| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
|
A Missing Release of Memory after Effective Lifetime vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS).
In a Juniper Flow Monitoring (jflow) scenario route churn that causes BGP next hops to be updated will cause a slow memory leak and eventually a crash and restart of rpd.
Thread level memory utilization for the areas where the leak occurs can be checked using the below command:
user@host> show task memory detail | match so_in
so_in6 28 32 344450 11022400 344760 11032320
so_in 8 16 1841629 29466064 1841734 29467744
This issue affects:
Junos OS
* 21.4 versions earlier than 21.4R3;
* 22.1 versions earlier than 22.1R3;
* 22.2 versions earlier than 22.2R3.
Junos OS Evolved
* 21.4-EVO versions earlier than 21.4R3-EVO;
* 22.1-EVO versions earlier than 22.1R3-EVO;
* 22.2-EVO versions earlier than 22.2R3-EVO.
This issue does not affect:
Juniper Networks Junos OS versions earlier than 21.4R1.
Juniper Networks Junos OS Evolved versions earlier than 21.4R1.
|
|
An Unsupported Feature in the UI vulnerability in Juniper Networks Junos OS on MX Series and EX9200 Series allows an unauthenticated, network-based attacker to cause partial impact to the integrity of the device.
If the "tcp-reset" option is added to the "reject" action in an IPv6 filter which matches on "payload-protocol", packets are permitted instead of rejected. This happens because the payload-protocol match criteria is not supported in the kernel filter causing it to accept all packets without taking any other action. As a fix the payload-protocol match will be treated the same as a "next-header" match to avoid this filter bypass.
This issue doesn't affect IPv4 firewall filters.
This issue affects Juniper Networks Junos OS on MX Series and EX9200 Series:
* All versions earlier than 20.4R3-S7;
* 21.1 versions earlier than 21.1R3-S5;
* 21.2 versions earlier than 21.2R3-S5;
* 21.3 versions earlier than 21.3R3-S4;
* 21.4 versions earlier than 21.4R3-S4;
* 22.1 versions earlier than 22.1R3-S2;
* 22.2 versions earlier than 22.2R3-S2;
* 22.3 versions earlier than 22.3R2-S2, 22.3R3;
* 22.4 versions earlier than 22.4R1-S2, 22.4R2-S2, 22.4R3.
|
|
A Double Free vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX Series allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS).
In a remote access VPN scenario, if a "tcp-encap-profile" is configured and a sequence of specific packets is received, a flowd crash and restart will be observed.
This issue affects Juniper Networks Junos OS on SRX Series:
* All versions earlier than 20.4R3-S8;
* 21.2 versions earlier than 21.2R3-S6;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R3-S3;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S1;
* 22.4 versions earlier than 22.4R2-S2, 22.4R3.
|
|
An Improper Check for Unusual or Exceptional Conditions vulnerability in the kernel of Juniper Network Junos OS on MX Series allows a network based attacker with low privileges to cause a denial of service.
If a scaled configuration for Source class usage (SCU) / destination class usage (DCU) (more than 10 route classes) is present and the SCU/DCU statistics are gathered by executing specific SNMP requests or CLI commands, a 'vmcore' for the RE kernel will be seen which leads to a device restart. Continued exploitation of this issue will lead to a sustained DoS.
This issue only affects MX Series devices with MPC10, MPC11 or LC9600, and MX304. No other MX Series devices are affected.
This issue affects Juniper Networks Junos OS:
* All versions earlier than 20.4R3-S9;
* 21.2 versions earlier than 21.2R3-S6;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3;
* 22.1 versions earlier than 22.1R3;
* 22.2 versions earlier than 22.2R2;
* 22.3 versions earlier than 22.3R2.
|
|
A NULL Pointer Dereference vulnerability in Juniper Networks Junos OS Evolved on ACX7024, ACX7100-32C and ACX7100-48L allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS).
If a specific IPv4 UDP packet is received and sent to the Routing Engine (RE) packetio crashes and restarts which causes a momentary traffic interruption. Continued receipt of such packets will lead to a sustained DoS.
This issue does not happen with IPv6 packets.
This issue affects Juniper Networks Junos OS Evolved on ACX7024, ACX7100-32C and ACX7100-48L:
* 21.4-EVO versions earlier than 21.4R3-S6-EVO;
* 22.1-EVO versions earlier than 22.1R3-S5-EVO;
* 22.2-EVO versions earlier than 22.2R2-S1-EVO, 22.2R3-EVO;
* 22.3-EVO versions earlier than 22.3R2-EVO.
This issue does not affect Juniper Networks Junos OS Evolved versions earlier than 21.4R1-EVO.
|
|
An Improper Neutralization of Equivalent Special Elements vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on PTX Series allows a unauthenticated, adjacent attacker to cause a Denial of Service (DoS).
When MPLS packets are meant to be sent to a flexible tunnel interface (FTI) and if the FTI tunnel is down, these will hit the reject NH, due to which the packets get sent to the CPU and cause a host path wedge condition. This will cause the FPC to hang and requires a manual restart to recover.
Please note that this issue specifically affects PTX1000, PTX3000, PTX5000 with FPC3, PTX10002-60C, and PTX10008/16 with LC110x. Other PTX Series devices and Line Cards (LC) are not affected.
The following log message can be seen when the issue occurs:
Cmerror Op Set: Host Loopback: HOST LOOPBACK WEDGE DETECTED IN PATH ID <id> (URI: /fpc/<fpc>/pfe/<pfe>/cm/<cm>/Host_Loopback/<cm>/HOST_LOOPBACK_MAKE_CMERROR_ID[<id>])
This issue affects Juniper Networks Junos OS:
* All versions earlier than 20.4R3-S8;
* 21.1 versions earlier than 21.1R3-S4;
* 21.2 versions earlier than 21.2R3-S6;
* 21.3 versions earlier than 21.3R3-S3;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R2-S2, 22.1R3;
* 22.2 versions earlier than 22.2R2-S1, 22.2R3.
|
|
An Improper Access Control vulnerability in the Juniper Networks Paragon Active Assurance Control Center allows an unauthenticated network-based attacker to access reports without authenticating, potentially containing sensitive configuration information.
A feature was introduced in version 3.1.0 of the Paragon Active Assurance Control Center which allows users to selectively share account data. By exploiting this vulnerability, it is possible to access reports without being logged in, resulting in the opportunity for malicious exfiltration of user data.
Note that the Paragon Active Assurance Control Center SaaS offering is not affected by this issue.
This issue affects Juniper Networks Paragon Active Assurance versions 3.1.0, 3.2.0, 3.2.2, 3.3.0, 3.3.1, 3.4.0.
This issue does not affect Juniper Networks Paragon Active Assurance versions earlier than 3.1.0.
|
|
An Improper Check for Unusual or Exceptional Conditions vulnerability in Juniper DHCP Daemon (jdhcpd) of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker to cause the jdhcpd to consume all the CPU cycles resulting in a Denial of Service (DoS).
On Junos OS devices with forward-snooped-client configured, if an attacker sends a specific DHCP packet to a non-configured interface, this will cause an infinite loop. The DHCP process will have to be restarted to recover the service.
This issue affects:
Juniper Networks Junos OS
* All versions earlier than 20.4R3-S9;
* 21.2 versions earlier than 21.2R3-S7;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R3-S4;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S2;
* 22.4 versions earlier than 22.4R2-S2, 22.4R3;
* 23.2 versions earlier than 23.2R2.
|
|
An Improper Validation of Syntactic Correctness of Input vulnerability in Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause Denial of Service (DoS).
On all Junos OS MX Series and SRX Series platforms, when SIP ALG is enabled, and a specific SIP packet is received and processed, NAT IP allocation fails for genuine traffic, which causes Denial of Service (DoS). Continuous receipt of this specific SIP ALG packet will cause a sustained DoS condition.
NAT IP usage can be monitored by running the following command.
user@srx> show security nat resource-usage source-pool <source_pool_name>
Pool name: source_pool_name
..
Address Factor-index Port-range Used Avail Total Usage
X.X.X.X
0 Single Ports 50258 52342 62464 96% <<<<<
- Alg Ports 0 2048 2048 0%
This issue affects:
Juniper Networks Junos OS on MX Series and SRX Series
* All versions earlier than 21.2R3-S6;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R3-S4;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S1;
* 22.4 versions earlier than 22.4R2-S2, 22.4R3;
* 23.2 versions earlier than 23.2R1-S1, 23.2R2.
|
|
A Missing Release of Memory after Effective Lifetime vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX Series allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS).
If an MX Series device receives PTP packets on an MPC3E that doesn't support PTP this causes a memory leak which will result in unpredictable behavior and ultimately in an MPC crash and restart.
To monitor for this issue, please use the following FPC vty level commands:
show heap
shows an increase in "LAN buffer" utilization and
show clksync ptp nbr-upd-info
shows non-zero "Pending PFEs" counter.
This issue affects Juniper Networks Junos OS on MX Series with MPC3E:
* All versions earlier than 20.4R3-S3;
* 21.1 versions earlier than 21.1R3-S4;
* 21.2 versions earlier than 21.2R3;
* 21.3 versions earlier than 21.3R2-S1, 21.3R3;
* 21.4 versions earlier than 21.4R2;
* 22.1 versions earlier than 22.1R2.
|
|
An Improper Handling of Exceptional Conditions vulnerability in the broadband edge subscriber management daemon (bbe-smgd) of Juniper Networks Junos OS on MX Series allows an attacker directly connected to the vulnerable system who repeatedly flaps DHCP subscriber sessions to cause a slow memory leak, ultimately leading to a Denial of Service (DoS). Memory can only be recovered by manually restarting bbe-smgd.
This issue only occurs if BFD liveness detection for DHCP subscribers is enabled. Systems without BFD liveness detection enabled are not vulnerable to this issue.
Indication of the issue can be observed by periodically executing the 'show system processes extensive' command, which will indicate an increase in memory allocation for bbe-smgd. A small amount of memory is leaked every time a DHCP subscriber logs in, which will become visible over time, ultimately leading to memory starvation.
user@junos> show system processes extensive | match bbe-smgd
13071 root 24 0 415M 201M select 0 0:41 7.28% bbe-smgd{bbe-smgd}
13071 root 20 0 415M 201M select 1 0:04 0.00% bbe-smgd{bbe-smgd}
...
user@junos> show system processes extensive | match bbe-smgd
13071 root 20 0 420M 208M select 0 4:33 0.10% bbe-smgd{bbe-smgd}
13071 root 20 0 420M 208M select 0 0:12 0.00% bbe-smgd{bbe-smgd}
...
This issue affects Juniper Networks Junos OS on MX Series:
* All versions earlier than 20.4R3-S9;
* 21.2 versions earlier than 21.2R3-S7;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R3-S4;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S2;
* 22.4 versions earlier than 22.4R2-S2, 22.4R3;
* 23.2 versions earlier than 23.2R1-S1, 23.2R2.
|
|
A Heap-based Buffer Overflow vulnerability in the Network Services Daemon (NSD) of Juniper Networks Junos OS allows authenticated, low privileged, local attacker to cause a Denial of Service (DoS).
On an SRX 5000 Series device, when executing a specific command repeatedly, memory is corrupted, which leads to a Flow Processing Daemon (flowd) crash.
The NSD process has to be restarted to restore services.
If this issue occurs, it can be checked with the following command:
user@host> request security policies check
The following log message can also be observed:
Error: policies are out of sync for PFE node<number>.fpc<number>.pic<number>.
This issue affects:
Juniper Networks Junos OS on SRX 5000 Series
* All versions earlier than 20.4R3-S6;
* 21.1 versions earlier than 21.1R3-S5;
* 21.2 versions earlier than 21.2R3-S4;
* 21.3 versions earlier than 21.3R3-S3;
* 21.4 versions earlier than 21.4R3-S3;
* 22.1 versions earlier than 22.1R3-S1;
* 22.2 versions earlier than 22.2R3;
* 22.3 versions earlier than 22.3R2.
|
|
An Exposure of Resource to Wrong Sphere vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass the intended access restrictions.
In an Abstracted Fabric (AF) scenario if routing-instances (RI) are configured, specific valid traffic destined to the device can bypass the configured lo0 firewall filters as it's received in the wrong RI context.
This issue affects Juniper Networks Junos OS on MX Series:
* All versions earlier than 20.4R3-S9;
* 21.2 versions earlier than 21.2R3-S3;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R3;
* 22.2 versions earlier than 22.2R3;
* 22.3 versions earlier than 22.3R2.
|
|
An Allocation of Resources Without Limits or Throttling vulnerability in the kernel of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS).
If a high rate of specific valid packets are processed by the routing engine (RE) this will lead to a loss of connectivity of the RE with other components of the chassis and thereby a complete and persistent system outage. Please note that a carefully designed lo0 firewall filter will block or limit these packets which should prevent this issue from occurring.
The following log messages can be seen when this issue occurs:
<host> kernel: nf_conntrack: nf_conntrack: table full, dropping packet
This issue affects Juniper Networks Junos OS Evolved:
* All versions earlier than 20.4R3-S7-EVO;
* 21.2R1-EVO and later versions;
* 21.4-EVO versions earlier than 21.4R3-S5-EVO;
* 22.1-EVO versions earlier than 22.1R3-S2-EVO;
* 22.2-EVO versions earlier than 22.2R3-EVO;
* 22.3-EVO versions earlier than 22.3R2-EVO;
* 22.4-EVO versions earlier than 22.4R2-EVO.
|
| An Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in J-Web of Juniper Networks Junos OS on SRX Series and EX Series allows an attacker to construct a URL that when visited by another user enables the attacker to execute commands with the target's permissions, including an administrator.
A specific invocation of the emit_debug_note method in webauth_operation.php will echo back the data it receives.
This issue affects Juniper Networks Junos OS on SRX Series and EX Series:
* All versions earlier than 20.4R3-S10;
* 21.2 versions earlier than 21.2R3-S8;
* 21.4 versions earlier than 21.4R3-S6;
* 22.1 versions earlier than 22.1R3-S5;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S2;
* 22.4 versions earlier than 22.4R3-S1;
* 23.2 versions earlier than 23.2R2;
* 23.4 versions earlier than 23.4R2.
|
| An Improper Handling of Exceptional Conditions vulnerability in the Class of Service daemon (cosd) of Juniper Networks Junos OS allows an authenticated, network-based attacker with low privileges to cause a limited Denial of Service (DoS).
In a scaled CoS scenario with 1000s of interfaces, when specific low privileged commands, received over NETCONF, SSH or telnet, are handled by cosd on behalf of mgd, the respective child management daemon (mgd) processes will get stuck. In case of (Netconf over) SSH this leads to stuck SSH sessions, so that when the connection-limit for SSH is reached, new sessions can't be established anymore. A similar behavior will be seen for telnet etc.
Stuck mgd processes can be monitored by executing the following command:
user@host> show system processes extensive | match mgd | match sbwait
This issue affects Juniper Networks Junos OS:
* All versions earlier than 20.4R3-S9;
* 21.2 versions earlier than 21.2R3-S7;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R3-S4;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S2;
* 22.4 versions earlier than 22.4R3;
* 23.2 versions earlier than 23.2R1-S2, 23.2R2. |
| An Improper Validation of Syntactic Correctness of Input vulnerability in the kernel of Juniper Networks Junos OS Evolved on PTX series allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). When an incoming TCP packet destined to the device is malformed there is a possibility of a kernel panic. Only TCP packets destined to the ports for BGP, LDP and MSDP can trigger this. This issue only affects PTX10004, PTX10008, PTX10016. No other PTX Series devices or other platforms are affected. This issue affects Juniper Networks Junos OS Evolved: 20.4-EVO versions prior to 20.4R3-S4-EVO; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R3-EVO; 22.1-EVO versions prior to 22.1R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions prior to 20.4R1-EVO. |
| An Improper Validation of Specified Index, Position, or Offset in Input vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated network-based attacker to cause a Denial of Service (DoS). On SRX5000 Series with SPC3, SRX4000 Series, and vSRX, when PowerMode IPsec is configured and a malformed ESP packet matching an established IPsec tunnel is received the PFE crashes. This issue affects Juniper Networks Junos OS on SRX5000 Series with SPC3, SRX4000 Series, and vSRX: All versions prior to 19.4R2-S6, 19.4R3-S7; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S4; 20.3 versions prior to 20.3R3-S3; 20.4 versions prior to 20.4R3-S2; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R1-S2, 21.3R2. |
| A Use After Free vulnerability in the Routing Protocol Daemon (rdp) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker to cause Denial of Service (DoS). When a BGP session flap happens, a Use After Free of a memory location that was assigned to another object can occur, which will lead to an rpd crash. This is a race condition that is outside of the attacker's control and cannot be deterministically exploited. Continued flapping of BGP sessions can create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS: All versions prior to 18.4R2-S9, 18.4R3-S11; 19.1 versions prior to 19.1R3-S8; 19.2 version 19.2R1 and later versions; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S6, 19.4R3-S6; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R2-S1, 21.2R3. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S4-EVO; 21.1-EVO versions prior to 21.1R3-S2-EVO; 21.2-EVO versions prior to 21.2R3-EVO; 21.3-EVO versions prior to 21.3R2-EVO. |
| A limitless resource allocation vulnerability in FPC resources of Juniper Networks Junos OS Evolved on PTX Series allows an unprivileged attacker to cause Denial of Service (DoS). Continuously polling the SNMP jnxCosQstatTable causes the FPC to run out of GUID space, causing a Denial of Service to the FPC resources. When the FPC runs out of the GUID space, you will see the following syslog messages. The evo-aftmand-bt process is asserting. fpc1 evo-aftmand-bt[17556]: %USER-3: get_next_guid: Ran out of Guid Space start 1748051689472 end 1752346656767 fpc1 audit[17556]: %AUTH-5: ANOM_ABEND auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 kernel: %KERN-5: audit: type=1701 audit(1648567505.119:57): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 emfd-fpa[14438]: %USER-5: Alarm set: APP color=red, class=CHASSIS, reason=Application evo-aftmand-bt fail on node Fpc1 fpc1 emfd-fpa[14438]: %USER-3-EMF_FPA_ALARM_REP: RaiseAlarm: Alarm(Location: /Chassis[0]/Fpc[1] Module: sysman Object: evo-aftmand-bt:0 Error: 2) reported fpc1 sysepochman[12738]: %USER-5-SYSTEM_REBOOT_EVENT: Reboot [node] [ungraceful reboot] [evo-aftmand-bt exited] The FPC resources can be monitored using the following commands: user@router> start shell [vrf:none] user@router-re0:~$ cli -c "show platform application-info allocations app evo-aftmand-bt" | grep ^fpc | grep -v Route | grep -i -v Nexthop | awk '{total[$1] += $5} END { for (key in total) { print key " " total[key]/4294967296 }}' Once the FPCs become unreachable they must be manually restarted as they do not self-recover. This issue affects Juniper Networks Junos OS Evolved on PTX Series: All versions prior to 20.4R3-S4-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO version 21.2R1-EVO and later versions; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R2-EVO; 22.1-EVO versions prior to 22.1R2-EVO. |
