| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| utility.c in telnetd in netkit telnet through 0.17 allows remote attackers to execute arbitrary code via short writes or urgent data, because of a buffer overflow involving the netclear and nextitem functions. |
| In FileX before 6.4.2, the file support module for Eclipse Foundation ThreadX, there was a possible buffer overflow in the FileX RAM disk driver. It could cause a remote execurtion after receiving a crafted sequence of packets |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: edma: Fix memory allocation size for queue_priority_map
Fix a critical memory allocation bug in edma_setup_from_hw() where
queue_priority_map was allocated with insufficient memory. The code
declared queue_priority_map as s8 (*)[2] (pointer to array of 2 s8),
but allocated memory using sizeof(s8) instead of the correct size.
This caused out-of-bounds memory writes when accessing:
queue_priority_map[i][0] = i;
queue_priority_map[i][1] = i;
The bug manifested as kernel crashes with "Oops - undefined instruction"
on ARM platforms (BeagleBoard-X15) during EDMA driver probe, as the
memory corruption triggered kernel hardening features on Clang.
Change the allocation to use sizeof(*queue_priority_map) which
automatically gets the correct size for the 2D array structure. |
| D-Link DSL-3788 revA1 1.01R1B036_EU_EN is vulnerable to Buffer Overflow via the COMM_MAKECustomMsg function of the webproc cgi |
| A vulnerability was determined in TOZED ZLT M30s up to 1.47. The affected element is an unknown function of the component UART Interface. Executing manipulation can lead to on-chip debug and test interface with improper access control. The physical device can be targeted for the attack. Attacks of this nature are highly complex. The exploitability is described as difficult. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Eclipse OMR compiler component, since release 0.7.0, an optimization enabled for Eclipse OpenJ9 consumers of OMR on Z processors incorrectly handles NUL (0x00) characters during the Latin-compatible charset (UTF-8, ISO8859-1, ASCII, etc) to IBM-1047/037 translation sequence. This can cause the output byte array to be truncated, discarding the first NUL byte and all subsequent characters, and thereby exposing a possible buffer over-read problem. This issue is fixed in Eclipse OMR version 0.8.0. |
| Flag Forge is a Capture The Flag (CTF) platform. Versions 2.3.2 and below have a Regular Expression Denial of Service (ReDoS) vulnerability in the user profile API endpoint (/api/user/[username]). The application constructs a regular expression dynamically using unescaped user input (the username parameter). An attacker can exploit this by sending a specially crafted username containing regex meta-characters (e.g., deeply nested groups or quantifiers), causing the MongoDB regex engine to consume excessive CPU resources. This can lead to Denial of Service for other users. The issue is fixed in version 2.3.3. To workaround this issue, implement a Web Application Firewall (WAF) rule to block requests containing regex meta-characters in the URL path. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, a heap out-of-bounds read occurs in the smartcard SetAttrib path when cbAttrLen does not match the actual NDR buffer length. This vulnerability is fixed in 3.20.1. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, global-buffer-overflow was observed in FreeRDP's Base64 decoding path. The root cause appears to be implementation-defined char signedness: on Arm/AArch64 builds, plain char is treated as unsigned, so the guard c <= 0 can be optimized into a simple c != 0 check. As a result, non-ASCII bytes (e.g., 0x80-0xFF) may bypass the intended range restriction and be used as an index into a global lookup table, causing out-of-bounds access. This vulnerability is fixed in 3.20.1. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, the URBDRC client does not perform bounds checking on server‑supplied MSUSB_INTERFACE_DESCRIPTOR values and uses them as indices in libusb_udev_complete_msconfig_setup, causing an out‑of‑bounds read. This vulnerability is fixed in 3.20.1. |
| CUPS is a standards-based, open-source printing system, and `libcupsfilters` contains the code of the filters of the former `cups-filters` package as library functions to be used for the data format conversion tasks needed in Printer Applications. In CUPS-Filters versions up to and including 1.28.17 and libscupsfilters versions 2.0.0 through 2.1.1, CUPS-Filters's `imagetoraster` filter has an out of bounds read/write vulnerability in the processing of TIFF image files. While the pixel buffer is allocated with the number of pixels times a pre-calculated bytes-per-pixel value, the function which processes these pixels is called with a size of the number of pixels times 3. When suitable inputs are passed, the bytes-per-pixel value can be set to 1 and bytes outside of the buffer bounds get processed. In order to trigger the bug, an attacker must issue a print job with a crafted TIFF file, and pass appropriate print job options to control the bytes-per-pixel value of the output format. They must choose a printer configuration under which the `imagetoraster` filter or its C-function equivalent `cfFilterImageToRaster()` gets invoked. The vulnerability exists in both CUPS-Filters 1.x and the successor library libcupsfilters (CUPS-Filters 2.x). In CUPS-Filters 2.x, the vulnerable function is `_cfImageReadTIFF() in libcupsfilters`. When this function is invoked as part of `cfFilterImageToRaster()`, the caller passes a look-up-table during whose processing the out of bounds memory access happens. In CUPS-Filters 1.x, the equivalent functions are all found in the cups-filters repository, which is not split into subprojects yet, and the vulnerable code is in `_cupsImageReadTIFF()`, which is called through `cupsImageOpen()` from the `imagetoraster` tool. A patch is available in commit b69dfacec7f176281782e2f7ac44f04bf9633cfa. |
| Tenda AX-3 v16.03.12.10_CN was discovered to contain a stack overflow in the mac2 parameter of the fromAdvSetMacMtuWan function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| A flaw was found in GIMP. An integer overflow vulnerability exists in the GIMP "Despeckle" plug-in. The issue occurs due to unchecked multiplication of image dimensions, such as width, height, and bytes-per-pixel (img_bpp), which can result in allocating insufficient memory and subsequently performing out-of-bounds writes. This issue could lead to heap corruption, a potential denial of service (DoS), or arbitrary code execution in certain scenarios. |
| Tenda AX-1806 v1.0.0.1 was discovered to contain a stack overflow in the serviceName parameter of the sub_65A28 function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Tenda AX-1806 v1.0.0.1 was discovered to contain a stack overflow in the serverName parameter of the sub_65A28 function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Tenda AX-1806 v1.0.0.1 was discovered to contain a stack overflow in the cloneType parameter of the sub_65B5C function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| GIMP JP2 File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of JP2 files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28248. |
| Tenda AX-1806 v1.0.0.1 was discovered to contain a stack overflow in the wanSpeed parameter of the sub_65B5C function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Tenda AX-1806 v1.0.0.1 was discovered to contain a stack overflow in the mac parameter of the sub_65B5C function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/MCE/AMD: Use an u64 for bank_map
Thee maximum number of MCA banks is 64 (MAX_NR_BANKS), see
a0bc32b3cacf ("x86/mce: Increase maximum number of banks to 64").
However, the bank_map which contains a bitfield of which banks to
initialize is of type unsigned int and that overflows when those bit
numbers are >= 32, leading to UBSAN complaining correctly:
UBSAN: shift-out-of-bounds in arch/x86/kernel/cpu/mce/amd.c:1365:38
shift exponent 32 is too large for 32-bit type 'int'
Change the bank_map to a u64 and use the proper BIT_ULL() macro when
modifying bits in there.
[ bp: Rewrite commit message. ] |
