| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was detected in FastApiAdmin up to 2.2.0. This vulnerability affects the function upload_file_controller of the file /backend/app/api/v1/module_system/params/controller.py of the component Scheduled Task API. Performing a manipulation results in unrestricted upload. The attack can be initiated remotely. The exploit is now public and may be used. |
| Tesla Telematics Control Unit (TCU) firmware prior to v2025.14 contains an authentication bypass vulnerability. The TCU runs the Android Debug Bridge (adbd) as root and, despite a “lockdown” check that disables adb shell, still permits adb push/pull and adb forward. Because adbd is privileged and the device’s USB port is exposed externally, an attacker with physical access can write an arbitrary file to a writable location and then overwrite the kernel’s uevent_helper or /proc/sys/kernel/hotplug entries via ADB, causing the script to be executed with root privileges. |
| SmarterTools SmarterMail versions prior to build 9511 contain an authentication bypass vulnerability in the password reset API. The force-reset-password endpoint permits anonymous requests and fails to verify the existing password or a reset token when resetting system administrator accounts. An unauthenticated attacker can supply a target administrator username and a new password to reset the account, resulting in full administrative compromise of the SmarterMail instance. NOTE: SmarterMail system administrator privileges grant the ability to execute operating system commands via built-in management functionality, effectively providing administrative (SYSTEM or root) access on the underlying host. |
| SPIP versions prior to 4.4.10 contain an authentication bypass vulnerability caused by PHP type juggling that allows unauthenticated attackers to access protected information. Attackers can exploit loose type comparisons in authentication logic to bypass login verification and retrieve sensitive internal data. |
| SPIP before 4.3.6, 4.2.17, and 4.1.20 allows unauthorized content disclosure in the private area. The application does not properly check authorization when displaying content of articles and sections (rubriques) in AJAX-loaded fragments, allowing an authenticated attacker to access restricted content. This vulnerability is not mitigated by the SPIP security screen. |
| BloodX 1.0 contains an authentication bypass vulnerability in login.php that allows attackers to access the dashboard without valid credentials. Attackers can exploit the vulnerability by sending a crafted payload with '=''or' parameters to bypass login authentication and gain unauthorized access. |
| A vulnerability has been found in Dataease SQLBot up to 1.4.0. This affects an unknown function of the file backend/apps/system/api/assistant.py of the component API Endpoint. Such manipulation leads to improper access controls. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.0 mitigates this issue. The name of the patch is d640ac31d1ce64ce90e06cf7081163915c9fc28c. Upgrading the affected component is recommended. Multiple endpoints are affected. The vendor was contacted early about this disclosure. |
| A security vulnerability has been detected in Chia Blockchain 2.1.0. This issue affects the function _authenticate of the file rpc_server_base.py of the component RPC Credential Handler. The manipulation leads to improper authentication. The attack is possible to be carried out remotely. The attack is considered to have high complexity. The exploitability is assessed as difficult. The exploit has been disclosed publicly and may be used. The vendor was informed early via email. A separate report via bugbounty was rejected with the reason "This is by design. The user is responsible for host security". |
| A flaw has been found in Chia Blockchain 2.1.0. The affected element is the function send_transaction/get_private_key of the component RPC Server Master Passphrase Handler. This manipulation causes missing authentication. The attack can only be executed locally. The attack's complexity is rated as high. The exploitability is described as difficult. The exploit has been published and may be used. The vendor was informed early via email. A separate report via bugbounty was rejected with the reason "This is by design. The user is responsible for host security". |
| OpenEMR is a free and open source electronic health records and medical practice management application. Prior to 8.0.0, an unauthenticated token disclosure vulnerability in the MedEx callback endpoint allows any unauthenticated visitor to obtain the practice's MedEx API tokens, leading to complete third-party service compromise, PHI exfiltration, unauthorized actions on the MedEx platform, and HIPAA violations. The vulnerability exists because the endpoint bypasses authentication ($ignoreAuth = true) and performs a MedEx login whenever $_POST['callback_key'] is provided, returning the full JSON response including sensitive API tokens. This vulnerability is fixed in 8.0.0. |
| A vulnerability in the API user authentication of Cisco Catalyst SD-WAN Manager could allow an unauthenticated, remote attacker to gain access to an affected system as a user who has the netadmin role.
The vulnerability is due to improper authentication for requests that are sent to the API. An attacker could exploit this vulnerability by sending a crafted request to the API of an affected system. A successful exploit could allow the attacker to execute commands with the privileges of the netadmin role.
Note: Cisco Catalyst SD-WAN Manager releases 20.18 and later are not affected by this vulnerability. |
| Incorrect access control in the component download_wb.cgi of Weintek cMT-3072XH2 easyweb Web Version v2.1.53, OS v20231011 allows unauthenticated attack to download arbitrary files. |
| Incorrect access control in the VNC component of Weintek cMT-3072XH2 easyweb v2.1.53, OS v20231011 allows unauthorized attackers to access the HMI system. |
| Filament is a collection of full-stack components for accelerated Laravel development. Versions 4.0.0 through 4.3.0 contain a flaw in the handling of recovery codes for app-based multi-factor authentication, allowing the same recovery code to be reused indefinitely. This issue does not affect email-based MFA. It also only applies when recovery codes are enabled. This issue is fixed in version 4.3.1. |
| A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Tahoe 26.3. An app may be able to monitor keystrokes without user permission. |
| Seerr is an open-source media request and discovery manager for Jellyfin, Plex, and Emby. Starting in version 2.0.0 and prior to version 3.1.0, an authentication guard logic flaw in `POST /api/v1/auth/jellyfin` allows an unauthenticated attacker to register a new Seerr account on any Plex-configured instance by authenticating with an attacker-controlled Jellyfin server. The attacker receives an authenticated session and can immediately use the application with default permissions, including the ability to submit media requests to Radarr/Sonarr. Any Seerr deployment where all three of the following are true may be vulnerable: `settings.main.mediaServerType` is set to `PLEX` (the most common deployment).; `settings.jellyfin.ip` is set to `""` (default, meaning Jellyfin was never configured); and `settings.main.newPlexLogin` is set to `true` (default). Jellyfin-configured and Emby-configured deployments are not affected. Version 3.1.0 of Seerr fixes this issue. |
| The All-in-One Microsoft 365 & Entra ID / Azure AD SSO Login plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 2.2.5. This makes it possible for unauthenticated attackers to bypass authentication and log in as other users, including administrators. |
| SteVe is an open-source EV charging station management system. In versions up to and including 3.11.0, when a charger sends a StopTransaction message, SteVe looks up the transaction solely by transactionId (a sequential integer starting from 1) without verifying that the requesting charger matches the charger that originally started the transaction. Any authenticated charger can terminate any other charger’s active session across the entire network. The root cause is in OcppServerRepositoryImpl.getTransaction() which queries only by transactionId with no chargeBoxId ownership check. The validator checks that the transaction exists and is not already stopped but never verifies identity. As an attacker controlling a single registered charger I could enumerate sequential transaction IDs and send StopTransaction messages targeting active sessions on every other charger on the network simultaneously. Combined with FINDING-014 (unauthenticated SOAP endpoints), no registered charger is even required — the attack is executable with a single curl command requiring only a known chargeBoxId. Commit 7f169c6c5b36a9c458ec41ce8af581972e5c724e contains a fix for the issue. |
| A vulnerability was identified in go2ismail Free-CRM up to b83c40a90726d5e58f0cc680ffdcaa28a03fb5d1. This affects an unknown part of the file /api/Security/ of the component Security API. The manipulation leads to improper authorization. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The vendor was contacted early about this disclosure but did not respond in any way. |
| WeGIA is a web manager for charitable institutions. Prior to version 3.6.5, the script in adicionar_tipo_docs_atendido.php does not go through the project's central controller and does not have its own authentication and permission checks. A malicious user could make a request through tools like Postman or the file's URL on the web to access features exclusive to employees. The vulnerability allows external parties to inject unauthorized data in massive quantities into the application server's storage. Version 3.6.5 fixes the issue. |
