| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| decompress_gunzip.c in BusyBox through 1.32.1 mishandles the error bit on the huft_build result pointer, with a resultant invalid free or segmentation fault, via malformed gzip data. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/sgx: Prevent attempts to reclaim poisoned pages
TL;DR: SGX page reclaim touches the page to copy its contents to
secondary storage. SGX instructions do not gracefully handle machine
checks. Despite this, the existing SGX code will try to reclaim pages
that it _knows_ are poisoned. Avoid even trying to reclaim poisoned pages.
The longer story:
Pages used by an enclave only get epc_page->poison set in
arch_memory_failure() but they currently stay on sgx_active_page_list until
sgx_encl_release(), with the SGX_EPC_PAGE_RECLAIMER_TRACKED flag untouched.
epc_page->poison is not checked in the reclaimer logic meaning that, if other
conditions are met, an attempt will be made to reclaim an EPC page that was
poisoned. This is bad because 1. we don't want that page to end up added
to another enclave and 2. it is likely to cause one core to shut down
and the kernel to panic.
Specifically, reclaiming uses microcode operations including "EWB" which
accesses the EPC page contents to encrypt and write them out to non-SGX
memory. Those operations cannot handle MCEs in their accesses other than
by putting the executing core into a special shutdown state (affecting
both threads with HT.) The kernel will subsequently panic on the
remaining cores seeing the core didn't enter MCE handler(s) in time.
Call sgx_unmark_page_reclaimable() to remove the affected EPC page from
sgx_active_page_list on memory error to stop it being considered for
reclaiming.
Testing epc_page->poison in sgx_reclaim_pages() would also work but I assume
it's better to add code in the less likely paths.
The affected EPC page is not added to &node->sgx_poison_page_list until
later in sgx_encl_release()->sgx_free_epc_page() when it is EREMOVEd.
Membership on other lists doesn't change to avoid changing any of the
lists' semantics except for sgx_active_page_list. There's a "TBD" comment
in arch_memory_failure() about pre-emptive actions, the goal here is not
to address everything that it may imply.
This also doesn't completely close the time window when a memory error
notification will be fatal (for a not previously poisoned EPC page) --
the MCE can happen after sgx_reclaim_pages() has selected its candidates
or even *inside* a microcode operation (actually easy to trigger due to
the amount of time spent in them.)
The spinlock in sgx_unmark_page_reclaimable() is safe because
memory_failure() runs in process context and no spinlocks are held,
explicitly noted in a mm/memory-failure.c comment. |
| The KMIP response parser built into mongo binaries is overly tolerant of certain malformed packets, and may parse them into invalid objects. Later reads of this object can result in read access violations. |
| Mastodon is a free, open-source social network server based on ActivityPub. In Mastodon version 4.4, support for verifiable quote posts with quote controls was added, but it is possible for an attacker to bypass these controls in Mastodon versions prior to 4.4.8 and 4.5.0-beta.2. Mastodon internally treats reblogs as statuses. Since they were not special-treated, an attacker could reblog any post, then quote their reblog, technically quoting themselves, but having the quote feature a preview of the post they did not get authorization for with all of the affordances that would be otherwise denied by the quote controls. This issue has been patched in versions 4.4.8 and 4.5.0-beta.2. |
| Sandbox escape due to incorrect boundary conditions in the Graphics: CanvasWebGL component. This vulnerability affects Firefox < 146, Firefox ESR < 115.31, Firefox ESR < 140.6, Thunderbird < 146, and Thunderbird < 140.6. |
| matrix-sdk-base is the base component to build a Matrix client library. Versions 0.14.1 and prior are unable to handle responses that include custom m.room.join_rules values due to a serialization bug. This can be exploited to cause a denial-of-service condition, if a user is invited to a room with non-standard join rules, the crate's sync process will stall, preventing further processing for all rooms. This is fixed in version 0.16.0. |
| NVIDIA Triton Inference Server contains a vulnerability where an attacker may cause an improper check for unusual or exceptional conditions issue by sending extra large payloads. A successful exploit of this vulnerability may lead to denial of service. |
| python-ldap is a lightweight directory access protocol (LDAP) client API for Python. In versions prior to 3.4.5, the sanitization method `ldap.filter.escape_filter_chars` can be tricked to skip escaping of special characters when a crafted `list` or `dict` is supplied as the `assertion_value` parameter, and the non-default `escape_mode=1` is configured. The method `ldap.filter.escape_filter_chars` supports 3 different escaping modes. `escape_mode=0` (default) and `escape_mode=2` happen to raise exceptions when a `list` or `dict` object is supplied as the `assertion_value` parameter. However, `escape_mode=1` computes without performing adequate logic to ensure a fully escaped return value. If an application relies on the vulnerable method in the `python-ldap` library to escape untrusted user input, an attacker might be able to abuse the vulnerability to launch ldap injection attacks which could potentially disclose or manipulate ldap data meant to be inaccessible to them. Version 3.4.5 fixes the issue by adding a type check at the start of the `ldap.filter.escape_filter_chars` method to raise an exception when the supplied `assertion_value` parameter is not of type `str`. |
| DataHub is an open-source metadata platform. In the event a system is using Java Authentication and Authorization Service (JAAS) authentication and that system is given a configuration which contains an error, the authentication for the system will fail open and allow an attacker to login using any username and password. The reason for this is that while an error is thrown in the `authenticateJaasUser` method it is swallowed without propagating the error. As a result of this issue unauthenticated users may gain access to the system. Users are advised to upgrade. There are no known workarounds for this issue. This vulnerability was discovered and reported by the GitHub Security lab and is tracked as GHSL-2022-081. |
| WebAssembly Micro Runtime (WAMR) is a lightweight standalone WebAssembly (Wasm) runtime. Prior to version 2.4.4, WAMR is susceptible to a segmentation fault in v128.store instruction. This issue has been patched in version 2.4.4. |
| Issue summary: Generating excessively long X9.42 DH keys or checking
excessively long X9.42 DH keys or parameters may be very slow.
Impact summary: Applications that use the functions DH_generate_key() to
generate an X9.42 DH key may experience long delays. Likewise, applications
that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check()
to check an X9.42 DH key or X9.42 DH parameters may experience long delays.
Where the key or parameters that are being checked have been obtained from
an untrusted source this may lead to a Denial of Service.
While DH_check() performs all the necessary checks (as of CVE-2023-3817),
DH_check_pub_key() doesn't make any of these checks, and is therefore
vulnerable for excessively large P and Q parameters.
Likewise, while DH_generate_key() performs a check for an excessively large
P, it doesn't check for an excessively large Q.
An application that calls DH_generate_key() or DH_check_pub_key() and
supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
DH_generate_key() and DH_check_pub_key() are also called by a number of
other OpenSSL functions. An application calling any of those other
functions may similarly be affected. The other functions affected by this
are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate().
Also vulnerable are the OpenSSL pkey command line application when using the
"-pubcheck" option, as well as the OpenSSL genpkey command line application.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. |
| Newtonsoft.Json before version 13.0.1 is affected by a mishandling of exceptional conditions vulnerability. Crafted data that is passed to the JsonConvert.DeserializeObject method may trigger a StackOverflow exception resulting in denial of service. Depending on the usage of the library, an unauthenticated and remote attacker may be able to cause the denial of service condition. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix handling of server side tls alerts
Scott Mayhew discovered a security exploit in NFS over TLS in
tls_alert_recv() due to its assumption it can read data from
the msg iterator's kvec..
kTLS implementation splits TLS non-data record payload between
the control message buffer (which includes the type such as TLS
aler or TLS cipher change) and the rest of the payload (say TLS
alert's level/description) which goes into the msg payload buffer.
This patch proposes to rework how control messages are setup and
used by sock_recvmsg().
If no control message structure is setup, kTLS layer will read and
process TLS data record types. As soon as it encounters a TLS control
message, it would return an error. At that point, NFS can setup a
kvec backed msg buffer and read in the control message such as a
TLS alert. Msg iterator can advance the kvec pointer as a part of
the copy process thus we need to revert the iterator before calling
into the tls_alert_recv. |
| Improper conditions check for some Intel(R) QAT Windows software before version 2.6.0. within Ring 3: User Applications may allow a denial of service. System software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (low) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Traefik is an HTTP reverse proxy and load balancer. In affected versions sending a GET request to any Traefik endpoint with the "Content-length" request header results in an indefinite hang with the default configuration. This vulnerability can be exploited by attackers to induce a denial of service. This vulnerability has been addressed in version 2.11.2 and 3.0.0-rc5. Users are advised to upgrade. For affected versions, this vulnerability can be mitigated by configuring the readTimeout option.
|
| A vulnerability exists in the Windows sandbox where an uninitialized value in memory can be leaked to a renderer from a broker when making a call to access an otherwise unavailable file. This results in the potential leaking of information stored at that memory location. *Note: this issue only occurs on Windows. Other operating systems are unaffected.*. This vulnerability affects Thunderbird < 60.7, Firefox < 67, and Firefox ESR < 60.7. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Drupal Drupal core allows Forceful Browsing.This issue affects Drupal core: from 8.0.0 before 10.4.9, from 10.5.0 before 10.5.6, from 11.0.0 before 11.1.9, from 11.2.0 before 11.2.8. |
| A flaw was found in libsoup. The libsoup soup_uri_decode_data_uri() function may crash when processing malformed data URI. This flaw allows an attacker to cause a denial of service (DoS). |
| A flaw was found in the json payload. If annotation based security is used to secure a REST resource, the JSON body that the resource may consume is being processed (deserialized) prior to the security constraints being evaluated and applied. This does not happen with configuration based security. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. When the ESP32 is in advertising mode, if it receives a connection request containing an invalid Access Address (AA) of 0x00000000 or 0xFFFFFFFF, advertising may stop unexpectedly. In this case, the controller may incorrectly report a connection event to the host, which can cause the application layer to assume that the device has successfully established a connection. This issue has been fixed in versions 5.5.2, 5.4.3, 5.3.5, 5.2.6, and 5.1.7. At time of publication versions 5.5.2, 5.3.5, and 5.1.7 have not been released but are fixed respectively in commits 3b95b50, e3d7042, and 75967b5. |
