| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: fix stuck flows on cleanup due to pending work
To clear the flow table on flow table free, the following sequence
normally happens in order:
1) gc_step work is stopped to disable any further stats/del requests.
2) All flow table entries are set to teardown state.
3) Run gc_step which will queue HW del work for each flow table entry.
4) Waiting for the above del work to finish (flush).
5) Run gc_step again, deleting all entries from the flow table.
6) Flow table is freed.
But if a flow table entry already has pending HW stats or HW add work
step 3 will not queue HW del work (it will be skipped), step 4 will wait
for the pending add/stats to finish, and step 5 will queue HW del work
which might execute after freeing of the flow table.
To fix the above, this patch flushes the pending work, then it sets the
teardown flag to all flows in the flowtable and it forces a garbage
collector run to queue work to remove the flows from hardware, then it
flushes this new pending work and (finally) it forces another garbage
collector run to remove the entry from the software flowtable.
Stack trace:
[47773.882335] BUG: KASAN: use-after-free in down_read+0x99/0x460
[47773.883634] Write of size 8 at addr ffff888103b45aa8 by task kworker/u20:6/543704
[47773.885634] CPU: 3 PID: 543704 Comm: kworker/u20:6 Not tainted 5.12.0-rc7+ #2
[47773.886745] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
[47773.888438] Workqueue: nf_ft_offload_del flow_offload_work_handler [nf_flow_table]
[47773.889727] Call Trace:
[47773.890214] dump_stack+0xbb/0x107
[47773.890818] print_address_description.constprop.0+0x18/0x140
[47773.892990] kasan_report.cold+0x7c/0xd8
[47773.894459] kasan_check_range+0x145/0x1a0
[47773.895174] down_read+0x99/0x460
[47773.899706] nf_flow_offload_tuple+0x24f/0x3c0 [nf_flow_table]
[47773.907137] flow_offload_work_handler+0x72d/0xbe0 [nf_flow_table]
[47773.913372] process_one_work+0x8ac/0x14e0
[47773.921325]
[47773.921325] Allocated by task 592159:
[47773.922031] kasan_save_stack+0x1b/0x40
[47773.922730] __kasan_kmalloc+0x7a/0x90
[47773.923411] tcf_ct_flow_table_get+0x3cb/0x1230 [act_ct]
[47773.924363] tcf_ct_init+0x71c/0x1156 [act_ct]
[47773.925207] tcf_action_init_1+0x45b/0x700
[47773.925987] tcf_action_init+0x453/0x6b0
[47773.926692] tcf_exts_validate+0x3d0/0x600
[47773.927419] fl_change+0x757/0x4a51 [cls_flower]
[47773.928227] tc_new_tfilter+0x89a/0x2070
[47773.936652]
[47773.936652] Freed by task 543704:
[47773.937303] kasan_save_stack+0x1b/0x40
[47773.938039] kasan_set_track+0x1c/0x30
[47773.938731] kasan_set_free_info+0x20/0x30
[47773.939467] __kasan_slab_free+0xe7/0x120
[47773.940194] slab_free_freelist_hook+0x86/0x190
[47773.941038] kfree+0xce/0x3a0
[47773.941644] tcf_ct_flow_table_cleanup_work
Original patch description and stack trace by Paul Blakey. |
| Use after free in V8 in Google Chrome prior to 141.0.7390.54 allowed a remote attacker to potentially perform out of bounds memory access via a crafted HTML page. (Chromium security severity: Low) |
| Object lifecycle issue in Media in Google Chrome prior to 142.0.7444.59 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: High) |
| Inappropriate implementation in V8 in Google Chrome prior to 142.0.7444.59 allowed a remote attacker to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High) |
| A vulnerability has been identified in Spectrum Power 4 (All versions < V4.70 SP12 Update 2). The affected application is vulnerable to run arbitrary commands via the user interface. This user interface can be used via the network and allows the execution of commands as administrative application user. |
| In the Linux kernel, the following vulnerability has been resolved:
tee: amdtee: fix race condition in amdtee_open_session
There is a potential race condition in amdtee_open_session that may
lead to use-after-free. For instance, in amdtee_open_session() after
sess->sess_mask is set, and before setting:
sess->session_info[i] = session_info;
if amdtee_close_session() closes this same session, then 'sess' data
structure will be released, causing kernel panic when 'sess' is
accessed within amdtee_open_session().
The solution is to set the bit sess->sess_mask as the last step in
amdtee_open_session(). |
| A flaw was found in Yelp. The Gnome user help application allows the help document to execute arbitrary scripts. This vulnerability allows malicious users to input help documents, which may exfiltrate user files to an external environment. |
| A NULL pointer dereference vulnerability was found in libxml2 when processing XPath XML expressions. This flaw allows an attacker to craft a malicious XML input to libxml2, leading to a denial of service. |
| An issue was discovered in NPU in Samsung Mobile Processor Exynos 1380 through July 2025. There is an Untrusted Pointer Dereference of src_hdr in the copy_ncp_header function. |
| An access to an uninitialized pointer flaw was found in X.Org and Xwayland. The function compCheckRedirect() may fail if it cannot allocate the backing pixmap. In that case, compRedirectWindow() will return a BadAlloc error without validating the window tree marked just before, which leaves the validated data partly initialized and the use of an uninitialized pointer later. |
| To trigger the issue, three configuration parameters must have specific settings: "hostname-char-set" must be left at the default setting, which is "[^A-Za-z0-9.-]"; "hostname-char-replacement" must be empty (the default); and "ddns-qualifying-suffix" must *NOT* be empty (the default is empty). DDNS updates do not need to be enabled for this issue to manifest. A client that sends certain option content would then cause kea-dhcp4 to exit unexpectedly.
This issue affects Kea versions 3.0.1 through 3.0.1 and 3.1.1 through 3.1.2. |
| An out-of-bounds read vulnerability exists in the PORT command parameter extraction functionality of Weston Embedded uC-FTPs v 1.98.00. A specially-crafted set of network packets can lead to denial of service. An attacker can send packets to trigger this vulnerability.This vulnerability occurs when no port argument is provided to the `PORT` command. |
| An out-of-bounds read vulnerability exists in the PORT command parameter extraction functionality of Weston Embedded uC-FTPs v 1.98.00. A specially-crafted set of network packets can lead to denial of service. An attacker can send packets to trigger this vulnerability.This vulnerability occurs when no IP address argument is provided to the `PORT` command. |
| An issue was discovered in AhciBusDxe in the kernel 5.0 through 5.5 in Insyde InsydeH2O. There is an SMM callout that allows an attacker to access the System Management Mode and execute arbitrary code. This occurs because of Inclusion of Functionality from an Untrusted Control Sphere. |
| A vulnerability exists in SMM (System Management Mode) branch that registers a SWSMI handler that does not sufficiently check or validate the allocated buffer pointer(QWORD values for CommBuffer). This can be used by an attacker to corrupt data in SMRAM memory and even lead to arbitrary code execution. |
| A use-after-free vulnerability exists in the sopen_FAMOS_read functionality of The Biosig Project libbiosig 2.5.0 and Master Branch (ab0ee111). A specially crafted .famos file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability. |
| A command execution vulnerability exists in the tddpd enable_test_mode functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926 and Tp-Link N300 Wireless Access Point (EAP115 V4) v5.0.4 Build 20220216. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.This vulnerability impacts `uclited` on the EAP115(V4) 5.0.4 Build 20220216 of the N300 Wireless Gigabit Access Point. |
| A command execution vulnerability exists in the tddpd enable_test_mode functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926 and Tp-Link N300 Wireless Access Point (EAP115 V4) v5.0.4 Build 20220216. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.This vulnerability impacts `uclited` on the EAP225(V3) 5.1.0 Build 20220926 of the AC1350 Wireless MU-MIMO Gigabit Access Point. |
| An vulnerability in the handling of Latex exists in Ankitects Anki 24.04. When Latex is sanitized to prevent unsafe commands, the verbatim package, which comes installed by default in many Latex distributions, has been overlooked. A specially crafted flashcard can lead to an arbitrary file read. An attacker can share a flashcard to trigger this vulnerability. |
| The ctl_report_supported_opcodes function did not sufficiently validate a field provided by userspace, allowing an arbitrary write to a limited amount of kernel help memory.
Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host. |
