| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
acpi: nfit: vmalloc-out-of-bounds Read in acpi_nfit_ctl
Fix an issue detected by syzbot with KASAN:
BUG: KASAN: vmalloc-out-of-bounds in cmd_to_func drivers/acpi/nfit/
core.c:416 [inline]
BUG: KASAN: vmalloc-out-of-bounds in acpi_nfit_ctl+0x20e8/0x24a0
drivers/acpi/nfit/core.c:459
The issue occurs in cmd_to_func when the call_pkg->nd_reserved2
array is accessed without verifying that call_pkg points to a buffer
that is appropriately sized as a struct nd_cmd_pkg. This can lead
to out-of-bounds access and undefined behavior if the buffer does not
have sufficient space.
To address this, a check was added in acpi_nfit_ctl() to ensure that
buf is not NULL and that buf_len is less than sizeof(*call_pkg)
before accessing it. This ensures safe access to the members of
call_pkg, including the nd_reserved2 array. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: fix LED ID check in led_tg_check()
Syzbot has reported the following BUG detected by KASAN:
BUG: KASAN: slab-out-of-bounds in strlen+0x58/0x70
Read of size 1 at addr ffff8881022da0c8 by task repro/5879
...
Call Trace:
<TASK>
dump_stack_lvl+0x241/0x360
? __pfx_dump_stack_lvl+0x10/0x10
? __pfx__printk+0x10/0x10
? _printk+0xd5/0x120
? __virt_addr_valid+0x183/0x530
? __virt_addr_valid+0x183/0x530
print_report+0x169/0x550
? __virt_addr_valid+0x183/0x530
? __virt_addr_valid+0x183/0x530
? __virt_addr_valid+0x45f/0x530
? __phys_addr+0xba/0x170
? strlen+0x58/0x70
kasan_report+0x143/0x180
? strlen+0x58/0x70
strlen+0x58/0x70
kstrdup+0x20/0x80
led_tg_check+0x18b/0x3c0
xt_check_target+0x3bb/0xa40
? __pfx_xt_check_target+0x10/0x10
? stack_depot_save_flags+0x6e4/0x830
? nft_target_init+0x174/0xc30
nft_target_init+0x82d/0xc30
? __pfx_nft_target_init+0x10/0x10
? nf_tables_newrule+0x1609/0x2980
? nf_tables_newrule+0x1609/0x2980
? rcu_is_watching+0x15/0xb0
? nf_tables_newrule+0x1609/0x2980
? nf_tables_newrule+0x1609/0x2980
? __kmalloc_noprof+0x21a/0x400
nf_tables_newrule+0x1860/0x2980
? __pfx_nf_tables_newrule+0x10/0x10
? __nla_parse+0x40/0x60
nfnetlink_rcv+0x14e5/0x2ab0
? __pfx_validate_chain+0x10/0x10
? __pfx_nfnetlink_rcv+0x10/0x10
? __lock_acquire+0x1384/0x2050
? netlink_deliver_tap+0x2e/0x1b0
? __pfx_lock_release+0x10/0x10
? netlink_deliver_tap+0x2e/0x1b0
netlink_unicast+0x7f8/0x990
? __pfx_netlink_unicast+0x10/0x10
? __virt_addr_valid+0x183/0x530
? __check_object_size+0x48e/0x900
netlink_sendmsg+0x8e4/0xcb0
? __pfx_netlink_sendmsg+0x10/0x10
? aa_sock_msg_perm+0x91/0x160
? __pfx_netlink_sendmsg+0x10/0x10
__sock_sendmsg+0x223/0x270
____sys_sendmsg+0x52a/0x7e0
? __pfx_____sys_sendmsg+0x10/0x10
__sys_sendmsg+0x292/0x380
? __pfx___sys_sendmsg+0x10/0x10
? lockdep_hardirqs_on_prepare+0x43d/0x780
? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10
? exc_page_fault+0x590/0x8c0
? do_syscall_64+0xb6/0x230
do_syscall_64+0xf3/0x230
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
Since an invalid (without '\0' byte at all) byte sequence may be passed
from userspace, add an extra check to ensure that such a sequence is
rejected as possible ID and so never passed to 'kstrdup()' and further. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix Out-of-Bounds Read in ksmbd_vfs_stream_read
An offset from client could be a negative value, It could lead
to an out-of-bounds read from the stream_buf.
Note that this issue is coming when setting
'vfs objects = streams_xattr parameter' in ksmbd.conf. |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in iPadOS 17.7.4, visionOS 2.2, tvOS 18.2, watchOS 11.2, iOS 18.2 and iPadOS 18.2, macOS Sonoma 14.7.2, macOS Sequoia 15.2. Processing maliciously crafted web content may lead to an unexpected process crash. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check validity of link->type in bpf_link_show_fdinfo()
If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing
bpf_link_type_strs[link->type] may result in an out-of-bounds access.
To spot such missed invocations early in the future, checking the
validity of link->type in bpf_link_show_fdinfo() and emitting a warning
when such invocations are missed. |
| In the Linux kernel, the following vulnerability has been resolved:
igb: Fix potential invalid memory access in igb_init_module()
The pci_register_driver() can fail and when this happened, the dca_notifier
needs to be unregistered, otherwise the dca_notifier can be called when
igb fails to install, resulting to invalid memory access. |
| The hda driver is vulnerable to a buffer over-read from a guest-controlled value. |
| The NVMe driver function nvme_opc_get_log_page is vulnerable to a buffer over-read from a guest-controlled value. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: Add bounds checking to mi_enum_attr()
Added bounds checking to make sure that every attr don't stray beyond
valid memory region. |
| execute_filter_delta in archive_read_support_format_rar.c in libarchive before 3.7.5 allows out-of-bounds access via a crafted archive file because src can move beyond dst. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in gst_wavparse_adtl_chunk within gstwavparse.c. This vulnerability arises due to insufficient validation of the size parameter, which can exceed the bounds of the data buffer. As a result, an OOB read occurs in the following while loop. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been identified in the gst_wavparse_smpl_chunk function within gstwavparse.c. This function attempts to read 4 bytes from the data + 12 offset without checking if the size of the data buffer is sufficient. If the buffer is too small, the function reads beyond its bounds. This vulnerability may result in reading 4 bytes out of the boundaries of the data buffer. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been discovered in gst_wavparse_cue_chunk within gstwavparse.c. The vulnerability happens due to a discrepancy between the size of the data buffer and the size value provided to the function. This mismatch causes the comparison if (size < 4 + ncues * 24) to fail in some cases, allowing the subsequent loop to access beyond the bounds of the data buffer. The root cause of this discrepancy stems from a miscalculation when clipping the chunk size based on upstream data size. This vulnerability allows reading beyond the bounds of the data buffer, potentially leading to a crash (denial of service) or the leak of sensitive data. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been found in the parse_ds64 function within gstwavparse.c. The parse_ds64 function does not check that the buffer buf contains sufficient data before attempting to read from it, doing multiple GST_READ_UINT32_LE operations without performing boundary checks. This can lead to an OOB-read when buf is smaller than expected. This vulnerability allows reading beyond the bounds of the data buffer, potentially leading to a crash (denial of service) or the leak of sensitive data. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been identified in the gst_avi_subtitle_parse_gab2_chunk function within gstavisubtitle.c. The function reads the name_length value directly from the input file without checking it properly. Then, the a condition, does not properly handle cases where name_length is greater than 0xFFFFFFFF - 17, causing an integer overflow. In such scenario, the function attempts to access memory beyond the buffer leading to an OOB-read. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_add_wvpk_header function within matroska-demux.c. This function does not properly check the validity of the stream->codec_priv pointer in the following code. If stream->codec_priv is NULL, the call to GST_READ_UINT16_LE will attempt to dereference a null pointer, leading to a crash of the application. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in the qtdemux_merge_sample_table function within qtdemux.c. The problem is that the size of the stts buffer isn’t properly checked before reading stts_duration, allowing the program to read 4 bytes beyond the boundaries of stts->data. This vulnerability reads up to 4 bytes past the allocated bounds of the stts array. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been detected in the function qtdemux_parse_samples within qtdemux.c. This issue arises when the function qtdemux_parse_samples reads data beyond the boundaries of the stream->stco buffer. The following code snippet shows the call to qt_atom_parser_get_offset_unchecked, which leads to the OOB-read when parsing the provided GHSL-2024-245_crash1.mp4 file. This issue may lead to read up to 8 bytes out-of-bounds. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been discovered in the qtdemux_parse_svq3_stsd_data function within qtdemux.c. In the FOURCC_SMI_ case, seqh_size is read from the input file without proper validation. If seqh_size is greater than the remaining size of the data buffer, it can lead to an OOB-read in the following call to gst_buffer_fill, which internally uses memcpy. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in qtdemux_parse_container function within qtdemux.c. In the parent function qtdemux_parse_node, the value of length is not well checked. So, if length is big enough, it causes the pointer end to point beyond the boundaries of buffer. Subsequently, in the qtdemux_parse_container function, the while loop can trigger an OOB-read, accessing memory beyond the bounds of buf. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10. |
