| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The WP Google Map Plugin plugin for WordPress is vulnerable to blind SQL Injection via the 'id' parameter of the 'google_map' shortcode in all versions up to, and including, 1.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Contributor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| In the Linux kernel, the following vulnerability has been resolved:
can: mcba_usb: populate ndo_change_mtu() to prevent buffer overflow
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the mcba_usb driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, mcba_usb_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on these lines:
usb_msg.dlc = cf->len;
memcpy(usb_msg.data, cf->data, usb_msg.dlc);
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow. |
| The External Login plugin for WordPress is vulnerable to SQL Injection via the 'log' parameter in all versions up to, and including, 1.11.2 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database when a PostgreSQL or MSSQL database is configured as the external authentication database. |
| The TARIFFUXX plugin for WordPress is vulnerable to SQL Injection in versions up to, and including, 1.4. This is due to insufficient neutralization of user-supplied input used directly in SQL queries. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject additional SQL into queries and extract sensitive information from the database via a crafted id attribute in the 'tariffuxx_configurator' shortcode. |
| The WP ViewSTL plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'viewstl' shortcode in all versions up to, and including, 1.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The URLYar URL Shortner plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'urlyar_shortlink' shortcode in all versions up to, and including, 1.1.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A vulnerability exists in certain Dahua embedded products. Third-party malicious attacker with obtained normal user credentials could exploit the vulnerability to access certain data which are restricted to admin privileges, such as system-sensitive files through specific HTTP request. This may cause tampering with admin password, leading to privilege escalation. Systems with only admin account are not affected. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: Fix potential use after free in otx2_tc_add_flow()
This code calls kfree_rcu(new_node, rcu) and then dereferences "new_node"
and then dereferences it on the next line. Two lines later, we take
a mutex so I don't think this is an RCU safe region. Re-order it to do
the dereferences before queuing up the free. |
| The Zip Attachments plugin for WordPress is vulnerable to unauthorized loss of data due to a missing authorization and capability checks on the download.php file in all versions up to, and including, 1.6. This makes it possible for unauthenticated attackers to delete arbitrary files from the current wp_upload_dir directory. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: add validation for ring_len param
The `ring_len` parameter provided by the virtual function (VF)
is assigned directly to the hardware memory context (HMC) without
any validation.
To address this, introduce an upper boundary check for both Tx and Rx
queue lengths. The maximum number of descriptors supported by the
hardware is 8k-32.
Additionally, enforce alignment constraints: Tx rings must be a multiple
of 8, and Rx rings must be a multiple of 32. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: fix validation of VF state in get resources
VF state I40E_VF_STATE_ACTIVE is not the only state in which
VF is actually active so it should not be used to determine
if a VF is allowed to obtain resources.
Use I40E_VF_STATE_RESOURCES_LOADED that is set only in
i40e_vc_get_vf_resources_msg() and cleared during reset. |
| The External Login plugin for WordPress is vulnerable to sensitive information exposure in all versions up to, and including, 1.11.2 due to the 'exlog_test_connection' AJAX action lacking capability checks or nonce validation. This makes it possible for authenticated attackers, with subscriber-level access and above, to query the configured external database and retrieve truncated usernames, email addresses, and password hashes via the diagnostic test results view. |
| The Dynamically Display Posts plugin for WordPress is vulnerable to SQL Injection via the 'tax_query' parameter in all versions up to, and including, 1.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The Rich Snippet Site Report plugin for WordPress is vulnerable to SQL Injection via the 'last' parameter in all versions up to, and including, 2.0.0105 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This can also be exploited via CSRF. |
| The FunKItools plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.0.2. This is due to missing or incorrect nonce validation on the saveFields() function. This makes it possible for unauthenticated attackers to update plugin settings via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The Zip Attachments plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check as well as missing post status validation in the za_create_zip_callback function in all versions up to, and including, 1.6. This makes it possible for unauthenticated attackers to download attachments from private and password-protected posts. |
| The Outdoor plugin for WordPress is vulnerable to SQL Injection via the 'edit' action in all versions up to, and including, 1.3.2 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The OwnID Passwordless Login plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 1.3.4. This is due to the plugin not properly checking if the ownid_shared_secret value is empty prior to authenticating a user via JWT. This makes it possible for unauthenticated attackers to log in as other users, including administrators, on instances where the plugin has not been fully configured yet. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: fix idx validation in config queues msg
Ensure idx is within range of active/initialized TCs when iterating over
vf->ch[idx] in i40e_vc_config_queues_msg(). |
| The Quick Featured Images plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 13.7.2 via the qfi_set_thumbnail and qfi_delete_thumbnail AJAX actions due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with Author-level access and above, to change or remove featured images of other user's posts. |
