| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
In iscsit_dec_session_usage_count(), the function calls complete() while
holding the sess->session_usage_lock. Similar to the connection usage count
logic, the waiter signaled by complete() (e.g., in the session release
path) may wake up and free the iscsit_session structure immediately.
This creates a race condition where the current thread may attempt to
execute spin_unlock_bh() on a session structure that has already been
deallocated, resulting in a KASAN slab-use-after-free.
To resolve this, release the session_usage_lock before calling complete()
to ensure all dereferences of the sess pointer are finished before the
waiter is allowed to proceed with deallocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix oops due to invalid pointer for kfree() in parse_longname()
This fixes a kernel oops when reading ceph snapshot directories (.snap),
for example by simply running `ls /mnt/my_ceph/.snap`.
The variable str is guarded by __free(kfree), but advanced by one for
skipping the initial '_' in snapshot names. Thus, kfree() is called
with an invalid pointer. This patch removes the need for advancing the
pointer so kfree() is called with correct memory pointer.
Steps to reproduce:
1. Create snapshots on a cephfs volume (I've 63 snaps in my testcase)
2. Add cephfs mount to fstab
$ echo "samba-fileserver@.files=/volumes/datapool/stuff/3461082b-ecc9-4e82-8549-3fd2590d3fb6 /mnt/test/stuff ceph acl,noatime,_netdev 0 0" >> /etc/fstab
3. Reboot the system
$ systemctl reboot
4. Check if it's really mounted
$ mount | grep stuff
5. List snapshots (expected 63 snapshots on my system)
$ ls /mnt/test/stuff/.snap
Now ls hangs forever and the kernel log shows the oops. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: prevent ZERO_SIZE_PTR dereference when num_ifs is zero
The driver allocates arrays for ports, FDBs, and filter blocks using
kcalloc() with ethsw->sw_attr.num_ifs as the element count. When the
device reports zero interfaces (either due to hardware configuration
or firmware issues), kcalloc(0, ...) returns ZERO_SIZE_PTR (0x10)
instead of NULL.
Later in dpaa2_switch_probe(), the NAPI initialization unconditionally
accesses ethsw->ports[0]->netdev, which attempts to dereference
ZERO_SIZE_PTR (address 0x10), resulting in a kernel panic.
Add a check to ensure num_ifs is greater than zero after retrieving
device attributes. This prevents the zero-sized allocations and
subsequent invalid pointer dereference. |
| Glory RBG-100 recycler systems using the ISPK-08 software component contain hard-coded operating system credentials that allow remote authentication to the underlying Linux system. Multiple local user accounts, including accounts with administrative privileges, were found to have fixed, embedded passwords. An attacker with network access to exposed services such as SSH may authenticate using these credentials and gain unauthorized access to the system. Successful exploitation allows remote access with elevated privileges and may result in full system compromise. |
| Smoothwall Express 3.1-SP4-polar-x86_64-update9 contains multiple reflected cross-site scripting vulnerabilities in the apcupsd.cgi script that allow attackers to inject malicious scripts through multiple POST parameters. Attackers can submit crafted POST requests with script payloads in parameters like BATTLEVEL, RTMIN, BATTDELAY, TO, ANNOY, UPSIP, UPSNAME, UPSPORT, POLLTIME, UPSUSER, NISPORT, UPSAUTH, EMAIL, FROM, CC, SMSEMAIL, SMTPSERVER, PORT, USER, and EMAIL_PASSWORD to execute arbitrary JavaScript in victim browsers. |
| Smoothwall Express 3.1-SP4-polar-x86_64-update9 contains multiple reflected cross-site scripting vulnerabilities in the interfaces.cgi script that allow attackers to inject malicious scripts through multiple parameters including GREEN_ADDRESS, GREEN_NETMASK, RED_DHCP_HOSTNAME, RED_ADDRESS, DNS1_OVERRIDE, DNS2_OVERRIDE, RED_MAC, RED_NETMASK, DEFAULT_GATEWAY, DNS1, and DNS2. Attackers can craft POST requests to interfaces.cgi with script payloads in these parameters to execute arbitrary JavaScript in the context of authenticated administrator sessions. |
| The WP Maps – Store Locator,Google Maps,OpenStreetMap,Mapbox,Listing,Directory & Filters plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 4.8.6 via the fc_load_template function. This makes it possible for authenticated attackers, with Subscriber-level access and above, to include and execute arbitrary .html files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .html file types can be uploaded and included. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: mmp_pdma: Fix race condition in mmp_pdma_residue()
Add proper locking in mmp_pdma_residue() to prevent use-after-free when
accessing descriptor list and descriptor contents.
The race occurs when multiple threads call tx_status() while the tasklet
on another CPU is freeing completed descriptors:
CPU 0 CPU 1
----- -----
mmp_pdma_tx_status()
mmp_pdma_residue()
-> NO LOCK held
list_for_each_entry(sw, ..)
DMA interrupt
dma_do_tasklet()
-> spin_lock(&desc_lock)
list_move(sw->node, ...)
spin_unlock(&desc_lock)
| dma_pool_free(sw) <- FREED!
-> access sw->desc <- UAF!
This issue can be reproduced when running dmatest on the same channel with
multiple threads (threads_per_chan > 1).
Fix by protecting the chain_running list iteration and descriptor access
with the chan->desc_lock spinlock. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in EKA Software Computer Information Advertising Services Ltd. Real Estate Script V5 (With Doping Module – Store Module – New Language System) allows Cross-Site Scripting (XSS).This issue affects Real Estate Script V5 (With Doping Module – Store Module – New Language System): through 17022026.
NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| The Spam protection, Anti-Spam, FireWall by CleanTalk plugin for WordPress is vulnerable to unauthorized Arbitrary Plugin Installation due to an authorization bypass via reverse DNS (PTR record) spoofing on the 'checkWithoutToken' function in all versions up to, and including, 6.71. This makes it possible for unauthenticated attackers to install and activate arbitrary plugins which can be leveraged to achieve remote code execution if another vulnerable plugin is installed and activated. Note: This is only exploitable on sites with an invalid API key. |
| The EventPrime plugin for WordPress is vulnerable to unauthorized image file upload in all versions up to, and including, 4.2.8.4. This is due to the plugin registering the upload_file_media AJAX action as publicly accessible (nopriv-enabled) without implementing any authentication, authorization, or nonce verification despite a nonce being created. This makes it possible for unauthenticated attackers to upload image files to the WordPress uploads directory and create Media Library attachments via the ep_upload_file_media endpoint. |
| The Forminator Forms – Contact Form, Payment Form & Custom Form Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the form_name parameter in all versions up to, and including, 1.50.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The plugin allows admins to give form management permissions to lower level users, which could make this exploitable by users such as subscribers. |
| SQL injection vulnerability (SQLi) in Clicldeu SaaS, specifically in the generation of reports, which occurs when a previously authenticated remote attacker executes a malicious payload in the URL generated after downloading the student's report card in the ‘Day-to-day’ section from the mobile application.
In the URL of the generated PDF, the session token used does not expire, so it remains valid for days after its generation, and unusual characters can be entered after the ‘id_alu’ parameter, resulting in two types of SQLi: boolean-based blind and time-based blind. Exploiting this vulnerability could allow an attacker to access confidential information in the database. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cpsw: Execute ndo_set_rx_mode callback in a work queue
Commit 1767bb2d47b7 ("ipv6: mcast: Don't hold RTNL for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this
change triggered the following call trace on my BeagleBone Black board:
WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/481
RTNL: assertion failed at net/8021q/vlan_core.c (236)
Modules linked in:
CPU: 0 UID: 997 PID: 481 Comm: rpcbind Not tainted 6.19.0-rc7-next-20260130-yocto-standard+ #35 PREEMPT
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x28/0x2c
show_stack from dump_stack_lvl+0x30/0x38
dump_stack_lvl from __warn+0xb8/0x11c
__warn from warn_slowpath_fmt+0x130/0x194
warn_slowpath_fmt from vlan_for_each+0x120/0x124
vlan_for_each from cpsw_add_mc_addr+0x54/0x98
cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec
__hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88
__dev_mc_add from igmp6_group_added+0x84/0xec
igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0
__ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4
__ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168
do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8
ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c
do_sock_setsockopt from __sys_setsockopt+0x84/0xac
__sys_setsockopt from ret_fast_syscall+0x0/0x54
This trace occurs because vlan_for_each() is called within
cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held.
Since modifying vlan_for_each() to operate without the RTNL lock is not
straightforward, and because ndo_set_rx_mode() is invoked both with and
without the RTNL lock across different code paths, simply adding
rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution.
To resolve this issue, we opt to execute the actual processing within
a work queue, following the approach used by the icssg-prueth driver.
Please note: To reproduce this issue, I manually reverted the changes to
am335x-bone-common.dtsi from commit c477358e66a3 ("ARM: dts: am335x-bone:
switch to new cpsw switch drv") in order to revert to the legacy cpsw
driver. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: sync read disk super and set block size
When the user performs a btrfs mount, the block device is not set
correctly. The user sets the block size of the block device to 0x4000
by executing the BLKBSZSET command.
Since the block size change also changes the mapping->flags value, this
further affects the result of the mapping_min_folio_order() calculation.
Let's analyze the following two scenarios:
Scenario 1: Without executing the BLKBSZSET command, the block size is
0x1000, and mapping_min_folio_order() returns 0;
Scenario 2: After executing the BLKBSZSET command, the block size is
0x4000, and mapping_min_folio_order() returns 2.
do_read_cache_folio() allocates a folio before the BLKBSZSET command
is executed. This results in the allocated folio having an order value
of 0. Later, after BLKBSZSET is executed, the block size increases to
0x4000, and the mapping_min_folio_order() calculation result becomes 2.
This leads to two undesirable consequences:
1. filemap_add_folio() triggers a VM_BUG_ON_FOLIO(folio_order(folio) <
mapping_min_folio_order(mapping)) assertion.
2. The syzbot report [1] shows a null pointer dereference in
create_empty_buffers() due to a buffer head allocation failure.
Synchronization should be established based on the inode between the
BLKBSZSET command and read cache page to prevent inconsistencies in
block size or mapping flags before and after folio allocation.
[1]
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:create_empty_buffers+0x4d/0x480 fs/buffer.c:1694
Call Trace:
folio_create_buffers+0x109/0x150 fs/buffer.c:1802
block_read_full_folio+0x14c/0x850 fs/buffer.c:2403
filemap_read_folio+0xc8/0x2a0 mm/filemap.c:2496
do_read_cache_folio+0x266/0x5c0 mm/filemap.c:4096
do_read_cache_page mm/filemap.c:4162 [inline]
read_cache_page_gfp+0x29/0x120 mm/filemap.c:4195
btrfs_read_disk_super+0x192/0x500 fs/btrfs/volumes.c:1367 |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/dmem: fix NULL pointer dereference when setting max
An issue was triggered:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 15 UID: 0 PID: 658 Comm: bash Tainted: 6.19.0-rc6-next-2026012
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
RIP: 0010:strcmp+0x10/0x30
RSP: 0018:ffffc900017f7dc0 EFLAGS: 00000246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff888107cd4358
RDX: 0000000019f73907 RSI: ffffffff82cc381a RDI: 0000000000000000
RBP: ffff8881016bef0d R08: 000000006c0e7145 R09: 0000000056c0e714
R10: 0000000000000001 R11: ffff888107cd4358 R12: 0007ffffffffffff
R13: ffff888101399200 R14: ffff888100fcb360 R15: 0007ffffffffffff
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000105c79000 CR4: 00000000000006f0
Call Trace:
<TASK>
dmemcg_limit_write.constprop.0+0x16d/0x390
? __pfx_set_resource_max+0x10/0x10
kernfs_fop_write_iter+0x14e/0x200
vfs_write+0x367/0x510
ksys_write+0x66/0xe0
do_syscall_64+0x6b/0x390
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f42697e1887
It was trriggered setting max without limitation, the command is like:
"echo test/region0 > dmem.max". To fix this issue, add check whether
options is valid after parsing the region_name. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix UAF in binder_netlink_report()
Oneway transactions sent to frozen targets via binder_proc_transaction()
return a BR_TRANSACTION_PENDING_FROZEN error but they are still treated
as successful since the target is expected to thaw at some point. It is
then not safe to access 't' after BR_TRANSACTION_PENDING_FROZEN errors
as the transaction could have been consumed by the now thawed target.
This is the case for binder_netlink_report() which derreferences 't'
after a pending frozen error, as pointed out by the following KASAN
report:
==================================================================
BUG: KASAN: slab-use-after-free in binder_netlink_report.isra.0+0x694/0x6c8
Read of size 8 at addr ffff00000f98ba38 by task binder-util/522
CPU: 4 UID: 0 PID: 522 Comm: binder-util Not tainted 6.19.0-rc6-00015-gc03e9c42ae8f #1 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
binder_netlink_report.isra.0+0x694/0x6c8
binder_transaction+0x66e4/0x79b8
binder_thread_write+0xab4/0x4440
binder_ioctl+0x1fd4/0x2940
[...]
Allocated by task 522:
__kmalloc_cache_noprof+0x17c/0x50c
binder_transaction+0x584/0x79b8
binder_thread_write+0xab4/0x4440
binder_ioctl+0x1fd4/0x2940
[...]
Freed by task 488:
kfree+0x1d0/0x420
binder_free_transaction+0x150/0x234
binder_thread_read+0x2d08/0x3ce4
binder_ioctl+0x488/0x2940
[...]
==================================================================
Instead, make a transaction copy so the data can be safely accessed by
binder_netlink_report() after a pending frozen error. While here, add a
comment about not using t->buffer in binder_netlink_report(). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (acpi_power_meter) Fix deadlocks related to acpi_power_meter_notify()
The acpi_power_meter driver's .notify() callback function,
acpi_power_meter_notify(), calls hwmon_device_unregister() under a lock
that is also acquired by callbacks in sysfs attributes of the device
being unregistered which is prone to deadlocks between sysfs access and
device removal.
Address this by moving the hwmon device removal in
acpi_power_meter_notify() outside the lock in question, but notice
that doing it alone is not sufficient because two concurrent
METER_NOTIFY_CONFIG notifications may be attempting to remove the
same device at the same time. To prevent that from happening, add a
new lock serializing the execution of the switch () statement in
acpi_power_meter_notify(). For simplicity, it is a static mutex
which should not be a problem from the performance perspective.
The new lock also allows the hwmon_device_register_with_info()
in acpi_power_meter_notify() to be called outside the inner lock
because it prevents the other notifications handled by that function
from manipulating the "resource" object while the hwmon device based
on it is being registered. The sending of ACPI netlink messages from
acpi_power_meter_notify() is serialized by the new lock too which
generally helps to ensure that the order of handling firmware
notifications is the same as the order of sending netlink messages
related to them.
In addition, notice that hwmon_device_register_with_info() may fail
in which case resource->hwmon_dev will become an error pointer,
so add checks to avoid attempting to unregister the hwmon device
pointer to by it in that case to acpi_power_meter_notify() and
acpi_power_meter_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: r8152: fix resume reset deadlock
rtl8152 can trigger device reset during reset which
potentially can result in a deadlock:
**** DPM device timeout after 10 seconds; 15 seconds until panic ****
Call Trace:
<TASK>
schedule+0x483/0x1370
schedule_preempt_disabled+0x15/0x30
__mutex_lock_common+0x1fd/0x470
__rtl8152_set_mac_address+0x80/0x1f0
dev_set_mac_address+0x7f/0x150
rtl8152_post_reset+0x72/0x150
usb_reset_device+0x1d0/0x220
rtl8152_resume+0x99/0xc0
usb_resume_interface+0x3e/0xc0
usb_resume_both+0x104/0x150
usb_resume+0x22/0x110
The problem is that rtl8152 resume calls reset under
tp->control mutex while reset basically re-enters rtl8152
and attempts to acquire the same tp->control lock once
again.
Reset INACCESSIBLE device outside of tp->control mutex
scope to avoid recursive mutex_lock() deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aloop: Fix racy access at PCM trigger
The PCM trigger callback of aloop driver tries to check the PCM state
and stop the stream of the tied substream in the corresponding cable.
Since both check and stop operations are performed outside the cable
lock, this may result in UAF when a program attempts to trigger
frequently while opening/closing the tied stream, as spotted by
fuzzers.
For addressing the UAF, this patch changes two things:
- It covers the most of code in loopback_check_format() with
cable->lock spinlock, and add the proper NULL checks. This avoids
already some racy accesses.
- In addition, now we try to check the state of the capture PCM stream
that may be stopped in this function, which was the major pain point
leading to UAF. |
