| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: ops: Fix bounds check for _sx controls
For _sx controls the semantics of the max field is not the usual one, max
is the number of steps rather than the maximum value. This means that our
check in snd_soc_put_volsw_sx() needs to just check against the maximum
value. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mt7621: Add sentinel to quirks table
Current driver is missing a sentinel in the struct soc_device_attribute
array, which causes an oops when assessed by the
soc_device_match(mt7621_pcie_quirks_match) call.
This was only exposed once the CONFIG_SOC_MT7621 mt7621 soc_dev_attr
was fixed to register the SOC as a device, in:
commit 7c18b64bba3b ("mips: ralink: mt7621: do not use kzalloc too early")
Fix it by adding the required sentinel. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: Correctly set DATA_FIN timeout when number of retransmits is large
Syzkaller with UBSAN uncovered a scenario where a large number of
DATA_FIN retransmits caused a shift-out-of-bounds in the DATA_FIN
timeout calculation:
================================================================================
UBSAN: shift-out-of-bounds in net/mptcp/protocol.c:470:29
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 1 PID: 13059 Comm: kworker/1:0 Not tainted 5.17.0-rc2-00630-g5fbf21c90c60 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Workqueue: events mptcp_worker
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
ubsan_epilogue+0xb/0x5a lib/ubsan.c:151
__ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e lib/ubsan.c:330
mptcp_set_datafin_timeout net/mptcp/protocol.c:470 [inline]
__mptcp_retrans.cold+0x72/0x77 net/mptcp/protocol.c:2445
mptcp_worker+0x58a/0xa70 net/mptcp/protocol.c:2528
process_one_work+0x9df/0x16d0 kernel/workqueue.c:2307
worker_thread+0x95/0xe10 kernel/workqueue.c:2454
kthread+0x2f4/0x3b0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
================================================================================
This change limits the maximum timeout by limiting the size of the
shift, which keeps all intermediate values in-bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
net: amd-xgbe: Fix skb data length underflow
There will be BUG_ON() triggered in include/linux/skbuff.h leading to
intermittent kernel panic, when the skb length underflow is detected.
Fix this by dropping the packet if such length underflows are seen
because of inconsistencies in the hardware descriptors. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: nullify cq->dbg pointer in mlx5_debug_cq_remove()
Prior to this patch in case mlx5_core_destroy_cq() failed it proceeds
to rest of destroy operations. mlx5_core_destroy_cq() could be called again
by user and cause additional call of mlx5_debug_cq_remove().
cq->dbg was not nullify in previous call and cause the crash.
Fix it by nullify cq->dbg pointer after removal.
Also proceed to destroy operations only if FW return 0
for MLX5_CMD_OP_DESTROY_CQ command.
general protection fault, probably for non-canonical address 0x2000300004058: 0000 [#1] SMP PTI
CPU: 5 PID: 1228 Comm: python Not tainted 5.15.0-rc5_for_upstream_min_debug_2021_10_14_11_06 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:lockref_get+0x1/0x60
Code: 5d e9 53 ff ff ff 48 8d 7f 70 e8 0a 2e 48 00 c7 85 d0 00 00 00 02
00 00 00 c6 45 70 00 fb 5d c3 c3 cc cc cc cc cc cc cc cc 53 <48> 8b 17
48 89 fb 85 d2 75 3d 48 89 d0 bf 64 00 00 00 48 89 c1 48
RSP: 0018:ffff888137dd7a38 EFLAGS: 00010206
RAX: 0000000000000000 RBX: ffff888107d5f458 RCX: 00000000fffffffe
RDX: 000000000002c2b0 RSI: ffffffff8155e2e0 RDI: 0002000300004058
RBP: ffff888137dd7a88 R08: 0002000300004058 R09: ffff8881144a9f88
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881141d4000
R13: ffff888137dd7c68 R14: ffff888137dd7d58 R15: ffff888137dd7cc0
FS: 00007f4644f2a4c0(0000) GS:ffff8887a2d40000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b4500f4380 CR3: 0000000114f7a003 CR4: 0000000000170ea0
Call Trace:
simple_recursive_removal+0x33/0x2e0
? debugfs_remove+0x60/0x60
debugfs_remove+0x40/0x60
mlx5_debug_cq_remove+0x32/0x70 [mlx5_core]
mlx5_core_destroy_cq+0x41/0x1d0 [mlx5_core]
devx_obj_cleanup+0x151/0x330 [mlx5_ib]
? __pollwait+0xd0/0xd0
? xas_load+0x5/0x70
? xa_load+0x62/0xa0
destroy_hw_idr_uobject+0x20/0x80 [ib_uverbs]
uverbs_destroy_uobject+0x3b/0x360 [ib_uverbs]
uobj_destroy+0x54/0xa0 [ib_uverbs]
ib_uverbs_cmd_verbs+0xaf2/0x1160 [ib_uverbs]
? uverbs_finalize_object+0xd0/0xd0 [ib_uverbs]
ib_uverbs_ioctl+0xc4/0x1b0 [ib_uverbs]
__x64_sys_ioctl+0x3e4/0x8e0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix wild memory access when clearing fragments
while testing re-assembly/re-fragmentation using act_ct, it's possible to
observe a crash like the following one:
KASAN: maybe wild-memory-access in range [0x0001000000000448-0x000100000000044f]
CPU: 50 PID: 0 Comm: swapper/50 Tainted: G S 5.12.0-rc7+ #424
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
RIP: 0010:inet_frag_rbtree_purge+0x50/0xc0
Code: 00 fc ff df 48 89 c3 31 ed 48 89 df e8 a9 7a 38 ff 4c 89 fe 48 89 df 49 89 c6 e8 5b 3a 38 ff 48 8d 7b 40 48 89 f8 48 c1 e8 03 <42> 80 3c 20 00 75 59 48 8d bb d0 00 00 00 4c 8b 6b 40 48 89 f8 48
RSP: 0018:ffff888c31449db8 EFLAGS: 00010203
RAX: 0000200000000089 RBX: 000100000000040e RCX: ffffffff989eb960
RDX: 0000000000000140 RSI: ffffffff97cfb977 RDI: 000100000000044e
RBP: 0000000000000900 R08: 0000000000000000 R09: ffffed1186289350
R10: 0000000000000003 R11: ffffed1186289350 R12: dffffc0000000000
R13: 000100000000040e R14: 0000000000000000 R15: ffff888155e02160
FS: 0000000000000000(0000) GS:ffff888c31440000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005600cb70a5b8 CR3: 0000000a2c014005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
inet_frag_destroy+0xa9/0x150
call_timer_fn+0x2d/0x180
run_timer_softirq+0x4fe/0xe70
__do_softirq+0x197/0x5a0
irq_exit_rcu+0x1de/0x200
sysvec_apic_timer_interrupt+0x6b/0x80
</IRQ>
when act_ct temporarily stores an IP fragment, restoring the skb qdisc cb
results in putting random data in FRAG_CB(), and this causes those "wild"
memory accesses later, when the rbtree is purged. Never overwrite the skb
cb in case tcf_ct_handle_fragments() returns -EINPROGRESS. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: fix stack OOB read while fragmenting IPv4 packets
running openvswitch on kernels built with KASAN, it's possible to see the
following splat while testing fragmentation of IPv4 packets:
BUG: KASAN: stack-out-of-bounds in ip_do_fragment+0x1b03/0x1f60
Read of size 1 at addr ffff888112fc713c by task handler2/1367
CPU: 0 PID: 1367 Comm: handler2 Not tainted 5.12.0-rc6+ #418
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
Call Trace:
dump_stack+0x92/0xc1
print_address_description.constprop.7+0x1a/0x150
kasan_report.cold.13+0x7f/0x111
ip_do_fragment+0x1b03/0x1f60
ovs_fragment+0x5bf/0x840 [openvswitch]
do_execute_actions+0x1bd5/0x2400 [openvswitch]
ovs_execute_actions+0xc8/0x3d0 [openvswitch]
ovs_packet_cmd_execute+0xa39/0x1150 [openvswitch]
genl_family_rcv_msg_doit.isra.15+0x227/0x2d0
genl_rcv_msg+0x287/0x490
netlink_rcv_skb+0x120/0x380
genl_rcv+0x24/0x40
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f957079db07
Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 eb ec ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 24 ed ff ff 48
RSP: 002b:00007f956ce35a50 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000019 RCX: 00007f957079db07
RDX: 0000000000000000 RSI: 00007f956ce35ae0 RDI: 0000000000000019
RBP: 00007f956ce35ae0 R08: 0000000000000000 R09: 00007f9558006730
R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
R13: 00007f956ce37308 R14: 00007f956ce35f80 R15: 00007f956ce35ae0
The buggy address belongs to the page:
page:00000000af2a1d93 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x112fc7
flags: 0x17ffffc0000000()
raw: 0017ffffc0000000 0000000000000000 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
addr ffff888112fc713c is located in stack of task handler2/1367 at offset 180 in frame:
ovs_fragment+0x0/0x840 [openvswitch]
this frame has 2 objects:
[32, 144) 'ovs_dst'
[192, 424) 'ovs_rt'
Memory state around the buggy address:
ffff888112fc7000: f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888112fc7080: 00 f1 f1 f1 f1 00 00 00 00 00 00 00 00 00 00 00
>ffff888112fc7100: 00 00 00 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00
^
ffff888112fc7180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888112fc7200: 00 00 00 00 00 00 f2 f2 f2 00 00 00 00 00 00 00
for IPv4 packets, ovs_fragment() uses a temporary struct dst_entry. Then,
in the following call graph:
ip_do_fragment()
ip_skb_dst_mtu()
ip_dst_mtu_maybe_forward()
ip_mtu_locked()
the pointer to struct dst_entry is used as pointer to struct rtable: this
turns the access to struct members like rt_mtu_locked into an OOB read in
the stack. Fix this changing the temporary variable used for IPv4 packets
in ovs_fragment(), similarly to what is done for IPv6 few lines below. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/cpufreq_cooling: Fix slab OOB issue
Slab OOB issue is scanned by KASAN in cpu_power_to_freq().
If power is limited below the power of OPP0 in EM table,
it will cause slab out-of-bound issue with negative array
index.
Return the lowest frequency if limited power cannot found
a suitable OPP in EM table to fix this issue.
Backtrace:
[<ffffffd02d2a37f0>] die+0x104/0x5ac
[<ffffffd02d2a5630>] bug_handler+0x64/0xd0
[<ffffffd02d288ce4>] brk_handler+0x160/0x258
[<ffffffd02d281e5c>] do_debug_exception+0x248/0x3f0
[<ffffffd02d284488>] el1_dbg+0x14/0xbc
[<ffffffd02d75d1d4>] __kasan_report+0x1dc/0x1e0
[<ffffffd02d75c2e0>] kasan_report+0x10/0x20
[<ffffffd02d75def8>] __asan_report_load8_noabort+0x18/0x28
[<ffffffd02e6fce5c>] cpufreq_power2state+0x180/0x43c
[<ffffffd02e6ead80>] power_actor_set_power+0x114/0x1d4
[<ffffffd02e6fac24>] allocate_power+0xaec/0xde0
[<ffffffd02e6f9f80>] power_allocator_throttle+0x3ec/0x5a4
[<ffffffd02e6ea888>] handle_thermal_trip+0x160/0x294
[<ffffffd02e6edd08>] thermal_zone_device_check+0xe4/0x154
[<ffffffd02d351cb4>] process_one_work+0x5e4/0xe28
[<ffffffd02d352f44>] worker_thread+0xa4c/0xfac
[<ffffffd02d360124>] kthread+0x33c/0x358
[<ffffffd02d289940>] ret_from_fork+0xc/0x18 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
Flexible-array member `hws` in `struct clk_hw_onecell_data` is annotated
with the `counted_by()` attribute. This means that when memory is
allocated for this array, the _counter_, which in this case is member
`num` in the flexible structure, should be set to the maximum number of
elements the flexible array can contain, or fewer.
In this case, the total number of elements for the flexible array is
determined by variable `clks_num` when allocating heap space via
`devm_kzalloc()`, as shown below:
289 struct loongson2_clk_provider *clp;
...
296 for (p = data; p->name; p++)
297 clks_num++;
298
299 clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num),
300 GFP_KERNEL);
So, `clp->clk_data.num` should be set to `clks_num` or less, and not
exceed `clks_num`, as is currently the case. Otherwise, if data is
written into `clp->clk_data.hws[clks_num]`, the instrumentation
provided by the compiler won't detect the overflow, leading to a
memory corruption bug at runtime.
Fix this issue by setting `clp->clk_data.num` to `clks_num`. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: glink: fix off-by-one in connector_status
UCSI connector's indices start from 1 up to 3, PMIC_GLINK_MAX_PORTS.
Correct the condition in the pmic_glink_ucsi_connector_status()
callback, fixing Type-C orientation reporting for the third USB-C
connector. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix overflow in oa batch buffer
By default xe_bb_create_job() appends a MI_BATCH_BUFFER_END to batch
buffer, this is not a problem if batch buffer is only used once but
oa reuses the batch buffer for the same metric and at each call
it appends a MI_BATCH_BUFFER_END, printing the warning below and then
overflowing.
[ 381.072016] ------------[ cut here ]------------
[ 381.072019] xe 0000:00:02.0: [drm] Assertion `bb->len * 4 + bb_prefetch(q->gt) <= size` failed!
platform: LUNARLAKE subplatform: 1
graphics: Xe2_LPG / Xe2_HPG 20.04 step B0
media: Xe2_LPM / Xe2_HPM 20.00 step B0
tile: 0 VRAM 0 B
GT: 0 type 1
So here checking if batch buffer already have MI_BATCH_BUFFER_END if
not append it.
v2:
- simply fix, suggestion from Ashutosh
(cherry picked from commit 9ba0e0f30ca42a98af3689460063edfb6315718a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Increase array size of dummy_boolean
[WHY]
dml2_core_shared_mode_support and dml_core_mode_support access the third
element of dummy_boolean, i.e. hw_debug5 = &s->dummy_boolean[2], when
dummy_boolean has size of 2. Any assignment to hw_debug5 causes an
OVERRUN.
[HOW]
Increase dummy_boolean's array size to 3.
This fixes 2 OVERRUN issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix array out-of-bound access in SoC stats
Currently, the ath12k_soc_dp_stats::hal_reo_error array is defined with a
maximum size of DP_REO_DST_RING_MAX. However, the ath12k_dp_rx_process()
function access ath12k_soc_dp_stats::hal_reo_error using the REO
destination SRNG ring ID, which is incorrect. SRNG ring ID differ from
normal ring ID, and this usage leads to out-of-bounds array access. To
fix this issue, modify ath12k_dp_rx_process() to use the normal ring ID
directly instead of the SRNG ring ID to avoid out-of-bounds array access.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a sdiv overflow issue
Zac Ecob reported a problem where a bpf program may cause kernel crash due
to the following error:
Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI
The failure is due to the below signed divide:
LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808.
LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808,
but it is impossible since for 64-bit system, the maximum positive
number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will
cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is
LLONG_MIN.
Further investigation found all the following sdiv/smod cases may trigger
an exception when bpf program is running on x86_64 platform:
- LLONG_MIN/-1 for 64bit operation
- INT_MIN/-1 for 32bit operation
- LLONG_MIN%-1 for 64bit operation
- INT_MIN%-1 for 32bit operation
where -1 can be an immediate or in a register.
On arm64, there are no exceptions:
- LLONG_MIN/-1 = LLONG_MIN
- INT_MIN/-1 = INT_MIN
- LLONG_MIN%-1 = 0
- INT_MIN%-1 = 0
where -1 can be an immediate or in a register.
Insn patching is needed to handle the above cases and the patched codes
produced results aligned with above arm64 result. The below are pseudo
codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0
and the divisor is stored in a register.
sdiv:
tmp = rX
tmp += 1 /* [-1, 0] -> [0, 1]
if tmp >(unsigned) 1 goto L2
if tmp == 0 goto L1
rY = 0
L1:
rY = -rY;
goto L3
L2:
rY /= rX
L3:
smod:
tmp = rX
tmp += 1 /* [-1, 0] -> [0, 1]
if tmp >(unsigned) 1 goto L1
if tmp == 1 (is64 ? goto L2 : goto L3)
rY = 0;
goto L2
L1:
rY %= rX
L2:
goto L4 // only when !is64
L3:
wY = wY // only when !is64
L4:
[1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix off by one issue in alloc_flex_gd()
Wesley reported an issue:
==================================================================
EXT4-fs (dm-5): resizing filesystem from 7168 to 786432 blocks
------------[ cut here ]------------
kernel BUG at fs/ext4/resize.c:324!
CPU: 9 UID: 0 PID: 3576 Comm: resize2fs Not tainted 6.11.0+ #27
RIP: 0010:ext4_resize_fs+0x1212/0x12d0
Call Trace:
__ext4_ioctl+0x4e0/0x1800
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0x99/0xd0
x64_sys_call+0x1206/0x20d0
do_syscall_64+0x72/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
While reviewing the patch, Honza found that when adjusting resize_bg in
alloc_flex_gd(), it was possible for flex_gd->resize_bg to be bigger than
flexbg_size.
The reproduction of the problem requires the following:
o_group = flexbg_size * 2 * n;
o_size = (o_group + 1) * group_size;
n_group: [o_group + flexbg_size, o_group + flexbg_size * 2)
o_size = (n_group + 1) * group_size;
Take n=0,flexbg_size=16 as an example:
last:15
|o---------------|--------------n-|
o_group:0 resize to n_group:30
The corresponding reproducer is:
img=test.img
rm -f $img
truncate -s 600M $img
mkfs.ext4 -F $img -b 1024 -G 16 8M
dev=`losetup -f --show $img`
mkdir -p /tmp/test
mount $dev /tmp/test
resize2fs $dev 248M
Delete the problematic plus 1 to fix the issue, and add a WARN_ON_ONCE()
to prevent the issue from happening again.
[ Note: another reproucer which this commit fixes is:
img=test.img
rm -f $img
truncate -s 25MiB $img
mkfs.ext4 -b 4096 -E nodiscard,lazy_itable_init=0,lazy_journal_init=0 $img
truncate -s 3GiB $img
dev=`losetup -f --show $img`
mkdir -p /tmp/test
mount $dev /tmp/test
resize2fs $dev 3G
umount $dev
losetup -d $dev
-- TYT ] |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: send: fix buffer overflow detection when copying path to cache entry
Starting with commit c0247d289e73 ("btrfs: send: annotate struct
name_cache_entry with __counted_by()") we annotated the variable length
array "name" from the name_cache_entry structure with __counted_by() to
improve overflow detection. However that alone was not correct, because
the length of that array does not match the "name_len" field - it matches
that plus 1 to include the NUL string terminator, so that makes a
fortified kernel think there's an overflow and report a splat like this:
strcpy: detected buffer overflow: 20 byte write of buffer size 19
WARNING: CPU: 3 PID: 3310 at __fortify_report+0x45/0x50
CPU: 3 UID: 0 PID: 3310 Comm: btrfs Not tainted 6.11.0-prnet #1
Hardware name: CompuLab Ltd. sbc-ihsw/Intense-PC2 (IPC2), BIOS IPC2_3.330.7 X64 03/15/2018
RIP: 0010:__fortify_report+0x45/0x50
Code: 48 8b 34 (...)
RSP: 0018:ffff97ebc0d6f650 EFLAGS: 00010246
RAX: 7749924ef60fa600 RBX: ffff8bf5446a521a RCX: 0000000000000027
RDX: 00000000ffffdfff RSI: ffff97ebc0d6f548 RDI: ffff8bf84e7a1cc8
RBP: ffff8bf548574080 R08: ffffffffa8c40e10 R09: 0000000000005ffd
R10: 0000000000000004 R11: ffffffffa8c70e10 R12: ffff8bf551eef400
R13: 0000000000000000 R14: 0000000000000013 R15: 00000000000003a8
FS: 00007fae144de8c0(0000) GS:ffff8bf84e780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fae14691690 CR3: 00000001027a2003 CR4: 00000000001706f0
Call Trace:
<TASK>
? __warn+0x12a/0x1d0
? __fortify_report+0x45/0x50
? report_bug+0x154/0x1c0
? handle_bug+0x42/0x70
? exc_invalid_op+0x1a/0x50
? asm_exc_invalid_op+0x1a/0x20
? __fortify_report+0x45/0x50
__fortify_panic+0x9/0x10
__get_cur_name_and_parent+0x3bc/0x3c0
get_cur_path+0x207/0x3b0
send_extent_data+0x709/0x10d0
? find_parent_nodes+0x22df/0x25d0
? mas_nomem+0x13/0x90
? mtree_insert_range+0xa5/0x110
? btrfs_lru_cache_store+0x5f/0x1e0
? iterate_extent_inodes+0x52d/0x5a0
process_extent+0xa96/0x11a0
? __pfx_lookup_backref_cache+0x10/0x10
? __pfx_store_backref_cache+0x10/0x10
? __pfx_iterate_backrefs+0x10/0x10
? __pfx_check_extent_item+0x10/0x10
changed_cb+0x6fa/0x930
? tree_advance+0x362/0x390
? memcmp_extent_buffer+0xd7/0x160
send_subvol+0xf0a/0x1520
btrfs_ioctl_send+0x106b/0x11d0
? __pfx___clone_root_cmp_sort+0x10/0x10
_btrfs_ioctl_send+0x1ac/0x240
btrfs_ioctl+0x75b/0x850
__se_sys_ioctl+0xca/0x150
do_syscall_64+0x85/0x160
? __count_memcg_events+0x69/0x100
? handle_mm_fault+0x1327/0x15c0
? __se_sys_rt_sigprocmask+0xf1/0x180
? syscall_exit_to_user_mode+0x75/0xa0
? do_syscall_64+0x91/0x160
? do_user_addr_fault+0x21d/0x630
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fae145eeb4f
Code: 00 48 89 (...)
RSP: 002b:00007ffdf1cb09b0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fae145eeb4f
RDX: 00007ffdf1cb0ad0 RSI: 0000000040489426 RDI: 0000000000000004
RBP: 00000000000078fe R08: 00007fae144006c0 R09: 00007ffdf1cb0927
R10: 0000000000000008 R11: 0000000000000246 R12: 00007ffdf1cb1ce8
R13: 0000000000000003 R14: 000055c499fab2e0 R15: 0000000000000004
</TASK>
Fix this by not storing the NUL string terminator since we don't actually
need it for name cache entries, this way "name_len" corresponds to the
actual size of the "name" array. This requires marking the "name" array
field with __nonstring and using memcpy() instead of strcpy() as
recommended by the guidelines at:
https://github.com/KSPP/linux/issues/90 |
| In the Linux kernel, the following vulnerability has been resolved:
powercap: intel_rapl: Fix off by one in get_rpi()
The rp->priv->rpi array is either rpi_msr or rpi_tpmi which have
NR_RAPL_PRIMITIVES number of elements. Thus the > needs to be >=
to prevent an off by one access. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: remove unused C2H event ID RTW89_MAC_C2H_FUNC_READ_WOW_CAM to prevent out-of-bounds reading
The handler of firmware C2H event RTW89_MAC_C2H_FUNC_READ_WOW_CAM isn't
implemented, but driver expects number of handlers is
NUM_OF_RTW89_MAC_C2H_FUNC_WOW causing out-of-bounds access. Fix it by
removing ID.
Addresses-Coverity-ID: 1598775 ("Out-of-bounds read") |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Protect against overflow of ALIGN() during iova allocation
Userspace can supply an iova and uptr such that the target iova alignment
becomes really big and ALIGN() overflows which corrupts the selected area
range during allocation. CONFIG_IOMMUFD_TEST can detect this:
WARNING: CPU: 1 PID: 5092 at drivers/iommu/iommufd/io_pagetable.c:268 iopt_alloc_area_pages drivers/iommu/iommufd/io_pagetable.c:268 [inline]
WARNING: CPU: 1 PID: 5092 at drivers/iommu/iommufd/io_pagetable.c:268 iopt_map_pages+0xf95/0x1050 drivers/iommu/iommufd/io_pagetable.c:352
Modules linked in:
CPU: 1 PID: 5092 Comm: syz-executor294 Not tainted 6.10.0-rc5-syzkaller-00294-g3ffea9a7a6f7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
RIP: 0010:iopt_alloc_area_pages drivers/iommu/iommufd/io_pagetable.c:268 [inline]
RIP: 0010:iopt_map_pages+0xf95/0x1050 drivers/iommu/iommufd/io_pagetable.c:352
Code: fc e9 a4 f3 ff ff e8 1a 8b 4c fc 41 be e4 ff ff ff e9 8a f3 ff ff e8 0a 8b 4c fc 90 0f 0b 90 e9 37 f5 ff ff e8 fc 8a 4c fc 90 <0f> 0b 90 e9 68 f3 ff ff 48 c7 c1 ec 82 ad 8f 80 e1 07 80 c1 03 38
RSP: 0018:ffffc90003ebf9e0 EFLAGS: 00010293
RAX: ffffffff85499fa4 RBX: 00000000ffffffef RCX: ffff888079b49e00
RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000
RBP: ffffc90003ebfc50 R08: ffffffff85499b30 R09: ffffffff85499942
R10: 0000000000000002 R11: ffff888079b49e00 R12: ffff8880228e0010
R13: 0000000000000000 R14: 1ffff920007d7f68 R15: ffffc90003ebfd00
FS: 000055557d760380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000005fdeb8 CR3: 000000007404a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
iommufd_ioas_copy+0x610/0x7b0 drivers/iommu/iommufd/ioas.c:274
iommufd_fops_ioctl+0x4d9/0x5a0 drivers/iommu/iommufd/main.c:421
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Cap the automatic alignment to the huge page size, which is probably a
better idea overall. Huge automatic alignments can fragment and chew up
the available IOVA space without any reason. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fail verification for sign-extension of packet data/data_end/data_meta
syzbot reported a kernel crash due to
commit 1f1e864b6555 ("bpf: Handle sign-extenstin ctx member accesses").
The reason is due to sign-extension of 32-bit load for
packet data/data_end/data_meta uapi field.
The original code looks like:
r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */
r3 = *(u32 *)(r1 + 80) /* load __sk_buff->data_end */
r0 = r2
r0 += 8
if r3 > r0 goto +1
...
Note that __sk_buff->data load has 32-bit sign extension.
After verification and convert_ctx_accesses(), the final asm code looks like:
r2 = *(u64 *)(r1 +208)
r2 = (s32)r2
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
...
Note that 'r2 = (s32)r2' may make the kernel __sk_buff->data address invalid
which may cause runtime failure.
Currently, in C code, typically we have
void *data = (void *)(long)skb->data;
void *data_end = (void *)(long)skb->data_end;
...
and it will generate
r2 = *(u64 *)(r1 +208)
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
If we allow sign-extension,
void *data = (void *)(long)(int)skb->data;
void *data_end = (void *)(long)skb->data_end;
...
the generated code looks like
r2 = *(u64 *)(r1 +208)
r2 <<= 32
r2 s>>= 32
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
and this will cause verification failure since "r2 <<= 32" is not allowed
as "r2" is a packet pointer.
To fix this issue for case
r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */
this patch added additional checking in is_valid_access() callback
function for packet data/data_end/data_meta access. If those accesses
are with sign-extenstion, the verification will fail.
[1] https://lore.kernel.org/bpf/000000000000c90eee061d236d37@google.com/ |
