| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix double put of request
If a netfs request finishes during the pause loop, it will have the ref
that belongs to the IN_PROGRESS flag removed at that point - however, if it
then goes to the final wait loop, that will *also* put the ref because it
sees that the IN_PROGRESS flag is clear and incorrectly assumes that this
happened when it called the collector.
In fact, since IN_PROGRESS is clear, we shouldn't call the collector again
since it's done all the cleanup, such as calling ->ki_complete().
Fix this by making netfs_collect_in_app() just return, indicating that
we're done if IN_PROGRESS is removed. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: cpu_ops_sbi: Use static array for boot_data
Since commit 6b9f29b81b15 ("riscv: Enable pcpu page first chunk
allocator"), if NUMA is enabled, the page percpu allocator may be used
on very sparse configurations, or when requested on boot with
percpu_alloc=page.
In that case, percpu data gets put in the vmalloc area. However,
sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data,
and simply assumes that __pa() would work. This causes the just started
hart to immediately access an invalid address and hang.
Fortunately, struct sbi_hart_boot_data is not too large, so we can
simply allocate an array for boot_data statically, putting it in the
kernel image.
This fixes NUMA=y SMP boot on Sophgo SG2042.
To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then
run with:
qemu-system-riscv64 -M virt -smp 2 -nographic \
-kernel arch/riscv/boot/Image \
-append "percpu_alloc=page"
Kernel output:
[ 0.000000] Booting Linux on hartid 0
[ 0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025
...
[ 0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712
...
[ 0.083192] smp: Bringing up secondary CPUs ...
[ 0.086722] ------------[ cut here ]------------
[ 0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080)
[ 0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8
[ 0.088376] Modules linked in:
[ 0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE
[ 0.088833] Hardware name: riscv-virtio,qemu (DT)
[ 0.088948] epc : __virt_to_phys+0xae/0xe8
[ 0.089001] ra : __virt_to_phys+0xae/0xe8
[ 0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0
[ 0.089057] gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976
[ 0.089076] t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0
[ 0.089095] s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000
[ 0.089113] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
[ 0.089131] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000
[ 0.089155] s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001
[ 0.089174] s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec
[ 0.089193] s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000
[ 0.089211] s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7
[ 0.089960] t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8
[ 0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003
[ 0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8
[ 0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8
[ 0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c
[ 0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258
[ 0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c
[ 0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc
[ 0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244
[ 0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90
[ 0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118
[ 0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8
[ 0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4
[ 0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c
[ 0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0
[ 0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18
[ 0.090560] ---[ end trace 0000000000000000 ]---
[ 1.179875] CPU1: failed to come online
[ 1.190324] smp: Brought up 1 node, 1 CPU |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix memory leak of bio integrity
If nvmet receives commands with metadata there is a continuous memory
leak of kmalloc-128 slab or more precisely bio->bi_integrity.
Since commit bf4c89fc8797 ("block: don't call bio_uninit from bio_endio")
each user of bio_init has to use bio_uninit as well. Otherwise the bio
integrity is not getting free. Nvmet uses bio_init for inline bios.
Uninit the inline bio to complete deallocation of integrity in bio. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: return 0 size for RSS key if not supported
Returning -EOPNOTSUPP from function returning u32 is leading to
cast and invalid size value as a result.
-EOPNOTSUPP as a size probably will lead to allocation fail.
Command: ethtool -x eth0
It is visible on all devices that don't have RSS caps set.
[ 136.615917] Call Trace:
[ 136.615921] <TASK>
[ 136.615927] ? __warn+0x89/0x130
[ 136.615942] ? __alloc_frozen_pages_noprof+0x322/0x330
[ 136.615953] ? report_bug+0x164/0x190
[ 136.615968] ? handle_bug+0x58/0x90
[ 136.615979] ? exc_invalid_op+0x17/0x70
[ 136.615987] ? asm_exc_invalid_op+0x1a/0x20
[ 136.616001] ? rss_prepare_get.constprop.0+0xb9/0x170
[ 136.616016] ? __alloc_frozen_pages_noprof+0x322/0x330
[ 136.616028] __alloc_pages_noprof+0xe/0x20
[ 136.616038] ___kmalloc_large_node+0x80/0x110
[ 136.616072] __kmalloc_large_node_noprof+0x1d/0xa0
[ 136.616081] __kmalloc_noprof+0x32c/0x4c0
[ 136.616098] ? rss_prepare_get.constprop.0+0xb9/0x170
[ 136.616105] rss_prepare_get.constprop.0+0xb9/0x170
[ 136.616114] ethnl_default_doit+0x107/0x3d0
[ 136.616131] genl_family_rcv_msg_doit+0x100/0x160
[ 136.616147] genl_rcv_msg+0x1b8/0x2c0
[ 136.616156] ? __pfx_ethnl_default_doit+0x10/0x10
[ 136.616168] ? __pfx_genl_rcv_msg+0x10/0x10
[ 136.616176] netlink_rcv_skb+0x58/0x110
[ 136.616186] genl_rcv+0x28/0x40
[ 136.616195] netlink_unicast+0x19b/0x290
[ 136.616206] netlink_sendmsg+0x222/0x490
[ 136.616215] __sys_sendto+0x1fd/0x210
[ 136.616233] __x64_sys_sendto+0x24/0x30
[ 136.616242] do_syscall_64+0x82/0x160
[ 136.616252] ? __sys_recvmsg+0x83/0xe0
[ 136.616265] ? syscall_exit_to_user_mode+0x10/0x210
[ 136.616275] ? do_syscall_64+0x8e/0x160
[ 136.616282] ? __count_memcg_events+0xa1/0x130
[ 136.616295] ? count_memcg_events.constprop.0+0x1a/0x30
[ 136.616306] ? handle_mm_fault+0xae/0x2d0
[ 136.616319] ? do_user_addr_fault+0x379/0x670
[ 136.616328] ? clear_bhb_loop+0x45/0xa0
[ 136.616340] ? clear_bhb_loop+0x45/0xa0
[ 136.616349] ? clear_bhb_loop+0x45/0xa0
[ 136.616359] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 136.616369] RIP: 0033:0x7fd30ba7b047
[ 136.616376] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d bd d5 0c 00 00 41 89 ca 74 10 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 71 c3 55 48 83 ec 30 44 89 4c 24 2c 4c 89 44
[ 136.616381] RSP: 002b:00007ffde1796d68 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
[ 136.616388] RAX: ffffffffffffffda RBX: 000055d7bd89f2a0 RCX: 00007fd30ba7b047
[ 136.616392] RDX: 0000000000000028 RSI: 000055d7bd89f3b0 RDI: 0000000000000003
[ 136.616396] RBP: 00007ffde1796e10 R08: 00007fd30bb4e200 R09: 000000000000000c
[ 136.616399] R10: 0000000000000000 R11: 0000000000000202 R12: 000055d7bd89f340
[ 136.616403] R13: 000055d7bd89f3b0 R14: 000055d78943f200 R15: 0000000000000000 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-qpic-snand: reallocate BAM transactions
Using the mtd_nandbiterrs module for testing the driver occasionally
results in weird things like below.
1. swiotlb mapping fails with the following message:
[ 85.926216] qcom_snand 79b0000.spi: swiotlb buffer is full (sz: 4294967294 bytes), total 512 (slots), used 0 (slots)
[ 85.932937] qcom_snand 79b0000.spi: failure in mapping desc
[ 87.999314] qcom_snand 79b0000.spi: failure to write raw page
[ 87.999352] mtd_nandbiterrs: error: write_oob failed (-110)
Rebooting the board after this causes a panic due to a NULL pointer
dereference.
2. If the swiotlb mapping does not fail, rebooting the board may result
in a different panic due to a bad spinlock magic:
[ 256.104459] BUG: spinlock bad magic on CPU#3, procd/2241
[ 256.104488] Unable to handle kernel paging request at virtual address ffffffff0000049b
...
Investigating the issue revealed that these symptoms are results of
memory corruption which is caused by out of bounds access within the
driver.
The driver uses a dynamically allocated structure for BAM transactions,
which structure must have enough space for all possible variations of
different flash operations initiated by the driver. The required space
heavily depends on the actual number of 'codewords' which is calculated
from the pagesize of the actual NAND chip.
Although the qcom_nandc_alloc() function allocates memory for the BAM
transactions during probe, but since the actual number of 'codewords'
is not yet know the allocation is done for one 'codeword' only.
Because of this, whenever the driver does a flash operation, and the
number of the required transactions exceeds the size of the allocated
arrays the driver accesses memory out of the allocated range.
To avoid this, change the code to free the initially allocated BAM
transactions memory, and allocate a new one once the actual number of
'codewords' required for a given NAND chip is known. |
| In the Linux kernel, the following vulnerability has been resolved:
net: netpoll: Initialize UDP checksum field before checksumming
commit f1fce08e63fe ("netpoll: Eliminate redundant assignment") removed
the initialization of the UDP checksum, which was wrong and broke
netpoll IPv6 transmission due to bad checksumming.
udph->check needs to be set before calling csum_ipv6_magic(). |
| In the Linux kernel, the following vulnerability has been resolved:
block: reject bs > ps block devices when THP is disabled
If THP is disabled and when a block device with logical block size >
page size is present, the following null ptr deref panic happens during
boot:
[ [13.2 mK AOSAN: null-ptr-deref in range [0x0000000000000000-0x0000000000K0 0 0[07]
[ 13.017749] RIP: 0010:create_empty_buffers+0x3b/0x380
<snip>
[ 13.025448] Call Trace:
[ 13.025692] <TASK>
[ 13.025895] block_read_full_folio+0x610/0x780
[ 13.026379] ? __pfx_blkdev_get_block+0x10/0x10
[ 13.027008] ? __folio_batch_add_and_move+0x1fa/0x2b0
[ 13.027548] ? __pfx_blkdev_read_folio+0x10/0x10
[ 13.028080] filemap_read_folio+0x9b/0x200
[ 13.028526] ? __pfx_filemap_read_folio+0x10/0x10
[ 13.029030] ? __filemap_get_folio+0x43/0x620
[ 13.029497] do_read_cache_folio+0x155/0x3b0
[ 13.029962] ? __pfx_blkdev_read_folio+0x10/0x10
[ 13.030381] read_part_sector+0xb7/0x2a0
[ 13.030805] read_lba+0x174/0x2c0
<snip>
[ 13.045348] nvme_scan_ns+0x684/0x850 [nvme_core]
[ 13.045858] ? __pfx_nvme_scan_ns+0x10/0x10 [nvme_core]
[ 13.046414] ? _raw_spin_unlock+0x15/0x40
[ 13.046843] ? __switch_to+0x523/0x10a0
[ 13.047253] ? kvm_clock_get_cycles+0x14/0x30
[ 13.047742] ? __pfx_nvme_scan_ns_async+0x10/0x10 [nvme_core]
[ 13.048353] async_run_entry_fn+0x96/0x4f0
[ 13.048787] process_one_work+0x667/0x10a0
[ 13.049219] worker_thread+0x63c/0xf60
As large folio support depends on THP, only allow bs > ps block devices
if THP is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix race between DIM disable and net_dim()
There's a race between disabling DIM and NAPI callbacks using the dim
pointer on the RQ or SQ.
If NAPI checks the DIM state bit and sees it still set, it assumes
`rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after
that check, the pointer might already be set to NULL, leading to a NULL
pointer dereference in net_dim().
Fix this by calling `synchronize_net()` before freeing the DIM context.
This ensures all in-progress NAPI callbacks are finished before the
pointer is cleared.
Kernel log:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:net_dim+0x23/0x190
...
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? common_interrupt+0xf/0xa0
? sysvec_call_function_single+0xb/0x90
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? net_dim+0x23/0x190
? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core]
? sysvec_apic_timer_interrupt+0xb/0x90
mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core]
mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core]
? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core]
busy_poll_stop+0xa2/0x200
? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core]
? mlx5e_trigger_irq+0x130/0x130 [mlx5_core]
__napi_busy_loop+0x345/0x3b0
? sysvec_call_function_single+0xb/0x90
? asm_sysvec_call_function_single+0x16/0x20
? sysvec_apic_timer_interrupt+0xb/0x90
? pcpu_free_area+0x1e4/0x2e0
napi_busy_loop+0x11/0x20
xsk_recvmsg+0x10c/0x130
sock_recvmsg+0x44/0x70
__sys_recvfrom+0xbc/0x130
? __schedule+0x398/0x890
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
---[ end trace 0000000000000000 ]---
...
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda: Use devm_kstrdup() to avoid memleak.
sof_pdata->tplg_filename can have address allocated by kstrdup()
and can be overwritten. Memory leak was detected with kmemleak:
unreferenced object 0xffff88812391ff60 (size 16):
comm "kworker/4:1", pid 161, jiffies 4294802931
hex dump (first 16 bytes):
73 6f 66 2d 68 64 61 2d 67 65 6e 65 72 69 63 00 sof-hda-generic.
backtrace (crc 4bf1675c):
__kmalloc_node_track_caller_noprof+0x49c/0x6b0
kstrdup+0x46/0xc0
hda_machine_select.cold+0x1de/0x12cf [snd_sof_intel_hda_generic]
sof_init_environment+0x16f/0xb50 [snd_sof]
sof_probe_continue+0x45/0x7c0 [snd_sof]
sof_probe_work+0x1e/0x40 [snd_sof]
process_one_work+0x894/0x14b0
worker_thread+0x5e5/0xfb0
kthread+0x39d/0x760
ret_from_fork+0x31/0x70
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/scheduler: signal scheduled fence when kill job
When an entity from application B is killed, drm_sched_entity_kill()
removes all jobs belonging to that entity through
drm_sched_entity_kill_jobs_work(). If application A's job depends on a
scheduled fence from application B's job, and that fence is not properly
signaled during the killing process, application A's dependency cannot be
cleared.
This leads to application A hanging indefinitely while waiting for a
dependency that will never be resolved. Fix this issue by ensuring that
scheduled fences are properly signaled when an entity is killed, allowing
dependent applications to continue execution. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: vector: Fix context save/restore with xtheadvector
Previously only v0-v7 were correctly saved/restored,
and the context of v8-v31 are damanged.
Correctly save/restore v8-v31 to avoid breaking userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "riscv: Define TASK_SIZE_MAX for __access_ok()"
This reverts commit ad5643cf2f69 ("riscv: Define TASK_SIZE_MAX for
__access_ok()").
This commit changes TASK_SIZE_MAX to be LONG_MAX to optimize access_ok(),
because the previous TASK_SIZE_MAX (default to TASK_SIZE) requires some
computation.
The reasoning was that all user addresses are less than LONG_MAX, and all
kernel addresses are greater than LONG_MAX. Therefore access_ok() can
filter kernel addresses.
Addresses between TASK_SIZE and LONG_MAX are not valid user addresses, but
access_ok() let them pass. That was thought to be okay, because they are
not valid addresses at hardware level.
Unfortunately, one case is missed: get_user_pages_fast() happily accepts
addresses between TASK_SIZE and LONG_MAX. futex(), for instance, uses
get_user_pages_fast(). This causes the problem reported by Robert [1].
Therefore, revert this commit. TASK_SIZE_MAX is changed to the default:
TASK_SIZE.
This unfortunately reduces performance, because TASK_SIZE is more expensive
to compute compared to LONG_MAX. But correctness first, we can think about
optimization later, if required. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: fix runtime constant support for nommu kernels
the `__runtime_fixup_32` function does not handle the case where `val` is
zero correctly (as might occur when patching a nommu kernel and referring
to a physical address below the 4GiB boundary whose upper 32 bits are all
zero) because nothing in the existing logic prevents the code from taking
the `else` branch of both nop-checks and emitting two `nop` instructions.
This leaves random garbage in the register that is supposed to receive the
upper 32 bits of the pointer instead of zero that when combined with the
value for the lower 32 bits yields an invalid pointer and causes a kernel
panic when that pointer is eventually accessed.
The author clearly considered the fact that if the `lui` is converted into
a `nop` that the second instruction needs to be adjusted to become an `li`
instead of an `addi`, hence introducing the `addi_insn_mask` variable, but
didn't follow that logic through fully to the case where the `else` branch
executes. To fix it just adjust the logic to ensure that the second `else`
branch is not taken if the first instruction will be patched to a `nop`. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/xen: Fix cleanup logic in emulation of Xen schedop poll hypercalls
kvm_xen_schedop_poll does a kmalloc_array() when a VM polls the host
for more than one event channel potr (nr_ports > 1).
After the kmalloc_array(), the error paths need to go through the
"out" label, but the call to kvm_read_guest_virt() does not.
[Adjusted commit message. - Paolo] |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Correct signedness in skb remaining space calculation
Syzkaller reported a bug [1] where sk->sk_forward_alloc can overflow.
When we send data, if an skb exists at the tail of the write queue, the
kernel will attempt to append the new data to that skb. However, the code
that checks for available space in the skb is flawed:
'''
copy = size_goal - skb->len
'''
The types of the variables involved are:
'''
copy: ssize_t (s64 on 64-bit systems)
size_goal: int
skb->len: unsigned int
'''
Due to C's type promotion rules, the signed size_goal is converted to an
unsigned int to match skb->len before the subtraction. The result is an
unsigned int.
When this unsigned int result is then assigned to the s64 copy variable,
it is zero-extended, preserving its non-negative value. Consequently, copy
is always >= 0.
Assume we are sending 2GB of data and size_goal has been adjusted to a
value smaller than skb->len. The subtraction will result in copy holding a
very large positive integer. In the subsequent logic, this large value is
used to update sk->sk_forward_alloc, which can easily cause it to overflow.
The syzkaller reproducer uses TCP_REPAIR to reliably create this
condition. However, this can also occur in real-world scenarios. The
tcp_bound_to_half_wnd() function can also reduce size_goal to a small
value. This would cause the subsequent tcp_wmem_schedule() to set
sk->sk_forward_alloc to a value close to INT_MAX. Further memory
allocation requests would then cause sk_forward_alloc to wrap around and
become negative.
[1]: https://syzkaller.appspot.com/bug?extid=de6565462ab540f50e47 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ad1816a: Fix potential NULL pointer deref in snd_card_ad1816a_pnp()
Use pr_warn() instead of dev_warn() when 'pdev' is NULL to avoid a
potential NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/msg_ring: ensure io_kiocb freeing is deferred for RCU
syzbot reports that defer/local task_work adding via msg_ring can hit
a request that has been freed:
CPU: 1 UID: 0 PID: 19356 Comm: iou-wrk-19354 Not tainted 6.16.0-rc4-syzkaller-00108-g17bbde2e1716 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
io_req_local_work_add io_uring/io_uring.c:1184 [inline]
__io_req_task_work_add+0x589/0x950 io_uring/io_uring.c:1252
io_msg_remote_post io_uring/msg_ring.c:103 [inline]
io_msg_data_remote io_uring/msg_ring.c:133 [inline]
__io_msg_ring_data+0x820/0xaa0 io_uring/msg_ring.c:151
io_msg_ring_data io_uring/msg_ring.c:173 [inline]
io_msg_ring+0x134/0xa00 io_uring/msg_ring.c:314
__io_issue_sqe+0x17e/0x4b0 io_uring/io_uring.c:1739
io_issue_sqe+0x165/0xfd0 io_uring/io_uring.c:1762
io_wq_submit_work+0x6e9/0xb90 io_uring/io_uring.c:1874
io_worker_handle_work+0x7cd/0x1180 io_uring/io-wq.c:642
io_wq_worker+0x42f/0xeb0 io_uring/io-wq.c:696
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
which is supposed to be safe with how requests are allocated. But msg
ring requests alloc and free on their own, and hence must defer freeing
to a sane time.
Add an rcu_head and use kfree_rcu() in both spots where requests are
freed. Only the one in io_msg_tw_complete() is strictly required as it
has been visible on the other ring, but use it consistently in the other
spot as well.
This should not cause any other issues outside of KASAN rightfully
complaining about it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: rtsn: Fix a null pointer dereference in rtsn_probe()
Add check for the return value of rcar_gen4_ptp_alloc()
to prevent potential null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_sta_set_decap_offload()
Add a NULL check for msta->vif before accessing its members to prevent
a kernel panic in AP mode deployment. This also fix the issue reported
in [1].
The crash occurs when this function is triggered before the station is
fully initialized. The call trace shows a page fault at
mt7925_sta_set_decap_offload() due to accessing resources when msta->vif
is NULL.
Fix this by adding an early return if msta->vif is NULL and also check
wcid.sta is ready. This ensures we only proceed with decap offload
configuration when the station's state is properly initialized.
[14739.655703] Unable to handle kernel paging request at virtual address ffffffffffffffa0
[14739.811820] CPU: 0 UID: 0 PID: 895854 Comm: hostapd Tainted: G
[14739.821394] Tainted: [C]=CRAP, [O]=OOT_MODULE
[14739.825746] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
[14739.831577] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[14739.838538] pc : mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common]
[14739.845271] lr : mt7925_sta_set_decap_offload+0x58/0x1b8 [mt7925_common]
[14739.851985] sp : ffffffc085efb500
[14739.855295] x29: ffffffc085efb500 x28: 0000000000000000 x27: ffffff807803a158
[14739.862436] x26: ffffff8041ececb8 x25: 0000000000000001 x24: 0000000000000001
[14739.869577] x23: 0000000000000001 x22: 0000000000000008 x21: ffffff8041ecea88
[14739.876715] x20: ffffff8041c19ca0 x19: ffffff8078031fe0 x18: 0000000000000000
[14739.883853] x17: 0000000000000000 x16: ffffffe2aeac1110 x15: 000000559da48080
[14739.890991] x14: 0000000000000001 x13: 0000000000000000 x12: 0000000000000000
[14739.898130] x11: 0a10020001008e88 x10: 0000000000001a50 x9 : ffffffe26457bfa0
[14739.905269] x8 : ffffff8042013bb0 x7 : ffffff807fb6cbf8 x6 : dead000000000100
[14739.912407] x5 : dead000000000122 x4 : ffffff80780326c8 x3 : 0000000000000000
[14739.919546] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff8041ececb8
[14739.926686] Call trace:
[14739.929130] mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common]
[14739.935505] ieee80211_check_fast_rx+0x19c/0x510 [mac80211]
[14739.941344] _sta_info_move_state+0xe4/0x510 [mac80211]
[14739.946860] sta_info_move_state+0x1c/0x30 [mac80211]
[14739.952116] sta_apply_auth_flags.constprop.0+0x90/0x1b0 [mac80211]
[14739.958708] sta_apply_parameters+0x234/0x5e0 [mac80211]
[14739.964332] ieee80211_add_station+0xdc/0x190 [mac80211]
[14739.969950] nl80211_new_station+0x46c/0x670 [cfg80211]
[14739.975516] genl_family_rcv_msg_doit+0xdc/0x150
[14739.980158] genl_rcv_msg+0x218/0x298
[14739.983830] netlink_rcv_skb+0x64/0x138
[14739.987670] genl_rcv+0x40/0x60
[14739.990816] netlink_unicast+0x314/0x380
[14739.994742] netlink_sendmsg+0x198/0x3f0
[14739.998664] __sock_sendmsg+0x64/0xc0
[14740.002324] ____sys_sendmsg+0x260/0x298
[14740.006242] ___sys_sendmsg+0xb4/0x110 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: fix potential out-of-bounds page table access during batched unmap
As pointed out by David[1], the batched unmap logic in
try_to_unmap_one() may read past the end of a PTE table when a large
folio's PTE mappings are not fully contained within a single page
table.
While this scenario might be rare, an issue triggerable from userspace
must be fixed regardless of its likelihood. This patch fixes the
out-of-bounds access by refactoring the logic into a new helper,
folio_unmap_pte_batch().
The new helper correctly calculates the safe batch size by capping the
scan at both the VMA and PMD boundaries. To simplify the code, it also
supports partial batching (i.e., any number of pages from 1 up to the
calculated safe maximum), as there is no strong reason to special-case
for fully mapped folios. |
