| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: provide block_invalidate_folio to fix memory leak
The ntfs3 filesystem lacks the 'invalidate_folio' method and it causes
memory leak. If you write to the filesystem and then unmount it, the
cached written data are not freed and they are permanently leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix memory leak in parse_apply_sb_mount_options()
If processing the on-disk mount options fails after any memory was
allocated in the ext4_fs_context, e.g. s_qf_names, then this memory is
leaked. Fix this by calling ext4_fc_free() instead of kfree() directly.
Reproducer:
mkfs.ext4 -F /dev/vdc
tune2fs /dev/vdc -E mount_opts=usrjquota=file
echo clear > /sys/kernel/debug/kmemleak
mount /dev/vdc /vdc
echo scan > /sys/kernel/debug/kmemleak
sleep 5
echo scan > /sys/kernel/debug/kmemleak
cat /sys/kernel/debug/kmemleak |
| In the Linux kernel, the following vulnerability has been resolved:
mips: cdmm: Fix refcount leak in mips_cdmm_phys_base
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
If the XDP program doesn't result in XDP_PASS then we leak the
memory allocated by am65_cpsw_build_skb().
It is pointless to allocate SKB memory before running the XDP
program as we would be wasting CPU cycles for cases other than XDP_PASS.
Move the SKB allocation after evaluating the XDP program result.
This fixes the memleak. A performance boost is seen for XDP_DROP test.
XDP_DROP test:
Before: 460256 rx/s 0 err/s
After: 784130 rx/s 0 err/s |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix potential memory leak in iopf_queue_remove_device()
The iopf_queue_remove_device() helper removes a device from the per-iommu
iopf queue when PRI is disabled on the device. It responds to all
outstanding iopf's with an IOMMU_PAGE_RESP_INVALID code and detaches the
device from the queue.
However, it fails to release the group structure that represents a group
of iopf's awaiting for a response after responding to the hardware. This
can cause a memory leak if iopf_queue_remove_device() is called with
pending iopf's.
Fix it by calling iopf_free_group() after the iopf group is responded. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix memory leak in ceph_mds_auth_match()
We now free the temporary target path substring allocation on every
possible branch, instead of omitting the default branch. In some
cases, a memory leak occured, which could rapidly crash the system
(depending on how many file accesses were attempted).
This was detected in production because it caused a continuous memory
growth, eventually triggering kernel OOM and completely hard-locking
the kernel.
Relevant kmemleak stacktrace:
unreferenced object 0xffff888131e69900 (size 128):
comm "git", pid 66104, jiffies 4295435999
hex dump (first 32 bytes):
76 6f 6c 75 6d 65 73 2f 63 6f 6e 74 61 69 6e 65 volumes/containe
72 73 2f 67 69 74 65 61 2f 67 69 74 65 61 2f 67 rs/gitea/gitea/g
backtrace (crc 2f3bb450):
[<ffffffffaa68fb49>] __kmalloc_noprof+0x359/0x510
[<ffffffffc32bf1df>] ceph_mds_check_access+0x5bf/0x14e0 [ceph]
[<ffffffffc3235722>] ceph_open+0x312/0xd80 [ceph]
[<ffffffffaa7dd786>] do_dentry_open+0x456/0x1120
[<ffffffffaa7e3729>] vfs_open+0x79/0x360
[<ffffffffaa832875>] path_openat+0x1de5/0x4390
[<ffffffffaa834fcc>] do_filp_open+0x19c/0x3c0
[<ffffffffaa7e44a1>] do_sys_openat2+0x141/0x180
[<ffffffffaa7e4945>] __x64_sys_open+0xe5/0x1a0
[<ffffffffac2cc2f7>] do_syscall_64+0xb7/0x210
[<ffffffffac400130>] entry_SYSCALL_64_after_hwframe+0x77/0x7f
It can be triggered by mouting a subdirectory of a CephFS filesystem,
and then trying to access files on this subdirectory with an auth token
using a path-scoped capability:
$ ceph auth get client.services
[client.services]
key = REDACTED
caps mds = "allow rw fsname=cephfs path=/volumes/"
caps mon = "allow r fsname=cephfs"
caps osd = "allow rw tag cephfs data=cephfs"
$ cat /proc/self/mounts
services@[REDACTED].cephfs=/volumes/containers /ceph/containers ceph rw,noatime,name=services,secret=<hidden>,ms_mode=prefer-crc,mount_timeout=300,acl,mon_addr=[REDACTED]:3300,recover_session=clean 0 0
$ seq 1 1000000 | xargs -P32 --replace={} touch /ceph/containers/file-{} && \
seq 1 1000000 | xargs -P32 --replace={} cat /ceph/containers/file-{}
[ idryomov: combine if statements, rename rc to path_matched and make
it a bool, formatting ] |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: virtuser: fix missing lookup table cleanups
When a virtuser device is created via configfs and the probe fails due
to an incorrect lookup table, the table is not removed. This prevents
subsequent probe attempts from succeeding, even if the issue is
corrected, unless the device is released. Additionally, cleanup is also
needed in the less likely case of platform_device_register_full()
failure.
Besides, a consistent memory leak in lookup_table->dev_id was spotted
using kmemleak by toggling the live state between 0 and 1 with a correct
lookup table.
Introduce gpio_virtuser_remove_lookup_table() as the counterpart to the
existing gpio_virtuser_make_lookup_table() and call it from all
necessary points to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove()
This will ensure that the scsi host is cleaned up properly using
scsi_host_dev_release(). Otherwise, it may lead to memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix handling of plane refcount
[Why]
The mechanism to backup and restore plane states doesn't maintain
refcount, which can cause issues if the refcount of the plane changes
in between backup and restore operations, such as memory leaks if the
refcount was supposed to go down, or double frees / invalid memory
accesses if the refcount was supposed to go up.
[How]
Cache and re-apply current refcount when restoring plane states. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: mediatek: add intf release flow when usb disconnect
MediaTek claim an special usb intr interface for ISO data transmission.
The interface need to be released before unregistering hci device when
usb disconnect. Removing BT usb dongle without properly releasing the
interface may cause Kernel panic while unregister hci device. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx9: Add Cleaner Shader Deinitialization in gfx_v9_0 Module
This commit addresses an omission in the previous patch related to the
cleaner shader support for GFX9 hardware. Specifically, it adds the
necessary deinitialization code for the cleaner shader in the
gfx_v9_0_sw_fini function.
The added line amdgpu_gfx_cleaner_shader_sw_fini(adev); ensures that any
allocated resources for the cleaner shader are freed correctly, avoiding
potential memory leaks and ensuring that the GPU state is clean for the
next initialization sequence. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: Initialize cfid->tcon before performing network ops
Avoid leaking a tcon ref when a lease break races with opening the
cached directory. Processing the leak break might take a reference to
the tcon in cached_dir_lease_break() and then fail to release the ref in
cached_dir_offload_close, since cfid->tcon is still NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix qi_batch NULL pointer with nested parent domain
The qi_batch is allocated when assigning cache tag for a domain. While
for nested parent domain, it is missed. Hence, when trying to map pages
to the nested parent, NULL dereference occurred. Also, there is potential
memleak since there is no lock around domain->qi_batch allocation.
To solve it, add a helper for qi_batch allocation, and call it in both
the __cache_tag_assign_domain() and __cache_tag_assign_parent_domain().
BUG: kernel NULL pointer dereference, address: 0000000000000200
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 8104795067 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 223 UID: 0 PID: 4357 Comm: qemu-system-x86 Not tainted 6.13.0-rc1-00028-g4b50c3c3b998-dirty #2632
Call Trace:
? __die+0x24/0x70
? page_fault_oops+0x80/0x150
? do_user_addr_fault+0x63/0x7b0
? exc_page_fault+0x7c/0x220
? asm_exc_page_fault+0x26/0x30
? cache_tag_flush_range_np+0x13c/0x260
intel_iommu_iotlb_sync_map+0x1a/0x30
iommu_map+0x61/0xf0
batch_to_domain+0x188/0x250
iopt_area_fill_domains+0x125/0x320
? rcu_is_watching+0x11/0x50
iopt_map_pages+0x63/0x100
iopt_map_common.isra.0+0xa7/0x190
iopt_map_user_pages+0x6a/0x80
iommufd_ioas_map+0xcd/0x1d0
iommufd_fops_ioctl+0x118/0x1c0
__x64_sys_ioctl+0x93/0xc0
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: fix the memleak while create new ctrl failed
Now while we create new ctrl failed, we have not free the
tagset occupied by admin_q, here try to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/numa: fix memory leak due to the overwritten vma->numab_state
[Problem Description]
When running the hackbench program of LTP, the following memory leak is
reported by kmemleak.
# /opt/ltp/testcases/bin/hackbench 20 thread 1000
Running with 20*40 (== 800) tasks.
# dmesg | grep kmemleak
...
kmemleak: 480 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 665 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888cd8ca2c40 (size 64):
comm "hackbench", pid 17142, jiffies 4299780315
hex dump (first 32 bytes):
ac 74 49 00 01 00 00 00 4c 84 49 00 01 00 00 00 .tI.....L.I.....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc bff18fd4):
[<ffffffff81419a89>] __kmalloc_cache_noprof+0x2f9/0x3f0
[<ffffffff8113f715>] task_numa_work+0x725/0xa00
[<ffffffff8110f878>] task_work_run+0x58/0x90
[<ffffffff81ddd9f8>] syscall_exit_to_user_mode+0x1c8/0x1e0
[<ffffffff81dd78d5>] do_syscall_64+0x85/0x150
[<ffffffff81e0012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
This issue can be consistently reproduced on three different servers:
* a 448-core server
* a 256-core server
* a 192-core server
[Root Cause]
Since multiple threads are created by the hackbench program (along with
the command argument 'thread'), a shared vma might be accessed by two or
more cores simultaneously. When two or more cores observe that
vma->numab_state is NULL at the same time, vma->numab_state will be
overwritten.
Although current code ensures that only one thread scans the VMAs in a
single 'numa_scan_period', there might be a chance for another thread
to enter in the next 'numa_scan_period' while we have not gotten till
numab_state allocation [1].
Note that the command `/opt/ltp/testcases/bin/hackbench 50 process 1000`
cannot the reproduce the issue. It is verified with 200+ test runs.
[Solution]
Use the cmpxchg atomic operation to ensure that only one thread executes
the vma->numab_state assignment.
[1] https://lore.kernel.org/lkml/1794be3c-358c-4cdc-a43d-a1f841d91ef7@amd.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix a memleak issue when driver is removed
Running "modprobe amdgpu" the second time (followed by a modprobe -r
amdgpu) causes a call trace like:
[ 845.212163] Memory manager not clean during takedown.
[ 845.212170] WARNING: CPU: 4 PID: 2481 at drivers/gpu/drm/drm_mm.c:999 drm_mm_takedown+0x2b/0x40
[ 845.212177] Modules linked in: amdgpu(OE-) amddrm_ttm_helper(OE) amddrm_buddy(OE) amdxcp(OE) amd_sched(OE) drm_exec drm_suballoc_helper drm_display_helper i2c_algo_bit amdttm(OE) amdkcl(OE) cec rc_core sunrpc qrtr intel_rapl_msr intel_rapl_common snd_hda_codec_hdmi edac_mce_amd snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_usb_audio snd_hda_codec snd_usbmidi_lib kvm_amd snd_hda_core snd_ump mc snd_hwdep kvm snd_pcm snd_seq_midi snd_seq_midi_event irqbypass crct10dif_pclmul snd_rawmidi polyval_clmulni polyval_generic ghash_clmulni_intel sha256_ssse3 sha1_ssse3 snd_seq aesni_intel crypto_simd snd_seq_device cryptd snd_timer mfd_aaeon asus_nb_wmi eeepc_wmi joydev asus_wmi snd ledtrig_audio sparse_keymap ccp wmi_bmof input_leds k10temp i2c_piix4 platform_profile rapl soundcore gpio_amdpt mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 hid_logitech_hidpp hid_logitech_dj hid_generic usbhid hid ahci xhci_pci igc crc32_pclmul libahci xhci_pci_renesas video
[ 845.212284] wmi [last unloaded: amddrm_ttm_helper(OE)]
[ 845.212290] CPU: 4 PID: 2481 Comm: modprobe Tainted: G W OE 6.8.0-31-generic #31-Ubuntu
[ 845.212296] RIP: 0010:drm_mm_takedown+0x2b/0x40
[ 845.212300] Code: 1f 44 00 00 48 8b 47 38 48 83 c7 38 48 39 f8 75 09 31 c0 31 ff e9 90 2e 86 00 55 48 c7 c7 d0 f6 8e 8a 48 89 e5 e8 f5 db 45 ff <0f> 0b 5d 31 c0 31 ff e9 74 2e 86 00 66 0f 1f 84 00 00 00 00 00 90
[ 845.212302] RSP: 0018:ffffb11302127ae0 EFLAGS: 00010246
[ 845.212305] RAX: 0000000000000000 RBX: ffff92aa5020fc08 RCX: 0000000000000000
[ 845.212307] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 845.212309] RBP: ffffb11302127ae0 R08: 0000000000000000 R09: 0000000000000000
[ 845.212310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000004
[ 845.212312] R13: ffff92aa50200000 R14: ffff92aa5020fb10 R15: ffff92aa5020faa0
[ 845.212313] FS: 0000707dd7c7c080(0000) GS:ffff92b93de00000(0000) knlGS:0000000000000000
[ 845.212316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 845.212318] CR2: 00007d48b0aee200 CR3: 0000000115a58000 CR4: 0000000000f50ef0
[ 845.212320] PKRU: 55555554
[ 845.212321] Call Trace:
[ 845.212323] <TASK>
[ 845.212328] ? show_regs+0x6d/0x80
[ 845.212333] ? __warn+0x89/0x160
[ 845.212339] ? drm_mm_takedown+0x2b/0x40
[ 845.212344] ? report_bug+0x17e/0x1b0
[ 845.212350] ? handle_bug+0x51/0xa0
[ 845.212355] ? exc_invalid_op+0x18/0x80
[ 845.212359] ? asm_exc_invalid_op+0x1b/0x20
[ 845.212366] ? drm_mm_takedown+0x2b/0x40
[ 845.212371] amdgpu_gtt_mgr_fini+0xa9/0x130 [amdgpu]
[ 845.212645] amdgpu_ttm_fini+0x264/0x340 [amdgpu]
[ 845.212770] amdgpu_bo_fini+0x2e/0xc0 [amdgpu]
[ 845.212894] gmc_v12_0_sw_fini+0x2a/0x40 [amdgpu]
[ 845.213036] amdgpu_device_fini_sw+0x11a/0x590 [amdgpu]
[ 845.213159] amdgpu_driver_release_kms+0x16/0x40 [amdgpu]
[ 845.213302] devm_drm_dev_init_release+0x5e/0x90
[ 845.213305] devm_action_release+0x12/0x30
[ 845.213308] release_nodes+0x42/0xd0
[ 845.213311] devres_release_all+0x97/0xe0
[ 845.213314] device_unbind_cleanup+0x12/0x80
[ 845.213317] device_release_driver_internal+0x230/0x270
[ 845.213319] ? srso_alias_return_thunk+0x5/0xfbef5
This is caused by lost memory during early init phase. First time driver
is removed, memory is freed but when second time the driver is inserted,
VBIOS dmub is not active, since the PSP policy is to retain the driver
loaded version on subsequent warm boots. Hence, communication with VBIOS
DMUB fails.
Fix this by aborting further comm
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: avoid memory leak in iocharset
A memleak was found as below:
unreferenced object 0xffff0000d10164d8 (size 8):
comm "pool-udisksd", pid 108217, jiffies 4295408555
hex dump (first 8 bytes):
75 74 66 38 00 cc cc cc utf8....
backtrace (crc de430d31):
[<ffff800081046e6c>] kmemleak_alloc+0xb8/0xc8
[<ffff8000803e6c3c>] __kmalloc_node_track_caller_noprof+0x380/0x474
[<ffff800080363b74>] kstrdup+0x70/0xfc
[<ffff80007bb3c6a4>] isofs_parse_param+0x228/0x2c0 [isofs]
[<ffff8000804d7f68>] vfs_parse_fs_param+0xf4/0x164
[<ffff8000804d8064>] vfs_parse_fs_string+0x8c/0xd4
[<ffff8000804d815c>] vfs_parse_monolithic_sep+0xb0/0xfc
[<ffff8000804d81d8>] generic_parse_monolithic+0x30/0x3c
[<ffff8000804d8bfc>] parse_monolithic_mount_data+0x40/0x4c
[<ffff8000804b6a64>] path_mount+0x6c4/0x9ec
[<ffff8000804b6e38>] do_mount+0xac/0xc4
[<ffff8000804b7494>] __arm64_sys_mount+0x16c/0x2b0
[<ffff80008002b8dc>] invoke_syscall+0x7c/0x104
[<ffff80008002ba44>] el0_svc_common.constprop.1+0xe0/0x104
[<ffff80008002ba94>] do_el0_svc+0x2c/0x38
[<ffff800081041108>] el0_svc+0x3c/0x1b8
The opt->iocharset is freed inside the isofs_fill_super function,
But there may be situations where it's not possible to
enter this function.
For example, in the get_tree_bdev_flags function,when
encountering the situation where "Can't mount, would change RO state,"
In such a case, isofs_fill_super will not have the opportunity
to be called,which means that opt->iocharset will not have the chance
to be freed,ultimately leading to a memory leak.
Let's move the memory freeing of opt->iocharset into
isofs_free_fc function. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
The alg instance should be released under the exception path, otherwise
there may be resource leak here.
To mitigate this, free the alg instance with crypto_free_shash when kmalloc
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: Don't leak cfid when reconnect races with open_cached_dir
open_cached_dir() may either race with the tcon reconnection even before
compound_send_recv() or directly trigger a reconnection via
SMB2_open_init() or SMB_query_info_init().
The reconnection process invokes invalidate_all_cached_dirs() via
cifs_mark_open_files_invalid(), which removes all cfids from the
cfids->entries list but doesn't drop a ref if has_lease isn't true. This
results in the currently-being-constructed cfid not being on the list,
but still having a refcount of 2. It leaks if returned from
open_cached_dir().
Fix this by setting cfid->has_lease when the ref is actually taken; the
cfid will not be used by other threads until it has a valid time.
Addresses these kmemleaks:
unreferenced object 0xffff8881090c4000 (size 1024):
comm "bash", pid 1860, jiffies 4295126592
hex dump (first 32 bytes):
00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de ........".......
00 ca 45 22 81 88 ff ff f8 dc 4f 04 81 88 ff ff ..E"......O.....
backtrace (crc 6f58c20f):
[<ffffffff8b895a1e>] __kmalloc_cache_noprof+0x2be/0x350
[<ffffffff8bda06e3>] open_cached_dir+0x993/0x1fb0
[<ffffffff8bdaa750>] cifs_readdir+0x15a0/0x1d50
[<ffffffff8b9a853f>] iterate_dir+0x28f/0x4b0
[<ffffffff8b9a9aed>] __x64_sys_getdents64+0xfd/0x200
[<ffffffff8cf6da05>] do_syscall_64+0x95/0x1a0
[<ffffffff8d00012f>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
unreferenced object 0xffff8881044fdcf8 (size 8):
comm "bash", pid 1860, jiffies 4295126592
hex dump (first 8 bytes):
00 cc cc cc cc cc cc cc ........
backtrace (crc 10c106a9):
[<ffffffff8b89a3d3>] __kmalloc_node_track_caller_noprof+0x363/0x480
[<ffffffff8b7d7256>] kstrdup+0x36/0x60
[<ffffffff8bda0700>] open_cached_dir+0x9b0/0x1fb0
[<ffffffff8bdaa750>] cifs_readdir+0x15a0/0x1d50
[<ffffffff8b9a853f>] iterate_dir+0x28f/0x4b0
[<ffffffff8b9a9aed>] __x64_sys_getdents64+0xfd/0x200
[<ffffffff8cf6da05>] do_syscall_64+0x95/0x1a0
[<ffffffff8d00012f>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
And addresses these BUG splats when unmounting the SMB filesystem:
BUG: Dentry ffff888140590ba0{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs]
WARNING: CPU: 3 PID: 3433 at fs/dcache.c:1536 umount_check+0xd0/0x100
Modules linked in:
CPU: 3 UID: 0 PID: 3433 Comm: bash Not tainted 6.12.0-rc4-g850925a8133c-dirty #49
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
RIP: 0010:umount_check+0xd0/0x100
Code: 8d 7c 24 40 e8 31 5a f4 ff 49 8b 54 24 40 41 56 49 89 e9 45 89 e8 48 89 d9 41 57 48 89 de 48 c7 c7 80 e7 db ac e8 f0 72 9a ff <0f> 0b 58 31 c0 5a 5b 5d 41 5c 41 5d 41 5e 41 5f e9 2b e5 5d 01 41
RSP: 0018:ffff88811cc27978 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff888140590ba0 RCX: ffffffffaaf20bae
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff8881f6fb6f40
RBP: ffff8881462ec000 R08: 0000000000000001 R09: ffffed1023984ee3
R10: ffff88811cc2771f R11: 00000000016cfcc0 R12: ffff888134383e08
R13: 0000000000000002 R14: ffff8881462ec668 R15: ffffffffaceab4c0
FS: 00007f23bfa98740(0000) GS:ffff8881f6f80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556de4a6f808 CR3: 0000000123c80000 CR4: 0000000000350ef0
Call Trace:
<TASK>
d_walk+0x6a/0x530
shrink_dcache_for_umount+0x6a/0x200
generic_shutdown_super+0x52/0x2a0
kill_anon_super+0x22/0x40
cifs_kill_sb+0x159/0x1e0
deactivate_locked_super+0x66/0xe0
cleanup_mnt+0x140/0x210
task_work_run+0xfb/0x170
syscall_exit_to_user_mode+0x29f/0x2b0
do_syscall_64+0xa1/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f23bfb93ae7
Code: ff ff ff ff c3 66 0f 1f 44 00 00 48 8b 0d 11 93 0d 00 f7 d8 64 89 01 b8 ff ff ff ff eb bf 0f 1f 44 00 00 b8 50 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e9 92 0d 00 f7 d8 64 89
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: tegra: Fix memory leak in terminate_all()
Terminate vdesc when terminating an ongoing transfer.
This will ensure that the vdesc is present in the desc_terminated list
The descriptor will be freed later in desc_free_list().
This fixes the memory leaks which can happen when terminating an
ongoing transfer. |
