| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
PM: hibernate: Fix crash when freeing invalid crypto compressor
When crypto_alloc_acomp() fails, it returns an ERR_PTR value, not NULL.
The cleanup code in save_compressed_image() and load_compressed_image()
unconditionally calls crypto_free_acomp() without checking for ERR_PTR,
which causes crypto_acomp_tfm() to dereference an invalid pointer and
crash the kernel.
This can be triggered when the compression algorithm is unavailable
(e.g., CONFIG_CRYPTO_LZO not enabled).
Fix by adding IS_ERR_OR_NULL() checks before calling crypto_free_acomp()
and acomp_request_free(), similar to the existing kthread_stop() check.
[ rjw: Added 2 empty code lines ] |
| In the Linux kernel, the following vulnerability has been resolved:
net/ena: fix missing lock when update devlink params
Fix assert lock warning while calling devl_param_driverinit_value_set()
in ena.
WARNING: net/devlink/core.c:261 at devl_assert_locked+0x62/0x90, CPU#0: kworker/0:0/9
CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.19.0-rc2+ #1 PREEMPT(lazy)
Hardware name: Amazon EC2 m8i-flex.4xlarge/, BIOS 1.0 10/16/2017
Workqueue: events work_for_cpu_fn
RIP: 0010:devl_assert_locked+0x62/0x90
Call Trace:
<TASK>
devl_param_driverinit_value_set+0x15/0x1c0
ena_devlink_alloc+0x18c/0x220 [ena]
? __pfx_ena_devlink_alloc+0x10/0x10 [ena]
? trace_hardirqs_on+0x18/0x140
? lockdep_hardirqs_on+0x8c/0x130
? __raw_spin_unlock_irqrestore+0x5d/0x80
? __raw_spin_unlock_irqrestore+0x46/0x80
? devm_ioremap_wc+0x9a/0xd0
ena_probe+0x4d2/0x1b20 [ena]
? __lock_acquire+0x56a/0xbd0
? __pfx_ena_probe+0x10/0x10 [ena]
? local_clock+0x15/0x30
? __lock_release.isra.0+0x1c9/0x340
? mark_held_locks+0x40/0x70
? lockdep_hardirqs_on_prepare.part.0+0x92/0x170
? trace_hardirqs_on+0x18/0x140
? lockdep_hardirqs_on+0x8c/0x130
? __raw_spin_unlock_irqrestore+0x5d/0x80
? __raw_spin_unlock_irqrestore+0x46/0x80
? __pfx_ena_probe+0x10/0x10 [ena]
......
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: fix device mismatch in devm_kzalloc/devm_kfree
Initial rss_hdr allocation uses virtio_device->device,
but virtnet_set_queues() frees using net_device->device.
This device mismatch causing below devres warning
[ 3788.514041] ------------[ cut here ]------------
[ 3788.514044] WARNING: drivers/base/devres.c:1095 at devm_kfree+0x84/0x98, CPU#16: vdpa/1463
[ 3788.514054] Modules linked in: octep_vdpa virtio_net virtio_vdpa [last unloaded: virtio_vdpa]
[ 3788.514064] CPU: 16 UID: 0 PID: 1463 Comm: vdpa Tainted: G W 6.18.0 #10 PREEMPT
[ 3788.514067] Tainted: [W]=WARN
[ 3788.514069] Hardware name: Marvell CN106XX board (DT)
[ 3788.514071] pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
[ 3788.514074] pc : devm_kfree+0x84/0x98
[ 3788.514076] lr : devm_kfree+0x54/0x98
[ 3788.514079] sp : ffff800084e2f220
[ 3788.514080] x29: ffff800084e2f220 x28: ffff0003b2366000 x27: 000000000000003f
[ 3788.514085] x26: 000000000000003f x25: ffff000106f17c10 x24: 0000000000000080
[ 3788.514089] x23: ffff00045bb8ab08 x22: ffff00045bb8a000 x21: 0000000000000018
[ 3788.514093] x20: ffff0004355c3080 x19: ffff00045bb8aa00 x18: 0000000000080000
[ 3788.514098] x17: 0000000000000040 x16: 000000000000001f x15: 000000000007ffff
[ 3788.514102] x14: 0000000000000488 x13: 0000000000000005 x12: 00000000000fffff
[ 3788.514106] x11: ffffffffffffffff x10: 0000000000000005 x9 : ffff800080c8c05c
[ 3788.514110] x8 : ffff800084e2eeb8 x7 : 0000000000000000 x6 : 000000000000003f
[ 3788.514115] x5 : ffff8000831bafe0 x4 : ffff800080c8b010 x3 : ffff0004355c3080
[ 3788.514119] x2 : ffff0004355c3080 x1 : 0000000000000000 x0 : 0000000000000000
[ 3788.514123] Call trace:
[ 3788.514125] devm_kfree+0x84/0x98 (P)
[ 3788.514129] virtnet_set_queues+0x134/0x2e8 [virtio_net]
[ 3788.514135] virtnet_probe+0x9c0/0xe00 [virtio_net]
[ 3788.514139] virtio_dev_probe+0x1e0/0x338
[ 3788.514144] really_probe+0xc8/0x3a0
[ 3788.514149] __driver_probe_device+0x84/0x170
[ 3788.514152] driver_probe_device+0x44/0x120
[ 3788.514155] __device_attach_driver+0xc4/0x168
[ 3788.514158] bus_for_each_drv+0x8c/0xf0
[ 3788.514161] __device_attach+0xa4/0x1c0
[ 3788.514164] device_initial_probe+0x1c/0x30
[ 3788.514168] bus_probe_device+0xb4/0xc0
[ 3788.514170] device_add+0x614/0x828
[ 3788.514173] register_virtio_device+0x214/0x258
[ 3788.514175] virtio_vdpa_probe+0xa0/0x110 [virtio_vdpa]
[ 3788.514179] vdpa_dev_probe+0xa8/0xd8
[ 3788.514183] really_probe+0xc8/0x3a0
[ 3788.514186] __driver_probe_device+0x84/0x170
[ 3788.514189] driver_probe_device+0x44/0x120
[ 3788.514192] __device_attach_driver+0xc4/0x168
[ 3788.514195] bus_for_each_drv+0x8c/0xf0
[ 3788.514197] __device_attach+0xa4/0x1c0
[ 3788.514200] device_initial_probe+0x1c/0x30
[ 3788.514203] bus_probe_device+0xb4/0xc0
[ 3788.514206] device_add+0x614/0x828
[ 3788.514209] _vdpa_register_device+0x58/0x88
[ 3788.514211] octep_vdpa_dev_add+0x104/0x228 [octep_vdpa]
[ 3788.514215] vdpa_nl_cmd_dev_add_set_doit+0x2d0/0x3c0
[ 3788.514218] genl_family_rcv_msg_doit+0xe4/0x158
[ 3788.514222] genl_rcv_msg+0x218/0x298
[ 3788.514225] netlink_rcv_skb+0x64/0x138
[ 3788.514229] genl_rcv+0x40/0x60
[ 3788.514233] netlink_unicast+0x32c/0x3b0
[ 3788.514237] netlink_sendmsg+0x170/0x3b8
[ 3788.514241] __sys_sendto+0x12c/0x1c0
[ 3788.514246] __arm64_sys_sendto+0x30/0x48
[ 3788.514249] invoke_syscall.constprop.0+0x58/0xf8
[ 3788.514255] do_el0_svc+0x48/0xd0
[ 3788.514259] el0_svc+0x48/0x210
[ 3788.514264] el0t_64_sync_handler+0xa0/0xe8
[ 3788.514268] el0t_64_sync+0x198/0x1a0
[ 3788.514271] ---[ end trace 0000000000000000 ]---
Fix by using virtio_device->device consistently for
allocation and deallocation |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: make calc_target() set t->paused, not just clear it
Currently calc_target() clears t->paused if the request shouldn't be
paused anymore, but doesn't ever set t->paused even though it's able to
determine when the request should be paused. Setting t->paused is left
to __submit_request() which is fine for regular requests but doesn't
work for linger requests -- since __submit_request() doesn't operate
on linger requests, there is nowhere for lreq->t.paused to be set.
One consequence of this is that watches don't get reestablished on
paused -> unpaused transitions in cases where requests have been paused
long enough for the (paused) unwatch request to time out and for the
subsequent (re)watch request to enter the paused state. On top of the
watch not getting reestablished, rbd_reregister_watch() gets stuck with
rbd_dev->watch_mutex held:
rbd_register_watch
__rbd_register_watch
ceph_osdc_watch
linger_reg_commit_wait
It's waiting for lreq->reg_commit_wait to be completed, but for that to
happen the respective request needs to end up on need_resend_linger list
and be kicked when requests are unpaused. There is no chance for that
if the request in question is never marked paused in the first place.
The fact that rbd_dev->watch_mutex remains taken out forever then
prevents the image from getting unmapped -- "rbd unmap" would inevitably
hang in D state on an attempt to grab the mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: call skb_orphan() before skb_attempt_defer_free()
Standard UDP receive path does not use skb->destructor.
But skmsg layer does use it, since it calls skb_set_owner_sk_safe()
from udp_read_skb().
This then triggers this warning in skb_attempt_defer_free():
DEBUG_NET_WARN_ON_ONCE(skb->destructor);
We must call skb_orphan() to fix this issue. |
| The MyRewards – Loyalty Points and Rewards for WooCommerce plugin for WordPress is vulnerable to missing authorization in all versions up to, and including, 5.6.0. This is due to the plugin not properly verifying that a user is authorized to perform an action in the 'ajax' function. This makes it possible for authenticated attackers, with subscriber level access and above, to modify, add, or delete loyalty program earning rules, including manipulating point multipliers to arbitrary values. |
| OXID eShop versions 6.x prior to 6.3.4 contains a SQL injection vulnerability in the 'sorting' parameter that allows attackers to insert malicious database content. Attackers can exploit the vulnerability by manipulating the sorting parameter to inject PHP code into the database and execute arbitrary code through crafted URLs. |
| CloudMe 1.11.2 contains a buffer overflow vulnerability that allows remote attackers to execute arbitrary code through crafted network packets. Attackers can exploit the vulnerability by sending a specially crafted payload to the CloudMe service running on port 8888, enabling remote code execution. |
| CraftCMS 3 vCard Plugin 1.0.0 contains a deserialization vulnerability that allows unauthenticated attackers to execute arbitrary PHP code through a crafted payload. Attackers can generate a malicious serialized payload that triggers remote code execution by exploiting the plugin's vCard download functionality with a specially crafted request. |
| Victor CMS 1.0 contains an authenticated file upload vulnerability that allows administrators to upload PHP files with arbitrary content through the user_image parameter. Attackers can upload a malicious PHP shell to the /img/ directory and execute system commands by accessing the uploaded file with a 'cmd' parameter. |
| webTareas 2.0.p8 contains a file deletion vulnerability in the print_layout.php administration component that allows authenticated attackers to delete arbitrary files. Attackers can exploit the vulnerability by manipulating the 'atttmp1' parameter to specify and delete files on the server through an unauthenticated file deletion mechanism. |
| Fishing Reservation System 7.5 contains multiple remote SQL injection vulnerabilities in admin.php, cart.php, and calendar.php that allow attackers to inject malicious SQL commands. Attackers can exploit vulnerable parameters like uid, pid, type, m, y, and code to compromise the database management system and web application without user interaction. |
| webERP 4.15.1 contains an unauthenticated file access vulnerability that allows remote attackers to download database backup files without authentication. Attackers can directly access generated backup files in the companies/weberp/ directory by requesting the Backup_[timestamp].sql.gz file. |
| PHP AddressBook 9.0.0.1 contains a time-based blind SQL injection vulnerability that allows remote attackers to manipulate database queries through the 'id' parameter. Attackers can inject crafted SQL statements with time delays to extract information by observing response times in the photo.php endpoint. |
| VirtualTablet Server 3.0.2 contains a denial of service vulnerability that allows attackers to crash the service by sending oversized string payloads through the Thrift protocol. Attackers can exploit the vulnerability by sending a long string to the send_say() method, causing the server to become unresponsive. |
| Easy Transfer 1.7 iOS mobile application contains a directory traversal vulnerability that allows remote attackers to access unauthorized file system paths without authentication. Attackers can exploit the vulnerability by manipulating path parameters in GET and POST requests to list or download sensitive system files and inject malicious scripts into application parameters. |
| Easy Transfer Wifi Transfer v1.7 for iOS contains a persistent cross-site scripting vulnerability that allows remote attackers to inject malicious scripts by manipulating the oldPath, newPath, and path parameters in Create Folder and Move/Edit functions. Attackers can exploit improper input validation via POST requests to execute arbitrary JavaScript in the context of the mobile web application. |
| School ERP Pro 1.0 contains a file disclosure vulnerability that allows unauthenticated attackers to read arbitrary files by manipulating the 'document' parameter in download.php. Attackers can access sensitive configuration files by supplying directory traversal paths to retrieve system credentials and configuration information. |
| School ERP Pro 1.0 contains a SQL injection vulnerability in the 'es_messagesid' parameter that allows attackers to manipulate database queries through GET requests. Attackers can exploit the vulnerable parameter by injecting crafted SQL statements to potentially extract, modify, or delete database information. |
| School ERP Pro 1.0 contains a file upload vulnerability that allows students to upload arbitrary PHP files to the messaging system. Attackers can upload malicious PHP scripts through the message attachment feature, enabling remote code execution on the server. |
