| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Fix the page details for the srq created by kernel consumers
While using nvme target with use_srq on, below kernel panic is noticed.
[ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514)
[ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI
..
[ 566.393799] <TASK>
[ 566.393807] ? __die_body+0x1a/0x60
[ 566.393823] ? die+0x38/0x60
[ 566.393835] ? do_trap+0xe4/0x110
[ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393881] ? do_error_trap+0x7c/0x120
[ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393911] ? exc_divide_error+0x34/0x50
[ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393939] ? asm_exc_divide_error+0x16/0x20
[ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re]
[ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re]
[ 566.394057] ? srso_return_thunk+0x5/0x5f
[ 566.394068] ? __init_swait_queue_head+0x4a/0x60
[ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core]
[ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma]
[ 566.394174] ? lock_release+0x22c/0x3f0
[ 566.394187] ? srso_return_thunk+0x5/0x5f
Page size and shift info is set only for the user space SRQs.
Set page size and page shift for kernel space SRQs also. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix checksums set in idpf_rx_rsc()
idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header
is not set yet.
This triggers the following warning for CONFIG_DEBUG_NET=y builds.
DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb))
[ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth
[ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697
[ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748)
[ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261687] ? report_bug (lib/bug.c:?)
[ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285)
[ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309)
[ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621)
[ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf
[ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf
[ 69.261712] __napi_poll (net/core/dev.c:7194)
[ 69.261716] net_rx_action (net/core/dev.c:7265)
[ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293)
[ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288)
[ 69.261726] handle_softirqs (kernel/softirq.c:561) |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix deinitializing VF in error path
If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees
all VFs without removing them from snapshot PF-VF mailbox list, leading
to list corruption.
Reproducer:
devlink dev eswitch set $PF1_PCI mode switchdev
ip l s $PF1 up
ip l s $PF1 promisc on
sleep 1
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
sleep 1
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
Trace (minimized):
list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330).
kernel BUG at lib/list_debug.c:29!
RIP: 0010:__list_add_valid_or_report+0xa6/0x100
ice_mbx_init_vf_info+0xa7/0x180 [ice]
ice_initialize_vf_entry+0x1fa/0x250 [ice]
ice_sriov_configure+0x8d7/0x1520 [ice]
? __percpu_ref_switch_mode+0x1b1/0x5d0
? __pfx_ice_sriov_configure+0x10/0x10 [ice]
Sometimes a KASAN report can be seen instead with a similar stack trace:
BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100
VFs are added to this list in ice_mbx_init_vf_info(), but only removed
in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is
also being called in other places where VFs are being removed (including
ice_free_vfs() itself). |
| In the Linux kernel, the following vulnerability has been resolved:
net: better track kernel sockets lifetime
While kernel sockets are dismantled during pernet_operations->exit(),
their freeing can be delayed by any tx packets still held in qdisc
or device queues, due to skb_set_owner_w() prior calls.
This then trigger the following warning from ref_tracker_dir_exit() [1]
To fix this, make sure that kernel sockets own a reference on net->passive.
Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket
is converted to a refcounted one.
[1]
[ 136.263918][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at
[ 136.263918][ T35] sk_alloc+0x2b3/0x370
[ 136.263918][ T35] inet6_create+0x6ce/0x10f0
[ 136.263918][ T35] __sock_create+0x4c0/0xa30
[ 136.263918][ T35] inet_ctl_sock_create+0xc2/0x250
[ 136.263918][ T35] igmp6_net_init+0x39/0x390
[ 136.263918][ T35] ops_init+0x31e/0x590
[ 136.263918][ T35] setup_net+0x287/0x9e0
[ 136.263918][ T35] copy_net_ns+0x33f/0x570
[ 136.263918][ T35] create_new_namespaces+0x425/0x7b0
[ 136.263918][ T35] unshare_nsproxy_namespaces+0x124/0x180
[ 136.263918][ T35] ksys_unshare+0x57d/0xa70
[ 136.263918][ T35] __x64_sys_unshare+0x38/0x40
[ 136.263918][ T35] do_syscall_64+0xf3/0x230
[ 136.263918][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 136.263918][ T35]
[ 136.343488][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at
[ 136.343488][ T35] sk_alloc+0x2b3/0x370
[ 136.343488][ T35] inet6_create+0x6ce/0x10f0
[ 136.343488][ T35] __sock_create+0x4c0/0xa30
[ 136.343488][ T35] inet_ctl_sock_create+0xc2/0x250
[ 136.343488][ T35] ndisc_net_init+0xa7/0x2b0
[ 136.343488][ T35] ops_init+0x31e/0x590
[ 136.343488][ T35] setup_net+0x287/0x9e0
[ 136.343488][ T35] copy_net_ns+0x33f/0x570
[ 136.343488][ T35] create_new_namespaces+0x425/0x7b0
[ 136.343488][ T35] unshare_nsproxy_namespaces+0x124/0x180
[ 136.343488][ T35] ksys_unshare+0x57d/0xa70
[ 136.343488][ T35] __x64_sys_unshare+0x38/0x40
[ 136.343488][ T35] do_syscall_64+0xf3/0x230
[ 136.343488][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
net: fec: Use page_pool_put_full_page when freeing rx buffers
The page_pool_release_page was used when freeing rx buffers, and this
function just unmaps the page (if mapped) and does not recycle the page.
So after hundreds of down/up the eth0, the system will out of memory.
For more details, please refer to the following reproduce steps and
bug logs. To solve this issue and refer to the doc of page pool, the
page_pool_put_full_page should be used to replace page_pool_release_page.
Because this API will try to recycle the page if the page refcnt equal to
1. After testing 20000 times, the issue can not be reproduced anymore
(about testing 391 times the issue will occur on i.MX8MN-EVK before).
Reproduce steps:
Create the test script and run the script. The script content is as
follows:
LOOPS=20000
i=1
while [ $i -le $LOOPS ]
do
echo "TINFO:ENET $curface up and down test $i times"
org_macaddr=$(cat /sys/class/net/eth0/address)
ifconfig eth0 down
ifconfig eth0 hw ether $org_macaddr up
i=$(expr $i + 1)
done
sleep 5
if cat /sys/class/net/eth0/operstate | grep 'up';then
echo "TEST PASS"
else
echo "TEST FAIL"
fi
Bug detail logs:
TINFO:ENET up and down test 391 times
[ 850.471205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
[ 853.535318] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 853.541694] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 870.590531] page_pool_release_retry() stalled pool shutdown 199 inflight 60 sec
[ 931.006557] page_pool_release_retry() stalled pool shutdown 199 inflight 120 sec
TINFO:ENET up and down test 392 times
[ 991.426544] page_pool_release_retry() stalled pool shutdown 192 inflight 181 sec
[ 1051.838531] page_pool_release_retry() stalled pool shutdown 170 inflight 241 sec
[ 1093.751217] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
[ 1096.446520] page_pool_release_retry() stalled pool shutdown 308 inflight 60 sec
[ 1096.831245] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1096.839092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1112.254526] page_pool_release_retry() stalled pool shutdown 103 inflight 302 sec
[ 1156.862533] page_pool_release_retry() stalled pool shutdown 308 inflight 120 sec
[ 1172.674516] page_pool_release_retry() stalled pool shutdown 103 inflight 362 sec
[ 1217.278532] page_pool_release_retry() stalled pool shutdown 308 inflight 181 sec
TINFO:ENET up and down test 393 times
[ 1233.086535] page_pool_release_retry() stalled pool shutdown 103 inflight 422 sec
[ 1277.698513] page_pool_release_retry() stalled pool shutdown 308 inflight 241 sec
[ 1293.502525] page_pool_release_retry() stalled pool shutdown 86 inflight 483 sec
[ 1338.110518] page_pool_release_retry() stalled pool shutdown 308 inflight 302 sec
[ 1353.918540] page_pool_release_retry() stalled pool shutdown 32 inflight 543 sec
[ 1361.179205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
[ 1364.255298] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1364.263189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1371.998532] page_pool_release_retry() stalled pool shutdown 310 inflight 60 sec
[ 1398.530542] page_pool_release_retry() stalled pool shutdown 308 inflight 362 sec
[ 1414.334539] page_pool_release_retry() stalled pool shutdown 16 inflight 604 sec
[ 1432.414520] page_pool_release_retry() stalled pool shutdown 310 inflight 120 sec
[ 1458.942523] page_pool_release_retry() stalled pool shutdown 308 inflight 422 sec
[ 1474.750521] page_pool_release_retry() stalled pool shutdown 16 inflight 664 sec
TINFO:ENET up and down test 394 times
[ 1492.8305
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, fix definer's HWS_SET32 macro for negative offset
When bit offset for HWS_SET32 macro is negative,
UBSAN complains about the shift-out-of-bounds:
UBSAN: shift-out-of-bounds in
drivers/net/ethernet/mellanox/mlx5/core/steering/hws/definer.c:177:2
shift exponent -8 is negative |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: make __free(kfree) accept error pointers
Currently, if an automatically freed allocation is an error pointer that
will lead to a crash. An example of this is in wm831x_gpio_dbg_show().
171 char *label __free(kfree) = gpiochip_dup_line_label(chip, i);
172 if (IS_ERR(label)) {
173 dev_err(wm831x->dev, "Failed to duplicate label\n");
174 continue;
175 }
The auto clean up function should check for error pointers as well,
otherwise we're going to keep hitting issues like this. |
| In the Linux kernel, the following vulnerability has been resolved:
fsdax: Fix infinite loop in dax_iomap_rw()
I got an infinite loop and a WARNING report when executing a tail command
in virtiofs.
WARNING: CPU: 10 PID: 964 at fs/iomap/iter.c:34 iomap_iter+0x3a2/0x3d0
Modules linked in:
CPU: 10 PID: 964 Comm: tail Not tainted 5.19.0-rc7
Call Trace:
<TASK>
dax_iomap_rw+0xea/0x620
? __this_cpu_preempt_check+0x13/0x20
fuse_dax_read_iter+0x47/0x80
fuse_file_read_iter+0xae/0xd0
new_sync_read+0xfe/0x180
? 0xffffffff81000000
vfs_read+0x14d/0x1a0
ksys_read+0x6d/0xf0
__x64_sys_read+0x1a/0x20
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The tail command will call read() with a count of 0. In this case,
iomap_iter() will report this WARNING, and always return 1 which casuing
the infinite loop in dax_iomap_rw().
Fixing by checking count whether is 0 in dax_iomap_rw(). |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu-tasks: Avoid pr_info() with spin lock in cblist_init_generic()
pr_info() is called with rtp->cbs_gbl_lock spin lock locked. Because
pr_info() calls printk() that might sleep, this will result in BUG
like below:
[ 0.206455] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.206463]
[ 0.206464] =============================
[ 0.206464] [ BUG: Invalid wait context ]
[ 0.206465] 5.19.0-00428-g9de1f9c8ca51 #5 Not tainted
[ 0.206466] -----------------------------
[ 0.206466] swapper/0/1 is trying to lock:
[ 0.206467] ffffffffa0167a58 (&port_lock_key){....}-{3:3}, at: serial8250_console_write+0x327/0x4a0
[ 0.206473] other info that might help us debug this:
[ 0.206473] context-{5:5}
[ 0.206474] 3 locks held by swapper/0/1:
[ 0.206474] #0: ffffffff9eb597e0 (rcu_tasks.cbs_gbl_lock){....}-{2:2}, at: cblist_init_generic.constprop.0+0x14/0x1f0
[ 0.206478] #1: ffffffff9eb579c0 (console_lock){+.+.}-{0:0}, at: _printk+0x63/0x7e
[ 0.206482] #2: ffffffff9ea77780 (console_owner){....}-{0:0}, at: console_emit_next_record.constprop.0+0x111/0x330
[ 0.206485] stack backtrace:
[ 0.206486] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-00428-g9de1f9c8ca51 #5
[ 0.206488] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[ 0.206489] Call Trace:
[ 0.206490] <TASK>
[ 0.206491] dump_stack_lvl+0x6a/0x9f
[ 0.206493] __lock_acquire.cold+0x2d7/0x2fe
[ 0.206496] ? stack_trace_save+0x46/0x70
[ 0.206497] lock_acquire+0xd1/0x2f0
[ 0.206499] ? serial8250_console_write+0x327/0x4a0
[ 0.206500] ? __lock_acquire+0x5c7/0x2720
[ 0.206502] _raw_spin_lock_irqsave+0x3d/0x90
[ 0.206504] ? serial8250_console_write+0x327/0x4a0
[ 0.206506] serial8250_console_write+0x327/0x4a0
[ 0.206508] console_emit_next_record.constprop.0+0x180/0x330
[ 0.206511] console_unlock+0xf7/0x1f0
[ 0.206512] vprintk_emit+0xf7/0x330
[ 0.206514] _printk+0x63/0x7e
[ 0.206516] cblist_init_generic.constprop.0.cold+0x24/0x32
[ 0.206518] rcu_init_tasks_generic+0x5/0xd9
[ 0.206522] kernel_init_freeable+0x15b/0x2a2
[ 0.206523] ? rest_init+0x160/0x160
[ 0.206526] kernel_init+0x11/0x120
[ 0.206527] ret_from_fork+0x1f/0x30
[ 0.206530] </TASK>
[ 0.207018] cblist_init_generic: Setting shift to 1 and lim to 1.
This patch moves pr_info() so that it is called without
rtp->cbs_gbl_lock locked. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix call trace observed during I/O with CMF enabled
The following was seen with CMF enabled:
BUG: using smp_processor_id() in preemptible
code: systemd-udevd/31711
kernel: caller is lpfc_update_cmf_cmd+0x214/0x420 [lpfc]
kernel: CPU: 12 PID: 31711 Comm: systemd-udevd
kernel: Call Trace:
kernel: <TASK>
kernel: dump_stack_lvl+0x44/0x57
kernel: check_preemption_disabled+0xbf/0xe0
kernel: lpfc_update_cmf_cmd+0x214/0x420 [lpfc]
kernel: lpfc_nvme_fcp_io_submit+0x23b4/0x4df0 [lpfc]
this_cpu_ptr() calls smp_processor_id() in a preemptible context.
Fix by using per_cpu_ptr() with raw_smp_processor_id() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: fix io hung while disconnecting device
In our tests, "qemu-nbd" triggers a io hung:
INFO: task qemu-nbd:11445 blocked for more than 368 seconds.
Not tainted 5.18.0-rc3-next-20220422-00003-g2176915513ca #884
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:qemu-nbd state:D stack: 0 pid:11445 ppid: 1 flags:0x00000000
Call Trace:
<TASK>
__schedule+0x480/0x1050
? _raw_spin_lock_irqsave+0x3e/0xb0
schedule+0x9c/0x1b0
blk_mq_freeze_queue_wait+0x9d/0xf0
? ipi_rseq+0x70/0x70
blk_mq_freeze_queue+0x2b/0x40
nbd_add_socket+0x6b/0x270 [nbd]
nbd_ioctl+0x383/0x510 [nbd]
blkdev_ioctl+0x18e/0x3e0
__x64_sys_ioctl+0xac/0x120
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fd8ff706577
RSP: 002b:00007fd8fcdfebf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000040000000 RCX: 00007fd8ff706577
RDX: 000000000000000d RSI: 000000000000ab00 RDI: 000000000000000f
RBP: 000000000000000f R08: 000000000000fbe8 R09: 000055fe497c62b0
R10: 00000002aff20000 R11: 0000000000000246 R12: 000000000000006d
R13: 0000000000000000 R14: 00007ffe82dc5e70 R15: 00007fd8fcdff9c0
"qemu-ndb -d" will call ioctl 'NBD_DISCONNECT' first, however, following
message was found:
block nbd0: Send disconnect failed -32
Which indicate that something is wrong with the server. Then,
"qemu-nbd -d" will call ioctl 'NBD_CLEAR_SOCK', however ioctl can't clear
requests after commit 2516ab1543fd("nbd: only clear the queue on device
teardown"). And in the meantime, request can't complete through timeout
because nbd_xmit_timeout() will always return 'BLK_EH_RESET_TIMER', which
means such request will never be completed in this situation.
Now that the flag 'NBD_CMD_INFLIGHT' can make sure requests won't
complete multiple times, switch back to call nbd_clear_sock() in
nbd_clear_sock_ioctl(), so that inflight requests can be cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: call genl_unregister_family() first in nbd_cleanup()
Otherwise there may be race between module removal and the handling of
netlink command, which can lead to the oops as shown below:
BUG: kernel NULL pointer dereference, address: 0000000000000098
Oops: 0002 [#1] SMP PTI
CPU: 1 PID: 31299 Comm: nbd-client Tainted: G E 5.14.0-rc4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:down_write+0x1a/0x50
Call Trace:
start_creating+0x89/0x130
debugfs_create_dir+0x1b/0x130
nbd_start_device+0x13d/0x390 [nbd]
nbd_genl_connect+0x42f/0x748 [nbd]
genl_family_rcv_msg_doit.isra.0+0xec/0x150
genl_rcv_msg+0xe5/0x1e0
netlink_rcv_skb+0x55/0x100
genl_rcv+0x29/0x40
netlink_unicast+0x1a8/0x250
netlink_sendmsg+0x21b/0x430
____sys_sendmsg+0x2a4/0x2d0
___sys_sendmsg+0x81/0xc0
__sys_sendmsg+0x62/0xb0
__x64_sys_sendmsg+0x1f/0x30
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Modules linked in: nbd(E-) |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: prevent bad output lengths in smb2_ioctl_query_info()
When calling smb2_ioctl_query_info() with
smb_query_info::flags=PASSTHRU_FSCTL and
smb_query_info::output_buffer_length=0, the following would return
0x10
buffer = memdup_user(arg + sizeof(struct smb_query_info),
qi.output_buffer_length);
if (IS_ERR(buffer)) {
kfree(vars);
return PTR_ERR(buffer);
}
rather than a valid pointer thus making IS_ERR() check fail. This
would then cause a NULL ptr deference in @buffer when accessing it
later in smb2_ioctl_query_ioctl(). While at it, prevent having a
@buffer smaller than 8 bytes to correctly handle SMB2_SET_INFO
FileEndOfFileInformation requests when
smb_query_info::flags=PASSTHRU_SET_INFO.
Here is a small C reproducer which triggers a NULL ptr in @buffer when
passing an invalid smb_query_info::flags
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#define die(s) perror(s), exit(1)
#define QUERY_INFO 0xc018cf07
int main(int argc, char *argv[])
{
int fd;
if (argc < 2)
exit(1);
fd = open(argv[1], O_RDONLY);
if (fd == -1)
die("open");
if (ioctl(fd, QUERY_INFO, (uint32_t[]) { 0, 0, 0, 4, 0, 0}) == -1)
die("ioctl");
close(fd);
return 0;
}
mount.cifs //srv/share /mnt -o ...
gcc repro.c && ./a.out /mnt/f0
[ 114.138620] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 114.139310] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 114.139775] CPU: 2 PID: 995 Comm: a.out Not tainted 5.17.0-rc8 #1
[ 114.140148] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 114.140818] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs]
[ 114.141221] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24
[ 114.142348] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256
[ 114.142692] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d
[ 114.143119] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380
[ 114.143544] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003
[ 114.143983] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288
[ 114.144424] R13: 00000000ffffffea R14: ffff888115503228 R15: 0000000000000000
[ 114.144852] FS: 00007f7aeabdf740(0000) GS:ffff888151600000(0000) knlGS:0000000000000000
[ 114.145338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 114.145692] CR2: 00007f7aeacfdf5e CR3: 000000012000e000 CR4: 0000000000350ee0
[ 114.146131] Call Trace:
[ 114.146291] <TASK>
[ 114.146432] ? smb2_query_reparse_tag+0x890/0x890 [cifs]
[ 114.146800] ? cifs_mapchar+0x460/0x460 [cifs]
[ 114.147121] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.147412] ? cifs_strndup_to_utf16+0x15b/0x250 [cifs]
[ 114.147775] ? dentry_path_raw+0xa6/0xf0
[ 114.148024] ? cifs_convert_path_to_utf16+0x198/0x220 [cifs]
[ 114.148413] ? smb2_check_message+0x1080/0x1080 [cifs]
[ 114.148766] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.149065] cifs_ioctl+0x1577/0x3320 [cifs]
[ 114.149371] ? lock_downgrade+0x6f0/0x6f0
[ 114.149631] ? cifs_readdir+0x2e60/0x2e60 [cifs]
[ 114.149956] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.150250] ? __rseq_handle_notify_resume+0x80b/0xbe0
[ 114.150562] ? __up_read+0x192/0x710
[ 114.150791] ? __ia32_sys_rseq+0xf0/0xf0
[ 114.151025] ? __x64_sys_openat+0x11f/0x1d0
[ 114.151296] __x64_sys_ioctl+0x127/0x190
[ 114.151549] do_syscall_64+0x3b/0x90
[ 114.151768] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 114.152079] RIP: 0033:0x7f7aead043df
[ 114.152306] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: s5p_cec: limit msg.len to CEC_MAX_MSG_SIZE
I expect that the hardware will have limited this to 16, but just in
case it hasn't, check for this corner case. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ast: astdp: Fix timeout for enabling video signal
The ASTDP transmitter sometimes takes up to 1 second for enabling the
video signal, while the timeout is only 200 msec. This results in a
kernel error message. Increase the timeout to 1 second. An example
of the error message is shown below.
[ 697.084433] ------------[ cut here ]------------
[ 697.091115] ast 0000:02:00.0: [drm] drm_WARN_ON(!__ast_dp_wait_enable(ast, enabled))
[ 697.091233] WARNING: CPU: 1 PID: 160 at drivers/gpu/drm/ast/ast_dp.c:232 ast_dp_set_enable+0x123/0x140 [ast]
[...]
[ 697.272469] RIP: 0010:ast_dp_set_enable+0x123/0x140 [ast]
[...]
[ 697.415283] Call Trace:
[ 697.420727] <TASK>
[ 697.425908] ? show_trace_log_lvl+0x196/0x2c0
[ 697.433304] ? show_trace_log_lvl+0x196/0x2c0
[ 697.440693] ? drm_atomic_helper_commit_modeset_enables+0x30a/0x470
[ 697.450115] ? ast_dp_set_enable+0x123/0x140 [ast]
[ 697.458059] ? __warn.cold+0xaf/0xca
[ 697.464713] ? ast_dp_set_enable+0x123/0x140 [ast]
[ 697.472633] ? report_bug+0x134/0x1d0
[ 697.479544] ? handle_bug+0x58/0x90
[ 697.486127] ? exc_invalid_op+0x13/0x40
[ 697.492975] ? asm_exc_invalid_op+0x16/0x20
[ 697.500224] ? preempt_count_sub+0x14/0xc0
[ 697.507473] ? ast_dp_set_enable+0x123/0x140 [ast]
[ 697.515377] ? ast_dp_set_enable+0x123/0x140 [ast]
[ 697.523227] drm_atomic_helper_commit_modeset_enables+0x30a/0x470
[ 697.532388] drm_atomic_helper_commit_tail+0x58/0x90
[ 697.540400] ast_mode_config_helper_atomic_commit_tail+0x30/0x40 [ast]
[ 697.550009] commit_tail+0xfe/0x1d0
[ 697.556547] drm_atomic_helper_commit+0x198/0x1c0
This is a cosmetical problem. Enabling the video signal still works
even with the error message. The problem has always been present, but
only recent versions of the ast driver warn about missing the timeout. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't use btrfs_set_item_key_safe on RAID stripe-extents
Don't use btrfs_set_item_key_safe() to modify the keys in the RAID
stripe-tree, as this can lead to corruption of the tree, which is caught
by the checks in btrfs_set_item_key_safe():
BTRFS info (device nvme1n1): leaf 49168384 gen 15 total ptrs 194 free space 8329 owner 12
BTRFS info (device nvme1n1): refs 2 lock_owner 1030 current 1030
[ snip ]
item 105 key (354549760 230 20480) itemoff 14587 itemsize 16
stride 0 devid 5 physical 67502080
item 106 key (354631680 230 4096) itemoff 14571 itemsize 16
stride 0 devid 1 physical 88559616
item 107 key (354631680 230 32768) itemoff 14555 itemsize 16
stride 0 devid 1 physical 88555520
item 108 key (354717696 230 28672) itemoff 14539 itemsize 16
stride 0 devid 2 physical 67604480
[ snip ]
BTRFS critical (device nvme1n1): slot 106 key (354631680 230 32768) new key (354635776 230 4096)
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.c:2602!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 1 UID: 0 PID: 1055 Comm: fsstress Not tainted 6.13.0-rc1+ #1464
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
RIP: 0010:btrfs_set_item_key_safe+0xf7/0x270
Code: <snip>
RSP: 0018:ffffc90001337ab0 EFLAGS: 00010287
RAX: 0000000000000000 RBX: ffff8881115fd000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000001 RDI: 00000000ffffffff
RBP: ffff888110ed6f50 R08: 00000000ffffefff R09: ffffffff8244c500
R10: 00000000ffffefff R11: 00000000ffffffff R12: ffff888100586000
R13: 00000000000000c9 R14: ffffc90001337b1f R15: ffff888110f23b58
FS: 00007f7d75c72740(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa811652c60 CR3: 0000000111398001 CR4: 0000000000370eb0
Call Trace:
<TASK>
? __die_body.cold+0x14/0x1a
? die+0x2e/0x50
? do_trap+0xca/0x110
? do_error_trap+0x65/0x80
? btrfs_set_item_key_safe+0xf7/0x270
? exc_invalid_op+0x50/0x70
? btrfs_set_item_key_safe+0xf7/0x270
? asm_exc_invalid_op+0x1a/0x20
? btrfs_set_item_key_safe+0xf7/0x270
btrfs_partially_delete_raid_extent+0xc4/0xe0
btrfs_delete_raid_extent+0x227/0x240
__btrfs_free_extent.isra.0+0x57f/0x9c0
? exc_coproc_segment_overrun+0x40/0x40
__btrfs_run_delayed_refs+0x2fa/0xe80
btrfs_run_delayed_refs+0x81/0xe0
btrfs_commit_transaction+0x2dd/0xbe0
? preempt_count_add+0x52/0xb0
btrfs_sync_file+0x375/0x4c0
do_fsync+0x39/0x70
__x64_sys_fsync+0x13/0x20
do_syscall_64+0x54/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f7d7550ef90
Code: <snip>
RSP: 002b:00007ffd70237248 EFLAGS: 00000202 ORIG_RAX: 000000000000004a
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f7d7550ef90
RDX: 000000000000013a RSI: 000000000040eb28 RDI: 0000000000000004
RBP: 000000000000001b R08: 0000000000000078 R09: 00007ffd7023725c
R10: 00007f7d75400390 R11: 0000000000000202 R12: 028f5c28f5c28f5c
R13: 8f5c28f5c28f5c29 R14: 000000000040b520 R15: 00007f7d75c726c8
</TASK>
While the root cause of the tree order corruption isn't clear, using
btrfs_duplicate_item() to copy the item and then adjusting both the key
and the per-device physical addresses is a safe way to counter this
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix assertion failure when splitting ordered extent after transaction abort
If while we are doing a direct IO write a transaction abort happens, we
mark all existing ordered extents with the BTRFS_ORDERED_IOERR flag (done
at btrfs_destroy_ordered_extents()), and then after that if we enter
btrfs_split_ordered_extent() and the ordered extent has bytes left
(meaning we have a bio that doesn't cover the whole ordered extent, see
details at btrfs_extract_ordered_extent()), we will fail on the following
assertion at btrfs_split_ordered_extent():
ASSERT(!(flags & ~BTRFS_ORDERED_TYPE_FLAGS));
because the BTRFS_ORDERED_IOERR flag is set and the definition of
BTRFS_ORDERED_TYPE_FLAGS is just the union of all flags that identify the
type of write (regular, nocow, prealloc, compressed, direct IO, encoded).
Fix this by returning an error from btrfs_extract_ordered_extent() if we
find the BTRFS_ORDERED_IOERR flag in the ordered extent. The error will
be the error that resulted in the transaction abort or -EIO if no
transaction abort happened.
This was recently reported by syzbot with the following trace:
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
CPU: 0 UID: 0 PID: 5321 Comm: syz.0.0 Not tainted 6.13.0-rc5-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
fail_dump lib/fault-inject.c:53 [inline]
should_fail_ex+0x3b0/0x4e0 lib/fault-inject.c:154
should_failslab+0xac/0x100 mm/failslab.c:46
slab_pre_alloc_hook mm/slub.c:4072 [inline]
slab_alloc_node mm/slub.c:4148 [inline]
__do_kmalloc_node mm/slub.c:4297 [inline]
__kmalloc_noprof+0xdd/0x4c0 mm/slub.c:4310
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1037 [inline]
btrfs_chunk_alloc_add_chunk_item+0x244/0x1100 fs/btrfs/volumes.c:5742
reserve_chunk_space+0x1ca/0x2c0 fs/btrfs/block-group.c:4292
check_system_chunk fs/btrfs/block-group.c:4319 [inline]
do_chunk_alloc fs/btrfs/block-group.c:3891 [inline]
btrfs_chunk_alloc+0x77b/0xf80 fs/btrfs/block-group.c:4187
find_free_extent_update_loop fs/btrfs/extent-tree.c:4166 [inline]
find_free_extent+0x42d1/0x5810 fs/btrfs/extent-tree.c:4579
btrfs_reserve_extent+0x422/0x810 fs/btrfs/extent-tree.c:4672
btrfs_new_extent_direct fs/btrfs/direct-io.c:186 [inline]
btrfs_get_blocks_direct_write+0x706/0xfa0 fs/btrfs/direct-io.c:321
btrfs_dio_iomap_begin+0xbb7/0x1180 fs/btrfs/direct-io.c:525
iomap_iter+0x697/0xf60 fs/iomap/iter.c:90
__iomap_dio_rw+0xeb9/0x25b0 fs/iomap/direct-io.c:702
btrfs_dio_write fs/btrfs/direct-io.c:775 [inline]
btrfs_direct_write+0x610/0xa30 fs/btrfs/direct-io.c:880
btrfs_do_write_iter+0x2a0/0x760 fs/btrfs/file.c:1397
do_iter_readv_writev+0x600/0x880
vfs_writev+0x376/0xba0 fs/read_write.c:1050
do_pwritev fs/read_write.c:1146 [inline]
__do_sys_pwritev2 fs/read_write.c:1204 [inline]
__se_sys_pwritev2+0x196/0x2b0 fs/read_write.c:1195
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f1281f85d29
RSP: 002b:00007f12819fe038 EFLAGS: 00000246 ORIG_RAX: 0000000000000148
RAX: ffffffffffffffda RBX: 00007f1282176080 RCX: 00007f1281f85d29
RDX: 0000000000000001 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 00007f12819fe090 R08: 0000000000000000 R09: 0000000000000003
R10: 0000000000007000 R11: 0000000000000246 R12: 0000000000000002
R13: 0000000000000000 R14: 00007f1282176080 R15: 00007ffcb9e23328
</TASK>
BTRFS error (device loop0 state A): Transaction aborted (error -12)
BTRFS: error (device loop0 state A
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Fix resetting of tracepoints
If a timerlat tracer is started with the osnoise option OSNOISE_WORKLOAD
disabled, but then that option is enabled and timerlat is removed, the
tracepoints that were enabled on timerlat registration do not get
disabled. If the option is disabled again and timelat is started, then it
triggers a warning in the tracepoint code due to registering the
tracepoint again without ever disabling it.
Do not use the same user space defined options to know to disable the
tracepoints when timerlat is removed. Instead, set a global flag when it
is enabled and use that flag to know to disable the events.
~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo timerlat > /sys/kernel/tracing/current_tracer
~# echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo nop > /sys/kernel/tracing/current_tracer
~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo timerlat > /sys/kernel/tracing/current_tracer
Triggers:
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1337 at kernel/tracepoint.c:294 tracepoint_add_func+0x3b6/0x3f0
Modules linked in:
CPU: 6 UID: 0 PID: 1337 Comm: rtla Not tainted 6.13.0-rc4-test-00018-ga867c441128e-dirty #73
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:tracepoint_add_func+0x3b6/0x3f0
Code: 48 8b 53 28 48 8b 73 20 4c 89 04 24 e8 23 59 11 00 4c 8b 04 24 e9 36 fe ff ff 0f 0b b8 ea ff ff ff 45 84 e4 0f 84 68 fe ff ff <0f> 0b e9 61 fe ff ff 48 8b 7b 18 48 85 ff 0f 84 4f ff ff ff 49 8b
RSP: 0018:ffffb9b003a87ca0 EFLAGS: 00010202
RAX: 00000000ffffffef RBX: ffffffff92f30860 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9bf59e91ccd0 RDI: ffffffff913b6410
RBP: 000000000000000a R08: 00000000000005c7 R09: 0000000000000002
R10: ffffb9b003a87ce0 R11: 0000000000000002 R12: 0000000000000001
R13: ffffb9b003a87ce0 R14: ffffffffffffffef R15: 0000000000000008
FS: 00007fce81209240(0000) GS:ffff9bf6fdd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e99b728000 CR3: 00000001277c0002 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __warn.cold+0xb7/0x14d
? tracepoint_add_func+0x3b6/0x3f0
? report_bug+0xea/0x170
? handle_bug+0x58/0x90
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? __pfx_trace_sched_migrate_callback+0x10/0x10
? tracepoint_add_func+0x3b6/0x3f0
? __pfx_trace_sched_migrate_callback+0x10/0x10
? __pfx_trace_sched_migrate_callback+0x10/0x10
tracepoint_probe_register+0x78/0xb0
? __pfx_trace_sched_migrate_callback+0x10/0x10
osnoise_workload_start+0x2b5/0x370
timerlat_tracer_init+0x76/0x1b0
tracing_set_tracer+0x244/0x400
tracing_set_trace_write+0xa0/0xe0
vfs_write+0xfc/0x570
? do_sys_openat2+0x9c/0xe0
ksys_write+0x72/0xf0
do_syscall_64+0x79/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error
This patch addresses a race condition for an ODP MR that can result in a
CQE with an error on the UMR QP.
During the __mlx5_ib_dereg_mr() flow, the following sequence of calls
occurs:
mlx5_revoke_mr()
mlx5r_umr_revoke_mr()
mlx5r_umr_post_send_wait()
At this point, the lkey is freed from the hardware's perspective.
However, concurrently, mlx5_ib_invalidate_range() might be triggered by
another task attempting to invalidate a range for the same freed lkey.
This task will:
- Acquire the umem_odp->umem_mutex lock.
- Call mlx5r_umr_update_xlt() on the UMR QP.
- Since the lkey has already been freed, this can lead to a CQE error,
causing the UMR QP to enter an error state [1].
To resolve this race condition, the umem_odp->umem_mutex lock is now also
acquired as part of the mlx5_revoke_mr() scope. Upon successful revoke,
we set umem_odp->private which points to that MR to NULL, preventing any
further invalidation attempts on its lkey.
[1] From dmesg:
infiniband rocep8s0f0: dump_cqe:277:(pid 0): WC error: 6, Message: memory bind operation error
cqe_dump: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000030: 00 00 00 00 08 00 78 06 25 00 11 b9 00 0e dd d2
WARNING: CPU: 15 PID: 1506 at drivers/infiniband/hw/mlx5/umr.c:394 mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib]
Modules linked in: ip6table_mangle ip6table_natip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core
CPU: 15 UID: 0 PID: 1506 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1626
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib]
[..]
Call Trace:
<TASK>
mlx5r_umr_update_xlt+0x23c/0x3e0 [mlx5_ib]
mlx5_ib_invalidate_range+0x2e1/0x330 [mlx5_ib]
__mmu_notifier_invalidate_range_start+0x1e1/0x240
zap_page_range_single+0xf1/0x1a0
madvise_vma_behavior+0x677/0x6e0
do_madvise+0x1a2/0x4b0
__x64_sys_madvise+0x25/0x30
do_syscall_64+0x6b/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
