| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix racy issue from session lookup and expire
Increment the session reference count within the lock for lookup to avoid
racy issue with session expire. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq
completion variable initialization") introduced a write barrier in probe
function to store global '__scm' variable. We all known barriers are
paired (see memory-barriers.txt: "Note that write barriers should
normally be paired with read or address-dependency barriers"), therefore
accessing it from concurrent contexts requires read barrier. Previous
commit added such barrier in qcom_scm_is_available(), so let's use that
directly.
Lack of this read barrier can result in fetching stale '__scm' variable
value, NULL, and dereferencing it.
Note that barrier in qcom_scm_is_available() satisfies here the control
dependency. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mmp2: call pm_genpd_init() only after genpd.name is set
Setting the genpd's struct device's name with dev_set_name() is
happening within pm_genpd_init(). If it remains NULL, things can blow up
later, such as when crafting the devfs hierarchy for the power domain:
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
...
Call trace:
strlen from start_creating+0x90/0x138
start_creating from debugfs_create_dir+0x20/0x178
debugfs_create_dir from genpd_debug_add.part.0+0x4c/0x144
genpd_debug_add.part.0 from genpd_debug_init+0x74/0x90
genpd_debug_init from do_one_initcall+0x5c/0x244
do_one_initcall from kernel_init_freeable+0x19c/0x1f4
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x28
Bisecting tracks this crash back to commit 899f44531fe6 ("pmdomain: core:
Add GENPD_FLAG_DEV_NAME_FW flag"), which exchanges use of genpd->name
with dev_name(&genpd->dev) in genpd_debug_add.part(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: check dpu_plane_atomic_print_state() for valid sspp
Similar to the r_pipe sspp protect, add a check to protect
the pipe state prints to avoid NULL ptr dereference for cases when
the state is dumped without a corresponding atomic_check() where the
pipe->sspp is assigned.
Patchwork: https://patchwork.freedesktop.org/patch/628404/ |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: bpf_local_storage: Always use bpf_mem_alloc in PREEMPT_RT
In PREEMPT_RT, kmalloc(GFP_ATOMIC) is still not safe in non preemptible
context. bpf_mem_alloc must be used in PREEMPT_RT. This patch is
to enforce bpf_mem_alloc in the bpf_local_storage when CONFIG_PREEMPT_RT
is enabled.
[ 35.118559] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 35.118566] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1832, name: test_progs
[ 35.118569] preempt_count: 1, expected: 0
[ 35.118571] RCU nest depth: 1, expected: 1
[ 35.118577] INFO: lockdep is turned off.
...
[ 35.118647] __might_resched+0x433/0x5b0
[ 35.118677] rt_spin_lock+0xc3/0x290
[ 35.118700] ___slab_alloc+0x72/0xc40
[ 35.118723] __kmalloc_noprof+0x13f/0x4e0
[ 35.118732] bpf_map_kzalloc+0xe5/0x220
[ 35.118740] bpf_selem_alloc+0x1d2/0x7b0
[ 35.118755] bpf_local_storage_update+0x2fa/0x8b0
[ 35.118784] bpf_sk_storage_get_tracing+0x15a/0x1d0
[ 35.118791] bpf_prog_9a118d86fca78ebb_trace_inet_sock_set_state+0x44/0x66
[ 35.118795] bpf_trace_run3+0x222/0x400
[ 35.118820] __bpf_trace_inet_sock_set_state+0x11/0x20
[ 35.118824] trace_inet_sock_set_state+0x112/0x130
[ 35.118830] inet_sk_state_store+0x41/0x90
[ 35.118836] tcp_set_state+0x3b3/0x640
There is no need to adjust the gfp_flags passing to the
bpf_mem_cache_alloc_flags() which only honors the GFP_KERNEL.
The verifier has ensured GFP_KERNEL is passed only in sleepable context.
It has been an old issue since the first introduction of the
bpf_local_storage ~5 years ago, so this patch targets the bpf-next.
bpf_mem_alloc is needed to solve it, so the Fixes tag is set
to the commit when bpf_mem_alloc was first used in the bpf_local_storage. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mmp: pxa1908-mpmu: Fix a NULL vs IS_ERR() check
The devm_kzalloc() function returns NULL on error, not error pointers.
Update the check to match. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mmp: pxa1908-apbcp: Fix a NULL vs IS_ERR() check
The devm_kzalloc() function doesn't return error pointers, it returns
NULL on error. Update the check to match. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mmp: pxa1908-apbc: Fix NULL vs IS_ERR() check
The devm_kzalloc() function returns NULL on error, not error pointers.
Fix the check. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: tests: Fix potential NULL dereference in test_cfg80211_parse_colocated_ap()
kunit_kzalloc() may return NULL, dereferencing it without NULL check may
lead to NULL dereference.
Add a NULL check for ies. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: avoid NULL pointer dereference
When iterating over the links of a vif, we need to make sure that the
pointer is valid (in other words - that the link exists) before
dereferncing it.
Use for_each_vif_active_link that also does the check. |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Fix deadlock during uvc_probe
If uvc_probe() fails, it can end up calling uvc_status_unregister() before
uvc_status_init() is called.
Fix this by checking if dev->status is NULL or not in
uvc_status_unregister(). |
| In the Linux kernel, the following vulnerability has been resolved:
rhashtable: Fix potential deadlock by moving schedule_work outside lock
Move the hash table growth check and work scheduling outside the
rht lock to prevent a possible circular locking dependency.
The original implementation could trigger a lockdep warning due to
a potential deadlock scenario involving nested locks between
rhashtable bucket, rq lock, and dsq lock. By relocating the
growth check and work scheduling after releasing the rth lock, we break
this potential deadlock chain.
This change expands the flexibility of rhashtable by removing
restrictive locking that previously limited its use in scheduler
and workqueue contexts.
Import to say that this calls rht_grow_above_75(), which reads from
struct rhashtable without holding the lock, if this is a problem, we can
move the check to the lock, and schedule the workqueue after the lock.
Modified so that atomic_inc is also moved outside of the bucket
lock along with the growth above 75% check. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: th1520: Fix a NULL vs IS_ERR() bug
The devm_ioremap() function doesn't return error pointers, it returns
NULL. Update the error checking to match. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: winwing: Add NULL check in winwing_init_led()
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in winwing_init_led() is not checked.
Add NULL check in winwing_init_led(), to handle kernel NULL
pointer dereference error. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: chan: fix soft lockup in rtw89_entity_recalc_mgnt_roles()
During rtw89_entity_recalc_mgnt_roles(), there is a normalizing process
which will re-order the list if an entry with target pattern is found.
And once one is found, should have aborted the list_for_each_entry. But,
`break` just aborted the inner for-loop. The outer list_for_each_entry
still continues. Normally, only the first entry will match the target
pattern, and the re-ordering will change nothing, so there won't be
soft lockup. However, in some special cases, soft lockup would happen.
Fix it by `goto fill` to break from the list_for_each_entry.
The following is a sample of kernel log for this problem.
watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [wpa_supplicant:2055]
[...]
RIP: 0010:rtw89_entity_recalc ([...] chan.c:392 chan.c:479) rtw89_core
[...] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix off by one in mt7925_load_clc()
This comparison should be >= instead of > to prevent an out of bounds
read and write. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix NULL deref check in mt7925_change_vif_links
In mt7925_change_vif_links() devm_kzalloc() may return NULL but this
returned value is not checked. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name()
devm_kstrdup() can return a NULL pointer on failure,but this
returned value in btbcm_get_board_name() is not checked.
Add NULL check in btbcm_get_board_name(), to handle kernel NULL
pointer dereference error. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: check for NULL in btrtl_setup_realtek()
If insert an USB dongle which chip is not maintained in ic_id_table, it
will hit the NULL point accessed. Add a null point check to avoid the
Kernel Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: th1520: Fix memory corruption due to incorrect array size
The functions th1520_mbox_suspend_noirq and th1520_mbox_resume_noirq are
intended to save and restore the interrupt mask registers in the MBOX
ICU0. However, the array used to store these registers was incorrectly
sized, leading to memory corruption when accessing all four registers.
This commit corrects the array size to accommodate all four interrupt
mask registers, preventing memory corruption during suspend and resume
operations. |
