| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Rsyslog is a rocket-fast system for log processing. Modules for TCP syslog reception have a potential heap buffer overflow when octet-counted framing is used. This can result in a segfault or some other malfunction. As of our understanding, this vulnerability can not be used for remote code execution. But there may still be a slight chance for experts to do that. The bug occurs when the octet count is read. While there is a check for the maximum number of octets, digits are written to a heap buffer even when the octet count is over the maximum, This can be used to overrun the memory buffer. However, once the sequence of digits stop, no additional characters can be added to the buffer. In our opinion, this makes remote exploits impossible or at least highly complex. Octet-counted framing is one of two potential framing modes. It is relatively uncommon, but enabled by default on receivers. Modules `imtcp`, `imptcp`, `imgssapi`, and `imhttp` are used for regular syslog message reception. It is best practice not to directly expose them to the public. When this practice is followed, the risk is considerably lower. Module `imdiag` is a diagnostics module primarily intended for testbench runs. We do not expect it to be present on any production installation. Octet-counted framing is not very common. Usually, it needs to be specifically enabled at senders. If users do not need it, they can turn it off for the most important modules. This will mitigate the vulnerability. |
| go-tuf is a Go implementation of The Update Framework (TUF). go-tuf does not correctly implement the client workflow for updating the metadata files for roles other than the root role. Specifically, checks for rollback attacks are not implemented correctly meaning an attacker can cause clients to install software that is older than the software which the client previously knew to be available, and may include software with known vulnerabilities. In more detail, the client code of go-tuf has several issues in regards to preventing rollback attacks: 1. It does not take into account the content of any previously trusted metadata, if available, before proceeding with updating roles other than the root role (i.e., steps 5.4.3.1 and 5.5.5 of the detailed client workflow). This means that any form of version verification done on the newly-downloaded metadata is made using the default value of zero, which always passes. 2. For both timestamp and snapshot roles, go-tuf saves these metadata files as trusted before verifying if the version of the metafiles they refer to is correct (i.e., steps 5.5.4 and 5.6.4 of the detailed client workflow). A fix is available in version 0.3.0 or newer. No workarounds are known for this issue apart from upgrading. |
| runc is a CLI tool for spawning and running containers on Linux according to the OCI specification. A bug was found in runc prior to version 1.1.2 where `runc exec --cap` created processes with non-empty inheritable Linux process capabilities, creating an atypical Linux environment and enabling programs with inheritable file capabilities to elevate those capabilities to the permitted set during execve(2). This bug did not affect the container security sandbox as the inheritable set never contained more capabilities than were included in the container's bounding set. This bug has been fixed in runc 1.1.2. This fix changes `runc exec --cap` behavior such that the additional capabilities granted to the process being executed (as specified via `--cap` arguments) do not include inheritable capabilities. In addition, `runc spec` is changed to not set any inheritable capabilities in the created example OCI spec (`config.json`) file. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Argo CD starting with version 0.7.0 and prior to versions 2.1.15m 2.2.9, and 2.3.4 is vulnerable to a symlink following bug allowing a malicious user with repository write access to leak sensitive files from Argo CD's repo-server. A malicious Argo CD user with write access for a repository which is (or may be) used in a directory-type Application may commit a symlink which points to an out-of-bounds file. Sensitive files which could be leaked include manifest files from other Applications' source repositories (potentially decrypted files, if you are using a decryption plugin) or any JSON-formatted secrets which have been mounted as files on the repo-server. A patch for this vulnerability has been released in Argo CD versions 2.3.4, 2.2.9, and 2.1.15. Users of versions 2.3.0 or above who do not have any Jsonnet/directory-type Applications may disable the Jsonnet/directory config management tool as a workaround. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. A vulnerability was found in Argo CD prior to versions 2.3.4, 2.2.9, and 2.1.15 that allows an attacker to spoof error messages on the login screen when single sign on (SSO) is enabled. In order to exploit this vulnerability, an attacker would have to trick the victim to visit a specially crafted URL which contains the message to be displayed. As far as the research of the Argo CD team concluded, it is not possible to specify any active content (e.g. Javascript) or other HTML fragments (e.g. clickable links) in the spoofed message. A patch for this vulnerability has been released in Argo CD versions 2.3.4, 2.2.9, and 2.1.15. There are currently no known workarounds. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. A critical vulnerability has been discovered in Argo CD starting with version 1.4.0 and prior to versions 2.1.15, 2.2.9, and 2.3.4 which would allow unauthenticated users to impersonate as any Argo CD user or role, including the `admin` user, by sending a specifically crafted JSON Web Token (JWT) along with the request. In order for this vulnerability to be exploited, anonymous access to the Argo CD instance must have been enabled. In a default Argo CD installation, anonymous access is disabled. The vulnerability can be exploited to impersonate as any user or role, including the built-in `admin` account regardless of whether it is enabled or disabled. Also, the attacker does not need an account on the Argo CD instance in order to exploit this. If anonymous access to the instance is enabled, an attacker can escalate their privileges, effectively allowing them to gain the same privileges on the cluster as the Argo CD instance, which is cluster admin in a default installation. This will allow the attacker to create, manipulate and delete any resource on the cluster. They may also exfiltrate data by deploying malicious workloads with elevated privileges, thus bypassing any redaction of sensitive data otherwise enforced by the Argo CD API. A patch for this vulnerability has been released in Argo CD versions 2.3.4, 2.2.9, and 2.1.15. As a workaround, one may disable anonymous access, but upgrading to a patched version is preferable. |
| Envoy is a cloud-native high-performance proxy. Versions of envoy prior to 1.22.1 are subject to a segmentation fault in the GrpcHealthCheckerImpl. Envoy can perform various types of upstream health checking. One of them uses gRPC. Envoy also has a feature which can “hold” (prevent removal) upstream hosts obtained via service discovery until configured active health checking fails. If an attacker controls an upstream host and also controls service discovery of that host (via DNS, the EDS API, etc.), an attacker can crash Envoy by forcing removal of the host from service discovery, and then failing the gRPC health check request. This will crash Envoy via a null pointer dereference. Users are advised to upgrade to resolve this vulnerability. Users unable to upgrade may disable gRPC health checking and/or replace it with a different health checking type as a mitigation. |
| Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 the OAuth filter would try to invoke the remaining filters in the chain after emitting a local response, which triggers an ASSERT() in newer versions and corrupts memory on earlier versions. continueDecoding() shouldn’t ever be called from filters after a local reply has been sent. Users are advised to upgrade. There are no known workarounds for this issue. |
| Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 the OAuth filter implementation does not include a mechanism for validating access tokens, so by design when the HMAC signed cookie is missing a full authentication flow should be triggered. However, the current implementation assumes that access tokens are always validated thus allowing access in the presence of any access token attached to the request. Users are advised to upgrade. There is no known workaround for this issue. |
| semantic-release is an open source npm package for automated version management and package publishing. In affected versions secrets that would normally be masked by semantic-release can be accidentally disclosed if they contain characters that are excluded from uri encoding by `encodeURI`. Occurrence is further limited to execution contexts where push access to the related repository is not available without modifying the repository url to inject credentials. Users are advised to upgrade. Users unable to upgrade should ensure that secrets that do not contain characters that are excluded from encoding with `encodeURI` when included in a URL are already masked properly. |
| Istio is an open platform to connect, manage, and secure microservices. In affected versions ill-formed headers sent to Envoy in certain configurations can lead to unexpected memory access resulting in undefined behavior or crashing. Users are most likely at risk if they have an Istio ingress Gateway exposed to external traffic. This vulnerability has been resolved in versions 1.12.8, 1.13.5, and 1.14.1. Users are advised to upgrade. There are no known workarounds for this issue. |
| When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended. |
| A flaw was found in the Linux kernel. This flaw allows an attacker to crash the Linux kernel by simulating amateur radio from the user space, resulting in a null-ptr-deref vulnerability and a use-after-free vulnerability. |
| Argo CD is a declarative continuous deployment for Kubernetes. Argo CD versions v0.7.0 and later are vulnerable to an uncontrolled memory consumption bug, allowing an authorized malicious user to crash the repo-server service, resulting in a Denial of Service. The attacker must be an authenticated Argo CD user authorized to deploy Applications from a repository which contains (or can be made to contain) a large file. The fix for this vulnerability is available in versions 2.3.5, 2.2.10, 2.1.16, and later. There are no known workarounds. Users are recommended to upgrade. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. All versions of Argo CD starting with v0.11.0 are vulnerable to a variety of attacks when an SSO login is initiated from the Argo CD CLI or UI. The vulnerabilities are due to the use of insufficiently random values in parameters in Oauth2/OIDC login flows. In each case, using a relatively-predictable (time-based) seed in a non-cryptographically-secure pseudo-random number generator made the parameter less random than required by the relevant spec or by general best practices. In some cases, using too short a value made the entropy even less sufficient. The attacks on login flows which are meant to be mitigated by these parameters are difficult to accomplish but can have a high impact potentially granting an attacker admin access to Argo CD. Patches for this vulnerability has been released in the following Argo CD versions: v2.4.1, v2.3.5, v2.2.10 and v2.1.16. There are no known workarounds for this vulnerability. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. All versions of Argo CD starting with v1.0.0 are vulnerable to a cross-site scripting (XSS) bug allowing a malicious user to inject a `javascript:` link in the UI. When clicked by a victim user, the script will execute with the victim's permissions (up to and including admin). The script would be capable of doing anything which is possible in the UI or via the API, such as creating, modifying, and deleting Kubernetes resources. A patch for this vulnerability has been released in the following Argo CD versions: v2.4.1, v2.3.5, v2.2.10 and v2.1.16. There are no completely-safe workarounds besides upgrading. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. All versions of Argo CD starting with v1.3.0 are vulnerable to a symlink following bug allowing a malicious user with repository write access to leak sensitive YAML files from Argo CD's repo-server. A malicious Argo CD user with write access for a repository which is (or may be) used in a Helm-type Application may commit a symlink which points to an out-of-bounds file. If the target file is a valid YAML file, the attacker can read the contents of that file. Sensitive files which could be leaked include manifest files from other Applications' source repositories (potentially decrypted files, if you are using a decryption plugin) or any YAML-formatted secrets which have been mounted as files on the repo-server. Patches for this vulnerability has been released in the following Argo CD versions: v2.4.1, v2.3.5, v2.2.10 and v2.1.16. If you are using a version >=v2.3.0 and do not have any Helm-type Applications you may disable the Helm config management tool as a workaround. |
| UltraJSON is a fast JSON encoder and decoder written in pure C with bindings for Python 3.7+. In versions prior to 5.4.0 an error occurring while reallocating a buffer for string decoding can cause the buffer to get freed twice. Due to how UltraJSON uses the internal decoder, this double free is impossible to trigger from Python. This issue has been resolved in version 5.4.0 and all users should upgrade to UltraJSON 5.4.0. There are no known workarounds for this issue. |
| Authorization Bypass Through User-Controlled Key vulnerability in Apache ZooKeeper. If SASL Quorum Peer authentication is enabled in ZooKeeper (quorum.auth.enableSasl=true), the authorization is done by verifying that the instance part in SASL authentication ID is listed in zoo.cfg server list. The instance part in SASL auth ID is optional and if it's missing, like 'eve@EXAMPLE.COM', the authorization check will be skipped. As a result an arbitrary endpoint could join the cluster and begin propagating counterfeit changes to the leader, essentially giving it complete read-write access to the data tree. Quorum Peer authentication is not enabled by default.
Users are recommended to upgrade to version 3.9.1, 3.8.3, 3.7.2, which fixes the issue.
Alternately ensure the ensemble election/quorum communication is protected by a firewall as this will mitigate the issue.
See the documentation for more details on correct cluster administration. |
| Issue summary: Checking excessively long DH keys or parameters may be very slow.
Impact summary: Applications that use the functions DH_check(), DH_check_ex()
or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long
delays. Where the key or parameters that are being checked have been obtained
from an untrusted source this may lead to a Denial of Service.
The function DH_check() performs various checks on DH parameters. One of those
checks confirms that the modulus ('p' parameter) is not too large. Trying to use
a very large modulus is slow and OpenSSL will not normally use a modulus which
is over 10,000 bits in length.
However the DH_check() function checks numerous aspects of the key or parameters
that have been supplied. Some of those checks use the supplied modulus value
even if it has already been found to be too large.
An application that calls DH_check() and supplies a key or parameters obtained
from an untrusted source could be vulernable to a Denial of Service attack.
The function DH_check() is itself called by a number of other OpenSSL functions.
An application calling any of those other functions may similarly be affected.
The other functions affected by this are DH_check_ex() and
EVP_PKEY_param_check().
Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications
when using the '-check' option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. |
