| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: lock the inode in shared mode before starting fiemap
Currently fiemap does not take the inode's lock (VFS lock), it only locks
a file range in the inode's io tree. This however can lead to a deadlock
if we have a concurrent fsync on the file and fiemap code triggers a fault
when accessing the user space buffer with fiemap_fill_next_extent(). The
deadlock happens on the inode's i_mmap_lock semaphore, which is taken both
by fsync and btrfs_page_mkwrite(). This deadlock was recently reported by
syzbot and triggers a trace like the following:
task:syz-executor361 state:D stack:20264 pid:5668 ppid:5119 flags:0x00004004
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5293 [inline]
__schedule+0x995/0xe20 kernel/sched/core.c:6606
schedule+0xcb/0x190 kernel/sched/core.c:6682
wait_on_state fs/btrfs/extent-io-tree.c:707 [inline]
wait_extent_bit+0x577/0x6f0 fs/btrfs/extent-io-tree.c:751
lock_extent+0x1c2/0x280 fs/btrfs/extent-io-tree.c:1742
find_lock_delalloc_range+0x4e6/0x9c0 fs/btrfs/extent_io.c:488
writepage_delalloc+0x1ef/0x540 fs/btrfs/extent_io.c:1863
__extent_writepage+0x736/0x14e0 fs/btrfs/extent_io.c:2174
extent_write_cache_pages+0x983/0x1220 fs/btrfs/extent_io.c:3091
extent_writepages+0x219/0x540 fs/btrfs/extent_io.c:3211
do_writepages+0x3c3/0x680 mm/page-writeback.c:2581
filemap_fdatawrite_wbc+0x11e/0x170 mm/filemap.c:388
__filemap_fdatawrite_range mm/filemap.c:421 [inline]
filemap_fdatawrite_range+0x175/0x200 mm/filemap.c:439
btrfs_fdatawrite_range fs/btrfs/file.c:3850 [inline]
start_ordered_ops fs/btrfs/file.c:1737 [inline]
btrfs_sync_file+0x4ff/0x1190 fs/btrfs/file.c:1839
generic_write_sync include/linux/fs.h:2885 [inline]
btrfs_do_write_iter+0xcd3/0x1280 fs/btrfs/file.c:1684
call_write_iter include/linux/fs.h:2189 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x7dc/0xc50 fs/read_write.c:584
ksys_write+0x177/0x2a0 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f7d4054e9b9
RSP: 002b:00007f7d404fa2f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f7d405d87a0 RCX: 00007f7d4054e9b9
RDX: 0000000000000090 RSI: 0000000020000000 RDI: 0000000000000006
RBP: 00007f7d405a51d0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 61635f65646f6e69
R13: 65646f7475616f6e R14: 7261637369646f6e R15: 00007f7d405d87a8
</TASK>
INFO: task syz-executor361:5697 blocked for more than 145 seconds.
Not tainted 6.2.0-rc3-syzkaller-00376-g7c6984405241 #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor361 state:D stack:21216 pid:5697 ppid:5119 flags:0x00004004
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5293 [inline]
__schedule+0x995/0xe20 kernel/sched/core.c:6606
schedule+0xcb/0x190 kernel/sched/core.c:6682
rwsem_down_read_slowpath+0x5f9/0x930 kernel/locking/rwsem.c:1095
__down_read_common+0x54/0x2a0 kernel/locking/rwsem.c:1260
btrfs_page_mkwrite+0x417/0xc80 fs/btrfs/inode.c:8526
do_page_mkwrite+0x19e/0x5e0 mm/memory.c:2947
wp_page_shared+0x15e/0x380 mm/memory.c:3295
handle_pte_fault mm/memory.c:4949 [inline]
__handle_mm_fault mm/memory.c:5073 [inline]
handle_mm_fault+0x1b79/0x26b0 mm/memory.c:5219
do_user_addr_fault+0x69b/0xcb0 arch/x86/mm/fault.c:1428
handle_page_fault arch/x86/mm/fault.c:1519 [inline]
exc_page_fault+0x7a/0x110 arch/x86/mm/fault.c:1575
asm_exc_page_fault+0x22/0x30 arch/x86/include/asm/idtentry.h:570
RIP: 0010:copy_user_short_string+0xd/0x40 arch/x86/lib/copy_user_64.S:233
Code: 74 0a 89 (...)
RSP: 0018:ffffc9000570f330 EFLAGS: 000502
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
sysv: don't call sb_bread() with pointers_lock held
syzbot is reporting sleep in atomic context in SysV filesystem [1], for
sb_bread() is called with rw_spinlock held.
A "write_lock(&pointers_lock) => read_lock(&pointers_lock) deadlock" bug
and a "sb_bread() with write_lock(&pointers_lock)" bug were introduced by
"Replace BKL for chain locking with sysvfs-private rwlock" in Linux 2.5.12.
Then, "[PATCH] err1-40: sysvfs locking fix" in Linux 2.6.8 fixed the
former bug by moving pointers_lock lock to the callers, but instead
introduced a "sb_bread() with read_lock(&pointers_lock)" bug (which made
this problem easier to hit).
Al Viro suggested that why not to do like get_branch()/get_block()/
find_shared() in Minix filesystem does. And doing like that is almost a
revert of "[PATCH] err1-40: sysvfs locking fix" except that get_branch()
from with find_shared() is called without write_lock(&pointers_lock). |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
The following 3 locks would race against each other, causing the
deadlock situation in the Syzbot bug report:
- j1939_socks_lock
- active_session_list_lock
- sk_session_queue_lock
A reasonable fix is to change j1939_socks_lock to an rwlock, since in
the rare situations where a write lock is required for the linked list
that j1939_socks_lock is protecting, the code does not attempt to
acquire any more locks. This would break the circular lock dependency,
where, for example, the current thread already locks j1939_socks_lock
and attempts to acquire sk_session_queue_lock, and at the same time,
another thread attempts to acquire j1939_socks_lock while holding
sk_session_queue_lock.
NOTE: This patch along does not fix the unregister_netdevice bug
reported by Syzbot; instead, it solves a deadlock situation to prepare
for one or more further patches to actually fix the Syzbot bug, which
appears to be a reference counting problem within the j1939 codebase.
[mkl: remove unrelated newline change] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rt2x00: restart beacon queue when hardware reset
When a hardware reset is triggered, all registers are reset, so all
queues are forced to stop in hardware interface. However, mac80211
will not automatically stop the queue. If we don't manually stop the
beacon queue, the queue will be deadlocked and unable to start again.
This patch fixes the issue where Apple devices cannot connect to the
AP after calling ieee80211_restart_hw(). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: Avoid touching renamed directory if parent does not change
The VFS will not be locking moved directory if its parent does not
change. Change ocfs2 rename code to avoid touching renamed directory if
its parent does not change as without locking that can corrupt the
filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/ipoib: Fix mcast list locking
Releasing the `priv->lock` while iterating the `priv->multicast_list` in
`ipoib_mcast_join_task()` opens a window for `ipoib_mcast_dev_flush()` to
remove the items while in the middle of iteration. If the mcast is removed
while the lock was dropped, the for loop spins forever resulting in a hard
lockup (as was reported on RHEL 4.18.0-372.75.1.el8_6 kernel):
Task A (kworker/u72:2 below) | Task B (kworker/u72:0 below)
-----------------------------------+-----------------------------------
ipoib_mcast_join_task(work) | ipoib_ib_dev_flush_light(work)
spin_lock_irq(&priv->lock) | __ipoib_ib_dev_flush(priv, ...)
list_for_each_entry(mcast, | ipoib_mcast_dev_flush(dev = priv->dev)
&priv->multicast_list, list) |
ipoib_mcast_join(dev, mcast) |
spin_unlock_irq(&priv->lock) |
| spin_lock_irqsave(&priv->lock, flags)
| list_for_each_entry_safe(mcast, tmcast,
| &priv->multicast_list, list)
| list_del(&mcast->list);
| list_add_tail(&mcast->list, &remove_list)
| spin_unlock_irqrestore(&priv->lock, flags)
spin_lock_irq(&priv->lock) |
| ipoib_mcast_remove_list(&remove_list)
(Here, `mcast` is no longer on the | list_for_each_entry_safe(mcast, tmcast,
`priv->multicast_list` and we keep | remove_list, list)
spinning on the `remove_list` of | >>> wait_for_completion(&mcast->done)
the other thread which is blocked |
and the list is still valid on |
it's stack.)
Fix this by keeping the lock held and changing to GFP_ATOMIC to prevent
eventual sleeps.
Unfortunately we could not reproduce the lockup and confirm this fix but
based on the code review I think this fix should address such lockups.
crash> bc 31
PID: 747 TASK: ff1c6a1a007e8000 CPU: 31 COMMAND: "kworker/u72:2"
--
[exception RIP: ipoib_mcast_join_task+0x1b1]
RIP: ffffffffc0944ac1 RSP: ff646f199a8c7e00 RFLAGS: 00000002
RAX: 0000000000000000 RBX: ff1c6a1a04dc82f8 RCX: 0000000000000000
work (&priv->mcast_task{,.work})
RDX: ff1c6a192d60ac68 RSI: 0000000000000286 RDI: ff1c6a1a04dc8000
&mcast->list
RBP: ff646f199a8c7e90 R8: ff1c699980019420 R9: ff1c6a1920c9a000
R10: ff646f199a8c7e00 R11: ff1c6a191a7d9800 R12: ff1c6a192d60ac00
mcast
R13: ff1c6a1d82200000 R14: ff1c6a1a04dc8000 R15: ff1c6a1a04dc82d8
dev priv (&priv->lock) &priv->multicast_list (aka head)
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
--- <NMI exception stack> ---
#5 [ff646f199a8c7e00] ipoib_mcast_join_task+0x1b1 at ffffffffc0944ac1 [ib_ipoib]
#6 [ff646f199a8c7e98] process_one_work+0x1a7 at ffffffff9bf10967
crash> rx ff646f199a8c7e68
ff646f199a8c7e68: ff1c6a1a04dc82f8 <<< work = &priv->mcast_task.work
crash> list -hO ipoib_dev_priv.multicast_list ff1c6a1a04dc8000
(empty)
crash> ipoib_dev_priv.mcast_task.work.func,mcast_mutex.owner.counter ff1c6a1a04dc8000
mcast_task.work.func = 0xffffffffc0944910 <ipoib_mcast_join_task>,
mcast_mutex.owner.counter = 0xff1c69998efec000
crash> b 8
PID: 8 TASK: ff1c69998efec000 CPU: 33 COMMAND: "kworker/u72:0"
--
#3 [ff646f1980153d50] wait_for_completion+0x96 at ffffffff9c7d7646
#4 [ff646f1980153d90] ipoib_mcast_remove_list+0x56 at ffffffffc0944dc6 [ib_ipoib]
#5 [ff646f1980153de8] ipoib_mcast_dev_flush+0x1a7 at ffffffffc09455a7 [ib_ipoib]
#6 [ff646f1980153e58] __ipoib_ib_dev_flush+0x1a4 at ffffffffc09431a4 [ib_ipoib]
#7 [ff
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock
__dma_entry_alloc_check_leak() calls into printk -> serial console
output (qcom geni) and grabs port->lock under free_entries_lock
spin lock, which is a reverse locking dependency chain as qcom_geni
IRQ handler can call into dma-debug code and grab free_entries_lock
under port->lock.
Move __dma_entry_alloc_check_leak() call out of free_entries_lock
scope so that we don't acquire serial console's port->lock under it.
Trimmed-down lockdep splat:
The existing dependency chain (in reverse order) is:
-> #2 (free_entries_lock){-.-.}-{2:2}:
_raw_spin_lock_irqsave+0x60/0x80
dma_entry_alloc+0x38/0x110
debug_dma_map_page+0x60/0xf8
dma_map_page_attrs+0x1e0/0x230
dma_map_single_attrs.constprop.0+0x6c/0xc8
geni_se_rx_dma_prep+0x40/0xcc
qcom_geni_serial_isr+0x310/0x510
__handle_irq_event_percpu+0x110/0x244
handle_irq_event_percpu+0x20/0x54
handle_irq_event+0x50/0x88
handle_fasteoi_irq+0xa4/0xcc
handle_irq_desc+0x28/0x40
generic_handle_domain_irq+0x24/0x30
gic_handle_irq+0xc4/0x148
do_interrupt_handler+0xa4/0xb0
el1_interrupt+0x34/0x64
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x64/0x68
arch_local_irq_enable+0x4/0x8
____do_softirq+0x18/0x24
...
-> #1 (&port_lock_key){-.-.}-{2:2}:
_raw_spin_lock_irqsave+0x60/0x80
qcom_geni_serial_console_write+0x184/0x1dc
console_flush_all+0x344/0x454
console_unlock+0x94/0xf0
vprintk_emit+0x238/0x24c
vprintk_default+0x3c/0x48
vprintk+0xb4/0xbc
_printk+0x68/0x90
register_console+0x230/0x38c
uart_add_one_port+0x338/0x494
qcom_geni_serial_probe+0x390/0x424
platform_probe+0x70/0xc0
really_probe+0x148/0x280
__driver_probe_device+0xfc/0x114
driver_probe_device+0x44/0x100
__device_attach_driver+0x64/0xdc
bus_for_each_drv+0xb0/0xd8
__device_attach+0xe4/0x140
device_initial_probe+0x1c/0x28
bus_probe_device+0x44/0xb0
device_add+0x538/0x668
of_device_add+0x44/0x50
of_platform_device_create_pdata+0x94/0xc8
of_platform_bus_create+0x270/0x304
of_platform_populate+0xac/0xc4
devm_of_platform_populate+0x60/0xac
geni_se_probe+0x154/0x160
platform_probe+0x70/0xc0
...
-> #0 (console_owner){-...}-{0:0}:
__lock_acquire+0xdf8/0x109c
lock_acquire+0x234/0x284
console_flush_all+0x330/0x454
console_unlock+0x94/0xf0
vprintk_emit+0x238/0x24c
vprintk_default+0x3c/0x48
vprintk+0xb4/0xbc
_printk+0x68/0x90
dma_entry_alloc+0xb4/0x110
debug_dma_map_sg+0xdc/0x2f8
__dma_map_sg_attrs+0xac/0xe4
dma_map_sgtable+0x30/0x4c
get_pages+0x1d4/0x1e4 [msm]
msm_gem_pin_pages_locked+0x38/0xac [msm]
msm_gem_pin_vma_locked+0x58/0x88 [msm]
msm_ioctl_gem_submit+0xde4/0x13ac [msm]
drm_ioctl_kernel+0xe0/0x15c
drm_ioctl+0x2e8/0x3f4
vfs_ioctl+0x30/0x50
...
Chain exists of:
console_owner --> &port_lock_key --> free_entries_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(free_entries_lock);
lock(&port_lock_key);
lock(free_entries_lock);
lock(console_owner);
*** DEADLOCK ***
Call trace:
dump_backtrace+0xb4/0xf0
show_stack+0x20/0x30
dump_stack_lvl+0x60/0x84
dump_stack+0x18/0x24
print_circular_bug+0x1cc/0x234
check_noncircular+0x78/0xac
__lock_acquire+0xdf8/0x109c
lock_acquire+0x234/0x284
console_flush_all+0x330/0x454
consol
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
PM: sleep: Fix possible deadlocks in core system-wide PM code
It is reported that in low-memory situations the system-wide resume core
code deadlocks, because async_schedule_dev() executes its argument
function synchronously if it cannot allocate memory (and not only in
that case) and that function attempts to acquire a mutex that is already
held. Executing the argument function synchronously from within
dpm_async_fn() may also be problematic for ordering reasons (it may
cause a consumer device's resume callback to be invoked before a
requisite supplier device's one, for example).
Address this by changing the code in question to use
async_schedule_dev_nocall() for scheduling the asynchronous
execution of device suspend and resume functions and to directly
run them synchronously if async_schedule_dev_nocall() returns false. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Don't unref the same fb many times by mistake due to deadlock handling
If we get a deadlock after the fb lookup in drm_mode_page_flip_ioctl()
we proceed to unref the fb and then retry the whole thing from the top.
But we forget to reset the fb pointer back to NULL, and so if we then
get another error during the retry, before the fb lookup, we proceed
the unref the same fb again without having gotten another reference.
The end result is that the fb will (eventually) end up being freed
while it's still in use.
Reset fb to NULL once we've unreffed it to avoid doing it again
until we've done another fb lookup.
This turned out to be pretty easy to hit on a DG2 when doing async
flips (and CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y). The first symptom I
saw that drm_closefb() simply got stuck in a busy loop while walking
the framebuffer list. Fortunately I was able to convince it to oops
instead, and from there it was easier to track down the culprit. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3: Fix soft lockup triggered by arm_smmu_mm_invalidate_range
When running an SVA case, the following soft lockup is triggered:
--------------------------------------------------------------------
watchdog: BUG: soft lockup - CPU#244 stuck for 26s!
pstate: 83400009 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : arm_smmu_cmdq_issue_cmdlist+0x178/0xa50
lr : arm_smmu_cmdq_issue_cmdlist+0x150/0xa50
sp : ffff8000d83ef290
x29: ffff8000d83ef290 x28: 000000003b9aca00 x27: 0000000000000000
x26: ffff8000d83ef3c0 x25: da86c0812194a0e8 x24: 0000000000000000
x23: 0000000000000040 x22: ffff8000d83ef340 x21: ffff0000c63980c0
x20: 0000000000000001 x19: ffff0000c6398080 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffff3000b4a3bbb0
x14: ffff3000b4a30888 x13: ffff3000b4a3cf60 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc08120e4d6bc
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000048cfa
x5 : 0000000000000000 x4 : 0000000000000001 x3 : 000000000000000a
x2 : 0000000080000000 x1 : 0000000000000000 x0 : 0000000000000001
Call trace:
arm_smmu_cmdq_issue_cmdlist+0x178/0xa50
__arm_smmu_tlb_inv_range+0x118/0x254
arm_smmu_tlb_inv_range_asid+0x6c/0x130
arm_smmu_mm_invalidate_range+0xa0/0xa4
__mmu_notifier_invalidate_range_end+0x88/0x120
unmap_vmas+0x194/0x1e0
unmap_region+0xb4/0x144
do_mas_align_munmap+0x290/0x490
do_mas_munmap+0xbc/0x124
__vm_munmap+0xa8/0x19c
__arm64_sys_munmap+0x28/0x50
invoke_syscall+0x78/0x11c
el0_svc_common.constprop.0+0x58/0x1c0
do_el0_svc+0x34/0x60
el0_svc+0x2c/0xd4
el0t_64_sync_handler+0x114/0x140
el0t_64_sync+0x1a4/0x1a8
--------------------------------------------------------------------
Note that since 6.6-rc1 the arm_smmu_mm_invalidate_range above is renamed
to "arm_smmu_mm_arch_invalidate_secondary_tlbs", yet the problem remains.
The commit 06ff87bae8d3 ("arm64: mm: remove unused functions and variable
protoypes") fixed a similar lockup on the CPU MMU side. Yet, it can occur
to SMMU too, since arm_smmu_mm_arch_invalidate_secondary_tlbs() is called
typically next to MMU tlb flush function, e.g.
tlb_flush_mmu_tlbonly {
tlb_flush {
__flush_tlb_range {
// check MAX_TLBI_OPS
}
}
mmu_notifier_arch_invalidate_secondary_tlbs {
arm_smmu_mm_arch_invalidate_secondary_tlbs {
// does not check MAX_TLBI_OPS
}
}
}
Clone a CMDQ_MAX_TLBI_OPS from the MAX_TLBI_OPS in tlbflush.h, since in an
SVA case SMMU uses the CPU page table, so it makes sense to align with the
tlbflush code. Then, replace per-page TLBI commands with a single per-asid
TLBI command, if the request size hits this threshold. |
| An issue was discovered in PyTorch v2.5 and v2.7.1. Omission of profiler.stop() can cause torch.profiler.profile (PythonTracer) to crash or hang during finalization, leading to a Denial of Service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix deadlock between rcu_tasks_trace and event_mutex.
Fix the following deadlock:
CPU A
_free_event()
perf_kprobe_destroy()
mutex_lock(&event_mutex)
perf_trace_event_unreg()
synchronize_rcu_tasks_trace()
There are several paths where _free_event() grabs event_mutex
and calls sync_rcu_tasks_trace. Above is one such case.
CPU B
bpf_prog_test_run_syscall()
rcu_read_lock_trace()
bpf_prog_run_pin_on_cpu()
bpf_prog_load()
bpf_tracing_func_proto()
trace_set_clr_event()
mutex_lock(&event_mutex)
Delegate trace_set_clr_event() to workqueue to avoid
such lock dependency. |
| Plex Media Server (PMS) 1.41.7.x through 1.42.0.x before 1.42.1 is affected by incorrect resource transfer between spheres because /myplex/account provides the credentials of the server owner (and a /api/resources call reveals other servers accessible by that server owner). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: usbhid: fix info leak in hid_submit_ctrl
In hid_submit_ctrl(), the way of calculating the report length doesn't
take into account that report->size can be zero. When running the
syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to
calculate transfer_buffer_length as 16384. When this urb is passed to
the usb core layer, KMSAN reports an info leak of 16384 bytes.
To fix this, first modify hid_report_len() to account for the zero
report size case by using DIV_ROUND_UP for the division. Then, call it
from hid_submit_ctrl(). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/mm: Fix in_atomic() handling in do_secure_storage_access()
Kernel user spaces accesses to not exported pages in atomic context
incorrectly try to resolve the page fault.
With debug options enabled call traces like this can be seen:
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1523
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 419074, name: qemu-system-s39
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
Preemption disabled at:
[<00000383ea47cfa2>] copy_page_from_iter_atomic+0xa2/0x8a0
CPU: 12 UID: 0 PID: 419074 Comm: qemu-system-s39
Tainted: G W 6.16.0-20250531.rc0.git0.69b3a602feac.63.fc42.s390x+debug #1 PREEMPT
Tainted: [W]=WARN
Hardware name: IBM 3931 A01 703 (LPAR)
Call Trace:
[<00000383e990d282>] dump_stack_lvl+0xa2/0xe8
[<00000383e99bf152>] __might_resched+0x292/0x2d0
[<00000383eaa7c374>] down_read+0x34/0x2d0
[<00000383e99432f8>] do_secure_storage_access+0x108/0x360
[<00000383eaa724b0>] __do_pgm_check+0x130/0x220
[<00000383eaa842e4>] pgm_check_handler+0x114/0x160
[<00000383ea47d028>] copy_page_from_iter_atomic+0x128/0x8a0
([<00000383ea47d016>] copy_page_from_iter_atomic+0x116/0x8a0)
[<00000383e9c45eae>] generic_perform_write+0x16e/0x310
[<00000383e9eb87f4>] ext4_buffered_write_iter+0x84/0x160
[<00000383e9da0de4>] vfs_write+0x1c4/0x460
[<00000383e9da123c>] ksys_write+0x7c/0x100
[<00000383eaa7284e>] __do_syscall+0x15e/0x280
[<00000383eaa8417e>] system_call+0x6e/0x90
INFO: lockdep is turned off.
It is not allowed to take the mmap_lock while in atomic context. Therefore
handle such a secure storage access fault as if the accessed page is not
mapped: the uaccess function will return -EFAULT, and the caller has to
deal with this. Usually this means that the access is retried in process
context, which allows to resolve the page fault (or in this case export the
page). |
| In the Linux kernel, the following vulnerability has been resolved:
__legitimize_mnt(): check for MNT_SYNC_UMOUNT should be under mount_lock
... or we risk stealing final mntput from sync umount - raising mnt_count
after umount(2) has verified that victim is not busy, but before it
has set MNT_SYNC_UMOUNT; in that case __legitimize_mnt() doesn't see
that it's safe to quietly undo mnt_count increment and leaves dropping
the reference to caller, where it'll be a full-blown mntput().
Check under mount_lock is needed; leaving the current one done before
taking that makes no sense - it's nowhere near common enough to bother
with. |
| In the Linux kernel, the following vulnerability has been resolved:
um: work around sched_yield not yielding in time-travel mode
sched_yield by a userspace may not actually cause scheduling in
time-travel mode as no time has passed. In the case seen it appears to
be a badly implemented userspace spinlock in ASAN. Unfortunately, with
time-travel it causes an extreme slowdown or even deadlock depending on
the kernel configuration (CONFIG_UML_MAX_USERSPACE_ITERATIONS).
Work around it by accounting time to the process whenever it executes a
sched_yield syscall. |
| In the Linux kernel, the following vulnerability has been resolved:
PM: hibernate: Avoid deadlock in hibernate_compressor_param_set()
syzbot reported a deadlock in lock_system_sleep() (see below).
The write operation to "/sys/module/hibernate/parameters/compressor"
conflicts with the registration of ieee80211 device, resulting in a deadlock
when attempting to acquire system_transition_mutex under param_lock.
To avoid this deadlock, change hibernate_compressor_param_set() to use
mutex_trylock() for attempting to acquire system_transition_mutex and
return -EBUSY when it fails.
Task flags need not be saved or adjusted before calling
mutex_trylock(&system_transition_mutex) because the caller is not going
to end up waiting for this mutex and if it runs concurrently with system
suspend in progress, it will be frozen properly when it returns to user
space.
syzbot report:
syz-executor895/5833 is trying to acquire lock:
ffffffff8e0828c8 (system_transition_mutex){+.+.}-{4:4}, at: lock_system_sleep+0x87/0xa0 kernel/power/main.c:56
but task is already holding lock:
ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: kernel_param_lock kernel/params.c:607 [inline]
ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: param_attr_store+0xe6/0x300 kernel/params.c:586
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (param_lock){+.+.}-{4:4}:
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730
ieee80211_rate_control_ops_get net/mac80211/rate.c:220 [inline]
rate_control_alloc net/mac80211/rate.c:266 [inline]
ieee80211_init_rate_ctrl_alg+0x18d/0x6b0 net/mac80211/rate.c:1015
ieee80211_register_hw+0x20cd/0x4060 net/mac80211/main.c:1531
mac80211_hwsim_new_radio+0x304e/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5558
init_mac80211_hwsim+0x432/0x8c0 drivers/net/wireless/virtual/mac80211_hwsim.c:6910
do_one_initcall+0x128/0x700 init/main.c:1257
do_initcall_level init/main.c:1319 [inline]
do_initcalls init/main.c:1335 [inline]
do_basic_setup init/main.c:1354 [inline]
kernel_init_freeable+0x5c7/0x900 init/main.c:1568
kernel_init+0x1c/0x2b0 init/main.c:1457
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
-> #2 (rtnl_mutex){+.+.}-{4:4}:
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730
wg_pm_notification drivers/net/wireguard/device.c:80 [inline]
wg_pm_notification+0x49/0x180 drivers/net/wireguard/device.c:64
notifier_call_chain+0xb7/0x410 kernel/notifier.c:85
notifier_call_chain_robust kernel/notifier.c:120 [inline]
blocking_notifier_call_chain_robust kernel/notifier.c:345 [inline]
blocking_notifier_call_chain_robust+0xc9/0x170 kernel/notifier.c:333
pm_notifier_call_chain_robust+0x27/0x60 kernel/power/main.c:102
snapshot_open+0x189/0x2b0 kernel/power/user.c:77
misc_open+0x35a/0x420 drivers/char/misc.c:179
chrdev_open+0x237/0x6a0 fs/char_dev.c:414
do_dentry_open+0x735/0x1c40 fs/open.c:956
vfs_open+0x82/0x3f0 fs/open.c:1086
do_open fs/namei.c:3830 [inline]
path_openat+0x1e88/0x2d80 fs/namei.c:3989
do_filp_open+0x20c/0x470 fs/namei.c:4016
do_sys_openat2+0x17a/0x1e0 fs/open.c:1428
do_sys_open fs/open.c:1443 [inline]
__do_sys_openat fs/open.c:1459 [inline]
__se_sys_openat fs/open.c:1454 [inline]
__x64_sys_openat+0x175/0x210 fs/open.c:1454
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #1 ((pm_chain_head).rwsem){++++}-{4:4}:
down_read+0x9a/0x330 kernel/locking/rwsem.c:1524
blocking_notifier_call_chain_robust kerne
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: Prevent copying of nlink with value 0 from disk inode
syzbot report a deadlock in diFree. [1]
When calling "ioctl$LOOP_SET_STATUS64", the offset value passed in is 4,
which does not match the mounted loop device, causing the mapping of the
mounted loop device to be invalidated.
When creating the directory and creating the inode of iag in diReadSpecial(),
read the page of fixed disk inode (AIT) in raw mode in read_metapage(), the
metapage data it returns is corrupted, which causes the nlink value of 0 to be
assigned to the iag inode when executing copy_from_dinode(), which ultimately
causes a deadlock when entering diFree().
To avoid this, first check the nlink value of dinode before setting iag inode.
[1]
WARNING: possible recursive locking detected
6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Not tainted
--------------------------------------------
syz-executor301/5309 is trying to acquire lock:
ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889
but task is already holding lock:
ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(imap->im_aglock[index]));
lock(&(imap->im_aglock[index]));
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by syz-executor301/5309:
#0: ffff8880422a4420 (sb_writers#9){.+.+}-{0:0}, at: mnt_want_write+0x3f/0x90 fs/namespace.c:515
#1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: inode_lock_nested include/linux/fs.h:850 [inline]
#1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: filename_create+0x260/0x540 fs/namei.c:4026
#2: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630
#3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2460 [inline]
#3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
#3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocAG+0x4b7/0x1e50 fs/jfs/jfs_imap.c:1669
#4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2477 [inline]
#4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
#4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocAG+0x869/0x1e50 fs/jfs/jfs_imap.c:1669
stack backtrace:
CPU: 0 UID: 0 PID: 5309 Comm: syz-executor301 Not tainted 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3037
check_deadlock kernel/locking/lockdep.c:3089 [inline]
validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3891
__lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
__mutex_lock_common kernel/locking/mutex.c:608 [inline]
__mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752
diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889
jfs_evict_inode+0x32d/0x440 fs/jfs/inode.c:156
evict+0x4e8/0x9b0 fs/inode.c:725
diFreeSpecial fs/jfs/jfs_imap.c:552 [inline]
duplicateIXtree+0x3c6/0x550 fs/jfs/jfs_imap.c:3022
diNewIAG fs/jfs/jfs_imap.c:2597 [inline]
diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
diAllocAG+0x17dc/0x1e50 fs/jfs/jfs_imap.c:1669
diAlloc+0x1d2/0x1630 fs/jfs/jfs_imap.c:1590
ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56
jfs_mkdir+0x1c5/0xba0 fs/jfs/namei.c:225
vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
do_mkdirat+0x264/0x3a0 fs/namei.c:4280
__do_sys_mkdirat fs/namei.c:4295 [inline]
__se_sys_mkdirat fs/namei.c:4293 [inline]
__x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
do_syscall_x64 arch/x86/en
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: vlan: don't propagate flags on open
With the device instance lock, there is now a possibility of a deadlock:
[ 1.211455] ============================================
[ 1.211571] WARNING: possible recursive locking detected
[ 1.211687] 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 Not tainted
[ 1.211823] --------------------------------------------
[ 1.211936] ip/184 is trying to acquire lock:
[ 1.212032] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_set_allmulti+0x4e/0xb0
[ 1.212207]
[ 1.212207] but task is already holding lock:
[ 1.212332] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[ 1.212487]
[ 1.212487] other info that might help us debug this:
[ 1.212626] Possible unsafe locking scenario:
[ 1.212626]
[ 1.212751] CPU0
[ 1.212815] ----
[ 1.212871] lock(&dev->lock);
[ 1.212944] lock(&dev->lock);
[ 1.213016]
[ 1.213016] *** DEADLOCK ***
[ 1.213016]
[ 1.213143] May be due to missing lock nesting notation
[ 1.213143]
[ 1.213294] 3 locks held by ip/184:
[ 1.213371] #0: ffffffff838b53e0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x1b/0xa0
[ 1.213543] #1: ffffffff84e5fc70 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x37/0xa0
[ 1.213727] #2: ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[ 1.213895]
[ 1.213895] stack backtrace:
[ 1.213991] CPU: 0 UID: 0 PID: 184 Comm: ip Not tainted 6.14.0-rc5-01215-g032756b4ca7a-dirty #5
[ 1.213993] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 1.213994] Call Trace:
[ 1.213995] <TASK>
[ 1.213996] dump_stack_lvl+0x8e/0xd0
[ 1.214000] print_deadlock_bug+0x28b/0x2a0
[ 1.214020] lock_acquire+0xea/0x2a0
[ 1.214027] __mutex_lock+0xbf/0xd40
[ 1.214038] dev_set_allmulti+0x4e/0xb0 # real_dev->flags & IFF_ALLMULTI
[ 1.214040] vlan_dev_open+0xa5/0x170 # ndo_open on vlandev
[ 1.214042] __dev_open+0x145/0x270
[ 1.214046] __dev_change_flags+0xb0/0x1e0
[ 1.214051] netif_change_flags+0x22/0x60 # IFF_UP vlandev
[ 1.214053] dev_change_flags+0x61/0xb0 # for each device in group from dev->vlan_info
[ 1.214055] vlan_device_event+0x766/0x7c0 # on netdevsim0
[ 1.214058] notifier_call_chain+0x78/0x120
[ 1.214062] netif_open+0x6d/0x90
[ 1.214064] dev_open+0x5b/0xb0 # locks netdevsim0
[ 1.214066] bond_enslave+0x64c/0x1230
[ 1.214075] do_set_master+0x175/0x1e0 # on netdevsim0
[ 1.214077] do_setlink+0x516/0x13b0
[ 1.214094] rtnl_newlink+0xaba/0xb80
[ 1.214132] rtnetlink_rcv_msg+0x440/0x490
[ 1.214144] netlink_rcv_skb+0xeb/0x120
[ 1.214150] netlink_unicast+0x1f9/0x320
[ 1.214153] netlink_sendmsg+0x346/0x3f0
[ 1.214157] __sock_sendmsg+0x86/0xb0
[ 1.214160] ____sys_sendmsg+0x1c8/0x220
[ 1.214164] ___sys_sendmsg+0x28f/0x2d0
[ 1.214179] __x64_sys_sendmsg+0xef/0x140
[ 1.214184] do_syscall_64+0xec/0x1d0
[ 1.214190] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 1.214191] RIP: 0033:0x7f2d1b4a7e56
Device setup:
netdevsim0 (down)
^ ^
bond netdevsim1.100@netdevsim1 allmulticast=on (down)
When we enslave the lower device (netdevsim0) which has a vlan, we
propagate vlan's allmuti/promisc flags during ndo_open. This causes
(re)locking on of the real_dev.
Propagate allmulti/promisc on flags change, not on the open. There
is a slight semantics change that vlans that are down now propagate
the flags, but this seems unlikely to result in the real issues.
Reproducer:
echo 0 1 > /sys/bus/netdevsim/new_device
dev_path=$(ls -d /sys/bus/netdevsim/devices/netdevsim0/net/*)
dev=$(echo $dev_path | rev | cut -d/ -f1 | rev)
ip link set dev $dev name netdevsim0
ip link set dev netdevsim0 up
ip link add link netdevsim0 name netdevsim0.100 type vlan id 100
ip link set dev netdevsim0.100 allm
---truncated--- |
