| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Sandboxie Plus 0.7.2 contains an unquoted service path vulnerability in the SbieSvc service that allows local attackers to execute code with elevated privileges. Attackers can exploit the unquoted binary path to inject malicious executables that will be launched with LocalSystem permissions during service startup. |
| When passing data to the b64decode(), standard_b64decode(), and urlsafe_b64decode() functions in the "base64" module the characters "+/" will always be accepted, regardless of the value of "altchars" parameter, typically used to establish an "alternative base64 alphabet" such as the URL safe alphabet. This behavior matches what is recommended in earlier base64 RFCs, but newer RFCs now recommend either dropping characters outside the specified base64 alphabet or raising an error. The old behavior has the possibility of causing data integrity issues.
This behavior can only be insecure if your application uses an alternate base64 alphabet (without "+/"). If your application does not use the "altchars" parameter or the urlsafe_b64decode() function, then your application does not use an alternative base64 alphabet.
The attached patches DOES NOT make the base64-decode behavior raise an error, as this would be a change in behavior and break existing programs. Instead, the patch deprecates the behavior which will be replaced with the newly recommended behavior in a future version of Python. Users are recommended to mitigate by verifying user-controlled inputs match the base64
alphabet they are expecting or verify that their application would not be
affected if the b64decode() functions accepted "+" or "/" outside of altchars. |
| Altium Designer version 24.9.0 does not validate self-signed server certificates for cloud connections. An attacker capable of performing a man-in-the-middle (MITM) attack could exploit this issue to intercept or manipulate network traffic, potentially exposing authentication credentials or sensitive design data. |
| EVerest is an EV charging software stack. In all versions up to and including 2025.12.1, the default value for `terminate_connection_on_failed_response` is `False`, which leaves the responsibility for session and connection termination to the EV. In this configuration, any errors encountered by the module are logged but do not trigger countermeasures such as session and connection reset or termination. This could be abused by a malicious user in order to exploit other weaknesses or vulnerabilities. While the default will stay at the setting that is described as potentially problematic in this reported issue, a mitigation is available by changing the `terminate_connection_on_failed_response` setting to `true`. However this cannot be set to this value by default since it can trigger errors in vehicle ECUs requiring ECU resets and lengthy unavailability in charging for vehicles. The maintainers judge this to be a much more important workaround then short-term unavailability of an EVSE, therefore this setting will stay at the current value. |
| EVerest is an EV charging software stack. Prior to version 2025.9.0, once the validity of the received V2G message has been verified, it is checked whether the submitted session ID matches the registered one. However, if no session has been registered, the default value is 0. Therefore, a message submitted with a session ID of 0 is accepted, as it matches the registered value. This could allow unauthorized and anonymous indirect emission of MQTT messages and communication with V2G messages handlers, updating a session context. Version 2025.9.0 fixes the issue. |
| ArduinoCore-avr contains the source code and configuration files of the Arduino AVR Boards platform. A vulnerability in versions prior to 1.8.7 allows an attacker to trigger a stack-based buffer overflow when converting floating-point values to strings with high precision. By passing very large `decimalPlaces` values to the affected String constructors or concat methods, the `dtostrf` function writes beyond fixed-size stack buffers, causing memory corruption and denial of service. Under specific conditions, this could enable arbitrary code execution on AVR-based Arduino boards.
### Patches
- The Fix is included starting from the `1.8.7` release available from the following link [ArduinoCore-avr v1.8.7](https://github.com/arduino/ArduinoCore-avr)
- The Fixing Commit is available at the following link [1a6a417f89c8901dad646efce74ae9d3ddebfd59](https://github.com/arduino/ArduinoCore-avr/pull/613/commits/1a6a417f89c8901dad646efce74ae9d3ddebfd59)
### References
- [ASEC-26-001 ArduinoCore-avr vXXXX Resolves Buffer Overflow Vulnerability](https://support.arduino.cc/hc/en-us/articles/XXXXX)
### Credits
- Maxime Rossi Bellom and Ramtine Tofighi Shirazi from SecMate (https://secmate.dev/) |
| Tenda AX-1803 v1.0.0.1 was discovered to contain a stack overflow in the ssid parameter of the form_fast_setting_wifi_set function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Logic vulnerability in TP-Link Archer C20 v6.0 and Archer AX53 v1.0 (TDDP module) allows unauthenticated adjacent attackers to execute administrative commands including factory reset and device reboot without credentials. Attackers on the adjacent network can remotely trigger factory resets and reboots without credentials, causing configuration loss and interruption of device availability.This issue affects Archer C20 v6.0 < V6_251031.
Archer AX53 v1.0 <
V1_251215 |
| Multiple vulnerabilities in the web-based management interface of Cisco Packaged Contact Center Enterprise (Packaged CCE) and Cisco Unified Contact Center Enterprise (Unified CCE) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device.
These vulnerabilities exist because the web-based management interface does not properly validate user-supplied input. An attacker could exploit these vulnerabilities by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, the attacker must have valid administrative credentials. |
| ManageIQ is an open-source management platform. A flaw was found in the ManageIQ API prior to version radjabov-2 where a malformed TimeProfile could be created causing later UI and API requests to timeout leading to a Denial of Service. Version radjabov-2 contains a patch. One may also apply the patch manually. |
| External Secrets Operator reads information from a third-party service and automatically injects the values as Kubernetes Secrets. Starting in version 0.20.2 and prior to version 1.2.0, the `getSecretKey` template function, while introduced for senhasegura Devops Secrets Management (DSM) provider, has the ability to fetch secrets cross-namespaces with the roleBinding of the external-secrets controller, bypassing our security mechanisms. This function was completely removed in version 1.2.0, as everything done with that templating function can be done in a different way while respecting External Secrets Operator's safeguards As a workaround, use a policy engine such as Kubernetes, Kyverno, Kubewarden, or OPA to prevent the usage of `getSecretKey` in any ExternalSecret resource. |
| Fleet is open source device management software. A broken access control issue in versions prior to 4.78.3, 4.77.1, 4.76.2, 4.75.2, and 4.53.3 allowed authenticated users to access debug and profiling endpoints regardless of role. As a result, low-privilege users could view internal server diagnostics and trigger resource-intensive profiling operations. Fleet’s debug/pprof endpoints are accessible to any authenticated user regardless of role, including the lowest-privilege “Observer” role. This allows low-privilege users to access sensitive server internals, including runtime profiling data and in-memory application state, and to trigger CPU-intensive profiling operations that could lead to denial of service. Versions 4.78.3, 4.77.1, 4.76.2, 4.75.2, and 4.53.3 fix the issue. If an immediate upgrade is not possible, users should put the debug/pprof endpoints behind an IP allowlist as a workaround. |
| hustoj is an open source online judge based on PHP/C++/MySQL/Linux for ACM/ICPC and NOIP training. All versions are vulnerable to CSV Injection (Formula Injection) through the contest rank export functionality (contestrank.xls.php and admin/ranklist_export.php). The application fails to sanitize user-supplied input (specifically the "Nickname" field) before exporting it to an .xls file (which renders as an HTML table but is opened by Excel). If a malicious user sets their nickname to an Excel formula when an administrator exports and opens the rank list in Microsoft Excel, the formula will be executed. This can lead to arbitrary command execution (RCE) on the administrator's machine or data exfiltration. A fix was not available at the time of publication. |
| Tendenci is an open source content management system built for non-profits, associations and cause-based sites. Versions 15.3.11 and below include a critical deserialization vulnerability in the Helpdesk module (which is not enabled by default). This vulnerability allows Remote Code Execution (RCE) by an authenticated user with staff security level due to using Python's pickle module in helpdesk /reports/. The original CVE-2020-14942 was incompletely patched. While ticket_list() was fixed to use safe JSON deserialization, the run_report() function still uses unsafe pickle.loads(). The impact is limited to the permissions of the user running the application, typically www-data, which generally lacks write (except for upload directories) and execute permissions. This issue has been fixed in version 15.3.12. |
| EVerest is an EV charging software stack. Prior to version 2025.9.0, in several places, integer values are concatenated to literal strings when throwing errors. This results in pointers arithmetic instead of printing the integer value as expected, like most of interpreted languages. This can be used by malicious operator to read unintended memory regions, including the heap and the stack. Version 2025.9.0 fixes the issue. |
| seroval facilitates JS value stringification, including complex structures beyond JSON.stringify capabilities. In versions 1.4.0
and below, overriding encoded array lengths by replacing them with an excessively large value causes the deserialization process to significantly increase processing time. This issue has been fixed in version 1.4.1. |
| CoreShop is a Pimcore enhanced eCommerce solution. An error-based SQL Injection vulnerability was identified in versions prior to 4.1.9 in the `CustomerTransformerController` within the CoreShop admin panel. The affected endpoint improperly interpolates user-supplied input into a SQL query, leading to database error disclosure and potential data extraction. Version 4.1.9 fixes the issue. |
| Mastodon is a free, open-source social network server based on ActivityPub. Mastodon versions before v4.3.18, v4.4.12, and v4.5.5 do not have a limit on the maximum number of poll options for remote posts, allowing attackers to create polls with a very large amount of options, greatly increasing resource consumption. Depending on the number of poll options, an attacker can cause disproportionate resource usage in both Mastodon servers and clients, potentially causing Denial of Service either server-side or client-side. Mastodon versions v4.5.5, v4.4.12, v4.3.18 are patched. |
| sm-crypto provides JavaScript implementations of the Chinese cryptographic algorithms SM2, SM3, and SM4. A signature malleability vulnerability exists in the SM2 signature verification logic of the sm-crypto library prior to version 0.3.14. An attacker can derive a new valid signature for a previously signed message from an existing signature. Version 0.3.14 patches the issue. |
| Appsmith is a platform to build admin panels, internal tools, and dashboards. In versions 1.94 and below, publicly accessible apps allow unauthenticated users to execute unpublished (edit-mode) actions by sending viewMode=false (or omitting it) to POST /api/v1/actions/execute. This bypasses the expected publish boundary where public viewers should only execute published actions, not edit-mode versions. An attack can result in sensitive data exposure, execution of edit‑mode queries and APIs, development data access, and the ability to trigger side effect behavior. This issue does not have a released fix at the time of publication. |
