| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Bare Metal Operator (BMO) implements a Kubernetes API for managing bare metal hosts in Metal3. Baremetal Operator enables users to load Secret from arbitrary namespaces upon deployment of the namespace scoped Custom Resource `BMCEventSubscription`. Prior to versions 0.8.1 and 0.9.1, an adversary Kubernetes account with only namespace level roles (e.g. a tenant controlling a namespace) may create a `BMCEventSubscription` in his authorized namespace and then load Secrets from his unauthorized namespaces to his authorized namespace via the Baremetal Operator, causing Secret Leakage. The patch makes BMO refuse to read Secrets from other namespace than where the corresponding BMH resource is. The patch does not change the `BMCEventSubscription` API in BMO, but stricter validation will fail the request at admission time. It will also prevent the controller reading such Secrets, in case the BMCES CR has already been deployed. The issue exists for all versions of BMO, and is patched in BMO releases v0.9.1 and v0.8.1. Prior upgrading to patched BMO version, duplicate any existing Secret pointed to by `BMCEventSubscription`'s `httpHeadersRef` to the same namespace where the corresponding BMH exists. After upgrade, remove the old Secrets. As a workaround, the operator can configure BMO RBAC to be namespace scoped, instead of cluster scoped, to prevent BMO from accessing Secrets from other namespaces, and/or use `WATCH_NAMESPACE` configuration option to limit BMO to single namespace. |
| HashiCorp go-getter up to 1.6.2 and 2.1.1 is vulnerable to decompression bombs. Fixed in 1.7.0 and 2.2.0. |
| Libreswan 4.9 allows remote attackers to cause a denial of service (assert failure and daemon restart) via crafted TS payload with an incorrect selector length. |
| Expr is an expression language and expression evaluation for Go. Prior to version 1.17.0, if the Expr expression parser is given an unbounded input string, it will attempt to compile the entire string and generate an Abstract Syntax Tree (AST) node for each part of the expression. In scenarios where input size isn’t limited, a malicious or inadvertent extremely large expression can consume excessive memory as the parser builds a huge AST. This can ultimately lead to*excessive memory usage and an Out-Of-Memory (OOM) crash of the process. This issue is relatively uncommon and will only manifest when there are no restrictions on the input size, i.e. the expression length is allowed to grow arbitrarily large. In typical use cases where inputs are bounded or validated, this problem would not occur. The problem has been patched in the latest versions of the Expr library. The fix introduces compile-time limits on the number of AST nodes and memory usage during parsing, preventing any single expression from exhausting resources. Users should upgrade to Expr version 1.17.0 or later, as this release includes the new node budget and memory limit safeguards. Upgrading to v1.17.0 ensures that extremely deep or large expressions are detected and safely aborted during compilation, avoiding the OOM condition. For users who cannot immediately upgrade, the recommended workaround is to impose an input size restriction before parsing. In practice, this means validating or limiting the length of expression strings that your application will accept. For example, set a maximum allowable number of characters (or nodes) for any expression and reject or truncate inputs that exceed this limit. By ensuring no unbounded-length expression is ever fed into the parser, one can prevent the parser from constructing a pathologically large AST and avoid potential memory exhaustion. In short, pre-validate and cap input size as a safeguard in the absence of the patch. |
| If errors returned from MarshalJSON methods contain user controlled data, they may be used to break the contextual auto-escaping behavior of the html/template package, allowing for subsequent actions to inject unexpected content into templates. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Versions of Argo CD starting with v1.8.2 and prior to 2.3.13, 2.4.19, 2.5.6, and 2.6.0-rc-3 are vulnerable to an improper authorization bug causing the API to accept certain invalid tokens. OIDC providers include an `aud` (audience) claim in signed tokens. The value of that claim specifies the intended audience(s) of the token (i.e. the service or services which are meant to accept the token). Argo CD _does_ validate that the token was signed by Argo CD's configured OIDC provider. But Argo CD _does not_ validate the audience claim, so it will accept tokens that are not intended for Argo CD. If Argo CD's configured OIDC provider also serves other audiences (for example, a file storage service), then Argo CD will accept a token intended for one of those other audiences. Argo CD will grant the user privileges based on the token's `groups` claim, even though those groups were not intended to be used by Argo CD. This bug also increases the impact of a stolen token. If an attacker steals a valid token for a different audience, they can use it to access Argo CD. A patch for this vulnerability has been released in versions 2.6.0-rc3, 2.5.6, 2.4.19, and 2.3.13. There are no workarounds. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Versions starting with 2.5.0-rc1 and above, prior to 2.5.8, and version 2.6.0-rc4, are vulnerable to an authorization bypass bug which allows a malicious Argo CD user to deploy Applications outside the configured allowed namespaces. Reconciled Application namespaces are specified as a comma-delimited list of glob patterns. When sharding is enabled on the Application controller, it does not enforce that list of patterns when reconciling Applications. For example, if Application namespaces are configured to be argocd-*, the Application controller may reconcile an Application installed in a namespace called other, even though it does not start with argocd-. Reconciliation of the out-of-bounds Application is only triggered when the Application is updated, so the attacker must be able to cause an update operation on the Application resource. This bug only applies to users who have explicitly enabled the "apps-in-any-namespace" feature by setting `application.namespaces` in the argocd-cmd-params-cm ConfigMap or otherwise setting the `--application-namespaces` flags on the Application controller and API server components. The apps-in-any-namespace feature is in beta as of this Security Advisory's publish date. The bug is also limited to Argo CD instances where sharding is enabled by increasing the `replicas` count for the Application controller. Finally, the AppProjects' `sourceNamespaces` field acts as a secondary check against this exploit. To cause reconciliation of an Application in an out-of-bounds namespace, an AppProject must be available which permits Applications in the out-of-bounds namespace. A patch for this vulnerability has been released in versions 2.5.8 and 2.6.0-rc5. As a workaround, running only one replica of the Application controller will prevent exploitation of this bug. Making sure all AppProjects' sourceNamespaces are restricted within the confines of the configured Application namespaces will also prevent exploitation of this bug. |
| Helm is a tool that streamlines installing and managing Kubernetes applications.`getHostByName` is a Helm template function introduced in Helm v3. The function is able to accept a hostname and return an IP address for that hostname. To get the IP address the function performs a DNS lookup. The DNS lookup happens when used with `helm install|upgrade|template` or when the Helm SDK is used to render a chart. Information passed into the chart can be disclosed to the DNS servers used to lookup the IP address. For example, a malicious chart could inject `getHostByName` into a chart in order to disclose values to a malicious DNS server. The issue has been fixed in Helm 3.11.1. Prior to using a chart with Helm verify the `getHostByName` function is not being used in a template to disclose any information you do not want passed to DNS servers. |
| Werkzeug is a comprehensive WSGI web application library. Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses `request.data`, `request.form`, `request.files`, or `request.get_data(parse_form_data=False)`, it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers. Version 2.2.3 contains a patch for this issue. |
| containerd is an open source container runtime. A bug was found in containerd prior to versions 1.6.18 and 1.5.18 where supplementary groups are not set up properly inside a container. If an attacker has direct access to a container and manipulates their supplementary group access, they may be able to use supplementary group access to bypass primary group restrictions in some cases, potentially gaining access to sensitive information or gaining the ability to execute code in that container. Downstream applications that use the containerd client library may be affected as well.
This bug has been fixed in containerd v1.6.18 and v.1.5.18. Users should update to these versions and recreate containers to resolve this issue. Users who rely on a downstream application that uses containerd's client library should check that application for a separate advisory and instructions. As a workaround, ensure that the `"USER $USERNAME"` Dockerfile instruction is not used. Instead, set the container entrypoint to a value similar to `ENTRYPOINT ["su", "-", "user"]` to allow `su` to properly set up supplementary groups. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. All Argo CD versions starting with 2.3.0-rc1 and prior to 2.3.17, 2.4.23 2.5.11, and 2.6.2 are vulnerable to an improper authorization bug which allows users who have the ability to update at least one cluster secret to update any cluster secret. The attacker could use this access to escalate privileges (potentially controlling Kubernetes resources) or to break Argo CD functionality (by preventing connections to external clusters). A patch for this vulnerability has been released in Argo CD versions 2.6.2, 2.5.11, 2.4.23, and 2.3.17. Two workarounds are available. Either modify the RBAC configuration to completely revoke all `clusters, update` access, or use the `destinations` and `clusterResourceWhitelist` fields to apply similar restrictions as the `namespaces` and `clusterResources` fields. |
| Users authorized to list or watch one type of namespaced custom resource cluster-wide can read custom resources of a different type in the same API group without authorization. Clusters are impacted by this vulnerability if all of the following are true: 1. There are 2+ CustomResourceDefinitions sharing the same API group 2. Users have cluster-wide list or watch authorization on one of those custom resources. 3. The same users are not authorized to read another custom resource in the same API group. |
| Users may have access to secure endpoints in the control plane network. Kubernetes clusters are only affected if an untrusted user can modify Node objects and send proxy requests to them. Kubernetes supports node proxying, which allows clients of kube-apiserver to access endpoints of a Kubelet to establish connections to Pods, retrieve container logs, and more. While Kubernetes already validates the proxying address for Nodes, a bug in kube-apiserver made it possible to bypass this validation. Bypassing this validation could allow authenticated requests destined for Nodes to to the API server's private network. |
| A path traversal vulnerability exists in filepath.Clean on Windows. On Windows, the filepath.Clean function could transform an invalid path such as "a/../c:/b" into the valid path "c:\b". This transformation of a relative (if invalid) path into an absolute path could enable a directory traversal attack. After fix, the filepath.Clean function transforms this path into the relative (but still invalid) path ".\c:\b". |
| A denial of service is possible from excessive resource consumption in net/http and mime/multipart. Multipart form parsing with mime/multipart.Reader.ReadForm can consume largely unlimited amounts of memory and disk files. This also affects form parsing in the net/http package with the Request methods FormFile, FormValue, ParseMultipartForm, and PostFormValue. ReadForm takes a maxMemory parameter, and is documented as storing "up to maxMemory bytes +10MB (reserved for non-file parts) in memory". File parts which cannot be stored in memory are stored on disk in temporary files. The unconfigurable 10MB reserved for non-file parts is excessively large and can potentially open a denial of service vector on its own. However, ReadForm did not properly account for all memory consumed by a parsed form, such as map entry overhead, part names, and MIME headers, permitting a maliciously crafted form to consume well over 10MB. In addition, ReadForm contained no limit on the number of disk files created, permitting a relatively small request body to create a large number of disk temporary files. With fix, ReadForm now properly accounts for various forms of memory overhead, and should now stay within its documented limit of 10MB + maxMemory bytes of memory consumption. Users should still be aware that this limit is high and may still be hazardous. In addition, ReadForm now creates at most one on-disk temporary file, combining multiple form parts into a single temporary file. The mime/multipart.File interface type's documentation states, "If stored on disk, the File's underlying concrete type will be an *os.File.". This is no longer the case when a form contains more than one file part, due to this coalescing of parts into a single file. The previous behavior of using distinct files for each form part may be reenabled with the environment variable GODEBUG=multipartfiles=distinct. Users should be aware that multipart.ReadForm and the http.Request methods that call it do not limit the amount of disk consumed by temporary files. Callers can limit the size of form data with http.MaxBytesReader. |
| Large handshake records may cause panics in crypto/tls. Both clients and servers may send large TLS handshake records which cause servers and clients, respectively, to panic when attempting to construct responses. This affects all TLS 1.3 clients, TLS 1.2 clients which explicitly enable session resumption (by setting Config.ClientSessionCache to a non-nil value), and TLS 1.3 servers which request client certificates (by setting Config.ClientAuth >= RequestClientCert). |
| Certifi is a curated collection of Root Certificates for validating the trustworthiness of SSL certificates while verifying the identity of TLS hosts. Certifi prior to version 2023.07.22 recognizes "e-Tugra" root certificates. e-Tugra's root certificates were subject to an investigation prompted by reporting of security issues in their systems. Certifi 2023.07.22 removes root certificates from "e-Tugra" from the root store. |
| HashiCorp Vault and Vault Enterprise’s approle auth method allowed any authenticated user with access to an approle destroy endpoint to destroy the secret ID of any other role by providing the secret ID accessor. This vulnerability is fixed in Vault 1.13.0, 1.12.4, 1.11.8, 1.10.11 and above. |
| Jenkins 2.393 and earlier, LTS 2.375.3 and earlier prints an error stack trace on agent-related pages when agent connections are broken, potentially revealing information about Jenkins configuration that is otherwise inaccessible to attackers. |
| Jenkins 2.393 and earlier, LTS 2.375.3 and earlier creates a temporary file in the default temporary directory with the default permissions for newly created files when uploading a file parameter through the CLI, potentially allowing attackers with access to the Jenkins controller file system to read and write the file before it is used. |
