| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: fail closed if we can't get max channel used in indirection tables
Commit 0d1b7d6c9274 ("bnxt: fix crashes when reducing ring count with
active RSS contexts") proves that allowing indirection table to contain
channels with out of bounds IDs may lead to crashes. Currently the
max channel check in the core gets skipped if driver can't fetch
the indirection table or when we can't allocate memory.
Both of those conditions should be extremely rare but if they do
happen we should try to be safe and fail the channel change. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed
This avoids warning:
[ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
Caused by get_c0_compare_int on secondary CPU.
We also skipped saving IRQ number to struct clock_event_device *cd as
it's never used by clockevent core, as per comments it's only meant
for "non CPU local devices". |
| In the Linux kernel, the following vulnerability has been resolved:
ELF: fix kernel.randomize_va_space double read
ELF loader uses "randomize_va_space" twice. It is sysctl and can change
at any moment, so 2 loads could see 2 different values in theory with
unpredictable consequences.
Issue exactly one load for consistent value across one exec. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check
The lookup function iwl_mvm_rcu_fw_link_id_to_link_conf() is
normally called with input from the firmware, so it should use
IWL_FW_CHECK() instead of WARN_ON(). |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Avoid excessive partition lengths
Avoid mounting filesystems where the partition would overflow the
32-bits used for block number. Also refuse to mount filesystems where
the partition length is so large we cannot safely index bits in a
block bitmap. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: SHAMPO, Fix incorrect page release
Under the following conditions:
1) No skb created yet
2) header_size == 0 (no SHAMPO header)
3) header_index + 1 % MLX5E_SHAMPO_WQ_HEADER_PER_PAGE == 0 (this is the
last page fragment of a SHAMPO header page)
a new skb is formed with a page that is NOT a SHAMPO header page (it
is a regular data page). Further down in the same function
(mlx5e_handle_rx_cqe_mpwrq_shampo()), a SHAMPO header page from
header_index is released. This is wrong and it leads to SHAMPO header
pages being released more than once. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: core: Prevent USB core invalid event buffer address access
This commit addresses an issue where the USB core could access an
invalid event buffer address during runtime suspend, potentially causing
SMMU faults and other memory issues in Exynos platforms. The problem
arises from the following sequence.
1. In dwc3_gadget_suspend, there is a chance of a timeout when
moving the USB core to the halt state after clearing the
run/stop bit by software.
2. In dwc3_core_exit, the event buffer is cleared regardless of
the USB core's status, which may lead to an SMMU faults and
other memory issues. if the USB core tries to access the event
buffer address.
To prevent this hardware quirk on Exynos platforms, this commit ensures
that the event buffer address is not cleared by software when the USB
core is active during runtime suspend by checking its status before
clearing the buffer address. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: MT - limit max slots
syzbot is reporting too large allocation at input_mt_init_slots(), for
num_slots is supplied from userspace using ioctl(UI_DEV_CREATE).
Since nobody knows possible max slots, this patch chose 1024. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not BUG_ON() when freeing tree block after error
When freeing a tree block, at btrfs_free_tree_block(), if we fail to
create a delayed reference we don't deal with the error and just do a
BUG_ON(). The error most likely to happen is -ENOMEM, and we have a
comment mentioning that only -ENOMEM can happen, but that is not true,
because in case qgroups are enabled any error returned from
btrfs_qgroup_trace_extent_post() (can be -EUCLEAN or anything returned
from btrfs_search_slot() for example) can be propagated back to
btrfs_free_tree_block().
So stop doing a BUG_ON() and return the error to the callers and make
them abort the transaction to prevent leaking space. Syzbot was
triggering this, likely due to memory allocation failure injection. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: fix a possible DMA corruption
ARCH_DMA_MINALIGN was defined as 16 - this is too small - it may be
possible that two unrelated 16-byte allocations share a cache line. If
one of these allocations is written using DMA and the other is written
using cached write, the value that was written with DMA may be
corrupted.
This commit changes ARCH_DMA_MINALIGN to be 128 on PA20 and 32 on PA1.1 -
that's the largest possible cache line size.
As different parisc microarchitectures have different cache line size, we
define arch_slab_minalign(), cache_line_size() and
dma_get_cache_alignment() so that the kernel may tune slab cache
parameters dynamically, based on the detected cache line size. |
| In the Linux kernel, the following vulnerability has been resolved:
fou: remove warn in gue_gro_receive on unsupported protocol
Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is
not known or does not have a GRO handler.
Such a packet is easily constructed. Syzbot generates them and sets
off this warning.
Remove the warning as it is expected and not actionable.
The warning was previously reduced from WARN_ON to WARN_ON_ONCE in
commit 270136613bf7 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad
proto callbacks"). |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: prevent potential speculation leaks in gpio_device_get_desc()
Userspace may trigger a speculative read of an address outside the gpio
descriptor array.
Users can do that by calling gpio_ioctl() with an offset out of range.
Offset is copied from user and then used as an array index to get
the gpio descriptor without sanitization in gpio_device_get_desc().
This change ensures that the offset is sanitized by using
array_index_nospec() to mitigate any possibility of speculative
information leaks.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid BUG_ON() while continue reshape after reassembling
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
<TASK>
raid5_sync_request+0x43d/0x550
md_do_sync+0xb7a/0x2110
md_thread+0x294/0x2b0
kthread+0x147/0x1c0
ret_from_fork+0x59/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.
Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.
Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: disallow setting special AP channel widths
Setting the AP channel width is meant for use with the normal
20/40/... MHz channel width progression, and switching around
in S1G or narrow channels isn't supported. Disallow that. |
| In the Linux kernel, the following vulnerability has been resolved:
protect the fetch of ->fd[fd] in do_dup2() from mispredictions
both callers have verified that fd is not greater than ->max_fds;
however, misprediction might end up with
tofree = fdt->fd[fd];
being speculatively executed. That's wrong for the same reasons
why it's wrong in close_fd()/file_close_fd_locked(); the same
solution applies - array_index_nospec(fd, fdt->max_fds) could differ
from fd only in case of speculative execution on mispredicted path. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost_task: Handle SIGKILL by flushing work and exiting
Instead of lingering until the device is closed, this has us handle
SIGKILL by:
1. marking the worker as killed so we no longer try to use it with
new virtqueues and new flush operations.
2. setting the virtqueue to worker mapping so no new works are queued.
3. running all the exiting works. |
| In the Linux kernel, the following vulnerability has been resolved:
jffs2: Fix potential illegal address access in jffs2_free_inode
During the stress testing of the jffs2 file system,the following
abnormal printouts were found:
[ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948
[ 2430.649622] Mem abort info:
[ 2430.649829] ESR = 0x96000004
[ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2430.650564] SET = 0, FnV = 0
[ 2430.650795] EA = 0, S1PTW = 0
[ 2430.651032] FSC = 0x04: level 0 translation fault
[ 2430.651446] Data abort info:
[ 2430.651683] ISV = 0, ISS = 0x00000004
[ 2430.652001] CM = 0, WnR = 0
[ 2430.652558] [0069696969696948] address between user and kernel address ranges
[ 2430.653265] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 2430.654512] CPU: 2 PID: 20919 Comm: cat Not tainted 5.15.25-g512f31242bf6 #33
[ 2430.655008] Hardware name: linux,dummy-virt (DT)
[ 2430.655517] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2430.656142] pc : kfree+0x78/0x348
[ 2430.656630] lr : jffs2_free_inode+0x24/0x48
[ 2430.657051] sp : ffff800009eebd10
[ 2430.657355] x29: ffff800009eebd10 x28: 0000000000000001 x27: 0000000000000000
[ 2430.658327] x26: ffff000038f09d80 x25: 0080000000000000 x24: ffff800009d38000
[ 2430.658919] x23: 5a5a5a5a5a5a5a5a x22: ffff000038f09d80 x21: ffff8000084f0d14
[ 2430.659434] x20: ffff0000bf9a6ac0 x19: 0169696969696940 x18: 0000000000000000
[ 2430.659969] x17: ffff8000b6506000 x16: ffff800009eec000 x15: 0000000000004000
[ 2430.660637] x14: 0000000000000000 x13: 00000001000820a1 x12: 00000000000d1b19
[ 2430.661345] x11: 0004000800000000 x10: 0000000000000001 x9 : ffff8000084f0d14
[ 2430.662025] x8 : ffff0000bf9a6b40 x7 : ffff0000bf9a6b48 x6 : 0000000003470302
[ 2430.662695] x5 : ffff00002e41dcc0 x4 : ffff0000bf9aa3b0 x3 : 0000000003470342
[ 2430.663486] x2 : 0000000000000000 x1 : ffff8000084f0d14 x0 : fffffc0000000000
[ 2430.664217] Call trace:
[ 2430.664528] kfree+0x78/0x348
[ 2430.664855] jffs2_free_inode+0x24/0x48
[ 2430.665233] i_callback+0x24/0x50
[ 2430.665528] rcu_do_batch+0x1ac/0x448
[ 2430.665892] rcu_core+0x28c/0x3c8
[ 2430.666151] rcu_core_si+0x18/0x28
[ 2430.666473] __do_softirq+0x138/0x3cc
[ 2430.666781] irq_exit+0xf0/0x110
[ 2430.667065] handle_domain_irq+0x6c/0x98
[ 2430.667447] gic_handle_irq+0xac/0xe8
[ 2430.667739] call_on_irq_stack+0x28/0x54
The parameter passed to kfree was 5a5a5a5a, which corresponds to the target field of
the jffs_inode_info structure. It was found that all variables in the jffs_inode_info
structure were 5a5a5a5a, except for the first member sem. It is suspected that these
variables are not initialized because they were set to 5a5a5a5a during memory testing,
which is meant to detect uninitialized memory.The sem variable is initialized in the
function jffs2_i_init_once, while other members are initialized in
the function jffs2_init_inode_info.
The function jffs2_init_inode_info is called after iget_locked,
but in the iget_locked function, the destroy_inode process is triggered,
which releases the inode and consequently, the target member of the inode
is not initialized.In concurrent high pressure scenarios, iget_locked
may enter the destroy_inode branch as described in the code.
Since the destroy_inode functionality of jffs2 only releases the target,
the fix method is to set target to NULL in jffs2_i_init_once. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ecdh - explicitly zeroize private_key
private_key is overwritten with the key parameter passed in by the
caller (if present), or alternatively a newly generated private key.
However, it is possible that the caller provides a key (or the newly
generated key) which is shorter than the previous key. In that
scenario, some key material from the previous key would not be
overwritten. The easiest solution is to explicitly zeroize the entire
private_key array first.
Note that this patch slightly changes the behavior of this function:
previously, if the ecc_gen_privkey failed, the old private_key would
remain. Now, the private_key is always zeroized. This behavior is
consistent with the case where params.key is set and ecc_is_key_valid
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: emux: improve patch ioctl data validation
In load_data(), make the validation of and skipping over the main info
block match that in load_guspatch().
In load_guspatch(), add checking that the specified patch length matches
the actually supplied data, like load_data() already did. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panel: ilitek-ili9881c: Fix warning with GPIO controllers that sleep
The ilitek-ili9881c controls the reset GPIO using the non-sleeping
gpiod_set_value() function. This complains loudly when the GPIO
controller needs to sleep. As the caller can sleep, use
gpiod_set_value_cansleep() to fix the issue. |
