| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix integer overflows on 32 bit systems
On 32bit systems the addition operations in ipc_msg_alloc() can
potentially overflow leading to memory corruption.
Add bounds checking using KSMBD_IPC_MAX_PAYLOAD to avoid overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: Fix class @block_class's subsystem refcount leakage
blkcg_fill_root_iostats() iterates over @block_class's devices by
class_dev_iter_(init|next)(), but does not end iterating with
class_dev_iter_exit(), so causes the class's subsystem refcount leakage.
Fix by ending the iterating with class_dev_iter_exit(). |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix possible int overflows in nilfs_fiemap()
Since nilfs_bmap_lookup_contig() in nilfs_fiemap() calculates its result
by being prepared to go through potentially maxblocks == INT_MAX blocks,
the value in n may experience an overflow caused by left shift of blkbits.
While it is extremely unlikely to occur, play it safe and cast right hand
expression to wider type to mitigate the issue.
Found by Linux Verification Center (linuxtesting.org) with static analysis
tool SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: nci: Add bounds checking in nci_hci_create_pipe()
The "pipe" variable is a u8 which comes from the network. If it's more
than 127, then it results in memory corruption in the caller,
nci_hci_connect_gate(). |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: Fix copy buffer page size
For non-registered buffer, fastrpc driver copies the buffer and
pass it to the remote subsystem. There is a problem with current
implementation of page size calculation which is not considering
the offset in the calculation. This might lead to passing of
improper and out-of-bounds page size which could result in
memory issue. Calculate page start and page end using the offset
adjusted address instead of absolute address. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: don't allow reconnect after disconnect
Following process can cause nbd_config UAF:
1) grab nbd_config temporarily;
2) nbd_genl_disconnect() flush all recv_work() and release the
initial reference:
nbd_genl_disconnect
nbd_disconnect_and_put
nbd_disconnect
flush_workqueue(nbd->recv_workq)
if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...))
nbd_config_put
-> due to step 1), reference is still not zero
3) nbd_genl_reconfigure() queue recv_work() again;
nbd_genl_reconfigure
config = nbd_get_config_unlocked(nbd)
if (!config)
-> succeed
if (!test_bit(NBD_RT_BOUND, ...))
-> succeed
nbd_reconnect_socket
queue_work(nbd->recv_workq, &args->work)
4) step 1) release the reference;
5) Finially, recv_work() will trigger UAF:
recv_work
nbd_config_put(nbd)
-> nbd_config is freed
atomic_dec(&config->recv_threads)
-> UAF
Fix the problem by clearing NBD_RT_BOUND in nbd_genl_disconnect(), so
that nbd_genl_reconfigure() will fail. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Send signals asynchronously if !preemptible
BPF programs can execute in all kinds of contexts and when a program
running in a non-preemptible context uses the bpf_send_signal() kfunc,
it will cause issues because this kfunc can sleep.
Change `irqs_disabled()` to `!preemptible()`. |
| In the Linux kernel, the following vulnerability has been resolved:
padata: fix UAF in padata_reorder
A bug was found when run ltp test:
BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0
Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206
CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+
Workqueue: pdecrypt_parallel padata_parallel_worker
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
print_address_description.constprop.0+0x6b/0x3d0
print_report+0xdd/0x2c0
kasan_report+0xa5/0xd0
padata_find_next+0x29/0x1a0
padata_reorder+0x131/0x220
padata_parallel_worker+0x3d/0xc0
process_one_work+0x2ec/0x5a0
If 'mdelay(10)' is added before calling 'padata_find_next' in the
'padata_reorder' function, this issue could be reproduced easily with
ltp test (pcrypt_aead01).
This can be explained as bellow:
pcrypt_aead_encrypt
...
padata_do_parallel
refcount_inc(&pd->refcnt); // add refcnt
...
padata_do_serial
padata_reorder // pd
while (1) {
padata_find_next(pd, true); // using pd
queue_work_on
...
padata_serial_worker crypto_del_alg
padata_put_pd_cnt // sub refcnt
padata_free_shell
padata_put_pd(ps->pd);
// pd is freed
// loop again, but pd is freed
// call padata_find_next, UAF
}
In the padata_reorder function, when it loops in 'while', if the alg is
deleted, the refcnt may be decreased to 0 before entering
'padata_find_next', which leads to UAF.
As mentioned in [1], do_serial is supposed to be called with BHs disabled
and always happen under RCU protection, to address this issue, add
synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls
to finish.
[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/
[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/ |
| In the Linux kernel, the following vulnerability has been resolved:
padata: avoid UAF for reorder_work
Although the previous patch can avoid ps and ps UAF for _do_serial, it
can not avoid potential UAF issue for reorder_work. This issue can
happen just as below:
crypto_request crypto_request crypto_del_alg
padata_do_serial
...
padata_reorder
// processes all remaining
// requests then breaks
while (1) {
if (!padata)
break;
...
}
padata_do_serial
// new request added
list_add
// sees the new request
queue_work(reorder_work)
padata_reorder
queue_work_on(squeue->work)
...
<kworker context>
padata_serial_worker
// completes new request,
// no more outstanding
// requests
crypto_del_alg
// free pd
<kworker context>
invoke_padata_reorder
// UAF of pd
To avoid UAF for 'reorder_work', get 'pd' ref before put 'reorder_work'
into the 'serial_wq' and put 'pd' ref until the 'serial_wq' finish. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix oops due to unset link speed
It isn't guaranteed that NETWORK_INTERFACE_INFO::LinkSpeed will always
be set by the server, so the client must handle any values and then
prevent oopses like below from happening:
Oops: divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 1323 Comm: cat Not tainted 6.13.0-rc7 #2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41
04/01/2014
RIP: 0010:cifs_debug_data_proc_show+0xa45/0x1460 [cifs] Code: 00 00 48
89 df e8 3b cd 1b c1 41 f6 44 24 2c 04 0f 84 50 01 00 00 48 89 ef e8
e7 d0 1b c1 49 8b 44 24 18 31 d2 49 8d 7c 24 28 <48> f7 74 24 18 48 89
c3 e8 6e cf 1b c1 41 8b 6c 24 28 49 8d 7c 24
RSP: 0018:ffffc90001817be0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88811230022c RCX: ffffffffc041bd99
RDX: 0000000000000000 RSI: 0000000000000567 RDI: ffff888112300228
RBP: ffff888112300218 R08: fffff52000302f5f R09: ffffed1022fa58ac
R10: ffff888117d2c566 R11: 00000000fffffffe R12: ffff888112300200
R13: 000000012a15343f R14: 0000000000000001 R15: ffff888113f2db58
FS: 00007fe27119e740(0000) GS:ffff888148600000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe2633c5000 CR3: 0000000124da0000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die_body.cold+0x19/0x27
? die+0x2e/0x50
? do_trap+0x159/0x1b0
? cifs_debug_data_proc_show+0xa45/0x1460 [cifs]
? do_error_trap+0x90/0x130
? cifs_debug_data_proc_show+0xa45/0x1460 [cifs]
? exc_divide_error+0x39/0x50
? cifs_debug_data_proc_show+0xa45/0x1460 [cifs]
? asm_exc_divide_error+0x1a/0x20
? cifs_debug_data_proc_show+0xa39/0x1460 [cifs]
? cifs_debug_data_proc_show+0xa45/0x1460 [cifs]
? seq_read_iter+0x42e/0x790
seq_read_iter+0x19a/0x790
proc_reg_read_iter+0xbe/0x110
? __pfx_proc_reg_read_iter+0x10/0x10
vfs_read+0x469/0x570
? do_user_addr_fault+0x398/0x760
? __pfx_vfs_read+0x10/0x10
? find_held_lock+0x8a/0xa0
? __pfx_lock_release+0x10/0x10
ksys_read+0xd3/0x170
? __pfx_ksys_read+0x10/0x10
? __rcu_read_unlock+0x50/0x270
? mark_held_locks+0x1a/0x90
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe271288911
Code: 00 48 8b 15 01 25 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8
20 ad 01 00 f3 0f 1e fa 80 3d b5 a7 10 00 00 74 13 31 c0 0f 05 <48> 3d
00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec
RSP: 002b:00007ffe87c079d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007fe271288911
RDX: 0000000000040000 RSI: 00007fe2633c6000 RDI: 0000000000000003
RBP: 00007ffe87c07a00 R08: 0000000000000000 R09: 00007fe2713e6380
R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000
R13: 00007fe2633c6000 R14: 0000000000000003 R15: 0000000000000000
</TASK>
Fix this by setting cifs_server_iface::speed to a sane value (1Gbps)
by default when link speed is unset. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd/iova_bitmap: Fix shift-out-of-bounds in iova_bitmap_offset_to_index()
Resolve a UBSAN shift-out-of-bounds issue in iova_bitmap_offset_to_index()
where shifting the constant "1" (of type int) by bitmap->mapped.pgshift
(an unsigned long value) could result in undefined behavior.
The constant "1" defaults to a 32-bit "int", and when "pgshift" exceeds
31 (e.g., pgshift = 63) the shift operation overflows, as the result
cannot be represented in a 32-bit type.
To resolve this, the constant is updated to "1UL", promoting it to an
unsigned long type to match the operand's type. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: do not force clear folio if buffer is referenced
Patch series "nilfs2: protect busy buffer heads from being force-cleared".
This series fixes the buffer head state inconsistency issues reported by
syzbot that occurs when the filesystem is corrupted and falls back to
read-only, and the associated buffer head use-after-free issue.
This patch (of 2):
Syzbot has reported that after nilfs2 detects filesystem corruption and
falls back to read-only, inconsistencies in the buffer state may occur.
One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty()
to set a data or metadata buffer as dirty, but it detects that the buffer
is not in the uptodate state:
WARNING: CPU: 0 PID: 6049 at fs/buffer.c:1177 mark_buffer_dirty+0x2e5/0x520
fs/buffer.c:1177
...
Call Trace:
<TASK>
nilfs_palloc_commit_alloc_entry+0x4b/0x160 fs/nilfs2/alloc.c:598
nilfs_ifile_create_inode+0x1dd/0x3a0 fs/nilfs2/ifile.c:73
nilfs_new_inode+0x254/0x830 fs/nilfs2/inode.c:344
nilfs_mkdir+0x10d/0x340 fs/nilfs2/namei.c:218
vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
do_mkdirat+0x264/0x3a0 fs/namei.c:4280
__do_sys_mkdirat fs/namei.c:4295 [inline]
__se_sys_mkdirat fs/namei.c:4293 [inline]
__x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The other is when nilfs_btree_propagate(), which propagates the dirty
state to the ancestor nodes of a b-tree that point to a dirty buffer,
detects that the origin buffer is not dirty, even though it should be:
WARNING: CPU: 0 PID: 5245 at fs/nilfs2/btree.c:2089
nilfs_btree_propagate+0xc79/0xdf0 fs/nilfs2/btree.c:2089
...
Call Trace:
<TASK>
nilfs_bmap_propagate+0x75/0x120 fs/nilfs2/bmap.c:345
nilfs_collect_file_data+0x4d/0xd0 fs/nilfs2/segment.c:587
nilfs_segctor_apply_buffers+0x184/0x340 fs/nilfs2/segment.c:1006
nilfs_segctor_scan_file+0x28c/0xa50 fs/nilfs2/segment.c:1045
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1216 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1540 [inline]
nilfs_segctor_do_construct+0x1c28/0x6b90 fs/nilfs2/segment.c:2115
nilfs_segctor_construct+0x181/0x6b0 fs/nilfs2/segment.c:2479
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2587 [inline]
nilfs_segctor_thread+0x69e/0xe80 fs/nilfs2/segment.c:2701
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Both of these issues are caused by the callbacks that handle the
page/folio write requests, forcibly clear various states, including the
working state of the buffers they hold, at unexpected times when they
detect read-only fallback.
Fix these issues by checking if the buffer is referenced before clearing
the page/folio state, and skipping the clear if it is. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: handle errors that nilfs_prepare_chunk() may return
Patch series "nilfs2: fix issues with rename operations".
This series fixes BUG_ON check failures reported by syzbot around rename
operations, and a minor behavioral issue where the mtime of a child
directory changes when it is renamed instead of moved.
This patch (of 2):
The directory manipulation routines nilfs_set_link() and
nilfs_delete_entry() rewrite the directory entry in the folio/page
previously read by nilfs_find_entry(), so error handling is omitted on the
assumption that nilfs_prepare_chunk(), which prepares the buffer for
rewriting, will always succeed for these. And if an error is returned, it
triggers the legacy BUG_ON() checks in each routine.
This assumption is wrong, as proven by syzbot: the buffer layer called by
nilfs_prepare_chunk() may call nilfs_get_block() if necessary, which may
fail due to metadata corruption or other reasons. This has been there all
along, but improved sanity checks and error handling may have made it more
reproducible in fuzzing tests.
Fix this issue by adding missing error paths in nilfs_set_link(),
nilfs_delete_entry(), and their caller nilfs_rename(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipmr: do not call mr_mfc_uses_dev() for unres entries
syzbot found that calling mr_mfc_uses_dev() for unres entries
would crash [1], because c->mfc_un.res.minvif / c->mfc_un.res.maxvif
alias to "struct sk_buff_head unresolved", which contain two pointers.
This code never worked, lets remove it.
[1]
Unable to handle kernel paging request at virtual address ffff5fff2d536613
KASAN: maybe wild-memory-access in range [0xfffefff96a9b3098-0xfffefff96a9b309f]
Modules linked in:
CPU: 1 UID: 0 PID: 7321 Comm: syz.0.16 Not tainted 6.13.0-rc7-syzkaller-g1950a0af2d55 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline]
pc : mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334
lr : mr_mfc_uses_dev net/ipv4/ipmr_base.c:289 [inline]
lr : mr_table_dump+0x694/0x8b0 net/ipv4/ipmr_base.c:334
Call trace:
mr_mfc_uses_dev net/ipv4/ipmr_base.c:290 [inline] (P)
mr_table_dump+0x5a4/0x8b0 net/ipv4/ipmr_base.c:334 (P)
mr_rtm_dumproute+0x254/0x454 net/ipv4/ipmr_base.c:382
ipmr_rtm_dumproute+0x248/0x4b4 net/ipv4/ipmr.c:2648
rtnl_dump_all+0x2e4/0x4e8 net/core/rtnetlink.c:4327
rtnl_dumpit+0x98/0x1d0 net/core/rtnetlink.c:6791
netlink_dump+0x4f0/0xbc0 net/netlink/af_netlink.c:2317
netlink_recvmsg+0x56c/0xe64 net/netlink/af_netlink.c:1973
sock_recvmsg_nosec net/socket.c:1033 [inline]
sock_recvmsg net/socket.c:1055 [inline]
sock_read_iter+0x2d8/0x40c net/socket.c:1125
new_sync_read fs/read_write.c:484 [inline]
vfs_read+0x740/0x970 fs/read_write.c:565
ksys_read+0x15c/0x26c fs/read_write.c:708 |
| In the Linux kernel, the following vulnerability has been resolved:
net: rose: fix timer races against user threads
Rose timers only acquire the socket spinlock, without
checking if the socket is owned by one user thread.
Add a check and rearm the timers if needed.
BUG: KASAN: slab-use-after-free in rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174
Read of size 2 at addr ffff88802f09b82a by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x169/0x550 mm/kasan/report.c:489
kasan_report+0x143/0x180 mm/kasan/report.c:602
rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174
call_timer_fn+0x187/0x650 kernel/time/timer.c:1793
expire_timers kernel/time/timer.c:1844 [inline]
__run_timers kernel/time/timer.c:2418 [inline]
__run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2430
run_timer_base kernel/time/timer.c:2439 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2449
handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xf7/0x220 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1049
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: Fix uninit-value in vxlan_vnifilter_dump()
KMSAN reported an uninit-value access in vxlan_vnifilter_dump() [1].
If the length of the netlink message payload is less than
sizeof(struct tunnel_msg), vxlan_vnifilter_dump() accesses bytes
beyond the message. This can lead to uninit-value access. Fix this by
returning an error in such situations.
[1]
BUG: KMSAN: uninit-value in vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422
vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422
rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6786
netlink_dump+0x93e/0x15f0 net/netlink/af_netlink.c:2317
__netlink_dump_start+0x716/0xd60 net/netlink/af_netlink.c:2432
netlink_dump_start include/linux/netlink.h:340 [inline]
rtnetlink_dump_start net/core/rtnetlink.c:6815 [inline]
rtnetlink_rcv_msg+0x1256/0x14a0 net/core/rtnetlink.c:6882
netlink_rcv_skb+0x467/0x660 net/netlink/af_netlink.c:2542
rtnetlink_rcv+0x35/0x40 net/core/rtnetlink.c:6944
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0xed6/0x1290 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x1092/0x1230 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:726
____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583
___sys_sendmsg+0x271/0x3b0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672
x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4110 [inline]
slab_alloc_node mm/slub.c:4153 [inline]
kmem_cache_alloc_node_noprof+0x800/0xe80 mm/slub.c:4205
kmalloc_reserve+0x13b/0x4b0 net/core/skbuff.c:587
__alloc_skb+0x347/0x7d0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1323 [inline]
netlink_alloc_large_skb+0xa5/0x280 net/netlink/af_netlink.c:1196
netlink_sendmsg+0xac9/0x1230 net/netlink/af_netlink.c:1866
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:726
____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583
___sys_sendmsg+0x271/0x3b0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672
x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 30991 Comm: syz.4.10630 Not tainted 6.12.0-10694-gc44daa7e3c73 #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
net: davicom: fix UAF in dm9000_drv_remove
dm is netdev private data and it cannot be
used after free_netdev() call. Using dm after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
This is similar to the issue fixed in commit
ad297cd2db89 ("net: qcom/emac: fix UAF in emac_remove").
This bug is detected by our static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime
After commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into struct
md_bitmap_stats"), following panic is reported:
Oops: general protection fault, probably for non-canonical address
RIP: 0010:bitmap_get_stats+0x2b/0xa0
Call Trace:
<TASK>
md_seq_show+0x2d2/0x5b0
seq_read_iter+0x2b9/0x470
seq_read+0x12f/0x180
proc_reg_read+0x57/0xb0
vfs_read+0xf6/0x380
ksys_read+0x6c/0xf0
do_syscall_64+0x82/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Root cause is that bitmap_get_stats() can be called at anytime if mddev
is still there, even if bitmap is destroyed, or not fully initialized.
Deferenceing bitmap in this case can crash the kernel. Meanwhile, the
above commit start to deferencing bitmap->storage, make the problem
easier to trigger.
Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rose: prevent integer overflows in rose_setsockopt()
In case of possible unpredictably large arguments passed to
rose_setsockopt() and multiplied by extra values on top of that,
integer overflows may occur.
Do the safest minimum and fix these issues by checking the
contents of 'opt' and returning -EINVAL if they are too large. Also,
switch to unsigned int and remove useless check for negative 'opt'
in ROSE_IDLE case. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: rtl8150: enable basic endpoint checking
Syzkaller reports [1] encountering a common issue of utilizing a wrong
usb endpoint type during URB submitting stage. This, in turn, triggers
a warning shown below.
For now, enable simple endpoint checking (specifically, bulk and
interrupt eps, testing control one is not essential) to mitigate
the issue with a view to do other related cosmetic changes later,
if they are necessary.
[1] Syzkaller report:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 driv>
Modules linked in:
CPU: 1 UID: 0 PID: 2586 Comm: dhcpcd Not tainted 6.11.0-rc4-syzkaller-00069-gfc88bb11617>
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Code: 84 3c 02 00 00 e8 05 e4 fc fc 4c 89 ef e8 fd 25 d7 fe 45 89 e0 89 e9 4c 89 f2 48 8>
RSP: 0018:ffffc9000441f740 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff888112487a00 RCX: ffffffff811a99a9
RDX: ffff88810df6ba80 RSI: ffffffff811a99b6 RDI: 0000000000000001
RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffff8881023bf0a8 R14: ffff888112452a20 R15: ffff888112487a7c
FS: 00007fc04eea5740(0000) GS:ffff8881f6300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0a1de9f870 CR3: 000000010dbd0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
rtl8150_open+0x300/0xe30 drivers/net/usb/rtl8150.c:733
__dev_open+0x2d4/0x4e0 net/core/dev.c:1474
__dev_change_flags+0x561/0x720 net/core/dev.c:8838
dev_change_flags+0x8f/0x160 net/core/dev.c:8910
devinet_ioctl+0x127a/0x1f10 net/ipv4/devinet.c:1177
inet_ioctl+0x3aa/0x3f0 net/ipv4/af_inet.c:1003
sock_do_ioctl+0x116/0x280 net/socket.c:1222
sock_ioctl+0x22e/0x6c0 net/socket.c:1341
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x193/0x220 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc04ef73d49
...
This change has not been tested on real hardware. |
