| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WPDeveloper Essential Addons for Elementor essential-addons-for-elementor-lite allows DOM-Based XSS.This issue affects Essential Addons for Elementor: from n/a through <= 6.5.3. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in Mikado-Themes Lekker lekker allows PHP Local File Inclusion.This issue affects Lekker: from n/a through <= 1.8. |
| Issue summary: Parsing CMS AuthEnvelopedData message with maliciously
crafted AEAD parameters can trigger a stack buffer overflow.
Impact summary: A stack buffer overflow may lead to a crash, causing Denial
of Service, or potentially remote code execution.
When parsing CMS AuthEnvelopedData structures that use AEAD ciphers such as
AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is
copied into a fixed-size stack buffer without verifying that its length fits
the destination. An attacker can supply a crafted CMS message with an
oversized IV, causing a stack-based out-of-bounds write before any
authentication or tag verification occurs.
Applications and services that parse untrusted CMS or PKCS#7 content using
AEAD ciphers (e.g., S/MIME AuthEnvelopedData with AES-GCM) are vulnerable.
Because the overflow occurs prior to authentication, no valid key material
is required to trigger it. While exploitability to remote code execution
depends on platform and toolchain mitigations, the stack-based write
primitive represents a severe risk.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the CMS implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue.
OpenSSL 1.1.1 and 1.0.2 are not affected by this issue. |
| soroban-fixed-point-math is a fixed-point math library for Soroban smart contacts. In versions 1.3.0 and 1.4.0, the `mulDiv(x, y, z)` function incorrectly handled cases where both the intermediate product $x * y$ and the divisor $z$ were negative. The logic assumed that if the intermediate product was negative, the final result must also be negative, neglecting the sign of $z$. This resulted in rounding being applied in the wrong direction for cases where both $x * y$ and $z$ were negative. The functions most at risk are `fixed_div_floor` and `fixed_div_ceil`, as they often use non-constant numbers as the divisor $z$ in `mulDiv`. This error is present in all signed `FixedPoint` and `SorobanFixedPoint` implementations, including `i64`, `i128`, and `I256`. Versions 1.3.1 and 1.4.1 contain a patch. No known workarounds for this issue are available. |
| PHPUnit is a testing framework for PHP. A vulnerability has been discovered in versions prior to 12.5.8, 11.5.50, 10.5.62, 9.6.33, and 8.5.52 involving unsafe deserialization of code coverage data in PHPT test execution. The vulnerability exists in the `cleanupForCoverage()` method, which deserializes code coverage files without validation, potentially allowing remote code execution if malicious `.coverage` files are present prior to the execution of the PHPT test. The vulnerability occurs when a `.coverage` file, which should not exist before test execution, is deserialized without the `allowed_classes` parameter restriction. An attacker with local file write access can place a malicious serialized object with a `__wakeup()` method into the file system, leading to arbitrary code execution during test runs with code coverage instrumentation enabled. This vulnerability requires local file write access to the location where PHPUnit stores or expects code coverage files for PHPT tests. This can occur through CI/CD pipeline attacks, the local development environment, and/or compromised dependencies. Rather than just silently sanitizing the input via `['allowed_classes' => false]`, the maintainer has chosen to make the anomalous state explicit by treating pre-existing `.coverage` files for PHPT tests as an error condition. Starting in versions in versions 12.5.8, 11.5.50, 10.5.62, 9.6.33, when a `.coverage` file is detected for a PHPT test prior to execution, PHPUnit will emit a clear error message identifying the anomalous state. Organizations can reduce the effective risk of this vulnerability through proper CI/CD configuration, including ephemeral runners, code review enforcement, branch protection, artifact isolation, and access control. |
| Issue summary: When using the low-level OCB API directly with AES-NI or<br>other hardware-accelerated code paths, inputs whose length is not a multiple<br>of 16 bytes can leave the final partial block unencrypted and unauthenticated.<br><br>Impact summary: The trailing 1-15 bytes of a message may be exposed in<br>cleartext on encryption and are not covered by the authentication tag,<br>allowing an attacker to read or tamper with those bytes without detection.<br><br>The low-level OCB encrypt and decrypt routines in the hardware-accelerated<br>stream path process full 16-byte blocks but do not advance the input/output<br>pointers. The subsequent tail-handling code then operates on the original<br>base pointers, effectively reprocessing the beginning of the buffer while<br>leaving the actual trailing bytes unprocessed. The authentication checksum<br>also excludes the true tail bytes.<br><br>However, typical OpenSSL consumers using EVP are not affected because the<br>higher-level EVP and provider OCB implementations split inputs so that full<br>blocks and trailing partial blocks are processed in separate calls, avoiding<br>the problematic code path. Additionally, TLS does not use OCB ciphersuites.<br>The vulnerability only affects applications that call the low-level<br>CRYPTO_ocb128_encrypt() or CRYPTO_ocb128_decrypt() functions directly with<br>non-block-aligned lengths in a single call on hardware-accelerated builds.<br>For these reasons the issue was assessed as Low severity.<br><br>The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected<br>by this issue, as OCB mode is not a FIPS-approved algorithm.<br><br>OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue.<br><br>OpenSSL 1.0.2 is not affected by this issue. |
| Issue summary: A TLS 1.3 connection using certificate compression can be
forced to allocate a large buffer before decompression without checking
against the configured certificate size limit.
Impact summary: An attacker can cause per-connection memory allocations of
up to approximately 22 MiB and extra CPU work, potentially leading to
service degradation or resource exhaustion (Denial of Service).
In affected configurations, the peer-supplied uncompressed certificate
length from a CompressedCertificate message is used to grow a heap buffer
prior to decompression. This length is not bounded by the max_cert_list
setting, which otherwise constrains certificate message sizes. An attacker
can exploit this to cause large per-connection allocations followed by
handshake failure. No memory corruption or information disclosure occurs.
This issue only affects builds where TLS 1.3 certificate compression is
compiled in (i.e., not OPENSSL_NO_COMP_ALG) and at least one compression
algorithm (brotli, zlib, or zstd) is available, and where the compression
extension is negotiated. Both clients receiving a server CompressedCertificate
and servers in mutual TLS scenarios receiving a client CompressedCertificate
are affected. Servers that do not request client certificates are not
vulnerable to client-initiated attacks.
Users can mitigate this issue by setting SSL_OP_NO_RX_CERTIFICATE_COMPRESSION
to disable receiving compressed certificates.
The FIPS modules in 3.6, 3.5, 3.4 and 3.3 are not affected by this issue,
as the TLS implementation is outside the OpenSSL FIPS module boundary.
OpenSSL 3.6, 3.5, 3.4 and 3.3 are vulnerable to this issue.
OpenSSL 3.0, 1.1.1 and 1.0.2 are not affected by this issue. |
| Out-of-bounds Write vulnerability in ixray-team ixray-1.6-stcop.This issue affects ixray-1.6-stcop: before 1.3. |
| code-projects Mobile Shop Management System 1.0 is vulnerable to File Upload in /ExAddProduct.php. |
| billboard.js before 3.18.0 allows an attacker to execute malicious JavaScript due to improper sanitization during chart option binding. |
| In Bun before 1.3.5, the default trusted dependencies list (aka trust allow list) can be spoofed by a non-npm package in the case of a matching name (for file, link, git, or github). |
| WinAVR version 20100110 contains an insecure permissions vulnerability that allows authenticated users to modify system files and executables. Attackers can leverage the overly permissive access controls to potentially modify critical DLLs and executable files in the WinAVR installation directory. |
| Easy CD & DVD Cover Creator 4.13 contains a buffer overflow vulnerability in the serial number input field that allows attackers to crash the application. Attackers can generate a 6000-byte payload and paste it into the serial number field to trigger an application crash. |
| VestaCP 0.9.8-26 contains a session token vulnerability in the LoginAs module that allows remote attackers to manipulate authentication tokens. Attackers can exploit insufficient token validation to access user accounts and perform unauthorized login requests without proper administrative permissions. |
| Gila CMS versions prior to 2.0.0 contain a remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary system commands through manipulated HTTP headers. Attackers can inject PHP code in the User-Agent header with shell_exec() to run system commands by sending crafted requests to the admin endpoint. |
| A denial-of-service vulnerability exists in the NetX IPv6 component functionality of Eclipse ThreadX NetX Duo. A specially crafted network packet of "Packet Too Big" with more than 15 different source address can lead to denial of service. An attacker can send a malicious packet to trigger this vulnerability. |
| Phpscript-sgh 0.1.0 contains a time-based blind SQL injection vulnerability in the admin interface that allows attackers to manipulate database queries through the 'id' parameter. Attackers can exploit this vulnerability by crafting malicious payloads that trigger time delays, enabling them to extract sensitive database information through conditional sleep techniques. |
| Improper Control of Generation of Code ('Code Injection') vulnerability in pilgrimage233 Minecraft-Rcon-Manage.This issue affects Minecraft-Rcon-Manage: before 3.0. |
| Testa Online Test Management System 3.4.7 contains a SQL injection vulnerability that allows attackers to manipulate database queries through the 'q' search parameter. Attackers can inject malicious SQL code in the search field to extract database information, potentially accessing sensitive user or system data. |
| The vulnerability stems from an incorrect error-checking logic in the CreateCounter() function (in threadx/utility/rtos_compatibility_layers/OSEK/tx_osek.c) when handling the return value of osek_get_counter(). Specifically, the current code checks if cntr_id equals 0u to determine failure, but @osek_get_counter() actually returns E_OS_SYS_STACK (defined as 12U) when it fails. This mismatch causes the error branch to never execute even when the counter pool is exhausted.
As a result, when the counter pool is depleted, the code proceeds to cast the error code (12U) to a pointer (OSEK_COUNTER *), creating a wild pointer. Subsequent writes to members of this pointer lead to writes to illegal memory addresses (e.g., 0x0000000C), which can trigger immediate HardFaults or silent memory corruption.
This vulnerability poses significant risks, including potential denial-of-service attacks (via repeated calls to exhaust the counter pool) and unauthorized memory access. |
