| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/crc-t10dif: fix use of out-of-scope array in crc_t10dif_arch()
Fix a silly bug where an array was used outside of its scope. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fsl-edma: free irq correctly in remove path
Add fsl_edma->txirq/errirq check to avoid below warning because no
errirq at i.MX9 platform. Otherwise there will be kernel dump:
WARNING: CPU: 0 PID: 11 at kernel/irq/devres.c:144 devm_free_irq+0x74/0x80
Modules linked in:
CPU: 0 UID: 0 PID: 11 Comm: kworker/u8:0 Not tainted 6.12.0-rc7#18
Hardware name: NXP i.MX93 11X11 EVK board (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : devm_free_irq+0x74/0x80
lr : devm_free_irq+0x48/0x80
Call trace:
devm_free_irq+0x74/0x80 (P)
devm_free_irq+0x48/0x80 (L)
fsl_edma_remove+0xc4/0xc8
platform_remove+0x28/0x44
device_remove+0x4c/0x80 |
| A Remote Code Execution (RCE) vulnerability in /be/rpc.php in Jedox 2020.2.5 allows remote authenticated users to load arbitrary PHP classes from the 'rtn' directory and execute its methods. NOTE: The vendor states that the vulnerability affects installations running version 22.5 or earlier. The issue was resolved with version 23.2 and later versions are not affected. |
| Pimcore is an Open Source Data & Experience Management Platform. Any call with the query argument `?pimcore_preview=true` allows to view unpublished sites. In previous versions of Pimcore, session information would propagate to previews, so only a logged in user could open a preview. This no longer applies. Previews are broad open to any user and with just the hint of a restricted link one could gain access to possible confident / unreleased information. This vulnerability is fixed in 11.2.2 and 11.1.6.1.
|
| In the Linux kernel, the following vulnerability has been resolved:
misc: pci_endpoint_test: Avoid issue of interrupts remaining after request_irq error
After devm_request_irq() fails with error in pci_endpoint_test_request_irq(),
the pci_endpoint_test_free_irq_vectors() is called assuming that all IRQs
have been released.
However, some requested IRQs remain unreleased, so there are still
/proc/irq/* entries remaining, and this results in WARN() with the
following message:
remove_proc_entry: removing non-empty directory 'irq/30', leaking at least 'pci-endpoint-test.0'
WARNING: CPU: 0 PID: 202 at fs/proc/generic.c:719 remove_proc_entry +0x190/0x19c
To solve this issue, set the number of remaining IRQs to test->num_irqs,
and release IRQs in advance by calling pci_endpoint_test_release_irq().
[kwilczynski: commit log] |
| A vulnerability was detected in atjiu pybbs up to 6.0.0. This affects an unknown function of the file UserApiController.java. The manipulation results in information disclosure. The attack may be launched remotely. The exploit is now public and may be used. |
| The issue was addressed with improved checks. This issue is fixed in iOS 16.7.1 and iPadOS 16.7.1. A local attacker may be able to elevate their privileges. Apple is aware of a report that this issue may have been actively exploited against versions of iOS before iOS 16.6. |
| In the Linux kernel, the following vulnerability has been resolved:
virtiofs: add filesystem context source name check
In certain scenarios, for example, during fuzz testing, the source
name may be NULL, which could lead to a kernel panic. Therefore, an
extra check for the source name should be added. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix hang while freeing sigtrap event
Perf can hang while freeing a sigtrap event if a related deferred
signal hadn't managed to be sent before the file got closed:
perf_event_overflow()
task_work_add(perf_pending_task)
fput()
task_work_add(____fput())
task_work_run()
____fput()
perf_release()
perf_event_release_kernel()
_free_event()
perf_pending_task_sync()
task_work_cancel() -> FAILED
rcuwait_wait_event()
Once task_work_run() is running, the list of pending callbacks is
removed from the task_struct and from this point on task_work_cancel()
can't remove any pending and not yet started work items, hence the
task_work_cancel() failure and the hang on rcuwait_wait_event().
Task work could be changed to remove one work at a time, so a work
running on the current task can always cancel a pending one, however
the wait / wake design is still subject to inverted dependencies when
remote targets are involved, as pictured by Oleg:
T1 T2
fd = perf_event_open(pid => T2->pid); fd = perf_event_open(pid => T1->pid);
close(fd) close(fd)
<IRQ> <IRQ>
perf_event_overflow() perf_event_overflow()
task_work_add(perf_pending_task) task_work_add(perf_pending_task)
</IRQ> </IRQ>
fput() fput()
task_work_add(____fput()) task_work_add(____fput())
task_work_run() task_work_run()
____fput() ____fput()
perf_release() perf_release()
perf_event_release_kernel() perf_event_release_kernel()
_free_event() _free_event()
perf_pending_task_sync() perf_pending_task_sync()
rcuwait_wait_event() rcuwait_wait_event()
Therefore the only option left is to acquire the event reference count
upon queueing the perf task work and release it from the task work, just
like it was done before 3a5465418f5f ("perf: Fix event leak upon exec and file release")
but without the leaks it fixed.
Some adjustments are necessary to make it work:
* A child event might dereference its parent upon freeing. Care must be
taken to release the parent last.
* Some places assuming the event doesn't have any reference held and
therefore can be freed right away must instead put the reference and
let the reference counting to its job. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vf: Don't try to trigger a full GT reset if VF
VFs don't have access to the GDRST(0x941c) register that driver
uses to reset a GT. Attempt to trigger a reset using debugfs:
$ cat /sys/kernel/debug/dri/0000:00:02.1/gt0/force_reset
or due to a hang condition detected by the driver leads to:
[ ] xe 0000:00:02.1: [drm] GT0: trying reset from force_reset [xe]
[ ] xe 0000:00:02.1: [drm] GT0: reset queued
[ ] xe 0000:00:02.1: [drm] GT0: reset started
[ ] ------------[ cut here ]------------
[ ] xe 0000:00:02.1: [drm] GT0: VF is trying to write 0x1 to an inaccessible register 0x941c+0x0
[ ] WARNING: CPU: 3 PID: 3069 at drivers/gpu/drm/xe/xe_gt_sriov_vf.c:996 xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] RIP: 0010:xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] Call Trace:
[ ] <TASK>
[ ] ? show_regs+0x6c/0x80
[ ] ? __warn+0x93/0x1c0
[ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] ? report_bug+0x182/0x1b0
[ ] ? handle_bug+0x6e/0xb0
[ ] ? exc_invalid_op+0x18/0x80
[ ] ? asm_exc_invalid_op+0x1b/0x20
[ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] ? xe_gt_tlb_invalidation_reset+0xef/0x110 [xe]
[ ] ? __mutex_unlock_slowpath+0x41/0x2e0
[ ] xe_mmio_write32+0x64/0x150 [xe]
[ ] do_gt_reset+0x2f/0xa0 [xe]
[ ] gt_reset_worker+0x14e/0x1e0 [xe]
[ ] process_one_work+0x21c/0x740
[ ] worker_thread+0x1db/0x3c0
Fix that by sending H2G VF_RESET(0x5507) action instead. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: fix io_req_post_cqe abuse by send bundle
[ 114.987980][ T5313] WARNING: CPU: 6 PID: 5313 at io_uring/io_uring.c:872 io_req_post_cqe+0x12e/0x4f0
[ 114.991597][ T5313] RIP: 0010:io_req_post_cqe+0x12e/0x4f0
[ 115.001880][ T5313] Call Trace:
[ 115.002222][ T5313] <TASK>
[ 115.007813][ T5313] io_send+0x4fe/0x10f0
[ 115.009317][ T5313] io_issue_sqe+0x1a6/0x1740
[ 115.012094][ T5313] io_wq_submit_work+0x38b/0xed0
[ 115.013223][ T5313] io_worker_handle_work+0x62a/0x1600
[ 115.013876][ T5313] io_wq_worker+0x34f/0xdf0
As the comment states, io_req_post_cqe() should only be used by
multishot requests, i.e. REQ_F_APOLL_MULTISHOT, which bundled sends are
not. Add a flag signifying whether a request wants to post multiple
CQEs. Eventually REQ_F_APOLL_MULTISHOT should imply the new flag, but
that's left out for simplicity. |
| In the Linux kernel, the following vulnerability has been resolved:
arm/crc-t10dif: fix use of out-of-scope array in crc_t10dif_arch()
Fix a silly bug where an array was used outside of its scope. |
| When a guest user accesses a chart in Apache Superset, the API response from the /chart/data endpoint includes a query field in its payload. This field contains the underlying query, which improperly discloses database schema information, such as table names, to the low-privileged guest user.
This issue affects Apache Superset: before 4.1.3.
Users are recommended to upgrade to version 4.1.3, which fixes the issue. |
| A vulnerability of plugin openid-connect in Apache APISIX.
This vulnerability will only have an impact if all of the following conditions are met:
1. Use the openid-connect plugin with introspection mode
2. The auth service connected to openid-connect provides services to multiple issuers
3. Multiple issuers share the same private key and relies only on the issuer being different
If affected by this vulnerability, it would allow an attacker with a valid account on one of the issuers to log into the other issuer.
This issue affects Apache APISIX: until 3.12.0.
Users are recommended to upgrade to version 3.12.0 or higher. |
| The issue was addressed with improved UI. This issue is fixed in iOS 18.6 and iPadOS 18.6, Safari 18. 6. Visiting a malicious website may lead to address bar spoofing. |
| Improper Input Validation vulnerability in Apache DolphinScheduler. An authenticated user can execute any shell script server by alert script.
This issue affects Apache DolphinScheduler: before 3.2.2.
Users are recommended to upgrade to version 3.3.1, which fixes the issue. |
| A vulnerability was identified in the kjd/idna library, specifically within the `idna.encode()` function, affecting version 3.6. The issue arises from the function's handling of crafted input strings, which can lead to quadratic complexity and consequently, a denial of service condition. This vulnerability is triggered by a crafted input that causes the `idna.encode()` function to process the input with considerable computational load, significantly increasing the processing time in a quadratic manner relative to the input size. |
| KSmserver in KDE Plasma Workspace (aka plasma-workspace) before 5.27.11.1 and 6.x before 6.0.5.1 allows connections via ICE based purely on the host, i.e., all local connections are accepted. This allows another user on the same machine to gain access to the session manager, e.g., use the session-restore feature to execute arbitrary code as the victim (on the next boot) via earlier use of the /tmp directory. |
| In the Linux kernel, the following vulnerability has been resolved:
sr9800: Add check for usbnet_get_endpoints
Add check for usbnet_get_endpoints() and return the error if it fails
in order to transfer the error. |
| The Spreadsheet::ParseXLSX package before 0.28 for Perl can encounter an out-of-memory condition during parsing of a crafted XLSX document. This occurs because the memoize implementation does not have appropriate constraints on merged cells. |
