| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Curam Social Program Management 8.0.0 and 8.0.1 does not invalidate session after logout which could allow an authenticated user to impersonate another user on the system. |
| IBM Curam Social Program Management 8.0.0 and 8.0.1 does not invalidate session after logout which could allow an authenticated user to impersonate another user on the system. IBM X-Force ID: 218281. |
| Improper session management vulnerability in Samsung Health prior to 6.20.1.005 prevents logging out from Samsung Health App. |
| An Incorrect Comparison vulnerability in PFE of Juniper Networks Junos OS allows an adjacent unauthenticated attacker to cause a Denial of Service (DoS). On QFX5000 Series, and EX4600 and EX4650 platforms, the fxpc process will crash followed by the FPC reboot upon receipt of a specific hostbound packet. Continued receipt of these specific packets will create a sustained Denial of Service (DoS) condition. This issue only affects Juniper Networks Junos OS 19.4 version 19.4R3-S4. |
| An Operation on a Resource after Expiration or Release vulnerability in the Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker with an established BGP session to cause a Denial of Service (DoS). This issue occurs when proxy-generate route-target filtering is enabled, and certain proxy-route add and delete events are happening. This issue affects: Juniper Networks Junos OS All versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S8, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S1; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R1-S2, 20.3R2. Juniper Networks Junos OS Evolved All versions prior to 20.1R3-EVO; 20.2 versions prior to 20.2R3-EVO; 20.3 versions prior to 20.3R2-EVO. |
| An Improper Access Control vulnerability in the Juniper Networks Paragon Active Assurance Control Center allows an unauthenticated attacker to leverage a crafted URL to generate PDF reports, potentially containing sensitive configuration information. A feature was introduced in version 3.1 of the Paragon Active Assurance Control Center which allows users to selective share account data using a unique identifier. Knowing the proper format of the URL and the identifier of an existing object in an application it is possible to get access to that object without being logged in, even if the object is not shared, resulting in the opportunity for malicious exfiltration of user data. Note that the Paragon Active Assurance Control Center SaaS offering is not affected by this issue. This issue affects Juniper Networks Paragon Active Assurance version 3.1.0. |
| Due to an Improper Initialization vulnerability in Juniper Networks Junos OS on EX4650 devices, packets received on the management interface (em0) but not destined to the device, may be improperly forwarded to an egress interface, instead of being discarded. Such traffic being sent by a client may appear genuine, but is non-standard in nature and should be considered as potentially malicious. This issue affects: Juniper Networks Junos OS on EX4650 Series: All versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R3-S5; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R3-S7; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S4; 20.3 versions prior to 20.3R3-S3; 20.4 versions prior to 20.4R3-S2; 21.1 versions prior to 21.1R3-S1; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2; 21.4 versions prior to 21.4R2; 22.1 versions prior to 22.1R1. |
| An Improper Locking vulnerability in the SIP ALG of Juniper Networks Junos OS on MX Series and SRX Series allows an unauthenticated networked attacker to cause a flowprocessing daemon (flowd) crash and thereby a Denial of Service (DoS). Continued receipt of these specific packets will cause a sustained Denial of Service condition. This issue can occur in a scenario where the SIP ALG is enabled and specific SIP messages are being processed simultaneously. This issue affects: Juniper Networks Junos OS on MX Series and SRX Series 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R2-S2, 21.1R3; 21.2 versions prior to 21.2R1-S2, 21.2R2; 21.3 versions prior to 21.3R1-S1, 21.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.4R1. |
| An Improper Initialization vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker who sends specific packets in certain orders and at specific timings to force OSPFv3 to unexpectedly enter graceful-restart (GR helper mode) even though there is not any Grace-LSA received in OSPFv3 causing a Denial of Service (DoS). Unexpectedly entering GR helper mode might cause the OSPFv3 neighbor adjacency formed on this interface to be stuck in the "INIT" state which can be observed by issuing the following command: user@device> show ospf3 neighbor ID Interface State xx.xx.xx.xx ae100.0 Init <<<<<<<<<< An indicator of compromise can be seen in log files when traceoptions for OSPFv3 are enabled before the issue occurs. These logfile messages are as follows: OSPF restart signaling: Received hello with LR bit set from nbr ip=xx::xx id=xx.xx.xx.xx. Set oob-resync capabilty 1. OSPF Restart Signaling: Start helper mode for nbr ip xx::xx id xx.xx.xx.xx OSPF restart signaling: abort helper mode for nbr ip=xx::xx id=xx.xx.xx.xx OSPF neighbor xx::xx (realm ipv6-unicast <interface.unit> area xx.xx.xx.xx) state changed from Full to Init due to 1WayRcvd (event reason: neighbor is in one-way mode) (nbr helped: 0) This issue affects: Juniper Networks Junos OS. 15.1 versions prior to 15.1R7-S11; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S10; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S4; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. This issue does not affect any version of Juniper Networks Junos OS 12.3. This issue affects Juniper Networks Junos OS Evolved all versions prior to 21.2R2-EVO. |
| An Improper Initialization vulnerability in Juniper Networks Junos OS Evolved may cause a commit operation for disabling the telnet service to not take effect as expected, resulting in the telnet service staying enabled. When it is not intended to be operating on the device, an administrator can issue the following command to verify whether telnet is operating in the background: user@device > show system connections | grep :23 tcp 0 0 0.0.0.0:23 0.0.0.0:* LISTEN 20879/xinetd This issue affects: Juniper Networks Junos OS Evolved All versions prior to 20.4R2-S2-EVO; 21.1 version 21.1R1-EVO and later versions; 21.2 versions prior to 21.2R2-EVO. |
| In a Junos Fusion scenario an External Control of Critical State Data vulnerability in the Satellite Device (SD) control state machine of Juniper Networks Junos OS allows an attacker who is able to make physical changes to the cabling of the device to cause a denial of service (DoS). An SD can get rebooted and subsequently controlled by an Aggregation Device (AD) which does not belong to the original Fusion setup and is just connected to an extended port of the SD. To carry out this attack the attacker needs to have physical access to the cabling between the SD and the original AD. This issue affects: Juniper Networks Junos OS 16.1R1 and later versions prior to 18.4R3-S10; 19.1 versions prior to 19.1R3-S7; 19.2 versions prior to 19.2R3-S4. This issue does not affect Juniper Networks Junos OS versions prior to 16.1R1. |
| A Protection Mechanism Failure vulnerability in the REST API of Juniper Networks Contrail Service Orchestration allows one tenant on the system to view confidential configuration details of another tenant on the same system. By utilizing the REST API, one tenant is able to obtain information on another tenant's firewall configuration and access control policies, as well as other sensitive information, exposing the tenant to reduced defense against malicious attacks or exploitation via additional undetermined vulnerabilities. This issue affects Juniper Networks Contrail Service Orchestration versions prior to 6.1.0 Patch 3. |
| All versions of package fast-string-search are vulnerable to Denial of Service (DoS) when computations are incorrect for non-string inputs. One can cause the V8 to attempt reading from non-permitted locations and cause a segmentation fault due to the violation. |
| In DayByDay CRM, versions 2.2.0 through 2.2.1 (latest) are vulnerable to Insufficient Session Expiration. When a password has been changed by the user or by an administrator, a user that was already logged in, will still have access to the application even after the password was changed. |
| Assertion occurs while processing Reconfiguration message due to improper validation |
| A Improper Restriction of XML External Entity Reference vulnerability in SUSE Open Build Service allows remote attackers to reference external entities in certain operations. This can be used to gain information from the server that can be abused to escalate to Admin privileges on OBS. This issue affects: SUSE Open Build Service Open Build Service versions prior to 2.10.13. |
| A Exposure of Resource to Wrong Sphere vulnerability in Rancher Desktop of SUSE allows attackers in the local network to connect to the Dashboard API (steve) to carry out arbitrary actions. This issue affects: SUSE Rancher Desktop versions prior to V. |
| A vulnerability in Metasys ADS/ADX/OAS 10 versions prior to 10.1.5 and Metasys ADS/ADX/OAS 11 versions prior to 11.0.2 allows unverified password change. |
| Under certain circumstances an authenticated user could lock other users out of the system or take over their accounts in Metasys ADS/ADX/OAS server 10 versions prior to 10.1.5 and Metasys ADS/ADX/OAS server 11 versions prior to 11.0.2. |
| In sched driver, there is a possible use after free due to improper locking. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS06479032; Issue ID: ALPS06479032. |
