| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was identified in dloebl CGIF up to 0.5.2. This vulnerability affects the function cgif_addframe of the file src/cgif.c of the component GIF Image Handler. The manipulation of the argument width/height leads to integer overflow. The attack may be initiated remotely. The identifier of the patch is b0ba830093f4317a5d1f345715d2fa3cd2dab474. It is suggested to install a patch to address this issue. |
| An unauthenticated attacker who can access either the HTTP service (TCP port 80), the HTTPS service (TCP port 443), or the IPP service (TCP port 631), can leak several pieces of sensitive information from a vulnerable device. The URI path /etc/mnt_info.csv can be accessed via a GET request and no authentication is required. The returned result is a comma separated value (CSV) table of information. The leaked information includes the device’s model, firmware version, IP address, and serial number. |
| A vulnerability has been identified in the web-based management interface of AOS-CX switches that could potentially allow an unauthenticated remote actor to circumvent existing authentication controls. In some cases this could enable resetting the admin password. |
| A vulnerability has been found in wandb OpenUI up to 0.0.0.0/1.0. This impacts an unknown function of the file backend/openui/config.py. The manipulation of the argument LITELLM_MASTER_KEY leads to hard-coded credentials. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Ella Core is a 5G core designed for private networks. Versions prior to 1.7.0 panic when processing a specially crafted NGAP LocationReport message. An attacker able to send crafted NGAP messages to Ella Core can crash the process, causing service disruption for all connected subscribers. Version 1.7.0 adds guards in NGAP Location Report handler. |
| The Honeywell IQ4x building management controller, exposes its full web-based HMI without authentication in its factory-default configuration. With no user module configured, security is disabled by design and the system operates under a System Guest (level 100) context, granting read/write privileges to any party able to reach the HTTP interface. Authentication controls are only enforced after a web user is created via U.htm, which dynamically enables the user module. Because this function is accessible prior to authentication, a remote user can create a new account with administrative read/write permissions enabling the user module and imposing authentication under attacker-controlled credentials. This action can effectively lock legitimate operators out of local and web-based configuration and administration. |
| Statmatic is a Laravel and Git powered content management system (CMS). Versions 5.73.8 and below in addition to 6.0.0-alpha.1 through 6.3.1 have a Stored XSS vulnerability in html fieldtypes which allows authenticated users with field management permissions to inject malicious JavaScript that executes when viewed by higher-privileged users. This issue has been fixed in 6.3.2 and 5.73.9. |
| Apache NiFi 1.1.0 through 2.7.2 are missing authorization when updating configuration properties on extension components that have specific Required Permissions based on the Restricted annotation. The Restricted annotation indicates additional privileges required to add the annotated component to the flow configuration, but framework authorization did not check restricted status when updating a component previously added. The missing authorization requires a more privileged user to add a restricted component to the flow configuration, but permits a less privileged user to make property configuration changes. Apache NiFi installations that do not implement different levels of authorization for Restricted components are not subject to this vulnerability because the framework enforces write permissions as the security boundary. Upgrading to Apache NiFi 2.8.0 is the recommended mitigation. |
| Mapscrn 2.0.3 contains a stack-based buffer overflow vulnerability that allows local attackers to execute arbitrary code by supplying an oversized input buffer. Attackers can craft a malicious buffer with junk data, return address, NOP instructions, and shellcode to overflow the stack and achieve code execution or denial of service. |
| Ghidra versions prior to 12.0.3 improperly process annotation directives embedded in automatically extracted binary data, resulting in arbitrary command execution when an analyst interacts with the UI. Specifically, the @execute annotation (which is intended for trusted, user-authored comments) is also parsed in comments generated during auto-analysis (such as CFStrings in Mach-O binaries). This allows a crafted binary to present seemingly benign clickable text which, when clicked, executes attacker-controlled commands on the analyst’s machine. |
| Tandoor Recipes is an application for managing recipes, planning meals, and building shopping lists. Versions up to and including 2.5.3 set ALLOWED_HOSTS = '*' by default, which causes Django to accept any value in the HTTP Host header without validation. The application uses request.build_absolute_uri() to generate absolute URLs in multiple contexts, including invite link emails, API pagination, and OpenAPI schema generation. An attacker who can send requests to the application with a crafted Host header can manipulate all server-generated absolute URLs. The most critical impact is invite link poisoning: when an admin creates an invite and the application sends the invite email, the link points to the attacker's server instead of the real application. When the victim clicks the link, the invite token is sent to the attacker, who can then use it at the real application. As of time of publication, it is unknown if a patched version is available. |
| The Delete function fails to properly validate offsets when processing malformed JSON input. This can lead to a negative slice index and a runtime panic, allowing a denial of service attack. |
| An Incorrect Permission Assignment for Critical Resource vulnerability in the On-Box Anomaly detection framework of Juniper Networks Junos OS Evolved on PTX Series allows an unauthenticated, network-based attacker to execute code as root.
The On-Box Anomaly detection framework should only be reachable by other internal processes over the internal routing instance, but not over an externally exposed port. With the ability to access and manipulate the service to execute code as root a remote attacker can take complete control of the device.
Please note that this service is enabled by default as no specific configuration is required.
This issue affects Junos OS Evolved on PTX Series:
* 25.4 versions before 25.4R1-S1-EVO, 25.4R2-EVO.
This issue does not affect Junos OS Evolved versions before 25.4R1-EVO.
This issue does not affect Junos OS. |
| Buffer overflow in FinalWire Ltd AIDA64 Engineer 6.00.5100 allows attackers to execute arbitrary code by creating a crafted input that will overwrite the SEH handler. |
| Hardcoded Password Vulnerability have been found in CENTUM. Affected products contain a hardcoded password for the user account (PROG) used for CENTUM Authentication Mode within the system. Under the following conditions, there is a risk that an attacker could log in as the PROG user.
The default permission for the PROG users is S1 permission (equivalent to OFFUSER). Therefore, for properly permission-controlled targets of operation and monitoring, even if an attacker user in as the PROG user, the risk of critical operations or configuration changes being performed is considered low. (If the PROG user's permissions have been changed for any reason, there is a risk that operations or configuration changes may be performed under the modified permissions. The CVSS values below are for the default permissions.)
Additionally, exploiting this vulnerability requires an attacker to already have access to the HIS screen controls. Therefore, an attacker can already operate and monitor at that point, regardless of this vulnerability.
The conditions under which this vulnerability is exploited:
If all of the following conditions are met, the affected products are vulnerable to this vulnerability.
-An attacker obtains the hardcoded password using a certain method.
-The HIS with the affected product installed is configured in CTM authentication mode.
-An attacker must have direct access to the aforementioned HIS or be able to break into it remotely using a certain method and perform screen operations.
The affected products and versions are as follows: CENTUM VP R5.01.00 to R5.04.20, R6.01.00 to R6.12.00 and R7.01.00. |
| OpenEMR is a free and open source electronic health records and medical practice management application. Prior to version 8.0.0.3, a stored cross-site scripting vulnerability in the CCDA document preview allows an attacker who can upload or send a CCDA document to execute arbitrary JavaScript in a clinician's browser session when the document is previewed. The XSL stylesheet sanitizes attributes for all other narrative elements but not for `linkHtml`, allowing `href="javascript:..."` and event handler attributes to pass through unchanged. Version 8.0.0.3 patches the issue. |
| A weakness has been identified in Orc discount up to 3.0.1.2. This issue affects the function compile of the file markdown.c of the component Markdown Handler. This manipulation causes uncontrolled recursion. The attack is restricted to local execution. The exploit has been made available to the public and could be used for attacks. The project maintainer confirms: "[I]f you feed it an infinitely deep blockquote input it will crash. (...) [T]his is a duplicate of an old bug that I've been working on." |
| A security flaw has been discovered in Netcore Power 15AX up to 3.0.0.6938. Affected by this issue is the function setTools of the file /bin/netis.cgi of the component Diagnostic Tool Interface. Performing a manipulation of the argument IpAddr results in os command injection. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Angular SSR is a server-rise rendering tool for Angular applications. Versions on the 22.x branch prior to 22.0.0-next.2, the 21.x branch prior to 21.2.3, and the 20.x branch prior to 20.3.21 have an Open Redirect vulnerability in `@angular/ssr` due to an incomplete fix for CVE-2026-27738. While the original fix successfully blocked multiple leading slashes (e.g., `///`), the internal validation logic fails to account for a single backslash (`\`) bypass. When an Angular SSR application is deployed behind a proxy that passes the `X-Forwarded-Prefix` header, an attacker provides a value starting with a single backslash, the internal validation failed to flag the single backslash as invalid, the application prepends a leading forward slash, resulting in a `Location` header containing the URL, and modern browsers interpret the `/\` sequence as `//`, treating it as a protocol-relative URL and redirecting the user to the attacker-controlled domain. Furthermore, the response lacks the `Vary: X-Forwarded-Prefix` header, allowing the malicious redirect to be stored in intermediate caches (Web Cache Poisoning). Versions 22.0.0-next.2, 21.2.3, and 20.3.21 contain a patch. Until the patch is applied, developers should sanitize the `X-Forwarded-Prefix` header in their `server.ts` before the Angular engine processes the request. |
| Ory Keto is am open source authorization server for managing permissions at scale. Prior to version 26.2.0, the GetRelationships API in Ory Keto is vulnerable to SQL injection due to flaws in its pagination implementation. Pagination tokens are encrypted using the secret configured in `secrets.pagination`. An attacker who knows this secret can craft their own tokens, including malicious tokens that lead to SQL injection. If this configuration value is not set, Keto falls back to a hard-coded default pagination encryption secret. Because this default value is publicly known, attackers can generate valid and malicious pagination tokens manually for installations where this secret is not set. This issue can be exploited when GetRelationships API is directly or indirectly accessible to the attacker, the attacker can pass a raw pagination token to the affected API, and the configuration value `secrets.pagination` is not set or known to the attacker. An attacker can execute arbitrary SQL queries through forged pagination tokens. As a first line of defense, immediately configure a custom value for `secrets.pagination` by generating a cryptographically secure random secret. Next, upgrade Keto to a fixed version, 26.2.0 or later, as soon as possible. |
