 net/sched/cls_api.c:1394
cake_destroy+0x3f/0x80 net/sched/sch_cake.c:2695
qdisc_create.constprop.0+0x9da/0x10f0 net/sched/sch_api.c:1293
tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660
rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x904/0xdf0 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
___sys_sendmsg+0xf3/0x170 net/socket.c:2463
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f1bb06badb9
Code: Unable to access opcode bytes at RIP 0x7f1bb06bad8f.
RSP: 002b:00007fff3012a658 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1bb06badb9
RDX: 0000000000000000 RSI: 00000000200007c0 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000003
R10: 0000000000000003 R11: 0000000000000246 R12: 00007fff3012a688
R13: 00007fff3012a6a0 R14: 00007fff3012a6e0 R15: 00000000000013c2
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix use-after-free bug in hclgevf_send_mbx_msg
Currently, the hns3_remove function firstly uninstall client instance,
and then uninstall acceletion engine device. The netdevice is freed in
client instance uninstall process, but acceletion engine device uninstall
process still use it to trace runtime information. This causes a use after
free problem.
So fixes it by check the instance register state to avoid use after free. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect()
The free_rtllib() function frees the "dev" pointer so there is use
after free on the next line. Re-arrange things to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: avoid bpf_prog refcount underflow
Ice driver has the routines for managing XDP resources that are shared
between ndo_bpf op and VSI rebuild flow. The latter takes place for
example when user changes queue count on an interface via ethtool's
set_channels().
There is an issue around the bpf_prog refcounting when VSI is being
rebuilt - since ice_prepare_xdp_rings() is called with vsi->xdp_prog as
an argument that is used later on by ice_vsi_assign_bpf_prog(), same
bpf_prog pointers are swapped with each other. Then it is also
interpreted as an 'old_prog' which in turn causes us to call
bpf_prog_put on it that will decrement its refcount.
Below splat can be interpreted in a way that due to zero refcount of a
bpf_prog it is wiped out from the system while kernel still tries to
refer to it:
[ 481.069429] BUG: unable to handle page fault for address: ffffc9000640f038
[ 481.077390] #PF: supervisor read access in kernel mode
[ 481.083335] #PF: error_code(0x0000) - not-present page
[ 481.089276] PGD 100000067 P4D 100000067 PUD 1001cb067 PMD 106d2b067 PTE 0
[ 481.097141] Oops: 0000 [#1] PREEMPT SMP PTI
[ 481.101980] CPU: 12 PID: 3339 Comm: sudo Tainted: G OE 5.15.0-rc5+ #1
[ 481.110840] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016
[ 481.122021] RIP: 0010:dev_xdp_prog_id+0x25/0x40
[ 481.127265] Code: 80 00 00 00 00 0f 1f 44 00 00 89 f6 48 c1 e6 04 48 01 fe 48 8b 86 98 08 00 00 48 85 c0 74 13 48 8b 50 18 31 c0 48 85 d2 74 07 <48> 8b 42 38 8b 40 20 c3 48 8b 96 90 08 00 00 eb e8 66 2e 0f 1f 84
[ 481.148991] RSP: 0018:ffffc90007b63868 EFLAGS: 00010286
[ 481.155034] RAX: 0000000000000000 RBX: ffff889080824000 RCX: 0000000000000000
[ 481.163278] RDX: ffffc9000640f000 RSI: ffff889080824010 RDI: ffff889080824000
[ 481.171527] RBP: ffff888107af7d00 R08: 0000000000000000 R09: ffff88810db5f6e0
[ 481.179776] R10: 0000000000000000 R11: ffff8890885b9988 R12: ffff88810db5f4bc
[ 481.188026] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 481.196276] FS: 00007f5466d5bec0(0000) GS:ffff88903fb00000(0000) knlGS:0000000000000000
[ 481.205633] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 481.212279] CR2: ffffc9000640f038 CR3: 000000014429c006 CR4: 00000000003706e0
[ 481.220530] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 481.228771] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 481.237029] Call Trace:
[ 481.239856] rtnl_fill_ifinfo+0x768/0x12e0
[ 481.244602] rtnl_dump_ifinfo+0x525/0x650
[ 481.249246] ? __alloc_skb+0xa5/0x280
[ 481.253484] netlink_dump+0x168/0x3c0
[ 481.257725] netlink_recvmsg+0x21e/0x3e0
[ 481.262263] ____sys_recvmsg+0x87/0x170
[ 481.266707] ? __might_fault+0x20/0x30
[ 481.271046] ? _copy_from_user+0x66/0xa0
[ 481.275591] ? iovec_from_user+0xf6/0x1c0
[ 481.280226] ___sys_recvmsg+0x82/0x100
[ 481.284566] ? sock_sendmsg+0x5e/0x60
[ 481.288791] ? __sys_sendto+0xee/0x150
[ 481.293129] __sys_recvmsg+0x56/0xa0
[ 481.297267] do_syscall_64+0x3b/0xc0
[ 481.301395] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 481.307238] RIP: 0033:0x7f5466f39617
[ 481.311373] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb bd 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2f 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[ 481.342944] RSP: 002b:00007ffedc7f4308 EFLAGS: 00000246 ORIG_RAX: 000000000000002f
[ 481.361783] RAX: ffffffffffffffda RBX: 00007ffedc7f5460 RCX: 00007f5466f39617
[ 481.380278] RDX: 0000000000000000 RSI: 00007ffedc7f5360 RDI: 0000000000000003
[ 481.398500] RBP: 00007ffedc7f53f0 R08: 0000000000000000 R09: 000055d556f04d50
[ 481.416463] R10: 0000000000000077 R11: 0000000000000246 R12: 00007ffedc7f5360
[ 481.434131] R13: 00007ffedc7f5350 R14: 00007ffedc7f5344 R15: 0000000000000e98
[ 481.451520] Modules linked in: ice
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux,
a bug is reported:
==================================================================
BUG: Unable to handle kernel data access on read at 0x80000800805b502c
Oops: Kernel access of bad area, sig: 11 [#1]
NIP [c0000000000388a4] .ioread32+0x4/0x20
LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl]
Call Trace:
.free_irq+0x1c/0x4e0 (unreliable)
.ata_host_stop+0x74/0xd0 [libata]
.release_nodes+0x330/0x3f0
.device_release_driver_internal+0x178/0x2c0
.driver_detach+0x64/0xd0
.bus_remove_driver+0x70/0xf0
.driver_unregister+0x38/0x80
.platform_driver_unregister+0x14/0x30
.fsl_sata_driver_exit+0x18/0xa20 [sata_fsl]
.__se_sys_delete_module+0x1ec/0x2d0
.system_call_exception+0xfc/0x1f0
system_call_common+0xf8/0x200
==================================================================
The triggering of the BUG is shown in the following stack:
driver_detach
device_release_driver_internal
__device_release_driver
drv->remove(dev) --> platform_drv_remove/platform_remove
drv->remove(dev) --> sata_fsl_remove
iounmap(host_priv->hcr_base); <---- unmap
kfree(host_priv); <---- free
devres_release_all
release_nodes
dr->node.release(dev, dr->data) --> ata_host_stop
ap->ops->port_stop(ap) --> sata_fsl_port_stop
ioread32(hcr_base + HCONTROL) <---- UAF
host->ops->host_stop(host)
The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should
not be executed in drv->remove. These functions should be executed in
host_stop after port_stop. Therefore, we move these functions to the
new function sata_fsl_host_stop and bind the new function to host_stop. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()
In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and
tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv().
After that mlx4_en_alloc_resources() is called and there is a dereference
of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to
a use after free problem on failure of mlx4_en_copy_priv().
Fix this bug by adding a check of mlx4_en_copy_priv()
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_MLX4_EN=m show no new warnings,
and our static analyzer no longer warns about this code. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: liteuart: fix use-after-free and memleak on unbind
Deregister the port when unbinding the driver to prevent it from being
used after releasing the driver data and leaking memory allocated by
serial core. |
| In the Linux kernel, the following vulnerability has been resolved:
can: sja1000: fix use after free in ems_pcmcia_add_card()
If the last channel is not available then "dev" is freed. Fortunately,
we can just use "pdev->irq" instead.
Also we should check if at least one channel was set up. |
| In the Linux kernel, the following vulnerability has been resolved:
can: pch_can: pch_can_rx_normal: fix use after free
After calling netif_receive_skb(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is dereferenced
just after the call netif_receive_skb(skb).
Reordering the lines solves the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: do not perform operations on net devices being unregistered
There is a short period between a net device starts to be unregistered
and when it is actually gone. In that time frame ethtool operations
could still be performed, which might end up in unwanted or undefined
behaviours[1].
Do not allow ethtool operations after a net device starts its
unregistration. This patch targets the netlink part as the ioctl one
isn't affected: the reference to the net device is taken and the
operation is executed within an rtnl lock section and the net device
won't be found after unregister.
[1] For example adding Tx queues after unregister ends up in NULL
pointer exceptions and UaFs, such as:
BUG: KASAN: use-after-free in kobject_get+0x14/0x90
Read of size 1 at addr ffff88801961248c by task ethtool/755
CPU: 0 PID: 755 Comm: ethtool Not tainted 5.15.0-rc6+ #778
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/014
Call Trace:
dump_stack_lvl+0x57/0x72
print_address_description.constprop.0+0x1f/0x140
kasan_report.cold+0x7f/0x11b
kobject_get+0x14/0x90
kobject_add_internal+0x3d1/0x450
kobject_init_and_add+0xba/0xf0
netdev_queue_update_kobjects+0xcf/0x200
netif_set_real_num_tx_queues+0xb4/0x310
veth_set_channels+0x1c3/0x550
ethnl_set_channels+0x524/0x610 |
| In the Linux kernel, the following vulnerability has been resolved:
aio: fix use-after-free due to missing POLLFREE handling
signalfd_poll() and binder_poll() are special in that they use a
waitqueue whose lifetime is the current task, rather than the struct
file as is normally the case. This is okay for blocking polls, since a
blocking poll occurs within one task; however, non-blocking polls
require another solution. This solution is for the queue to be cleared
before it is freed, by sending a POLLFREE notification to all waiters.
Unfortunately, only eventpoll handles POLLFREE. A second type of
non-blocking poll, aio poll, was added in kernel v4.18, and it doesn't
handle POLLFREE. This allows a use-after-free to occur if a signalfd or
binder fd is polled with aio poll, and the waitqueue gets freed.
Fix this by making aio poll handle POLLFREE.
A patch by Ramji Jiyani <ramjiyani@google.com>
(https://lore.kernel.org/r/20211027011834.2497484-1-ramjiyani@google.com)
tried to do this by making aio_poll_wake() always complete the request
inline if POLLFREE is seen. However, that solution had two bugs.
First, it introduced a deadlock, as it unconditionally locked the aio
context while holding the waitqueue lock, which inverts the normal
locking order. Second, it didn't consider that POLLFREE notifications
are missed while the request has been temporarily de-queued.
The second problem was solved by my previous patch. This patch then
properly fixes the use-after-free by handling POLLFREE in a
deadlock-free way. It does this by taking advantage of the fact that
freeing of the waitqueue is RCU-delayed, similar to what eventpoll does. |
