| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
Actually check if the passed pointers are valid, before writing to them.
This also fixes a USBAN warning:
UBSAN: invalid-load in ../sound/soc/fsl/imx-card.c:687:25
load of value 255 is not a valid value for type '_Bool'
This is because playback_only is uninitialized and is not written to, as
the playback-only property is absent. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix locking order in ivpu_job_submit
Fix deadlock in job submission and abort handling.
When a thread aborts currently executing jobs due to a fault,
it first locks the global lock protecting submitted_jobs (#1).
After the last job is destroyed, it proceeds to release the related context
and locks file_priv (#2). Meanwhile, in the job submission thread,
the file_priv lock (#2) is taken first, and then the submitted_jobs
lock (#1) is obtained when a job is added to the submitted jobs list.
CPU0 CPU1
---- ----
(for example due to a fault) (jobs submissions keep coming)
lock(&vdev->submitted_jobs_lock) #1
ivpu_jobs_abort_all()
job_destroy()
lock(&file_priv->lock) #2
lock(&vdev->submitted_jobs_lock) #1
file_priv_release()
lock(&vdev->context_list_lock)
lock(&file_priv->lock) #2
This order of locking causes a deadlock. To resolve this issue,
change the order of locking in ivpu_job_submit(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: fix SER panic with 4GB+ RAM
If the mtk_poll_rx() function detects the MTK_RESETTING flag, it will
jump to release_desc and refill the high word of the SDP on the 4GB RFB.
Subsequently, mtk_rx_clean will process an incorrect SDP, leading to a
panic.
Add patch from MediaTek's SDK to resolve this. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, slab: clean up slab->obj_exts always
When memory allocation profiling is disabled at runtime or due to an
error, shutdown_mem_profiling() is called: slab->obj_exts which
previously allocated remains.
It won't be cleared by unaccount_slab() because of
mem_alloc_profiling_enabled() not true. It's incorrect, slab->obj_exts
should always be cleaned up in unaccount_slab() to avoid following error:
[...]BUG: Bad page state in process...
..
[...]page dumped because: page still charged to cgroup
[andriy.shevchenko@linux.intel.com: fold need_slab_obj_ext() into its only user] |
| In the Linux kernel, the following vulnerability has been resolved:
libbpf: Fix accessing BTF.ext core_relo header
Update btf_ext_parse_info() to ensure the core_relo header is present
before reading its fields. This avoids a potential buffer read overflow
reported by the OSS Fuzz project. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: Fix memleak issue when GSO enabled
Always map the `skb` to the LS descriptor. Previously skb was
mapped to EXT descriptor when the number of fragments is zero with
GSO enabled. Mapping the skb to EXT descriptor prevents it from
being freed, leading to a memory leak |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix out-of-bound memcpy() during ethtool -w
When retrieving the FW coredump using ethtool, it can sometimes cause
memory corruption:
BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en]
Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45):
__bnxt_get_coredump+0x3ef/0x670 [bnxt_en]
ethtool_get_dump_data+0xdc/0x1a0
__dev_ethtool+0xa1e/0x1af0
dev_ethtool+0xa8/0x170
dev_ioctl+0x1b5/0x580
sock_do_ioctl+0xab/0xf0
sock_ioctl+0x1ce/0x2e0
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x5c/0xf0
entry_SYSCALL_64_after_hwframe+0x78/0x80
...
This happens when copying the coredump segment list in
bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command.
The info->dest_buf buffer is allocated based on the number of coredump
segments returned by the FW. The segment list is then DMA'ed by
the FW and the length of the DMA is returned by FW. The driver then
copies this DMA'ed segment list to info->dest_buf.
In some cases, this DMA length may exceed the info->dest_buf length
and cause the above BUG condition. Fix it by capping the copy
length to not exceed the length of info->dest_buf. The extra
DMA data contains no useful information.
This code path is shared for the HWRM_DBG_COREDUMP_LIST and the
HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different
for these 2 FW commands. To simplify the logic, we need to move
the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE
up, so that the new check to cap the copy length will work for both
commands. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations
On Adva boards, SMA sysfs store/get operations can call
__handle_signal_outputs() or __handle_signal_inputs() while the `irig`
and `dcf` pointers are uninitialized, leading to a NULL pointer
dereference in __handle_signal() and causing a kernel crash. Adva boards
don't use `irig` or `dcf` functionality, so add Adva-specific callbacks
`ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that
avoid invoking `irig` or `dcf` input/output routines. |
| Flash Player versions 31.0.0.153 and earlier, and 31.0.0.108 and earlier have a use after free vulnerability. Successful exploitation could lead to arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix io_req_prep_async with provided buffers
io_req_prep_async() can import provided buffers, commit the ring state
by giving up on that before, it'll be reimported later if needed. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: wcd937x: fix a potential memory leak in wcd937x_soc_codec_probe()
When snd_soc_dapm_new_controls() or snd_soc_dapm_add_routes() fails,
wcd937x_soc_codec_probe() returns without releasing 'wcd937x->clsh_info',
which is allocated by wcd_clsh_ctrl_alloc. Add wcd_clsh_ctrl_free()
to prevent potential memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifi
In certain cases, hardware might provide packets with a
length greater than the maximum native Wi-Fi header length.
This can lead to accessing and modifying fields in the header
within the ath12k_dp_rx_h_undecap_nwifi function for
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and
potentially resulting in invalid data access and memory corruption.
Add a sanity check before processing the SKB to prevent invalid
data access in the undecap native Wi-Fi function for the
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_process
Currently, ath12k_dp_mon_srng_process uses ath12k_hal_srng_src_get_next_entry
to fetch the next entry from the destination ring. This is incorrect because
ath12k_hal_srng_src_get_next_entry is intended for source rings, not destination
rings. This leads to invalid entry fetches, causing potential data corruption or
crashes due to accessing incorrect memory locations. This happens because the
source ring and destination ring have different handling mechanisms and using
the wrong function results in incorrect pointer arithmetic and ring management.
To fix this issue, replace the call to ath12k_hal_srng_src_get_next_entry with
ath12k_hal_srng_dst_get_next_entry in ath12k_dp_mon_srng_process. This ensures
that the correct function is used for fetching entries from the destination
ring, preventing invalid memory accesses.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pci: Fix duplicate pci_dev_put() in disable_slot() when PF has child VFs
With commit bcb5d6c76903 ("s390/pci: introduce lock to synchronize state
of zpci_dev's") the code to ignore power off of a PF that has child VFs
was changed from a direct return to a goto to the unlock and
pci_dev_put() section. The change however left the existing pci_dev_put()
untouched resulting in a doubple put. This can subsequently cause a use
after free if the struct pci_dev is released in an unexpected state.
Fix this by removing the extra pci_dev_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix panic in failed foilio allocation
commit 7e119cff9d0a ("ocfs2: convert w_pages to w_folios") and commit
9a5e08652dc4b ("ocfs2: use an array of folios instead of an array of
pages") save -ENOMEM in the folio array upon allocation failure and call
the folio array free code.
The folio array free code expects either valid folio pointers or NULL.
Finding the -ENOMEM will result in a panic. Fix by NULLing the error
folio entry. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix UAF in __close_file_table_ids
A use-after-free is possible if one thread destroys the file
via __ksmbd_close_fd while another thread holds a reference to
it. The existing checks on fp->refcount are not sufficient to
prevent this.
The fix takes ft->lock around the section which removes the
file from the file table. This prevents two threads acquiring the
same file pointer via __close_file_table_ids, as well as the other
functions which retrieve a file from the IDR and which already use
this same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: fix race condition in unaccepted memory handling
The page allocator tracks the number of zones that have unaccepted memory
using static_branch_enc/dec() and uses that static branch in hot paths to
determine if it needs to deal with unaccepted memory.
Borislav and Thomas pointed out that the tracking is racy: operations on
static_branch are not serialized against adding/removing unaccepted pages
to/from the zone.
Sanity checks inside static_branch machinery detects it:
WARNING: CPU: 0 PID: 10 at kernel/jump_label.c:276 __static_key_slow_dec_cpuslocked+0x8e/0xa0
The comment around the WARN() explains the problem:
/*
* Warn about the '-1' case though; since that means a
* decrement is concurrent with a first (0->1) increment. IOW
* people are trying to disable something that wasn't yet fully
* enabled. This suggests an ordering problem on the user side.
*/
The effect of this static_branch optimization is only visible on
microbenchmark.
Instead of adding more complexity around it, remove it altogether. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking
The current implementation uses bias_pad_enable as a reference count to
manage the shared bias pad for all UTMI PHYs. However, during system
suspension with connected USB devices, multiple power-down requests for
the UTMI pad result in a mismatch in the reference count, which in turn
produces warnings such as:
[ 237.762967] WARNING: CPU: 10 PID: 1618 at tegra186_utmi_pad_power_down+0x160/0x170
[ 237.763103] Call trace:
[ 237.763104] tegra186_utmi_pad_power_down+0x160/0x170
[ 237.763107] tegra186_utmi_phy_power_off+0x10/0x30
[ 237.763110] phy_power_off+0x48/0x100
[ 237.763113] tegra_xusb_enter_elpg+0x204/0x500
[ 237.763119] tegra_xusb_suspend+0x48/0x140
[ 237.763122] platform_pm_suspend+0x2c/0xb0
[ 237.763125] dpm_run_callback.isra.0+0x20/0xa0
[ 237.763127] __device_suspend+0x118/0x330
[ 237.763129] dpm_suspend+0x10c/0x1f0
[ 237.763130] dpm_suspend_start+0x88/0xb0
[ 237.763132] suspend_devices_and_enter+0x120/0x500
[ 237.763135] pm_suspend+0x1ec/0x270
The root cause was traced back to the dynamic power-down changes
introduced in commit a30951d31b25 ("xhci: tegra: USB2 pad power controls"),
where the UTMI pad was being powered down without verifying its current
state. This unbalanced behavior led to discrepancies in the reference
count.
To rectify this issue, this patch replaces the single reference counter
with a bitmask, renamed to utmi_pad_enabled. Each bit in the mask
corresponds to one of the four USB2 PHYs, allowing us to track each pad's
enablement status individually.
With this change:
- The bias pad is powered on only when the mask is clear.
- Each UTMI pad is powered on or down based on its corresponding bit
in the mask, preventing redundant operations.
- The overall power state of the shared bias pad is maintained
correctly during suspend/resume cycles.
The mutex used to prevent race conditions during UTMI pad enable/disable
operations has been moved from the tegra186_utmi_bias_pad_power_on/off
functions to the parent functions tegra186_utmi_pad_power_on/down. This
change ensures that there are no race conditions when updating the bitmask. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: bpf_iter_scx_dsq_new() should always initialize iterator
BPF programs may call next() and destroy() on BPF iterators even after new()
returns an error value (e.g. bpf_for_each() macro ignores error returns from
new()). bpf_iter_scx_dsq_new() could leave the iterator in an uninitialized
state after an error return causing bpf_iter_scx_dsq_next() to dereference
garbage data. Make bpf_iter_scx_dsq_new() always clear $kit->dsq so that
next() and destroy() become noops. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
Make sure that n_channels is set after allocating the
struct cfg80211_registered_device::int_scan_req member. Seen with
syzkaller:
UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5
index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]')
This was missed in the initial conversions because I failed to locate
the allocation likely due to the "sizeof(void *)" not matching the
"channels" array type. |
