| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mips: cpc: Fix refcount leak in mips_cpc_default_phys_base
Add the missing of_node_put() to release the refcount incremented
by of_find_compatible_node(). |
| In the Linux kernel, the following vulnerability has been resolved:
tty: Fix a possible resource leak in icom_probe
When pci_read_config_dword failed, call pci_release_regions() and
pci_disable_device() to recycle the resource previously allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8712: fix a potential memory leak in r871xu_drv_init()
In r871xu_drv_init(), if r8712_init_drv_sw() fails, then the memory
allocated by r8712_alloc_io_queue() in r8712_usb_dvobj_init() is not
properly released as there is no action will be performed by
r8712_usb_dvobj_deinit().
To properly release it, we should call r8712_free_io_queue() in
r8712_usb_dvobj_deinit().
Besides, in r871xu_dev_remove(), r8712_usb_dvobj_deinit() will be called
by r871x_dev_unload() under condition `padapter->bup` and
r8712_free_io_queue() is called by r8712_free_drv_sw().
However, r8712_usb_dvobj_deinit() does not rely on `padapter->bup` and
calling r8712_free_io_queue() in r8712_free_drv_sw() is negative for
better understading the code.
So I move r8712_usb_dvobj_deinit() into r871xu_dev_remove(), and remove
r8712_free_io_queue() from r8712_free_drv_sw(). |
| In the Linux kernel, the following vulnerability has been resolved:
memstick/mspro_block: fix handling of read-only devices
Use set_disk_ro to propagate the read-only state to the block layer
instead of checking for it in ->open and leaking a reference in case
of a read-only device. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix tag leaks on error
In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(),
pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls
to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd()
fails.
Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort
method fails, the tag allocated for the abort request task must be
freed. Add the missing call to pm8001_tag_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix task leak in pm8001_send_abort_all()
In pm8001_send_abort_all(), make sure to free the allocated sas task
if pm8001_tag_alloc() or pm8001_mpi_build_cmd() fail. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix memory leak in pm8001_chip_fw_flash_update_req()
In pm8001_chip_fw_flash_update_build(), if
pm8001_chip_fw_flash_update_build() fails, the struct fw_control_ex
allocated must be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
mips: ralink: fix a refcount leak in ill_acc_of_setup()
of_node_put(np) needs to be called when pdev == NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.2: fix reference count leaks in _nfs42_proc_copy_notify()
[You don't often get email from xiongx18@fudan.edu.cn. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]
The reference counting issue happens in two error paths in the
function _nfs42_proc_copy_notify(). In both error paths, the function
simply returns the error code and forgets to balance the refcount of
object `ctx`, bumped by get_nfs_open_context() earlier, which may
cause refcount leaks.
Fix it by balancing refcount of the `ctx` object before the function
returns in both error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ieee802154: at86rf230: Stop leaking skb's
Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. In the Tx case we then leak
the skb structure.
Free the skb structure upon error before returning when appropriate.
As the 'is_tx = 0' cannot be moved in the complete handler because of a
possible race between the delay in switching to STATE_RX_AACK_ON and a
new interrupt, we introduce an intermediate 'was_tx' boolean just for
this purpose.
There is no Fixes tag applying here, many changes have been made on this
area and the issue kind of always existed. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Forcibly leave nested virt when SMM state is toggled
Forcibly leave nested virtualization operation if userspace toggles SMM
state via KVM_SET_VCPU_EVENTS or KVM_SYNC_X86_EVENTS. If userspace
forces the vCPU out of SMM while it's post-VMXON and then injects an SMI,
vmx_enter_smm() will overwrite vmx->nested.smm.vmxon and end up with both
vmxon=false and smm.vmxon=false, but all other nVMX state allocated.
Don't attempt to gracefully handle the transition as (a) most transitions
are nonsencial, e.g. forcing SMM while L2 is running, (b) there isn't
sufficient information to handle all transitions, e.g. SVM wants access
to the SMRAM save state, and (c) KVM_SET_VCPU_EVENTS must precede
KVM_SET_NESTED_STATE during state restore as the latter disallows putting
the vCPU into L2 if SMM is active, and disallows tagging the vCPU as
being post-VMXON in SMM if SMM is not active.
Abuse of KVM_SET_VCPU_EVENTS manifests as a WARN and memory leak in nVMX
due to failure to free vmcs01's shadow VMCS, but the bug goes far beyond
just a memory leak, e.g. toggling SMM on while L2 is active puts the vCPU
in an architecturally impossible state.
WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline]
WARNING: CPU: 0 PID: 3606 at free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656
Modules linked in:
CPU: 1 PID: 3606 Comm: syz-executor725 Not tainted 5.17.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:free_loaded_vmcs arch/x86/kvm/vmx/vmx.c:2665 [inline]
RIP: 0010:free_loaded_vmcs+0x158/0x1a0 arch/x86/kvm/vmx/vmx.c:2656
Code: <0f> 0b eb b3 e8 8f 4d 9f 00 e9 f7 fe ff ff 48 89 df e8 92 4d 9f 00
Call Trace:
<TASK>
kvm_arch_vcpu_destroy+0x72/0x2f0 arch/x86/kvm/x86.c:11123
kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline]
kvm_destroy_vcpus+0x11f/0x290 arch/x86/kvm/../../../virt/kvm/kvm_main.c:460
kvm_free_vcpus arch/x86/kvm/x86.c:11564 [inline]
kvm_arch_destroy_vm+0x2e8/0x470 arch/x86/kvm/x86.c:11676
kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1217 [inline]
kvm_put_kvm+0x4fa/0xb00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1250
kvm_vm_release+0x3f/0x50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1273
__fput+0x286/0x9f0 fs/file_table.c:311
task_work_run+0xdd/0x1a0 kernel/task_work.c:164
exit_task_work include/linux/task_work.h:32 [inline]
do_exit+0xb29/0x2a30 kernel/exit.c:806
do_group_exit+0xd2/0x2f0 kernel/exit.c:935
get_signal+0x4b0/0x28c0 kernel/signal.c:2862
arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:868
handle_signal_work kernel/entry/common.c:148 [inline]
exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:207
__syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300
do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: ifcvf: Do proper cleanup if IFCVF init fails
ifcvf_mgmt_dev leaks memory if it is not freed before
returning. Call is made to correct return statement
so memory does not leak. ifcvf_init_hw does not take
care of this so it is needed to do it here. |
| A denial-of-service vulnerability exists in github.com/sirupsen/logrus when using Entry.Writer() to log a single-line payload larger than 64KB without newline characters. Due to limitations in the internal bufio.Scanner, the read fails with "token too long" and the writer pipe is closed, leaving Writer() unusable and causing application unavailability (DoS). This affects versions < 1.8.3, 1.9.0, and 1.9.2. The issue is fixed in 1.8.3, 1.9.1, and 1.9.3+, where the input is chunked and the writer continues to function even if an error is logged. |
| In the Linux kernel, the following vulnerability has been resolved:
raid10: cleanup memleak at raid10_make_request
If raid10_read_request or raid10_write_request registers a new
request and the REQ_NOWAIT flag is set, the code does not
free the malloc from the mempool.
unreferenced object 0xffff8884802c3200 (size 192):
comm "fio", pid 9197, jiffies 4298078271
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 88 41 02 00 00 00 00 00 .........A......
08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc c1a049a2):
__kmalloc+0x2bb/0x450
mempool_alloc+0x11b/0x320
raid10_make_request+0x19e/0x650 [raid10]
md_handle_request+0x3b3/0x9e0
__submit_bio+0x394/0x560
__submit_bio_noacct+0x145/0x530
submit_bio_noacct_nocheck+0x682/0x830
__blkdev_direct_IO_async+0x4dc/0x6b0
blkdev_read_iter+0x1e5/0x3b0
__io_read+0x230/0x1110
io_read+0x13/0x30
io_issue_sqe+0x134/0x1180
io_submit_sqes+0x48c/0xe90
__do_sys_io_uring_enter+0x574/0x8b0
do_syscall_64+0x5c/0xe0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
V4: changing backing tree to see if CKI tests will pass.
The patch code has not changed between any versions. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: Fix wraparounds of sk->sk_rmem_alloc.
Netlink has this pattern in some places
if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf)
atomic_add(skb->truesize, &sk->sk_rmem_alloc);
, which has the same problem fixed by commit 5a465a0da13e ("udp:
Fix multiple wraparounds of sk->sk_rmem_alloc.").
For example, if we set INT_MAX to SO_RCVBUFFORCE, the condition
is always false as the two operands are of int.
Then, a single socket can eat as many skb as possible until OOM
happens, and we can see multiple wraparounds of sk->sk_rmem_alloc.
Let's fix it by using atomic_add_return() and comparing the two
variables as unsigned int.
Before:
[root@fedora ~]# ss -f netlink
Recv-Q Send-Q Local Address:Port Peer Address:Port
-1668710080 0 rtnl:nl_wraparound/293 *
After:
[root@fedora ~]# ss -f netlink
Recv-Q Send-Q Local Address:Port Peer Address:Port
2147483072 0 rtnl:nl_wraparound/290 *
^
`--- INT_MAX - 576 |
| Tornado is a Python web framework and asynchronous networking library. Versions 6.5.2 and below use an inefficient algorithm when parsing parameters for HTTP header values, potentially causing a DoS. The _parseparam function in httputil.py is used to parse specific HTTP header values, such as those in multipart/form-data and repeatedly calls string.count() within a nested loop while processing quoted semicolons. If an attacker sends a request with a large number of maliciously crafted parameters in a Content-Disposition header, the server's CPU usage increases quadratically (O(n²)) during parsing. Due to Tornado's single event loop architecture, a single malicious request can cause the entire server to become unresponsive for an extended period. This issue is fixed in version 6.5.3. |
| Tornado is a Python web framework and asynchronous networking library. In versions 6.5.2 and below, a single maliciously crafted HTTP request can block the server's event loop for an extended period, caused by the HTTPHeaders.add method. The function accumulates values using string concatenation when the same header name is repeated, causing a Denial of Service (DoS). Due to Python string immutability, each concatenation copies the entire string, resulting in O(n²) time complexity. The severity can vary from high if max_header_size has been increased from its default, to low if it has its default value of 64KB. This issue is fixed in version 6.5.3. |
| Improper Resource Shutdown or Release vulnerability in ASR Falcon_Linux、Kestrel、Lapwing_Linux on Linux (traffic_stat modules) allows Resource Leak Exposure. This vulnerability is associated with program files traffic_stat/traffic_service/traffic_service.C.
This issue affects Falcon_Linux、Kestrel、Lapwing_Linux: before v1536. |
| Improper Resource Shutdown or Release vulnerability in ASR180x 、ASR190x in router
components
allows Resource Leak Exposure. This vulnerability is associated with program files router/phonebook/pb.c.
This issue affects Falcon_Linux、Kestrel、Lapwing_Linux: before v1536. |
| Resource leak vulnerability in ASR180x in router allows Resource Leak Exposure.
This vulnerability is associated with program files router/sms/sms.c.
This issue affects Falcon_Linux、Kestrel、Lapwing_Linux: before v1536. |
