| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)
If an mremap() syscall with old_size=0 ends up in move_page_tables(), it
will call invalidate_range_start()/invalidate_range_end() unnecessarily,
i.e. with an empty range.
This causes a WARN in KVM's mmu_notifier. In the past, empty ranges
have been diagnosed to be off-by-one bugs, hence the WARNing. Given the
low (so far) number of unique reports, the benefits of detecting more
buggy callers seem to outweigh the cost of having to fix cases such as
this one, where userspace is doing something silly. In this particular
case, an early return from move_page_tables() is enough to fix the
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix qgroup reserve overflow the qgroup limit
We use extent_changeset->bytes_changed in qgroup_reserve_data() to record
how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the
bytes_changed is set as "unsigned int", and it will overflow if we try to
fallocate a range larger than 4GiB. The result is we reserve less bytes
and eventually break the qgroup limit.
Unlike regular buffered/direct write, which we use one changeset for
each ordered extent, which can never be larger than 256M. For
fallocate, we use one changeset for the whole range, thus it no longer
respects the 256M per extent limit, and caused the problem.
The following example test script reproduces the problem:
$ cat qgroup-overflow.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Set qgroup limit to 2GiB.
btrfs quota enable $MNT
btrfs qgroup limit 2G $MNT
# Try to fallocate a 3GiB file. This should fail.
echo
echo "Try to fallocate a 3GiB file..."
fallocate -l 3G $MNT/3G.file
# Try to fallocate a 5GiB file.
echo
echo "Try to fallocate a 5GiB file..."
fallocate -l 5G $MNT/5G.file
# See we break the qgroup limit.
echo
sync
btrfs qgroup show -r $MNT
umount $MNT
When running the test:
$ ./qgroup-overflow.sh
(...)
Try to fallocate a 3GiB file...
fallocate: fallocate failed: Disk quota exceeded
Try to fallocate a 5GiB file...
qgroupid rfer excl max_rfer
-------- ---- ---- --------
0/5 5.00GiB 5.00GiB 2.00GiB
Since we have no control of how bytes_changed is used, it's better to
set it to u64. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix u8 overflow
By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases
multiple times and eventually it will wrap around the maximum number
(i.e., 255).
This patch prevents this by adding a boundary check with
L2CAP_MAX_CONF_RSP
Btmon log:
Bluetooth monitor ver 5.64
= Note: Linux version 6.1.0-rc2 (x86_64) 0.264594
= Note: Bluetooth subsystem version 2.22 0.264636
@ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191
= New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604
@ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741
= Open Index: 00:00:00:00:00:00 [hci0] 13.900426
(...)
> ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106
invalid packet size (12 != 1033)
08 00 01 00 02 01 04 00 01 10 ff ff ............
> ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561
invalid packet size (14 != 1547)
0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@.....
> ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390
invalid packet size (16 != 2061)
0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@.......
> ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932
invalid packet size (16 != 2061)
0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@.......
= bluetoothd: Bluetooth daemon 5.43 14.401828
> ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753
invalid packet size (12 != 1033)
08 00 01 00 04 01 04 00 40 00 00 00 ........@... |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Fix preallocation discarding at indirect extent boundary
When preallocation extent is the first one in the extent block, the
code would corrupt extent tree header instead. Fix the problem and use
udf_delete_aext() for deleting extent to avoid some code duplication. |
| In the Linux kernel, the following vulnerability has been resolved:
CDC-NCM: avoid overflow in sanity checking
A broken device may give an extreme offset like 0xFFF0
and a reasonable length for a fragment. In the sanity
check as formulated now, this will create an integer
overflow, defeating the sanity check. Both offset
and offset + len need to be checked in such a manner
that no overflow can occur.
And those quantities should be unsigned. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix leaking sent_cmd skb
sent_cmd memory is not freed before freeing hci_dev causing it to leak
it contents. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix ia_size underflow
iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and
NFSv4 both define file size as an unsigned 64-bit type. Thus there
is a range of valid file size values an NFS client can send that is
already larger than Linux can handle.
Currently decode_fattr4() dumps a full u64 value into ia_size. If
that value happens to be larger than S64_MAX, then ia_size
underflows. I'm about to fix up the NFSv3 behavior as well, so let's
catch the underflow in the common code path: nfsd_setattr(). |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix the behavior of READ near OFFSET_MAX
Dan Aloni reports:
> Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to
> the RPC read layers") on the client, a read of 0xfff is aligned up
> to server rsize of 0x1000.
>
> As a result, in a test where the server has a file of size
> 0x7fffffffffffffff, and the client tries to read from the offset
> 0x7ffffffffffff000, the read causes loff_t overflow in the server
> and it returns an NFS code of EINVAL to the client. The client as
> a result indefinitely retries the request.
The Linux NFS client does not handle NFS?ERR_INVAL, even though all
NFS specifications permit servers to return that status code for a
READ.
Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed
and return a short result. Set the EOF flag in the result to prevent
the client from retrying the READ request. This behavior appears to
be consistent with Solaris NFS servers.
Note that NFSv3 and NFSv4 use u64 offset values on the wire. These
must be converted to loff_t internally before use -- an implicit
type cast is not adequate for this purpose. Otherwise VFS checks
against sb->s_maxbytes do not work properly. |
| In the Linux kernel, the following vulnerability has been resolved:
vt_ioctl: fix array_index_nospec in vt_setactivate
array_index_nospec ensures that an out-of-bounds value is set to zero
on the transient path. Decreasing the value by one afterwards causes
a transient integer underflow. vsa.console should be decreased first
and then sanitized with array_index_nospec.
Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh
Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU
Amsterdam. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()
We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc()
The voice allocator sometimes begins allocating from near the end of the
array and then wraps around, however snd_emu10k1_pcm_channel_alloc()
accesses the newly allocated voices as if it never wrapped around.
This results in out of bounds access if the first voice has a high enough
index so that first_voice + requested_voice_count > NUM_G (64).
The more voices are requested, the more likely it is for this to occur.
This was initially discovered using PipeWire, however it can be reproduced
by calling aplay multiple times with 16 channels:
aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero
UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40
index 65 is out of range for type 'snd_emu10k1_voice [64]'
CPU: 1 PID: 31977 Comm: aplay Tainted: G W IOE 6.0.0-rc2-emu10k1+ #7
Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x3f
__ubsan_handle_out_of_bounds.cold+0x44/0x49
snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1]
snd_pcm_hw_params+0x29f/0x600 [snd_pcm]
snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm]
? exit_to_user_mode_prepare+0x35/0x170
? do_syscall_64+0x69/0x90
? syscall_exit_to_user_mode+0x26/0x50
? do_syscall_64+0x69/0x90
? exit_to_user_mode_prepare+0x35/0x170
snd_pcm_ioctl+0x27/0x40 [snd_pcm]
__x64_sys_ioctl+0x95/0xd0
do_syscall_64+0x5c/0x90
? do_syscall_64+0x69/0x90
? do_syscall_64+0x69/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()
There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and
the number of it's interfaces less than 4, an out-of-bounds read bug occurs
when parsing the interface descriptor for this device.
Fix this by checking the number of interfaces. |
| A weakness has been identified in H3C Magic B0 up to 100R002. This impacts the function EditWlanMacList of the file /goform/aspForm. This manipulation of the argument param causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper Validation of Specified Quantity in Input vulnerability in Mitsubishi Electric CNC Series allows a remote unauthenticated attacker to cause Denial of Service (DoS) condition on the product by sending specially crafted packets to TCP port 683, causing an emergency stop. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0. This bug triggers this warning
on a system with IOMMU enabled:
WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170
RIP: 0010:__iommu_dma_unmap+0x159/0x170
Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45
b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ff22d31181150c88 EFLAGS: 00010206
RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000
R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000
R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00
FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0
PKRU: 55555554
Call Trace:
<IRQ>
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? __iommu_dma_unmap+0x159/0x170
? report_bug+0x17e/0x1b0
? handle_bug+0x46/0x90
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? __iommu_dma_unmap+0x159/0x170
? __iommu_dma_unmap+0xb3/0x170
iommu_dma_unmap_page+0x4f/0x100
dma_unmap_page_attrs+0x52/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? xdp_return_frame+0x2e/0xd0
bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en]
__bnxt_poll_work_done+0x81/0x1e0 [bnxt_en]
bnxt_poll+0xd3/0x1e0 [bnxt_en] |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: Fix stack memory use after return in raid1_reshape
In the raid1_reshape function, newpool is
allocated on the stack and assigned to conf->r1bio_pool.
This results in conf->r1bio_pool.wait.head pointing
to a stack address.
Accessing this address later can lead to a kernel panic.
Example access path:
raid1_reshape()
{
// newpool is on the stack
mempool_t newpool, oldpool;
// initialize newpool.wait.head to stack address
mempool_init(&newpool, ...);
conf->r1bio_pool = newpool;
}
raid1_read_request() or raid1_write_request()
{
alloc_r1bio()
{
mempool_alloc()
{
// if pool->alloc fails
remove_element()
{
--pool->curr_nr;
}
}
}
}
mempool_free()
{
if (pool->curr_nr < pool->min_nr) {
// pool->wait.head is a stack address
// wake_up() will try to access this invalid address
// which leads to a kernel panic
return;
wake_up(&pool->wait);
}
}
Fix:
reinit conf->r1bio_pool.wait after assigning newpool. |
| A flaw was found in WebKitGTK. Processing malicious web content can cause an unexpected process crash due to improper memory handling. |
| A flaw was found in WebKitGTK and WPE WebKit. This vulnerability allows an out-of-bounds read and integer underflow, leading to a UIProcess crash (DoS) via a crafted payload to the GLib remote inspector server. |
| A data corruption vulnerability has been identified in the luksmeta utility when used with the LUKS1 disk encryption format. An attacker with the necessary permissions can exploit this flaw by writing a large amount of metadata to an encrypted device. The utility fails to correctly validate the available space, causing the metadata to overwrite and corrupt the user's encrypted data. This action leads to a permanent loss of the stored information. Devices using the LUKS formats other than LUKS1 are not affected by this issue. |
| Exim before 4.99.1, with certain non-default rate-limit configurations, allows a remote heap-based buffer overflow because database records are cast directly to internal structures without validation. |
