| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. Prior to version 1.68.1, the nghttp2 library stops reading the incoming data when user facing public API `nghttp2_session_terminate_session` or `nghttp2_session_terminate_session2` is called by the application. They might be called internally by the library when it detects the situation that is subject to connection error. Due to the missing internal state validation, the library keeps reading the rest of the data after one of those APIs is called. Then receiving a malformed frame that causes FRAME_SIZE_ERROR causes assertion failure. nghttp2 v1.68.1 adds missing state validation to avoid assertion failure. No known workarounds are available. |
| The Code Embed plugin for WordPress is vulnerable to Stored Cross-Site Scripting via custom field meta values in all versions up to, and including, 2.5.1. This is due to the plugin's sanitization function `sec_check_post_fields()` only running on the `save_post` hook, while WordPress allows custom fields to be added via the `wp_ajax_add_meta` AJAX endpoint without triggering `save_post`. The `ce_filter()` function then outputs these unsanitized meta values directly into page content without escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: rivafb: fix divide error in nv3_arb()
A userspace program can trigger the RIVA NV3 arbitration code by calling
the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver
recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz
(derived from the PRAMDAC MCLK PLL) as a divisor without validating it
first.
In a normal setup, state->mclk_khz is provided by the real hardware and is
non-zero. However, an attacker can construct a malicious or misconfigured
device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL
configuration, causing state->mclk_khz to become zero. Once
nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns
calculation causes a divide error and crashes the kernel.
Fix this by checking whether state->mclk_khz is zero and bailing out before
doing the division.
The following log reveals it:
rivafb: setting virtual Y resolution to 2184
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline]
RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546
Call Trace:
nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603
nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline]
CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246
riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779
rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196
fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188
__x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856 |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-core: fix wrong reinitialization of ringbuffer on reopen
dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the
DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which
reinitializes the waitqueue list head to empty.
Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the
same DVR device share it), this orphans any existing waitqueue entries
from io_uring poll or epoll, leaving them with stale prev/next pointers
while the list head is reset to {self, self}.
The waitqueue and spinlock in dvr_buffer are already properly
initialized once in dvb_dmxdev_init(). The open path only needs to
reset the buffer data pointer, size, and read/write positions.
Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct
assignment of data/size and a call to dvb_ringbuffer_reset(), which
properly resets pread, pwrite, and error with correct memory ordering
without touching the waitqueue or spinlock. |
| The import form CSRF vulnerability in MuraCMS through 10.1.10 allows attackers to upload and install malicious form definitions through a CSRF attack. The vulnerable cForm.importform function lacks CSRF token validation, enabling malicious websites to forge file upload requests that install attacker-controlled forms when an authenticated administrator visits a crafted webpage. Full exploitation of this vulnerability would require the victim to select a malicious ZIP file containing form definitions, which can be automatically generated by the exploit page and used to create data collection forms that steal sensitive information. Successful exploitation of the import form CSRF vulnerability could result in the installation of malicious data collection forms on the target MuraCMS website that can steal sensitive user information. When an authenticated administrator visits a malicious webpage containing the CSRF exploit and selects the attacker-generated ZIP file, their browser uploads and installs form definitions that create legitimate forms that could be designed with malicious content. |
| Glances is an open-source system cross-platform monitoring tool. Prior to version 4.5.2, in Central Browser mode, the `/api/4/serverslist` endpoint returns raw server objects from `GlancesServersList.get_servers_list()`. Those objects are mutated in-place during background polling and can contain a `uri` field with embedded HTTP Basic credentials for downstream Glances servers, using the reusable pbkdf2-derived Glances authentication secret. If the front Glances Browser/API instance is started without `--password`, which is supported and common for internal network deployments, `/api/4/serverslist` is completely unauthenticated. Any network user who can reach the Browser API can retrieve reusable credentials for protected downstream Glances servers once they have been polled by the browser instance. Version 4.5.2 fixes the issue. |
| Glances is an open-source system cross-platform monitoring tool. Prior to version 4.5.2, the Glances REST API web server ships with a default CORS configuration that sets `allow_origins=["*"]` combined with `allow_credentials=True`. When both of these options are enabled together, Starlette's `CORSMiddleware` reflects the requesting `Origin` header value in the `Access-Control-Allow-Origin` response header instead of returning the literal `*` wildcard. This effectively grants any website the ability to make credentialed cross-origin API requests to the Glances server, enabling cross-site data theft of system monitoring information, configuration secrets, and command line arguments from any user who has an active browser session with a Glances instance. Version 4.5.2 fixes the issue. |
| The Post SMTP – Complete Email Deliverability and SMTP Solution with Email Logs, Alerts, Backup SMTP & Mobile App plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘event_type’ parameter in all versions up to, and including, 3.8.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The vulnerability is only exploitable when the Post SMTP Pro plugin is also installed and its Reporting and Tracking extension is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks
As Paolo said earlier [1]:
"Since the blamed commit below, classify can return TC_ACT_CONSUMED while
the current skb being held by the defragmentation engine. As reported by
GangMin Kim, if such packet is that may cause a UaF when the defrag engine
later on tries to tuch again such packet."
act_ct was never meant to be used in the egress path, however some users
are attaching it to egress today [2]. Attempting to reach a middle
ground, we noticed that, while most qdiscs are not handling
TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we
address the issue by only allowing act_ct to bind to clsact/ingress
qdiscs and shared blocks. That way it's still possible to attach act_ct to
egress (albeit only with clsact).
[1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/
[2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: add proper RCU protection to /proc/net/ptype
Yin Fengwei reported an RCU stall in ptype_seq_show() and provided
a patch.
Real issue is that ptype_seq_next() and ptype_seq_show() violate
RCU rules.
ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev
to get device name without any barrier.
At the same time, concurrent writers can remove a packet_type structure
(which is correctly freed after an RCU grace period) and clear pt->dev
without an RCU grace period.
Define ptype_iter_state to carry a dev pointer along seq_net_private:
struct ptype_iter_state {
struct seq_net_private p;
struct net_device *dev; // added in this patch
};
We need to record the device pointer in ptype_get_idx() and
ptype_seq_next() so that ptype_seq_show() is safe against
concurrent pt->dev changes.
We also need to add full RCU protection in ptype_seq_next().
(Missing READ_ONCE() when reading list.next values)
Many thanks to Dong Chenchen for providing a repro. |
| The Add Custom Fields to Media plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 2.0.3. This is due to missing nonce validation on the field deletion functionality in the admin display template. The plugin properly validates a nonce for the 'add field' operation (line 24-36), but the 'delete field' operation (lines 38-49) processes the $_GET['delete'] parameter and calls update_option() without any nonce verification. This makes it possible for unauthenticated attackers to delete arbitrary custom media fields via a forged request, granted they can trick a site administrator into performing an action such as clicking on a link. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. While most alignment records store DNA sequence and quality values, the format also allows them to omit this data in certain cases to save space. Due to some quirks of the CRAM format, it is necessary to handle these records carefully as they will actually store data that needs to be consumed and then discarded. Unfortunately the `cram_decode_seq()` did not handle this correctly in some cases. Where this happened it could result in reading a single byte from beyond the end of a heap allocation, followed by writing a single attacker-controlled byte to the same location. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gro: fix outer network offset
The udp GRO complete stage assumes that all the packets inserted the RX
have the `encapsulation` flag zeroed. Such assumption is not true, as a
few H/W NICs can set such flag when H/W offloading the checksum for
an UDP encapsulated traffic, the tun driver can inject GSO packets with
UDP encapsulation and the problematic layout can also be created via
a veth based setup.
Due to the above, in the problematic scenarios, udp4_gro_complete() uses
the wrong network offset (inner instead of outer) to compute the outer
UDP header pseudo checksum, leading to csum validation errors later on
in packet processing.
Address the issue always clearing the encapsulation flag at GRO completion
time. Such flag will be set again as needed for encapsulated packets by
udp_gro_complete(). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes
During SPO tests, when mounting F2FS, an -EINVAL error was returned from
f2fs_recover_inode_page. The issue occurred under the following scenario
Thread A Thread B
f2fs_ioc_commit_atomic_write
- f2fs_do_sync_file // atomic = true
- f2fs_fsync_node_pages
: last_folio = inode folio
: schedule before folio_lock(last_folio) f2fs_write_checkpoint
- block_operations// writeback last_folio
- schedule before f2fs_flush_nat_entries
: set_fsync_mark(last_folio, 1)
: set_dentry_mark(last_folio, 1)
: folio_mark_dirty(last_folio)
- __write_node_folio(last_folio)
: f2fs_down_read(&sbi->node_write)//block
- f2fs_flush_nat_entries
: {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED)
- unblock_operations
: f2fs_up_write(&sbi->node_write)
f2fs_write_checkpoint//return
: f2fs_do_write_node_page()
f2fs_ioc_commit_atomic_write//return
SPO
Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has
already been written once. However, the {struct nat_entry}->flag did not
have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and
write last_folio again after Thread B finishes f2fs_write_checkpoint.
After SPO and reboot, it was detected that {struct node_info}->blk_addr
was not NULL_ADDR because Thread B successfully write the checkpoint.
This issue only occurs in atomic write scenarios. For regular file
fsync operations, the folio must be dirty. If
block_operations->f2fs_sync_node_pages successfully submit the folio
write, this path will not be executed. Otherwise, the
f2fs_write_checkpoint will need to wait for the folio write submission
to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the
situation where f2fs_need_dentry_mark checks that the {struct
nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has
already been submitted, will not occur.
Therefore, for atomic file fsync, sbi->node_write should be acquired
through __write_node_folio to ensure that the IS_CHECKPOINTED flag
correctly indicates that the checkpoint write has been completed. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Fix stats report corruption on queue count change
The driver and the NIC share a region in memory for stats reporting.
The NIC calculates its offset into this region based on the total size
of the stats region and the size of the NIC's stats.
When the number of queues is changed, the driver's stats region is
resized. If the queue count is increased, the NIC can write past
the end of the allocated stats region, causing memory corruption.
If the queue count is decreased, there is a gap between the driver
and NIC stats, leading to incorrect stats reporting.
This change fixes the issue by allocating stats region with maximum
size, and the offset calculation for NIC stats is changed to match
with the calculation of the NIC. |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: Initialize netdev pointer before queue setup
In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq().
However, the pointer to this structure is stored in oct->props[i].netdev
only after the calls to netif_set_real_num_rx_queues() and
netif_set_real_num_tx_queues().
If either of these functions fails, setup_nic_devices() returns an error
without freeing the allocated netdev. Since oct->props[i].netdev is still
NULL at this point, the cleanup function liquidio_destroy_nic_device()
will fail to find and free the netdev, resulting in a memory leak.
Fix this by initializing oct->props[i].netdev before calling the queue
setup functions. This ensures that the netdev is properly accessible for
cleanup in case of errors.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| Glances is an open-source system cross-platform monitoring tool. Prior to version 4.5.2, in Central Browser mode, Glances stores both the Zeroconf-advertised server name and the discovered IP address for dynamic servers, but later builds connection URIs from the untrusted advertised name instead of the discovered IP. When a dynamic server reports itself as protected, Glances also uses that same untrusted name as the lookup key for saved passwords and the global `[passwords] default` credential. An attacker on the same local network can advertise a fake Glances service over Zeroconf and cause the browser to automatically send a reusable Glances authentication secret to an attacker-controlled host. This affects the background polling path and the REST/WebUI click-through path in Central Browser mode. Version 4.5.2 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix unprivileged local user can do privileged policy management
An unprivileged local user can load, replace, and remove profiles by
opening the apparmorfs interfaces, via a confused deputy attack, by
passing the opened fd to a privileged process, and getting the
privileged process to write to the interface.
This does require a privileged target that can be manipulated to do
the write for the unprivileged process, but once such access is
achieved full policy management is possible and all the possible
implications that implies: removing confinement, DoS of system or
target applications by denying all execution, by-passing the
unprivileged user namespace restriction, to exploiting kernel bugs for
a local privilege escalation.
The policy management interface can not have its permissions simply
changed from 0666 to 0600 because non-root processes need to be able
to load policy to different policy namespaces.
Instead ensure the task writing the interface has privileges that
are a subset of the task that opened the interface. This is already
done via policy for confined processes, but unconfined can delegate
access to the opened fd, by-passing the usual policy check. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: check for deleted cursors when revalidating two btrees
The free space and inode btree repair functions will rebuild both btrees
at the same time, after which it needs to evaluate both btrees to
confirm that the corruptions are gone.
However, Jiaming Zhang ran syzbot and produced a crash in the second
xchk_allocbt call. His root-cause analysis is as follows (with minor
corrections):
In xrep_revalidate_allocbt(), xchk_allocbt() is called twice (first
for BNOBT, second for CNTBT). The cause of this issue is that the
first call nullified the cursor required by the second call.
Let's first enter xrep_revalidate_allocbt() via following call chain:
xfs_file_ioctl() ->
xfs_ioc_scrubv_metadata() ->
xfs_scrub_metadata() ->
`sc->ops->repair_eval(sc)` ->
xrep_revalidate_allocbt()
xchk_allocbt() is called twice in this function. In the first call:
/* Note that sc->sm->sm_type is XFS_SCRUB_TYPE_BNOPT now */
xchk_allocbt() ->
xchk_btree() ->
`bs->scrub_rec(bs, recp)` ->
xchk_allocbt_rec() ->
xchk_allocbt_xref() ->
xchk_allocbt_xref_other()
since sm_type is XFS_SCRUB_TYPE_BNOBT, pur is set to &sc->sa.cnt_cur.
Kernel called xfs_alloc_get_rec() and returned -EFSCORRUPTED. Call
chain:
xfs_alloc_get_rec() ->
xfs_btree_get_rec() ->
xfs_btree_check_block() ->
(XFS_IS_CORRUPT || XFS_TEST_ERROR), the former is false and the latter
is true, return -EFSCORRUPTED. This should be caused by
ioctl$XFS_IOC_ERROR_INJECTION I guess.
Back to xchk_allocbt_xref_other(), after receiving -EFSCORRUPTED from
xfs_alloc_get_rec(), kernel called xchk_should_check_xref(). In this
function, *curpp (points to sc->sa.cnt_cur) is nullified.
Back to xrep_revalidate_allocbt(), since sc->sa.cnt_cur has been
nullified, it then triggered null-ptr-deref via xchk_allocbt() (second
call) -> xchk_btree().
So. The bnobt revalidation failed on a cross-reference attempt, so we
deleted the cntbt cursor, and then crashed when we tried to revalidate
the cntbt. Therefore, check for a null cntbt cursor before that
revalidation, and mark the repair incomplete. Also we can ignore the
second tree entirely if the first tree was rebuilt but is already
corrupt.
Apply the same fix to xrep_revalidate_iallocbt because it has the same
problem. |
| The Post SMTP plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the `handle_office365_oauth_redirect()` function in all versions up to, and including, 3.8.0. This is due to the function being hooked to `admin_init` without any `current_user_can()` check or nonce verification. This makes it possible for authenticated attackers, with Subscriber-level access and above, to overwrite the site's Office 365 OAuth mail configuration (access token, refresh token, and user email) via a crafted URL. The configuration option is used during wizard setup of Microsoft365 SMTP, only available in the Pro option of the plugin. This could cause an Administrator to believe an attacker-controlled Azure app is their own, and lead them to connect the plugin to the attacker's account during configuration after upgrading to Pro. |
