| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: xts - Handle EBUSY correctly
As it is xts only handles the special return value of EINPROGRESS,
which means that in all other cases it will free data related to the
request.
However, as the caller of xts may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way. Otherwise backlogged
requests will trigger a use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: fix UAF via HID_CLAIMED_INPUT validation
After hid_hw_start() is called hidinput_connect() will eventually be
called to set up the device with the input layer since the
HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect()
all input and output reports are processed and corresponding hid_inputs
are allocated and configured via hidinput_configure_usages(). This
process involves slot tagging report fields and configuring usages
by setting relevant bits in the capability bitmaps. However it is possible
that the capability bitmaps are not set at all leading to the subsequent
hidinput_has_been_populated() check to fail leading to the freeing of the
hid_input and the underlying input device.
This becomes problematic because a malicious HID device like a
ASUS ROG N-Key keyboard can trigger the above scenario via a
specially crafted descriptor which then leads to a user-after-free
when the name of the freed input device is written to later on after
hid_hw_start(). Below, report 93 intentionally utilises the
HID_UP_UNDEFINED Usage Page which is skipped during usage
configuration, leading to the frees.
0x05, 0x0D, // Usage Page (Digitizer)
0x09, 0x05, // Usage (Touch Pad)
0xA1, 0x01, // Collection (Application)
0x85, 0x0D, // Report ID (13)
0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00)
0x09, 0xC5, // Usage (0xC5)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x04, // Report Count (4)
0xB1, 0x02, // Feature (Data,Var,Abs)
0x85, 0x5D, // Report ID (93)
0x06, 0x00, 0x00, // Usage Page (Undefined)
0x09, 0x01, // Usage (0x01)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x1B, // Report Count (27)
0x81, 0x02, // Input (Data,Var,Abs)
0xC0, // End Collection
Below is the KASAN splat after triggering the UAF:
[ 21.672709] ==================================================================
[ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80
[ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54
[ 21.673700]
[ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary)
[ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 21.673700] Call Trace:
[ 21.673700] <TASK>
[ 21.673700] dump_stack_lvl+0x5f/0x80
[ 21.673700] print_report+0xd1/0x660
[ 21.673700] kasan_report+0xe5/0x120
[ 21.673700] __asan_report_store8_noabort+0x1b/0x30
[ 21.673700] asus_probe+0xeeb/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
[ 21.673700]
[ 21.673700] Allocated by task 54:
[ 21.673700] kasan_save_stack+0x3d/0x60
[ 21.673700] kasan_save_track+0x18/0x40
[ 21.673700] kasan_save_alloc_info+0x3b/0x50
[ 21.673700] __kasan_kmalloc+0x9c/0xa0
[ 21.673700] __kmalloc_cache_noprof+0x139/0x340
[ 21.673700] input_allocate_device+0x44/0x370
[ 21.673700] hidinput_connect+0xcb6/0x2630
[ 21.673700] hid_connect+0xf74/0x1d60
[ 21.673700] hid_hw_start+0x8c/0x110
[ 21.673700] asus_probe+0x5a3/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
[ 21.673700]
[ 21.673700] Freed by task 54:
[ 21.673700] kasan_save_stack+0x3d/0x60
[ 21.673700] kasan_save_track+0x18/0x40
[ 21.673700] kasan_save_free_info+0x3f/0x60
[ 21.673700] __kasan_slab_free+0x3c/0x50
[ 21.673700] kfre
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: rose: convert 'use' field to refcount_t
The 'use' field in struct rose_neigh is used as a reference counter but
lacks atomicity. This can lead to race conditions where a rose_neigh
structure is freed while still being referenced by other code paths.
For example, when rose_neigh->use becomes zero during an ioctl operation
via rose_rt_ioctl(), the structure may be removed while its timer is
still active, potentially causing use-after-free issues.
This patch changes the type of 'use' from unsigned short to refcount_t and
updates all code paths to use rose_neigh_hold() and rose_neigh_put() which
operate reference counts atomically. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: Detect events pointing to unexpected TREs
When a remote device sends a completion event to the host, it contains a
pointer to the consumed TRE. The host uses this pointer to process all of
the TREs between it and the host's local copy of the ring's read pointer.
This works when processing completion for chained transactions, but can
lead to nasty results if the device sends an event for a single-element
transaction with a read pointer that is multiple elements ahead of the
host's read pointer.
For instance, if the host accesses an event ring while the device is
updating it, the pointer inside of the event might still point to an old
TRE. If the host uses the channel's xfer_cb() to directly free the buffer
pointed to by the TRE, the buffer will be double-freed.
This behavior was observed on an ep that used upstream EP stack without
'commit 6f18d174b73d ("bus: mhi: ep: Update read pointer only after buffer
is written")'. Where the device updated the events ring pointer before
updating the event contents, so it left a window where the host was able to
access the stale data the event pointed to, before the device had the
chance to update them. The usual pattern was that the host received an
event pointing to a TRE that is not immediately after the last processed
one, so it got treated as if it was a chained transaction, processing all
of the TREs in between the two read pointers.
This commit aims to harden the host by ensuring transactions where the
event points to a TRE that isn't local_rp + 1 are chained.
[mani: added stable tag and reworded commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/debug_vm_pgtable: clear page table entries at destroy_args()
The mm/debug_vm_pagetable test allocates manually page table entries for
the tests it runs, using also its manually allocated mm_struct. That in
itself is ok, but when it exits, at destroy_args() it fails to clear those
entries with the *_clear functions.
The problem is that leaves stale entries. If another process allocates an
mm_struct with a pgd at the same address, it may end up running into the
stale entry. This is happening in practice on a debug kernel with
CONFIG_DEBUG_VM_PGTABLE=y, for example this is the output with some extra
debugging I added (it prints a warning trace if pgtables_bytes goes
negative, in addition to the warning at check_mm() function):
[ 2.539353] debug_vm_pgtable: [get_random_vaddr ]: random_vaddr is 0x7ea247140000
[ 2.539366] kmem_cache info
[ 2.539374] kmem_cachep 0x000000002ce82385 - freelist 0x0000000000000000 - offset 0x508
[ 2.539447] debug_vm_pgtable: [init_args ]: args->mm is 0x000000002267cc9e
(...)
[ 2.552800] WARNING: CPU: 5 PID: 116 at include/linux/mm.h:2841 free_pud_range+0x8bc/0x8d0
[ 2.552816] Modules linked in:
[ 2.552843] CPU: 5 UID: 0 PID: 116 Comm: modprobe Not tainted 6.12.0-105.debug_vm2.el10.ppc64le+debug #1 VOLUNTARY
[ 2.552859] Hardware name: IBM,9009-41A POWER9 (architected) 0x4e0202 0xf000005 of:IBM,FW910.00 (VL910_062) hv:phyp pSeries
[ 2.552872] NIP: c0000000007eef3c LR: c0000000007eef30 CTR: c0000000003d8c90
[ 2.552885] REGS: c0000000622e73b0 TRAP: 0700 Not tainted (6.12.0-105.debug_vm2.el10.ppc64le+debug)
[ 2.552899] MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 0000000a
[ 2.552954] CFAR: c0000000008f03f0 IRQMASK: 0
[ 2.552954] GPR00: c0000000007eef30 c0000000622e7650 c000000002b1ac00 0000000000000001
[ 2.552954] GPR04: 0000000000000008 0000000000000000 c0000000007eef30 ffffffffffffffff
[ 2.552954] GPR08: 00000000ffff00f5 0000000000000001 0000000000000048 0000000000004000
[ 2.552954] GPR12: 00000003fa440000 c000000017ffa300 c0000000051d9f80 ffffffffffffffdb
[ 2.552954] GPR16: 0000000000000000 0000000000000008 000000000000000a 60000000000000e0
[ 2.552954] GPR20: 4080000000000000 c0000000113af038 00007fffcf130000 0000700000000000
[ 2.552954] GPR24: c000000062a6a000 0000000000000001 8000000062a68000 0000000000000001
[ 2.552954] GPR28: 000000000000000a c000000062ebc600 0000000000002000 c000000062ebc760
[ 2.553170] NIP [c0000000007eef3c] free_pud_range+0x8bc/0x8d0
[ 2.553185] LR [c0000000007eef30] free_pud_range+0x8b0/0x8d0
[ 2.553199] Call Trace:
[ 2.553207] [c0000000622e7650] [c0000000007eef30] free_pud_range+0x8b0/0x8d0 (unreliable)
[ 2.553229] [c0000000622e7750] [c0000000007f40b4] free_pgd_range+0x284/0x3b0
[ 2.553248] [c0000000622e7800] [c0000000007f4630] free_pgtables+0x450/0x570
[ 2.553274] [c0000000622e78e0] [c0000000008161c0] exit_mmap+0x250/0x650
[ 2.553292] [c0000000622e7a30] [c0000000001b95b8] __mmput+0x98/0x290
[ 2.558344] [c0000000622e7a80] [c0000000001d1018] exit_mm+0x118/0x1b0
[ 2.558361] [c0000000622e7ac0] [c0000000001d141c] do_exit+0x2ec/0x870
[ 2.558376] [c0000000622e7b60] [c0000000001d1ca8] do_group_exit+0x88/0x150
[ 2.558391] [c0000000622e7bb0] [c0000000001d1db8] sys_exit_group+0x48/0x50
[ 2.558407] [c0000000622e7be0] [c00000000003d810] system_call_exception+0x1e0/0x4c0
[ 2.558423] [c0000000622e7e50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
(...)
[ 2.558892] ---[ end trace 0000000000000000 ]---
[ 2.559022] BUG: Bad rss-counter state mm:000000002267cc9e type:MM_ANONPAGES val:1
[ 2.559037] BUG: non-zero pgtables_bytes on freeing mm: -6144
Here the modprobe process ended up with an allocated mm_struct from the
mm_struct slab that was used before by the debug_vm_pgtable test. That is
not a problem, since the mm_stru
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Silence warning when chunk allocation fails in trace_pid_write
Syzkaller trigger a fault injection warning:
WARNING: CPU: 1 PID: 12326 at tracepoint_add_func+0xbfc/0xeb0
Modules linked in:
CPU: 1 UID: 0 PID: 12326 Comm: syz.6.10325 Tainted: G U 6.14.0-rc5-syzkaller #0
Tainted: [U]=USER
Hardware name: Google Compute Engine/Google Compute Engine
RIP: 0010:tracepoint_add_func+0xbfc/0xeb0 kernel/tracepoint.c:294
Code: 09 fe ff 90 0f 0b 90 0f b6 74 24 43 31 ff 41 bc ea ff ff ff
RSP: 0018:ffffc9000414fb48 EFLAGS: 00010283
RAX: 00000000000012a1 RBX: ffffffff8e240ae0 RCX: ffffc90014b78000
RDX: 0000000000080000 RSI: ffffffff81bbd78b RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffffffffef
R13: 0000000000000000 R14: dffffc0000000000 R15: ffffffff81c264f0
FS: 00007f27217f66c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2e80dff8 CR3: 00000000268f8000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tracepoint_probe_register_prio+0xc0/0x110 kernel/tracepoint.c:464
register_trace_prio_sched_switch include/trace/events/sched.h:222 [inline]
register_pid_events kernel/trace/trace_events.c:2354 [inline]
event_pid_write.isra.0+0x439/0x7a0 kernel/trace/trace_events.c:2425
vfs_write+0x24c/0x1150 fs/read_write.c:677
ksys_write+0x12b/0x250 fs/read_write.c:731
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
We can reproduce the warning by following the steps below:
1. echo 8 >> set_event_notrace_pid. Let tr->filtered_pids owns one pid
and register sched_switch tracepoint.
2. echo ' ' >> set_event_pid, and perform fault injection during chunk
allocation of trace_pid_list_alloc. Let pid_list with no pid and
assign to tr->filtered_pids.
3. echo ' ' >> set_event_pid. Let pid_list is NULL and assign to
tr->filtered_pids.
4. echo 9 >> set_event_pid, will trigger the double register
sched_switch tracepoint warning.
The reason is that syzkaller injects a fault into the chunk allocation
in trace_pid_list_alloc, causing a failure in trace_pid_list_set, which
may trigger double register of the same tracepoint. This only occurs
when the system is about to crash, but to suppress this warning, let's
add failure handling logic to trace_pid_list_set. |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: Fix UAF in polling when open file is released
A use-after-free (UAF) vulnerability was identified in the PSI (Pressure
Stall Information) monitoring mechanism:
BUG: KASAN: slab-use-after-free in psi_trigger_poll+0x3c/0x140
Read of size 8 at addr ffff3de3d50bd308 by task systemd/1
psi_trigger_poll+0x3c/0x140
cgroup_pressure_poll+0x70/0xa0
cgroup_file_poll+0x8c/0x100
kernfs_fop_poll+0x11c/0x1c0
ep_item_poll.isra.0+0x188/0x2c0
Allocated by task 1:
cgroup_file_open+0x88/0x388
kernfs_fop_open+0x73c/0xaf0
do_dentry_open+0x5fc/0x1200
vfs_open+0xa0/0x3f0
do_open+0x7e8/0xd08
path_openat+0x2fc/0x6b0
do_filp_open+0x174/0x368
Freed by task 8462:
cgroup_file_release+0x130/0x1f8
kernfs_drain_open_files+0x17c/0x440
kernfs_drain+0x2dc/0x360
kernfs_show+0x1b8/0x288
cgroup_file_show+0x150/0x268
cgroup_pressure_write+0x1dc/0x340
cgroup_file_write+0x274/0x548
Reproduction Steps:
1. Open test/cpu.pressure and establish epoll monitoring
2. Disable monitoring: echo 0 > test/cgroup.pressure
3. Re-enable monitoring: echo 1 > test/cgroup.pressure
The race condition occurs because:
1. When cgroup.pressure is disabled (echo 0 > cgroup.pressure), it:
- Releases PSI triggers via cgroup_file_release()
- Frees of->priv through kernfs_drain_open_files()
2. While epoll still holds reference to the file and continues polling
3. Re-enabling (echo 1 > cgroup.pressure) accesses freed of->priv
epolling disable/enable cgroup.pressure
fd=open(cpu.pressure)
while(1)
...
epoll_wait
kernfs_fop_poll
kernfs_get_active = true echo 0 > cgroup.pressure
... cgroup_file_show
kernfs_show
// inactive kn
kernfs_drain_open_files
cft->release(of);
kfree(ctx);
...
kernfs_get_active = false
echo 1 > cgroup.pressure
kernfs_show
kernfs_activate_one(kn);
kernfs_fop_poll
kernfs_get_active = true
cgroup_file_poll
psi_trigger_poll
// UAF
...
end: close(fd)
To address this issue, introduce kernfs_get_active_of() for kernfs open
files to obtain active references. This function will fail if the open file
has been released. Replace kernfs_get_active() with kernfs_get_active_of()
to prevent further operations on released file descriptors. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix a use-after-free in nouveau_gem_prime_import_sg_table()
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm will call nouveau_bo_del_ttm() and
free the memory.Thus, when nouveau_bo_init() returns an error, the gem
object has already been released. Then the call to nouveau_bo_ref() will
use the freed "nvbo->bo" and lead to a use-after-free bug.
We should delete the call to nouveau_bo_ref() to avoid the use-after-free. |
| FreeImage 3.18.0 contains a Use After Free in PluginTARGA.cpp;loadRLE(). |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, a heap use-after-free occurs in irp_thread_func because the IRP is freed by irp->Complete() and then accessed again on the error path. This vulnerability is fixed in 3.20.1. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, a race in the serial channel IRP thread tracking allows a heap use‑after‑free when one thread removes an entry from serial->IrpThreads while another reads it. This vulnerability is fixed in 3.20.1. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, a race condition between the RDPGFX dynamic virtual channel thread and the SDL render thread leads to a heap use-after-free. Specifically, an escaped pointer to sdl->primary (SDL_Surface) is accessed after it has been freed during RDPGFX ResetGraphics handling. This vulnerability is fixed in 3.20.1. |
| A Double Free vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX and MX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On all SRX and MX Series platforms, when during TCP session establishment a specific sequence of packets is encountered a double free happens. This causes flowd to crash and the respective FPC to restart.
This issue affects Junos OS on SRX and MX Series:
* all versions before 22.4R3-S7,
* 23.2 versions before 23.2R2-S3,
* 23.4 versions before 23.4R2-S4,
* 24.2 versions before 24.2R2. |
| A Use After Free vulnerability was identified in the 802.1X authentication daemon (dot1xd) of Juniper Networks Junos OS and Junos OS Evolved that could allow an authenticated, network-adjacent attacker flapping a port to crash the dot1xd process, leading to a Denial of Service (DoS), or potentially execute arbitrary code within the context of the process running as root.
The issue is specific to the processing of a change in authorization (CoA) when a port bounce occurs. A pointer is freed but was then referenced later in the same code path. Successful exploitation is outside the attacker's direct control due to the specific timing of the two events required to execute the vulnerable code path.
This issue affects systems with 802.1X authentication port-based network access control (PNAC) enabled.
This issue affects:
Junos OS:
* from 23.2R2-S1 before 23.2R2-S5,
* from 23.4R2 before 23.4R2-S6,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2-S1,
* from 25.2 before 25.2R1-S2, 25.2R2;
Junos OS Evolved:
* from 23.2R2-S1 before 23.2R2-S5-EVO,
* from 23.4R2 before 23.4R2-S6-EVO,
* from 24.2 before 24.2R2-S3-EVO,
* from 24.4 before 24.4R2-S1-EVO,
* from 25.2 before 25.2R1-S2-EVO, 25.2R2-EVO. |
| A Use After Free vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS and Junos OS Evolved allows a network-based attacker authenticated with low privileges to cause a Denial-of-Service (DoS).
When telemetry collectors are frequently subscribing and unsubscribing to sensors continuously over a long period of time, telemetry-capable processes like chassisd, rpd or mib2d will crash and restart, which - depending on the process - can cause a complete outage until the system has recovered.
This issue affects:
Junos OS:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S5,
* 23.4 versions before 23.4R2;
Junos OS Evolved:
* all versions before 22.4R3-S8-EVO,
* 23.2 versions before 23.2R2-S5-EVO,
* 23.4 versions before 23.4R2-EVO. |
| CWE-415: Double Free vulnerability exists that could cause heap memory corruption when the end user imports a malicious project file (SSD file) shared by the attacker into Rapsody. |
| CWE-416: Use After Free vulnerability that could cause remote code execution when the end user imports the malicious project file (SSD file) into Rapsody. |
| In bigo_worker_thread of private/google-modules/video/gchips/bigo.c, there is a possible use after free due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Use After Free in PROCA driver prior to SMR Jan-2026 Release 1 allows local attackers to potentially execute arbitrary code. |
| Use after free in DualDAR prior to SMR Jan-2026 Release 1 allows local privileged attackers to execute arbitrary code. |
