| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
DAMON's virtual address space operation set implementation (vaddr) calls
pte_offset_map_lock() inside the page table walk callback function. This
is for reading and writing page table accessed bits. If
pte_offset_map_lock() fails, it retries by returning the page table walk
callback function with ACTION_AGAIN.
pte_offset_map_lock() can continuously fail if the target is a pmd
migration entry, though. Hence it could cause an infinite page table walk
if the migration cannot be done until the page table walk is finished.
This indeed caused a soft lockup when CPU hotplugging and DAMON were
running in parallel.
Avoid the infinite loop by simply not retrying the page table walk. DAMON
is promising only a best-effort accuracy, so missing access to such pages
is no problem. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
Before disabling SR-IOV via config space accesses to the parent PF,
sriov_disable() first removes the PCI devices representing the VFs.
Since commit 9d16947b7583 ("PCI: Add global pci_lock_rescan_remove()")
such removal operations are serialized against concurrent remove and
rescan using the pci_rescan_remove_lock. No such locking was ever added
in sriov_disable() however. In particular when commit 18f9e9d150fc
("PCI/IOV: Factor out sriov_add_vfs()") factored out the PCI device
removal into sriov_del_vfs() there was still no locking around the
pci_iov_remove_virtfn() calls.
On s390 the lack of serialization in sriov_disable() may cause double
remove and list corruption with the below (amended) trace being observed:
PSW: 0704c00180000000 0000000c914e4b38 (klist_put+56)
GPRS: 000003800313fb48 0000000000000000 0000000100000001 0000000000000001
00000000f9b520a8 0000000000000000 0000000000002fbd 00000000f4cc9480
0000000000000001 0000000000000000 0000000000000000 0000000180692828
00000000818e8000 000003800313fe2c 000003800313fb20 000003800313fad8
#0 [3800313fb20] device_del at c9158ad5c
#1 [3800313fb88] pci_remove_bus_device at c915105ba
#2 [3800313fbd0] pci_iov_remove_virtfn at c9152f198
#3 [3800313fc28] zpci_iov_remove_virtfn at c90fb67c0
#4 [3800313fc60] zpci_bus_remove_device at c90fb6104
#5 [3800313fca0] __zpci_event_availability at c90fb3dca
#6 [3800313fd08] chsc_process_sei_nt0 at c918fe4a2
#7 [3800313fd60] crw_collect_info at c91905822
#8 [3800313fe10] kthread at c90feb390
#9 [3800313fe68] __ret_from_fork at c90f6aa64
#10 [3800313fe98] ret_from_fork at c9194f3f2.
This is because in addition to sriov_disable() removing the VFs, the
platform also generates hot-unplug events for the VFs. This being the
reverse operation to the hotplug events generated by sriov_enable() and
handled via pdev->no_vf_scan. And while the event processing takes
pci_rescan_remove_lock and checks whether the struct pci_dev still exists,
the lack of synchronization makes this checking racy.
Other races may also be possible of course though given that this lack of
locking persisted so long observable races seem very rare. Even on s390 the
list corruption was only observed with certain devices since the platform
events are only triggered by config accesses after the removal, so as long
as the removal finished synchronously they would not race. Either way the
locking is missing so fix this by adding it to the sriov_del_vfs() helper.
Just like PCI rescan-remove, locking is also missing in sriov_add_vfs()
including for the error case where pci_stop_and_remove_bus_device() is
called without the PCI rescan-remove lock being held. Even in the non-error
case, adding new PCI devices and buses should be serialized via the PCI
rescan-remove lock. Add the necessary locking. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (cgbc-hwmon) Add missing NULL check after devm_kzalloc()
The driver allocates memory for sensor data using devm_kzalloc(), but
did not check if the allocation succeeded. In case of memory allocation
failure, dereferencing the NULL pointer would lead to a kernel crash.
Add a NULL pointer check and return -ENOMEM to handle allocation failure
properly. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix kernel panic on partial unmap of a GPU VA region
This commit address a kernel panic issue that can happen if Userspace
tries to partially unmap a GPU virtual region (aka drm_gpuva).
The VM_BIND interface allows partial unmapping of a BO.
Panthor driver pre-allocates memory for the new drm_gpuva structures
that would be needed for the map/unmap operation, done using drm_gpuvm
layer. It expected that only one new drm_gpuva would be needed on umap
but a partial unmap can require 2 new drm_gpuva and that's why it
ended up doing a NULL pointer dereference causing a kernel panic.
Following dump was seen when partial unmap was exercised.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000078
Mem abort info:
ESR = 0x0000000096000046
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
Data abort info:
ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000
CM = 0, WnR = 1, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000088a863000
[000000000000078] pgd=080000088a842003, p4d=080000088a842003, pud=0800000884bf5003, pmd=0000000000000000
Internal error: Oops: 0000000096000046 [#1] PREEMPT SMP
<snip>
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : panthor_gpuva_sm_step_remap+0xe4/0x330 [panthor]
lr : panthor_gpuva_sm_step_remap+0x6c/0x330 [panthor]
sp : ffff800085d43970
x29: ffff800085d43970 x28: ffff00080363e440 x27: ffff0008090c6000
x26: 0000000000000030 x25: ffff800085d439f8 x24: ffff00080d402000
x23: ffff800085d43b60 x22: ffff800085d439e0 x21: ffff00080abdb180
x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000010
x17: 6e656c202c303030 x16: 3666666666646466 x15: 393d61766f69202c
x14: 312d3d7361203a70 x13: 303030323d6e656c x12: ffff80008324bf58
x11: 0000000000000003 x10: 0000000000000002 x9 : ffff8000801a6a9c
x8 : ffff00080360b300 x7 : 0000000000000000 x6 : 000000088aa35fc7
x5 : fff1000080000000 x4 : ffff8000842ddd30 x3 : 0000000000000001
x2 : 0000000100000000 x1 : 0000000000000001 x0 : 0000000000000078
Call trace:
panthor_gpuva_sm_step_remap+0xe4/0x330 [panthor]
op_remap_cb.isra.22+0x50/0x80
__drm_gpuvm_sm_unmap+0x10c/0x1c8
drm_gpuvm_sm_unmap+0x40/0x60
panthor_vm_exec_op+0xb4/0x3d0 [panthor]
panthor_vm_bind_exec_sync_op+0x154/0x278 [panthor]
panthor_ioctl_vm_bind+0x160/0x4a0 [panthor]
drm_ioctl_kernel+0xbc/0x138
drm_ioctl+0x240/0x500
__arm64_sys_ioctl+0xb0/0xf8
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.1+0x98/0xf8
do_el0_svc+0x24/0x38
el0_svc+0x40/0xf8
el0t_64_sync_handler+0xa0/0xc8
el0t_64_sync+0x174/0x178 |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Account for failed debug initialization
When the SCMI debug subsystem fails to initialize, the related debug root
will be missing, and the underlying descriptor will be NULL.
Handle this fault condition in the SCMI debug helpers that maintain
metrics counters. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: dealloc commit test ctx always
The damon_ctx for testing online DAMON parameters commit inputs is
deallocated only when the test fails. This means memory is leaked for
every successful online DAMON parameters commit. Fix the leak by always
deallocating it. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: catch commit test ctx alloc failure
Patch series "mm/damon/sysfs: fix commit test damon_ctx [de]allocation".
DAMON sysfs interface dynamically allocates and uses a damon_ctx object
for testing if given inputs for online DAMON parameters update is valid.
The object is being used without an allocation failure check, and leaked
when the test succeeds. Fix the two bugs.
This patch (of 2):
The damon_ctx for testing online DAMON parameters commit inputs is used
without its allocation failure check. This could result in an invalid
memory access. Fix it by directly returning an error when the allocation
failed. |
| LogStare Collector contains an incorrect authorization vulnerability in UserRegistration. If exploited, a non-administrative user may create a new user account by sending a crafted HTTP request. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: verify the expected usb_endpoints are present
The bug arises when a USB device claims to be an ATH9K but doesn't
have the expected endpoints. (In this case there was an interrupt
endpoint where the driver expected a bulk endpoint.) The kernel
needs to be able to handle such devices without getting an internal error.
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 3 PID: 500 at drivers/usb/core/urb.c:493 usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
Modules linked in:
CPU: 3 PID: 500 Comm: kworker/3:2 Not tainted 5.10.135-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: events request_firmware_work_func
RIP: 0010:usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
Call Trace:
ath9k_hif_usb_alloc_rx_urbs drivers/net/wireless/ath/ath9k/hif_usb.c:908 [inline]
ath9k_hif_usb_alloc_urbs+0x75e/0x1010 drivers/net/wireless/ath/ath9k/hif_usb.c:1019
ath9k_hif_usb_dev_init drivers/net/wireless/ath/ath9k/hif_usb.c:1109 [inline]
ath9k_hif_usb_firmware_cb+0x142/0x530 drivers/net/wireless/ath/ath9k/hif_usb.c:1242
request_firmware_work_func+0x12e/0x240 drivers/base/firmware_loader/main.c:1097
process_one_work+0x9af/0x1600 kernel/workqueue.c:2279
worker_thread+0x61d/0x12f0 kernel/workqueue.c:2425
kthread+0x3b4/0x4a0 kernel/kthread.c:313
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:299
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
slimbus: qcom-ngd: cleanup in probe error path
Add proper error path in probe() to cleanup resources previously
acquired/allocated to fix warnings visible during probe deferral:
notifier callback qcom_slim_ngd_ssr_notify already registered
WARNING: CPU: 6 PID: 70 at kernel/notifier.c:28 notifier_chain_register+0x5c/0x90
Modules linked in:
CPU: 6 PID: 70 Comm: kworker/u16:1 Not tainted 6.0.0-rc3-next-20220830 #380
Call trace:
notifier_chain_register+0x5c/0x90
srcu_notifier_chain_register+0x44/0x90
qcom_register_ssr_notifier+0x38/0x4c
qcom_slim_ngd_ctrl_probe+0xd8/0x400
platform_probe+0x6c/0xe0
really_probe+0xbc/0x2d4
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x12c
__device_attach_driver+0xb8/0x120
bus_for_each_drv+0x78/0xd0
__device_attach+0xa8/0x1c0
device_initial_probe+0x18/0x24
bus_probe_device+0xa0/0xac
deferred_probe_work_func+0x88/0xc0
process_one_work+0x1d4/0x320
worker_thread+0x2cc/0x44c
kthread+0x110/0x114
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
md: Replace snprintf with scnprintf
Current code produces a warning as shown below when total characters
in the constituent block device names plus the slashes exceeds 200.
snprintf() returns the number of characters generated from the given
input, which could cause the expression “200 – len” to wrap around
to a large positive number. Fix this by using scnprintf() instead,
which returns the actual number of characters written into the buffer.
[ 1513.267938] ------------[ cut here ]------------
[ 1513.267943] WARNING: CPU: 15 PID: 37247 at <snip>/lib/vsprintf.c:2509 vsnprintf+0x2c8/0x510
[ 1513.267944] Modules linked in: <snip>
[ 1513.267969] CPU: 15 PID: 37247 Comm: mdadm Not tainted 5.4.0-1085-azure #90~18.04.1-Ubuntu
[ 1513.267969] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022
[ 1513.267971] RIP: 0010:vsnprintf+0x2c8/0x510
<-snip->
[ 1513.267982] Call Trace:
[ 1513.267986] snprintf+0x45/0x70
[ 1513.267990] ? disk_name+0x71/0xa0
[ 1513.267993] dump_zones+0x114/0x240 [raid0]
[ 1513.267996] ? _cond_resched+0x19/0x40
[ 1513.267998] raid0_run+0x19e/0x270 [raid0]
[ 1513.268000] md_run+0x5e0/0xc50
[ 1513.268003] ? security_capable+0x3f/0x60
[ 1513.268005] do_md_run+0x19/0x110
[ 1513.268006] md_ioctl+0x195e/0x1f90
[ 1513.268007] blkdev_ioctl+0x91f/0x9f0
[ 1513.268010] block_ioctl+0x3d/0x50
[ 1513.268012] do_vfs_ioctl+0xa9/0x640
[ 1513.268014] ? __fput+0x162/0x260
[ 1513.268016] ksys_ioctl+0x75/0x80
[ 1513.268017] __x64_sys_ioctl+0x1a/0x20
[ 1513.268019] do_syscall_64+0x5e/0x200
[ 1513.268021] entry_SYSCALL_64_after_hwframe+0x44/0xa9 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix extent map use-after-free when handling missing device in read_one_chunk
Store the error code before freeing the extent_map. Though it's
reference counted structure, in that function it's the first and last
allocation so this would lead to a potential use-after-free.
The error can happen eg. when chunk is stored on a missing device and
the degraded mount option is missing.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216721 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/omap: Fix buffer overflow in debugfs
There are two issues here:
1) The "len" variable needs to be checked before the very first write.
Otherwise if omap2_iommu_dump_ctx() with "bytes" less than 32 it is a
buffer overflow.
2) The snprintf() function returns the number of bytes that *would* have
been copied if there were enough space. But we want to know the
number of bytes which were *actually* copied so use scnprintf()
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: set other missing fields when unlocking files
vfs_lock_file() expects the struct file_lock to be fully initialised by
the caller. Re-exported NFSv3 has been seen to Oops if the fl_file field
is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: core: fix possible resource leak in init_mtd()
I got the error report while inject fault in init_mtd():
sysfs: cannot create duplicate filename '/devices/virtual/bdi/mtd-0'
Call Trace:
<TASK>
dump_stack_lvl+0x67/0x83
sysfs_warn_dup+0x60/0x70
sysfs_create_dir_ns+0x109/0x120
kobject_add_internal+0xce/0x2f0
kobject_add+0x98/0x110
device_add+0x179/0xc00
device_create_groups_vargs+0xf4/0x100
device_create+0x7b/0xb0
bdi_register_va.part.13+0x58/0x2d0
bdi_register+0x9b/0xb0
init_mtd+0x62/0x171 [mtd]
do_one_initcall+0x6c/0x3c0
do_init_module+0x58/0x222
load_module+0x268e/0x27d0
__do_sys_finit_module+0xd5/0x140
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
kobject_add_internal failed for mtd-0 with -EEXIST, don't try to register
things with the same name in the same directory.
Error registering mtd class or bdi: -17
If init_mtdchar() fails in init_mtd(), mtd_bdi will not be unregistered,
as a result, we can't load the mtd module again, to fix this by calling
bdi_unregister(mtd_bdi) after out_procfs label. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sof_es8336: fix possible use-after-free in sof_es8336_remove()
sof_es8336_remove() calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This
means that the callback function may still be running after
the driver's remove function has finished, which would result
in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: fix out-of-bounds access on cio_ignore free
The channel-subsystem-driver scans for newly available devices whenever
device-IDs are removed from the cio_ignore list using a command such as:
echo free >/proc/cio_ignore
Since an I/O device scan might interfer with running I/Os, commit
172da89ed0ea ("s390/cio: avoid excessive path-verification requests")
introduced an optimization to exclude online devices from the scan.
The newly added check for online devices incorrectly assumes that
an I/O-subchannel's drvdata points to a struct io_subchannel_private.
For devices that are bound to a non-default I/O subchannel driver, such
as the vfio_ccw driver, this results in an out-of-bounds read access
during each scan.
Fix this by changing the scan logic to rely on a driver-independent
online indication. For this we can use struct subchannel->config.ena,
which is the driver's requested subchannel-enabled state. Since I/Os
can only be started on enabled subchannels, this matches the intent
of the original optimization of not scanning devices where I/O might
be running. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: Add checks for devm_kcalloc
As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failed
If the initialization fails in calling addrconf_init_net(), devconf_all is
the pointer that has been released. Then ip6mr_sk_done() is called to
release the net, accessing devconf->mc_forwarding directly causes invalid
pointer access.
The process is as follows:
setup_net()
ops_init()
addrconf_init_net()
all = kmemdup(...) ---> alloc "all"
...
net->ipv6.devconf_all = all;
__addrconf_sysctl_register() ---> failed
...
kfree(all); ---> ipv6.devconf_all invalid
...
ops_exit_list()
...
ip6mr_sk_done()
devconf = net->ipv6.devconf_all;
//devconf is invalid pointer
if (!devconf || !atomic_read(&devconf->mc_forwarding))
The following is the Call Trace information:
BUG: KASAN: use-after-free in ip6mr_sk_done+0x112/0x3a0
Read of size 4 at addr ffff888075508e88 by task ip/14554
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
print_report+0x155/0x454
kasan_report+0xba/0x1f0
kasan_check_range+0x35/0x1b0
ip6mr_sk_done+0x112/0x3a0
rawv6_close+0x48/0x70
inet_release+0x109/0x230
inet6_release+0x4c/0x70
sock_release+0x87/0x1b0
igmp6_net_exit+0x6b/0x170
ops_exit_list+0xb0/0x170
setup_net+0x7ac/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f7963322547
</TASK>
Allocated by task 14554:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0xa1/0xb0
__kmalloc_node_track_caller+0x4a/0xb0
kmemdup+0x28/0x60
addrconf_init_net+0x1be/0x840
ops_init+0xa5/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 14554:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x155/0x1b0
slab_free_freelist_hook+0x11b/0x220
__kmem_cache_free+0xa4/0x360
addrconf_init_net+0x623/0x840
ops_init+0xa5/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0 |
