| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the boot process of Blurams Flare Camera version 24.1114.151.929 and earlier allows a physically proximate attacker to hijack the boot mechanism and gain a bootloader shell via the UART interface. This is achieved by inducing a read error from the SPI flash memory during the boot, by shorting a data pin of the IC to ground. An attacker can then dump the entire firmware, leading to the disclosure of sensitive information including cryptographic keys and user configurations. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, global-buffer-overflow was observed in FreeRDP's Base64 decoding path. The root cause appears to be implementation-defined char signedness: on Arm/AArch64 builds, plain char is treated as unsigned, so the guard c <= 0 can be optimized into a simple c != 0 check. As a result, non-ASCII bytes (e.g., 0x80-0xFF) may bypass the intended range restriction and be used as an index into a global lookup table, causing out-of-bounds access. This vulnerability is fixed in 3.20.1. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, the URBDRC client does not perform bounds checking on server‑supplied MSUSB_INTERFACE_DESCRIPTOR values and uses them as indices in libusb_udev_complete_msconfig_setup, causing an out‑of‑bounds read. This vulnerability is fixed in 3.20.1. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, a heap out-of-bounds read occurs in the smartcard SetAttrib path when cbAttrLen does not match the actual NDR buffer length. This vulnerability is fixed in 3.20.1. |
| GPAC v2.4.0 was discovered to contain an out-of-bounds read in the oggdmx_parse_tags function. |
| An out-of-bounds read in the GSF demuxer filter component of GPAC v2.4.0 allows attackers to cause a Denial of Service (DoS) via a crafted .gsf file. |
| A vulnerability regarding out-of-bounds read is found in the video interface. This allows remote attackers to execute arbitrary code via unspecified vectors. The following models with Synology Camera Firmware versions before 1.2.0-0525 may be affected: BC500, CC400W and TC500. |
| Out-of-bounds read vulnerabilities in print processing of Generic Plus PCL6 Printer Driver / Generic Plus UFR II Printer Driver / Generic Plus LIPS4 Printer Driver / Generic Plus LIPSLX Printer Driver / Generic Plus PS Printer Driver / UFRII LT Printer Driver / CARPS2 Printer Driver / Generic FAX Driver |
| CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.3, the Crypto_AOS_ProcessSecurity function reads memory without valid bounds checking when parsing AOS frame hashes. This issue has been patched in version 1.4.3. |
| CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.3, in base64urlDecode, padding-stripping dereferences input[inputLen - 1] before checking that inputLen > 0 or that input != NULL. For inputLen == 0, this becomes an OOB read at input[-1], potentially crashing the process. If input == NULL and inputLen == 0, it dereferences NULL - 1. This issue has been patched in version 1.4.3. |
| A message out-of-bounds read vulnerability in Trend Micro Apex Central could allow a remote attacker to create a denial-of-service condition on affected installations.
Please note: authentication is not required in order to exploit this vulnerability. |
| PDFsam Enhanced App Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of PDFsam Enhanced. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the handling of App objects. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27260. |
| Certain HP DesignJet print products are potentially vulnerable to information disclosure related to accessing memory out-of-bounds when using the general-purpose gateway (GGW) over port 9220. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
Some Viridian hypercalls can specify a mask of vCPU IDs as an input, in
one of three formats. Xen has boundary checking bugs with all three
formats, which can cause out-of-bounds reads and writes while processing
the inputs.
* CVE-2025-58147. Hypercalls using the HV_VP_SET Sparse format can
cause vpmask_set() to write out of bounds when converting the bitmap
to Xen's format.
* CVE-2025-58148. Hypercalls using any input format can cause
send_ipi() to read d->vcpu[] out-of-bounds, and operate on a wild
vCPU pointer. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
Some Viridian hypercalls can specify a mask of vCPU IDs as an input, in
one of three formats. Xen has boundary checking bugs with all three
formats, which can cause out-of-bounds reads and writes while processing
the inputs.
* CVE-2025-58147. Hypercalls using the HV_VP_SET Sparse format can
cause vpmask_set() to write out of bounds when converting the bitmap
to Xen's format.
* CVE-2025-58148. Hypercalls using any input format can cause
send_ipi() to read d->vcpu[] out-of-bounds, and operate on a wild
vCPU pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: remove read access to debugfs files
The 'command' and 'netdev_ops' debugfs files are a legacy debugging
interface supported by the i40e driver since its early days by commit
02e9c290814c ("i40e: debugfs interface").
Both of these debugfs files provide a read handler which is mostly useless,
and which is implemented with questionable logic. They both use a static
256 byte buffer which is initialized to the empty string. In the case of
the 'command' file this buffer is literally never used and simply wastes
space. In the case of the 'netdev_ops' file, the last command written is
saved here.
On read, the files contents are presented as the name of the device
followed by a colon and then the contents of their respective static
buffer. For 'command' this will always be "<device>: ". For 'netdev_ops',
this will be "<device>: <last command written>". But note the buffer is
shared between all devices operated by this module. At best, it is mostly
meaningless information, and at worse it could be accessed simultaneously
as there doesn't appear to be any locking mechanism.
We have also recently received multiple reports for both read functions
about their use of snprintf and potential overflow that could result in
reading arbitrary kernel memory. For the 'command' file, this is definitely
impossible, since the static buffer is always zero and never written to.
For the 'netdev_ops' file, it does appear to be possible, if the user
carefully crafts the command input, it will be copied into the buffer,
which could be large enough to cause snprintf to truncate, which then
causes the copy_to_user to read beyond the length of the buffer allocated
by kzalloc.
A minimal fix would be to replace snprintf() with scnprintf() which would
cap the return to the number of bytes written, preventing an overflow. A
more involved fix would be to drop the mostly useless static buffers,
saving 512 bytes and modifying the read functions to stop needing those as
input.
Instead, lets just completely drop the read access to these files. These
are debug interfaces exposed as part of debugfs, and I don't believe that
dropping read access will break any script, as the provided output is
pretty useless. You can find the netdev name through other more standard
interfaces, and the 'netdev_ops' interface can easily result in garbage if
you issue simultaneous writes to multiple devices at once.
In order to properly remove the i40e_dbg_netdev_ops_buf, we need to
refactor its write function to avoid using the static buffer. Instead, use
the same logic as the i40e_dbg_command_write, with an allocated buffer.
Update the code to use this instead of the static buffer, and ensure we
free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on
multiple devices, and allows us to remove the now unused static buffer
along with removing the read access. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix out-of-bounds read in audit_compare_dname_path()
When a watch on dir=/ is combined with an fsnotify event for a
single-character name directly under / (e.g., creating /a), an
out-of-bounds read can occur in audit_compare_dname_path().
The helper parent_len() returns 1 for "/". In audit_compare_dname_path(),
when parentlen equals the full path length (1), the code sets p = path + 1
and pathlen = 1 - 1 = 0. The subsequent loop then dereferences
p[pathlen - 1] (i.e., p[-1]), causing an out-of-bounds read.
Fix this by adding a pathlen > 0 check to the while loop condition
to prevent the out-of-bounds access.
[PM: subject tweak, sign-off email fixes] |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: Fix panic about slab-out-of-bounds caused by ntfs_listxattr()
Here is a BUG report from syzbot:
BUG: KASAN: slab-out-of-bounds in ntfs_list_ea fs/ntfs3/xattr.c:191 [inline]
BUG: KASAN: slab-out-of-bounds in ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710
Read of size 1 at addr ffff888021acaf3d by task syz-executor128/3632
Call Trace:
ntfs_list_ea fs/ntfs3/xattr.c:191 [inline]
ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710
vfs_listxattr fs/xattr.c:457 [inline]
listxattr+0x293/0x2d0 fs/xattr.c:804
Fix the logic of ea_all iteration. When the ea->name_len is 0,
return immediately, or Add2Ptr() would visit invalid memory
in the next loop.
[almaz.alexandrovich@paragon-software.com: lines of the patch have changed] |
| An issue was discovered in function d_abi_tags in file cp-demangle.c in BinUtils 2.26 allows attackers to cause a denial of service via crafted PE file. |
| An issue was discovered in function d_discriminator in file cp-demangle.c in BinUtils 2.26 allows attackers to cause a denial of service via crafted PE file. |
