| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't readahead the relocation inode on RST
On relocation we're doing readahead on the relocation inode, but if the
filesystem is backed by a RAID stripe tree we can get ENOENT (e.g. due to
preallocated extents not being mapped in the RST) from the lookup.
But readahead doesn't handle the error and submits invalid reads to the
device, causing an assertion in the scatter-gather list code:
BTRFS info (device nvme1n1): balance: start -d -m -s
BTRFS info (device nvme1n1): relocating block group 6480920576 flags data|raid0
BTRFS error (device nvme1n1): cannot find raid-stripe for logical [6481928192, 6481969152] devid 2, profile raid0
------------[ cut here ]------------
kernel BUG at include/linux/scatterlist.h:115!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 1012 Comm: btrfs Not tainted 6.10.0-rc7+ #567
RIP: 0010:__blk_rq_map_sg+0x339/0x4a0
RSP: 0018:ffffc90001a43820 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802
RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000
RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8
R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000
FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002cd11000 CR3: 00000001109ea001 CR4: 0000000000370eb0
Call Trace:
<TASK>
? __die_body.cold+0x14/0x25
? die+0x2e/0x50
? do_trap+0xca/0x110
? do_error_trap+0x65/0x80
? __blk_rq_map_sg+0x339/0x4a0
? exc_invalid_op+0x50/0x70
? __blk_rq_map_sg+0x339/0x4a0
? asm_exc_invalid_op+0x1a/0x20
? __blk_rq_map_sg+0x339/0x4a0
nvme_prep_rq.part.0+0x9d/0x770
nvme_queue_rq+0x7d/0x1e0
__blk_mq_issue_directly+0x2a/0x90
? blk_mq_get_budget_and_tag+0x61/0x90
blk_mq_try_issue_list_directly+0x56/0xf0
blk_mq_flush_plug_list.part.0+0x52b/0x5d0
__blk_flush_plug+0xc6/0x110
blk_finish_plug+0x28/0x40
read_pages+0x160/0x1c0
page_cache_ra_unbounded+0x109/0x180
relocate_file_extent_cluster+0x611/0x6a0
? btrfs_search_slot+0xba4/0xd20
? balance_dirty_pages_ratelimited_flags+0x26/0xb00
relocate_data_extent.constprop.0+0x134/0x160
relocate_block_group+0x3f2/0x500
btrfs_relocate_block_group+0x250/0x430
btrfs_relocate_chunk+0x3f/0x130
btrfs_balance+0x71b/0xef0
? kmalloc_trace_noprof+0x13b/0x280
btrfs_ioctl+0x2c2e/0x3030
? kvfree_call_rcu+0x1e6/0x340
? list_lru_add_obj+0x66/0x80
? mntput_no_expire+0x3a/0x220
__x64_sys_ioctl+0x96/0xc0
do_syscall_64+0x54/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fcc04514f9b
Code: Unable to access opcode bytes at 0x7fcc04514f71.
RSP: 002b:00007ffeba923370 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fcc04514f9b
RDX: 00007ffeba923460 RSI: 00000000c4009420 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000013 R09: 0000000000000001
R10: 00007fcc043fbba8 R11: 0000000000000246 R12: 00007ffeba924fc5
R13: 00007ffeba923460 R14: 0000000000000002 R15: 00000000004d4bb0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:__blk_rq_map_sg+0x339/0x4a0
RSP: 0018:ffffc90001a43820 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802
RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000
RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8
R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000
FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fcc04514f71 CR3: 00000001109ea001 CR4: 0000000000370eb0
Kernel p
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: handle errors from btrfs_dec_ref() properly
In walk_up_proc() we BUG_ON(ret) from btrfs_dec_ref(). This is
incorrect, we have proper error handling here, return the error. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't BUG_ON() when 0 reference count at btrfs_lookup_extent_info()
Instead of doing a BUG_ON() handle the error by returning -EUCLEAN,
aborting the transaction and logging an error message. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid BUG_ON() while continue reshape after reassembling
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
<TASK>
raid5_sync_request+0x43d/0x550
md_do_sync+0xb7a/0x2110
md_thread+0x294/0x2b0
kthread+0x147/0x1c0
ret_from_fork+0x59/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.
Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.
Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
closures: Change BUG_ON() to WARN_ON()
If a BUG_ON() can be hit in the wild, it shouldn't be a BUG_ON()
For reference, this has popped up once in the CI, and we'll need more
info to debug it:
03240 ------------[ cut here ]------------
03240 kernel BUG at lib/closure.c:21!
03240 kernel BUG at lib/closure.c:21!
03240 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
03240 Modules linked in:
03240 CPU: 15 PID: 40534 Comm: kworker/u80:1 Not tainted 6.10.0-rc4-ktest-ga56da69799bd #25570
03240 Hardware name: linux,dummy-virt (DT)
03240 Workqueue: btree_update btree_interior_update_work
03240 pstate: 00001005 (nzcv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
03240 pc : closure_put+0x224/0x2a0
03240 lr : closure_put+0x24/0x2a0
03240 sp : ffff0000d12071c0
03240 x29: ffff0000d12071c0 x28: dfff800000000000 x27: ffff0000d1207360
03240 x26: 0000000000000040 x25: 0000000000000040 x24: 0000000000000040
03240 x23: ffff0000c1f20180 x22: 0000000000000000 x21: ffff0000c1f20168
03240 x20: 0000000040000000 x19: ffff0000c1f20140 x18: 0000000000000001
03240 x17: 0000000000003aa0 x16: 0000000000003ad0 x15: 1fffe0001c326974
03240 x14: 0000000000000a1e x13: 0000000000000000 x12: 1fffe000183e402d
03240 x11: ffff6000183e402d x10: dfff800000000000 x9 : ffff6000183e402e
03240 x8 : 0000000000000001 x7 : 00009fffe7c1bfd3 x6 : ffff0000c1f2016b
03240 x5 : ffff0000c1f20168 x4 : ffff6000183e402e x3 : ffff800081391954
03240 x2 : 0000000000000001 x1 : 0000000000000000 x0 : 00000000a8000000
03240 Call trace:
03240 closure_put+0x224/0x2a0
03240 bch2_check_for_deadlock+0x910/0x1028
03240 bch2_six_check_for_deadlock+0x1c/0x30
03240 six_lock_slowpath.isra.0+0x29c/0xed0
03240 six_lock_ip_waiter+0xa8/0xf8
03240 __bch2_btree_node_lock_write+0x14c/0x298
03240 bch2_trans_lock_write+0x6d4/0xb10
03240 __bch2_trans_commit+0x135c/0x5520
03240 btree_interior_update_work+0x1248/0x1c10
03240 process_scheduled_works+0x53c/0xd90
03240 worker_thread+0x370/0x8c8
03240 kthread+0x258/0x2e8
03240 ret_from_fork+0x10/0x20
03240 Code: aa1303e0 d63f0020 a94363f7 17ffff8c (d4210000)
03240 ---[ end trace 0000000000000000 ]---
03240 Kernel panic - not syncing: Oops - BUG: Fatal exception
03240 SMP: stopping secondary CPUs
03241 SMP: failed to stop secondary CPUs 13,15
03241 Kernel Offset: disabled
03241 CPU features: 0x00,00000003,80000008,4240500b
03241 Memory Limit: none
03241 ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception ]---
03246 ========= FAILED TIMEOUT copygc_torture_no_checksum in 7200s |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't drop extent_map for free space inode on write error
While running the CI for an unrelated change I hit the following panic
with generic/648 on btrfs_holes_spacecache.
assertion failed: block_start != EXTENT_MAP_HOLE, in fs/btrfs/extent_io.c:1385
------------[ cut here ]------------
kernel BUG at fs/btrfs/extent_io.c:1385!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 2695096 Comm: fsstress Kdump: loaded Tainted: G W 6.8.0-rc2+ #1
RIP: 0010:__extent_writepage_io.constprop.0+0x4c1/0x5c0
Call Trace:
<TASK>
extent_write_cache_pages+0x2ac/0x8f0
extent_writepages+0x87/0x110
do_writepages+0xd5/0x1f0
filemap_fdatawrite_wbc+0x63/0x90
__filemap_fdatawrite_range+0x5c/0x80
btrfs_fdatawrite_range+0x1f/0x50
btrfs_write_out_cache+0x507/0x560
btrfs_write_dirty_block_groups+0x32a/0x420
commit_cowonly_roots+0x21b/0x290
btrfs_commit_transaction+0x813/0x1360
btrfs_sync_file+0x51a/0x640
__x64_sys_fdatasync+0x52/0x90
do_syscall_64+0x9c/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
This happens because we fail to write out the free space cache in one
instance, come back around and attempt to write it again. However on
the second pass through we go to call btrfs_get_extent() on the inode to
get the extent mapping. Because this is a new block group, and with the
free space inode we always search the commit root to avoid deadlocking
with the tree, we find nothing and return a EXTENT_MAP_HOLE for the
requested range.
This happens because the first time we try to write the space cache out
we hit an error, and on an error we drop the extent mapping. This is
normal for normal files, but the free space cache inode is special. We
always expect the extent map to be correct. Thus the second time
through we end up with a bogus extent map.
Since we're deprecating this feature, the most straightforward way to
fix this is to simply skip dropping the extent map range for this failed
range.
I shortened the test by using error injection to stress the area to make
it easier to reproduce. With this patch in place we no longer panic
with my error injection test. |
| In the Linux kernel, the following vulnerability has been resolved:
cpu/hotplug: Don't offline the last non-isolated CPU
If a system has isolated CPUs via the "isolcpus=" command line parameter,
then an attempt to offline the last housekeeping CPU will result in a
WARN_ON() when rebuilding the scheduler domains and a subsequent panic due
to and unhandled empty CPU mas in partition_sched_domains_locked().
cpuset_hotplug_workfn()
rebuild_sched_domains_locked()
ndoms = generate_sched_domains(&doms, &attr);
cpumask_and(doms[0], top_cpuset.effective_cpus, housekeeping_cpumask(HK_FLAG_DOMAIN));
Thus results in an empty CPU mask which triggers the warning and then the
subsequent crash:
WARNING: CPU: 4 PID: 80 at kernel/sched/topology.c:2366 build_sched_domains+0x120c/0x1408
Call trace:
build_sched_domains+0x120c/0x1408
partition_sched_domains_locked+0x234/0x880
rebuild_sched_domains_locked+0x37c/0x798
rebuild_sched_domains+0x30/0x58
cpuset_hotplug_workfn+0x2a8/0x930
Unable to handle kernel paging request at virtual address fffe80027ab37080
partition_sched_domains_locked+0x318/0x880
rebuild_sched_domains_locked+0x37c/0x798
Aside of the resulting crash, it does not make any sense to offline the last
last housekeeping CPU.
Prevent this by masking out the non-housekeeping CPUs when selecting a
target CPU for initiating the CPU unplug operation via the work queue. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check rcu_read_lock_trace_held() before calling bpf map helpers
These three bpf_map_{lookup,update,delete}_elem() helpers are also
available for sleepable bpf program, so add the corresponding lock
assertion for sleepable bpf program, otherwise the following warning
will be reported when a sleepable bpf program manipulates bpf map under
interpreter mode (aka bpf_jit_enable=0):
WARNING: CPU: 3 PID: 4985 at kernel/bpf/helpers.c:40 ......
CPU: 3 PID: 4985 Comm: test_progs Not tainted 6.6.0+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
RIP: 0010:bpf_map_lookup_elem+0x54/0x60
......
Call Trace:
<TASK>
? __warn+0xa5/0x240
? bpf_map_lookup_elem+0x54/0x60
? report_bug+0x1ba/0x1f0
? handle_bug+0x40/0x80
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1b/0x20
? __pfx_bpf_map_lookup_elem+0x10/0x10
? rcu_lockdep_current_cpu_online+0x65/0xb0
? rcu_is_watching+0x23/0x50
? bpf_map_lookup_elem+0x54/0x60
? __pfx_bpf_map_lookup_elem+0x10/0x10
___bpf_prog_run+0x513/0x3b70
__bpf_prog_run32+0x9d/0xd0
? __bpf_prog_enter_sleepable_recur+0xad/0x120
? __bpf_prog_enter_sleepable_recur+0x3e/0x120
bpf_trampoline_6442580665+0x4d/0x1000
__x64_sys_getpgid+0x5/0x30
? do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
</TASK> |
| KZTech JT3500V 4G LTE CPE 2.0.1 contains a session management vulnerability that allows attackers to reuse old session credentials without proper expiration. Attackers can exploit the weak session handling to maintain unauthorized access and potentially compromise device authentication mechanisms. |
| HashiCorp Nomad and Nomad Enterprise 1.6.12 up to 1.7.9, and 1.8.1 archive unpacking during migration is vulnerable to path escaping of the allocation directory. This vulnerability, CVE-2024-6717, is fixed in Nomad 1.6.13, 1.7.10, and 1.8.2. |
| Langflow is a tool for building and deploying AI-powered agents and workflows. Prior to version 1.7.0, if an arbitrary path is specified in the request body's `fs_path`, the server serializes the Flow object into JSON and creates/overwrites a file at that path. There is no path restriction, normalization, or allowed directory enforcement, so absolute paths (e.g., /etc/poc.txt) are interpreted as is. Version 1.7.0 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix WARN_ON(!ctx) in __free_event() for partial init
Move the get_ctx(child_ctx) call and the child_event->ctx assignment to
occur immediately after the child event is allocated. Ensure that
child_event->ctx is non-NULL before any subsequent error path within
inherit_event calls free_event(), satisfying the assumptions of the
cleanup code.
Details:
There's no clear Fixes tag, because this bug is a side-effect of
multiple interacting commits over time (up to 15 years old), not
a single regression.
The code initially incremented refcount then assigned context
immediately after the child_event was created. Later, an early
validity check for child_event was added before the
refcount/assignment. Even later, a WARN_ON_ONCE() cleanup check was
added, assuming event->ctx is valid if the pmu_ctx is valid.
The problem is that the WARN_ON_ONCE() could trigger after the initial
check passed but before child_event->ctx was assigned, violating its
precondition. The solution is to assign child_event->ctx right after
its initial validation. This ensures the context exists for any
subsequent checks or cleanup routines, resolving the WARN_ON_ONCE().
To resolve it, defer the refcount update and child_event->ctx assignment
directly after child_event->pmu_ctx is set but before checking if the
parent event is orphaned. The cleanup routine depends on
event->pmu_ctx being non-NULL before it verifies event->ctx is
non-NULL. This also maintains the author's original intent of passing
in child_ctx to find_get_pmu_context before its refcount/assignment.
[ mingo: Expanded the changelog from another email by Gabriel Shahrouzi. ] |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: prevent BUG_ON by blocking retries on failed device resumes
A cache device failing to resume due to mapping errors should not be
retried, as the failure leaves a partially initialized policy object.
Repeating the resume operation risks triggering BUG_ON when reloading
cache mappings into the incomplete policy object.
Reproduce steps:
1. create a cache metadata consisting of 512 or more cache blocks,
with some mappings stored in the first array block of the mapping
array. Here we use cache_restore v1.0 to build the metadata.
cat <<EOF >> cmeta.xml
<superblock uuid="" block_size="128" nr_cache_blocks="512" \
policy="smq" hint_width="4">
<mappings>
<mapping cache_block="0" origin_block="0" dirty="false"/>
</mappings>
</superblock>
EOF
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
cache_restore -i cmeta.xml -o /dev/mapper/cmeta --metadata-version=2
dmsetup remove cmeta
2. wipe the second array block of the mapping array to simulate
data degradations.
mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \
2>/dev/null | hexdump -e '1/8 "%u\n"')
ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \
2>/dev/null | hexdump -e '1/8 "%u\n"')
dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock
3. try bringing up the cache device. The resume is expected to fail
due to the broken array block.
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dmsetup create cache --notable
dmsetup load cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
dmsetup resume cache
4. try resuming the cache again. An unexpected BUG_ON is triggered
while loading cache mappings.
dmsetup resume cache
Kernel logs:
(snip)
------------[ cut here ]------------
kernel BUG at drivers/md/dm-cache-policy-smq.c:752!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 332 Comm: dmsetup Not tainted 6.13.4 #3
RIP: 0010:smq_load_mapping+0x3e5/0x570
Fix by disallowing resume operations for devices that failed the
initial attempt. |
| A flaw has been found in Open5GS up to 2.7.5. This affects the function decode_ipv6_header/ogs_pfcp_pdr_rule_find_by_packet of the file lib/pfcp/rule-match.c of the component PFCP Session Establishment Request Handler. Executing manipulation can lead to reachable assertion. It is possible to launch the attack remotely. The exploit has been published and may be used. This patch is called b72d8349980076e2c033c8324f07747a86eea4f8. Applying a patch is advised to resolve this issue. |
| A vulnerability was detected in beecue FastBee up to 2.1. Impacted is the function getRootElement of the file springboot/fastbee-server/sip-server/src/main/java/com/fastbee/sip/handler/req/ReqAbstractHandler.java of the component SIP Message Handler. The manipulation results in xml external entity reference. It is possible to launch the attack remotely. A high complexity level is associated with this attack. The exploitability is considered difficult. The project owner replied to the issue report: "Okay, we'll handle it as soon as possible." |
| Requarks Wiki.js 2.5.307 does not properly revoke or invalidate active JWT tokens when a user logs out. As a result, previously issued tokens remain valid and can be reused to access the system, even after logout. This behavior affects session integrity and may allow unauthorized access if a token is compromised. The issue is present in the authentication resolver logic and affects both the GraphQL endpoint and the logout mechanism. |
| In HashiCorp Nomad and Nomad Enterprise from 0.6.1 up to 1.6.13, 1.7.10, and 1.8.2, the archive unpacking process is vulnerable to writes outside the allocation directory during migration of allocation directories when multiple archive headers target the same file. This vulnerability, CVE-2024-7625, is fixed in Nomad 1.6.14, 1.7.11, and 1.8.3. Access or compromise of the Nomad client agent at the source allocation first is a prerequisite for leveraging this vulnerability. |
| OpenXRechnungToolbox through 2024-10-05-3.0.0 before 6c50e89 allows XXE because the disallow-doctype-decl feature is not enabled in visualization/VisualizerImpl.java. |
| NovaRad NovaPACS Diagnostics Viewer 8.5.19.75 contains an unauthenticated XML External Entity (XXE) injection vulnerability in XML preference import settings. Attackers can craft malicious XML files with DTD parameter entities to retrieve arbitrary system files through an out-of-band channel attack. |
| Forgejo before 13.0.2 allows attackers to write to unintended files, and possibly obtain server shell access, because of mishandling of out-of-repository symlink destinations for template repositories. This is also fixed for 11 LTS in 11.0.7 and later. |
