| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Rockstar Games Launcher 1.0.37.349 contains a privilege escalation vulnerability that allows authenticated users to modify the service executable with weak permissions. Attackers can replace the RockstarService.exe with a malicious binary to create a new administrator user and gain elevated system access. |
| Genexis Platinum-4410 P4410-V2-1.31A contains a stored cross-site scripting vulnerability in the 'start_addr' parameter of the Security Management interface. Attackers can inject malicious scripts through the start source address field that will persist and trigger for privileged users when they access the security management page. |
| GetSimple CMS My SMTP Contact Plugin 1.1.2 suffers from a Stored Cross-Site Scripting (XSS) vulnerability. The plugin attempts to sanitize user input using htmlspecialchars(), but this can be bypassed by passing dangerous characters as escaped hex bytes. This allows attackers to inject arbitrary client-side code that executes in the administrator's browser when visiting a malicious page. |
| GeoGebra Graphing Calculator 6.0.631.0 contains a denial of service vulnerability that allows attackers to crash the application by inputting an oversized buffer. Attackers can generate a payload of 8000 repeated characters to overwhelm the input field and cause the application to become unresponsive. |
| Realtek Wireless LAN Utility 700.1631 contains an unquoted service path vulnerability that allows local users to potentially execute code with elevated system privileges. Attackers can exploit the unquoted service path by inserting malicious code in the system root path that would execute during application startup or system reboot. |
| Sandboxie Plus 0.7.2 contains an unquoted service path vulnerability in the SbieSvc service that allows local attackers to execute code with elevated privileges. Attackers can exploit the unquoted binary path to inject malicious executables that will be launched with LocalSystem permissions during service startup. |
| When passing data to the b64decode(), standard_b64decode(), and urlsafe_b64decode() functions in the "base64" module the characters "+/" will always be accepted, regardless of the value of "altchars" parameter, typically used to establish an "alternative base64 alphabet" such as the URL safe alphabet. This behavior matches what is recommended in earlier base64 RFCs, but newer RFCs now recommend either dropping characters outside the specified base64 alphabet or raising an error. The old behavior has the possibility of causing data integrity issues.
This behavior can only be insecure if your application uses an alternate base64 alphabet (without "+/"). If your application does not use the "altchars" parameter or the urlsafe_b64decode() function, then your application does not use an alternative base64 alphabet.
The attached patches DOES NOT make the base64-decode behavior raise an error, as this would be a change in behavior and break existing programs. Instead, the patch deprecates the behavior which will be replaced with the newly recommended behavior in a future version of Python. Users are recommended to mitigate by verifying user-controlled inputs match the base64
alphabet they are expecting or verify that their application would not be
affected if the b64decode() functions accepted "+" or "/" outside of altchars. |
| Altium Designer version 24.9.0 does not validate self-signed server certificates for cloud connections. An attacker capable of performing a man-in-the-middle (MITM) attack could exploit this issue to intercept or manipulate network traffic, potentially exposing authentication credentials or sensitive design data. |
| EVerest is an EV charging software stack. In all versions up to and including 2025.12.1, the default value for `terminate_connection_on_failed_response` is `False`, which leaves the responsibility for session and connection termination to the EV. In this configuration, any errors encountered by the module are logged but do not trigger countermeasures such as session and connection reset or termination. This could be abused by a malicious user in order to exploit other weaknesses or vulnerabilities. While the default will stay at the setting that is described as potentially problematic in this reported issue, a mitigation is available by changing the `terminate_connection_on_failed_response` setting to `true`. However this cannot be set to this value by default since it can trigger errors in vehicle ECUs requiring ECU resets and lengthy unavailability in charging for vehicles. The maintainers judge this to be a much more important workaround then short-term unavailability of an EVSE, therefore this setting will stay at the current value. |
| EVerest is an EV charging software stack. Prior to version 2025.9.0, once the validity of the received V2G message has been verified, it is checked whether the submitted session ID matches the registered one. However, if no session has been registered, the default value is 0. Therefore, a message submitted with a session ID of 0 is accepted, as it matches the registered value. This could allow unauthorized and anonymous indirect emission of MQTT messages and communication with V2G messages handlers, updating a session context. Version 2025.9.0 fixes the issue. |
| ArduinoCore-avr contains the source code and configuration files of the Arduino AVR Boards platform. A vulnerability in versions prior to 1.8.7 allows an attacker to trigger a stack-based buffer overflow when converting floating-point values to strings with high precision. By passing very large `decimalPlaces` values to the affected String constructors or concat methods, the `dtostrf` function writes beyond fixed-size stack buffers, causing memory corruption and denial of service. Under specific conditions, this could enable arbitrary code execution on AVR-based Arduino boards.
### Patches
- The Fix is included starting from the `1.8.7` release available from the following link [ArduinoCore-avr v1.8.7](https://github.com/arduino/ArduinoCore-avr)
- The Fixing Commit is available at the following link [1a6a417f89c8901dad646efce74ae9d3ddebfd59](https://github.com/arduino/ArduinoCore-avr/pull/613/commits/1a6a417f89c8901dad646efce74ae9d3ddebfd59)
### References
- [ASEC-26-001 ArduinoCore-avr vXXXX Resolves Buffer Overflow Vulnerability](https://support.arduino.cc/hc/en-us/articles/XXXXX)
### Credits
- Maxime Rossi Bellom and Ramtine Tofighi Shirazi from SecMate (https://secmate.dev/) |
| Tenda AX-1803 v1.0.0.1 was discovered to contain a stack overflow in the ssid parameter of the form_fast_setting_wifi_set function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Logic vulnerability in TP-Link Archer C20 v6.0 and Archer AX53 v1.0 (TDDP module) allows unauthenticated adjacent attackers to execute administrative commands including factory reset and device reboot without credentials. Attackers on the adjacent network can remotely trigger factory resets and reboots without credentials, causing configuration loss and interruption of device availability.This issue affects Archer C20 v6.0 < V6_251031.
Archer AX53 v1.0 <
V1_251215 |
| Multiple vulnerabilities in the web-based management interface of Cisco Packaged Contact Center Enterprise (Packaged CCE) and Cisco Unified Contact Center Enterprise (Unified CCE) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device.
These vulnerabilities exist because the web-based management interface does not properly validate user-supplied input. An attacker could exploit these vulnerabilities by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, the attacker must have valid administrative credentials. |
| ManageIQ is an open-source management platform. A flaw was found in the ManageIQ API prior to version radjabov-2 where a malformed TimeProfile could be created causing later UI and API requests to timeout leading to a Denial of Service. Version radjabov-2 contains a patch. One may also apply the patch manually. |
| External Secrets Operator reads information from a third-party service and automatically injects the values as Kubernetes Secrets. Starting in version 0.20.2 and prior to version 1.2.0, the `getSecretKey` template function, while introduced for senhasegura Devops Secrets Management (DSM) provider, has the ability to fetch secrets cross-namespaces with the roleBinding of the external-secrets controller, bypassing our security mechanisms. This function was completely removed in version 1.2.0, as everything done with that templating function can be done in a different way while respecting External Secrets Operator's safeguards As a workaround, use a policy engine such as Kubernetes, Kyverno, Kubewarden, or OPA to prevent the usage of `getSecretKey` in any ExternalSecret resource. |
| Fleet is open source device management software. A broken access control issue in versions prior to 4.78.3, 4.77.1, 4.76.2, 4.75.2, and 4.53.3 allowed authenticated users to access debug and profiling endpoints regardless of role. As a result, low-privilege users could view internal server diagnostics and trigger resource-intensive profiling operations. Fleet’s debug/pprof endpoints are accessible to any authenticated user regardless of role, including the lowest-privilege “Observer” role. This allows low-privilege users to access sensitive server internals, including runtime profiling data and in-memory application state, and to trigger CPU-intensive profiling operations that could lead to denial of service. Versions 4.78.3, 4.77.1, 4.76.2, 4.75.2, and 4.53.3 fix the issue. If an immediate upgrade is not possible, users should put the debug/pprof endpoints behind an IP allowlist as a workaround. |
| D-Link D-View 8 versions 2.0.1.107 and below contain an uncontrolled search path vulnerability in the installer. When executed with elevated privileges via UAC, the installer attempts to load version.dll from its execution directory, allowing DLL preloading. An attacker can supply a malicious version.dll alongside the legitimate installer so that, when a victim runs the installer and approves the UAC prompt, attacker-controlled code executes with administrator privileges. This can lead to full system compromise. |
| hustoj is an open source online judge based on PHP/C++/MySQL/Linux for ACM/ICPC and NOIP training. All versions are vulnerable to CSV Injection (Formula Injection) through the contest rank export functionality (contestrank.xls.php and admin/ranklist_export.php). The application fails to sanitize user-supplied input (specifically the "Nickname" field) before exporting it to an .xls file (which renders as an HTML table but is opened by Excel). If a malicious user sets their nickname to an Excel formula when an administrator exports and opens the rank list in Microsoft Excel, the formula will be executed. This can lead to arbitrary command execution (RCE) on the administrator's machine or data exfiltration. A fix was not available at the time of publication. |
| Tendenci is an open source content management system built for non-profits, associations and cause-based sites. Versions 15.3.11 and below include a critical deserialization vulnerability in the Helpdesk module (which is not enabled by default). This vulnerability allows Remote Code Execution (RCE) by an authenticated user with staff security level due to using Python's pickle module in helpdesk /reports/. The original CVE-2020-14942 was incompletely patched. While ticket_list() was fixed to use safe JSON deserialization, the run_report() function still uses unsafe pickle.loads(). The impact is limited to the permissions of the user running the application, typically www-data, which generally lacks write (except for upload directories) and execute permissions. This issue has been fixed in version 15.3.12. |
