| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check link_index before accessing dc->links[]
[WHY & HOW]
dc->links[] has max size of MAX_LINKS and NULL is return when trying to
access with out-of-bound index.
This fixes 3 OVERRUN and 1 RESOURCE_LEAK issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix index may exceed array range within fpu_update_bw_bounding_box
[Why]
Coverity reports OVERRUN warning. soc.num_states could
be 40. But array range of bw_params->clk_table.entries is 8.
[How]
Assert if soc.num_states greater than 8. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add missing NULL pointer check within dpcd_extend_address_range
[Why & How]
ASSERT if return NULL from kcalloc. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Run DC_LOG_DC after checking link->link_enc
[WHAT]
The DC_LOG_DC should be run after link->link_enc is checked, not before.
This fixes 1 REVERSE_INULL issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Validate function returns
[WHAT & HOW]
Function return values must be checked before data can be used
in subsequent functions.
This fixes 4 CHECKED_RETURN issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Ensure array index tg_inst won't be -1
[WHY & HOW]
tg_inst will be a negative if timing_generator_count equals 0, which
should be checked before used.
This fixes 2 OVERRUN issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check index for aux_rd_interval before using
aux_rd_interval has size of 7 and should be checked.
This fixes 3 OVERRUN and 1 INTEGER_OVERFLOW issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add otg_master NULL check within resource_log_pipe_topology_update
[Why]
Coverity reports NULL_RETURN warning.
[How]
Add otg_master NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on F2FS_INLINE_DATA flag in inode during GC
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/inline.c:258!
CPU: 1 PID: 34 Comm: kworker/u8:2 Not tainted 6.9.0-rc6-syzkaller-00012-g9e4bc4bcae01 #0
RIP: 0010:f2fs_write_inline_data+0x781/0x790 fs/f2fs/inline.c:258
Call Trace:
f2fs_write_single_data_page+0xb65/0x1d60 fs/f2fs/data.c:2834
f2fs_write_cache_pages fs/f2fs/data.c:3133 [inline]
__f2fs_write_data_pages fs/f2fs/data.c:3288 [inline]
f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3315
do_writepages+0x35b/0x870 mm/page-writeback.c:2612
__writeback_single_inode+0x165/0x10b0 fs/fs-writeback.c:1650
writeback_sb_inodes+0x905/0x1260 fs/fs-writeback.c:1941
wb_writeback+0x457/0xce0 fs/fs-writeback.c:2117
wb_do_writeback fs/fs-writeback.c:2264 [inline]
wb_workfn+0x410/0x1090 fs/fs-writeback.c:2304
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0xa12/0x17c0 kernel/workqueue.c:3335
worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
kthread+0x2f2/0x390 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
The root cause is: inline_data inode can be fuzzed, so that there may
be valid blkaddr in its direct node, once f2fs triggers background GC
to migrate the block, it will hit f2fs_bug_on() during dirty page
writeback.
Let's add sanity check on F2FS_INLINE_DATA flag in inode during GC,
so that, it can forbid migrating inline_data inode's data block for
fixing. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to cover read extent cache access with lock
syzbot reports a f2fs bug as below:
BUG: KASAN: slab-use-after-free in sanity_check_extent_cache+0x370/0x410 fs/f2fs/extent_cache.c:46
Read of size 4 at addr ffff8880739ab220 by task syz-executor200/5097
CPU: 0 PID: 5097 Comm: syz-executor200 Not tainted 6.9.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
sanity_check_extent_cache+0x370/0x410 fs/f2fs/extent_cache.c:46
do_read_inode fs/f2fs/inode.c:509 [inline]
f2fs_iget+0x33e1/0x46e0 fs/f2fs/inode.c:560
f2fs_nfs_get_inode+0x74/0x100 fs/f2fs/super.c:3237
generic_fh_to_dentry+0x9f/0xf0 fs/libfs.c:1413
exportfs_decode_fh_raw+0x152/0x5f0 fs/exportfs/expfs.c:444
exportfs_decode_fh+0x3c/0x80 fs/exportfs/expfs.c:584
do_handle_to_path fs/fhandle.c:155 [inline]
handle_to_path fs/fhandle.c:210 [inline]
do_handle_open+0x495/0x650 fs/fhandle.c:226
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
We missed to cover sanity_check_extent_cache() w/ extent cache lock,
so, below race case may happen, result in use after free issue.
- f2fs_iget
- do_read_inode
- f2fs_init_read_extent_tree
: add largest extent entry in to cache
- shrink
- f2fs_shrink_read_extent_tree
- __shrink_extent_tree
- __detach_extent_node
: drop largest extent entry
- sanity_check_extent_cache
: access et->largest w/o lock
let's refactor sanity_check_extent_cache() to avoid extent cache access
and call it before f2fs_init_read_extent_tree() to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL pointer dereference for DTN log in DCN401
When users run the command:
cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log
The following NULL pointer dereference happens:
[ +0.000003] BUG: kernel NULL pointer dereference, address: NULL
[ +0.000005] #PF: supervisor instruction fetch in kernel mode
[ +0.000002] #PF: error_code(0x0010) - not-present page
[ +0.000002] PGD 0 P4D 0
[ +0.000004] Oops: 0010 [#1] PREEMPT SMP NOPTI
[ +0.000003] RIP: 0010:0x0
[ +0.000008] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[...]
[ +0.000002] PKRU: 55555554
[ +0.000002] Call Trace:
[ +0.000002] <TASK>
[ +0.000003] ? show_regs+0x65/0x70
[ +0.000006] ? __die+0x24/0x70
[ +0.000004] ? page_fault_oops+0x160/0x470
[ +0.000006] ? do_user_addr_fault+0x2b5/0x690
[ +0.000003] ? prb_read_valid+0x1c/0x30
[ +0.000005] ? exc_page_fault+0x8c/0x1a0
[ +0.000005] ? asm_exc_page_fault+0x27/0x30
[ +0.000012] dcn10_log_color_state+0xf9/0x510 [amdgpu]
[ +0.000306] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000003] ? vsnprintf+0x2fb/0x600
[ +0.000009] dcn10_log_hw_state+0xfd0/0xfe0 [amdgpu]
[ +0.000218] ? __mod_memcg_lruvec_state+0xe8/0x170
[ +0.000008] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? debug_smp_processor_id+0x17/0x20
[ +0.000003] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? set_ptes.isra.0+0x2b/0x90
[ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? _raw_spin_unlock+0x19/0x40
[ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? do_anonymous_page+0x337/0x700
[ +0.000004] dtn_log_read+0x82/0x120 [amdgpu]
[ +0.000207] full_proxy_read+0x66/0x90
[ +0.000007] vfs_read+0xb0/0x340
[ +0.000005] ? __count_memcg_events+0x79/0xe0
[ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000003] ? count_memcg_events.constprop.0+0x1e/0x40
[ +0.000003] ? handle_mm_fault+0xb2/0x370
[ +0.000003] ksys_read+0x6b/0xf0
[ +0.000004] __x64_sys_read+0x19/0x20
[ +0.000003] do_syscall_64+0x60/0x130
[ +0.000004] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ +0.000003] RIP: 0033:0x7fdf32f147e2
[...]
This error happens when the color log tries to read the gamut remap
information from DCN401 which is not initialized in the dcn401_dpp_funcs
which leads to a null pointer dereference. This commit addresses this
issue by adding a proper guard to access the gamut_remap callback in
case the specific ASIC did not implement this function. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: don't set RO when shutting down f2fs
Shutdown does not check the error of thaw_super due to readonly, which
causes a deadlock like below.
f2fs_ioc_shutdown(F2FS_GOING_DOWN_FULLSYNC) issue_discard_thread
- bdev_freeze
- freeze_super
- f2fs_stop_checkpoint()
- f2fs_handle_critical_error - sb_start_write
- set RO - waiting
- bdev_thaw
- thaw_super_locked
- return -EINVAL, if sb_rdonly()
- f2fs_stop_discard_thread
-> wait for kthread_stop(discard_thread); |
| In the Linux kernel, the following vulnerability has been resolved:
bcache: fix variable length array abuse in btree_iter
btree_iter is used in two ways: either allocated on the stack with a
fixed size MAX_BSETS, or from a mempool with a dynamic size based on the
specific cache set. Previously, the struct had a fixed-length array of
size MAX_BSETS which was indexed out-of-bounds for the dynamically-sized
iterators, which causes UBSAN to complain.
This patch uses the same approach as in bcachefs's sort_iter and splits
the iterator into a btree_iter with a flexible array member and a
btree_iter_stack which embeds a btree_iter as well as a fixed-length
data array. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix division by zero in setup_dsc_config
When slice_height is 0, the division by slice_height in the calculation
of the number of slices will cause a division by zero driver crash. This
leaves the kernel in a state that requires a reboot. This patch adds a
check to avoid the division by zero.
The stack trace below is for the 6.8.4 Kernel. I reproduced the issue on
a Z16 Gen 2 Lenovo Thinkpad with a Apple Studio Display monitor
connected via Thunderbolt. The amdgpu driver crashed with this exception
when I rebooted the system with the monitor connected.
kernel: ? die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434 arch/x86/kernel/dumpstack.c:447)
kernel: ? do_trap (arch/x86/kernel/traps.c:113 arch/x86/kernel/traps.c:154)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? do_error_trap (./arch/x86/include/asm/traps.h:58 arch/x86/kernel/traps.c:175)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? exc_divide_error (arch/x86/kernel/traps.c:194 (discriminator 2))
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? asm_exc_divide_error (./arch/x86/include/asm/idtentry.h:548)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: dc_dsc_compute_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1109) amdgpu
After applying this patch, the driver no longer crashes when the monitor
is connected and the system is rebooted. I believe this is the same
issue reported for 3113. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dcn35 8k30 Underflow/Corruption Issue
[why]
odm calculation is missing for pipe split policy determination
and cause Underflow/Corruption issue.
[how]
Add the odm calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix MST Null Ptr for RV
The change try to fix below error specific to RV platform:
BUG: kernel NULL pointer dereference, address: 0000000000000008
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2
Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022
RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper]
Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8>
RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224
RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280
RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850
R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000
R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224
FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? plist_add+0xbe/0x100
? exc_page_fault+0x7c/0x180
? asm_exc_page_fault+0x26/0x30
? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026]
? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026]
compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
drm_atomic_check_only+0x5c5/0xa40
drm_mode_atomic_ioctl+0x76e/0xbc0
? _copy_to_user+0x25/0x30
? drm_ioctl+0x296/0x4b0
? __pfx_drm_mode_atomic_ioctl+0x10/0x10
drm_ioctl_kernel+0xcd/0x170
drm_ioctl+0x26d/0x4b0
? __pfx_drm_mode_atomic_ioctl+0x10/0x10
amdgpu_drm_ioctl+0x4e/0x90 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
__x64_sys_ioctl+0x94/0xd0
do_syscall_64+0x60/0x90
? do_syscall_64+0x6c/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f4dad17f76f
Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c>
RSP: 002b:00007ffd9ae859f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000055e255a55900 RCX: 00007f4dad17f76f
RDX: 00007ffd9ae85a90 RSI: 00000000c03864bc RDI: 000000000000000b
RBP: 00007ffd9ae85a90 R08: 0000000000000003 R09: 0000000000000003
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c03864bc
R13: 000000000000000b R14: 000055e255a7fc60 R15: 000055e255a01eb0
</TASK>
Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device ccm cmac algif_hash algif_skcipher af_alg joydev mousedev bnep >
typec libphy k10temp ipmi_msghandler roles i2c_scmi acpi_cpufreq mac_hid nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_mas>
CR2: 0000000000000008
---[ end trace 0000000000000000 ]---
RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper]
Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8>
RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224
RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280
RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850
R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000
R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224
FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Avoid NULL dereference of timing generator
[Why & How]
Check whether assigned timing generator is NULL or not before
accessing its funcs to prevent NULL dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Refactor DMCUB enter/exit idle interface
[Why]
We can hang in place trying to send commands when the DMCUB isn't
powered on.
[How]
We need to exit out of the idle state prior to sending a command,
but the process that performs the exit also invokes a command itself.
Fixing this issue involves the following:
1. Using a software state to track whether or not we need to start
the process to exit idle or notify idle.
It's possible for the hardware to have exited an idle state without
driver knowledge, but entering one is always restricted to a driver
allow - which makes the SW state vs HW state mismatch issue purely one
of optimization, which should seldomly be hit, if at all.
2. Refactor any instances of exit/notify idle to use a single wrapper
that maintains this SW state.
This works simialr to dc_allow_idle_optimizations, but works at the
DMCUB level and makes sure the state is marked prior to any notify/exit
idle so we don't enter an infinite loop.
3. Make sure we exit out of idle prior to sending any commands or
waiting for DMCUB idle.
This patch takes care of 1/2. A future patch will take care of wrapping
DMCUB command submission with calls to this new interface. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wake DMCUB before executing GPINT commands
[Why]
DMCUB can be in idle when we attempt to interface with the HW through
the GPINT mailbox resulting in a system hang.
[How]
Add dc_wake_and_execute_gpint() to wrap the wake, execute, sleep
sequence.
If the GPINT executes successfully then DMCUB will be put back into
sleep after the optional response is returned.
It functions similar to the inbox command interface. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to tag gcing flag on page during block migration
It needs to add missing gcing flag on page during block migration,
in order to garantee migrated data be persisted during checkpoint,
otherwise out-of-order persistency between data and node may cause
data corruption after SPOR.
Similar issue was fixed by commit 2d1fe8a86bf5 ("f2fs: fix to tag
gcing flag on page during file defragment"). |
