| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OctoPrint provides a web interface for controlling consumer 3D printers. OctoPrint versions up to and including 1.11.5 are affected by a (theoretical) timing attack vulnerability that allows API key extraction over the network. Due to using character based comparison that short-circuits on the first mismatched character during API key validation, rather than a cryptographical method with static runtime regardless of the point of mismatch, an attacker with network based access to an affected OctoPrint could extract API keys valid on the instance by measuring the response times of the denied access responses and guess an API key character by character. The vulnerability is patched in version 1.11.6. The likelihood of this attack actually working is highly dependent on the network's latency, noise and similar parameters. An actual proof of concept was not achieved so far. Still, as always administrators are advised to not expose their OctoPrint instance on hostile networks, especially not on the public Internet. |
| Wasmtime is a runtime for WebAssembly. Starting in version 29.0.0 and prior to version 36.0.5, 40.0.3, and 41.0.1, on x86-64 platforms with AVX, Wasmtime's compilation of the `f64.copysign` WebAssembly instruction with Cranelift may load 8 more bytes than is necessary. When signals-based-traps are disabled this can result in a uncaught segfault due to loading from unmapped guard pages. With guard pages disabled it's possible for out-of-sandbox data to be loaded, but unless there is another bug in Cranelift this data is not visible to WebAssembly guests. Wasmtime 36.0.5, 40.0.3, and 41.0.1 have been released to fix this issue. Users are recommended to upgrade to the patched versions of Wasmtime. Other affected versions are not patched and users should updated to supported major version instead. This bug can be worked around by enabling signals-based-traps. While disabling guard pages can be a quick fix in some situations, it's not recommended to disabled guard pages as it is a key defense-in-depth measure of Wasmtime. |
| pypdf is a free and open-source pure-python PDF library. An attacker who uses an infinite loop vulnerability that is present in versions prior to 6.6.2 can craft a PDF which leads to an infinite loop. This requires accessing the outlines/bookmarks. This has been fixed in pypdf 6.6.2. If projects cannot upgrade yet, consider applying the changes from PR #3610 manually. |
| Kargo manages and automates the promotion of software artifacts. Prior to versions 1.8.7, 1.7.7, and 1.6.3, a bug was found with authentication checks on the `GetConfig()` API endpoint. This allowed unauthenticated users to access this endpoint by specifying an `Authorization` header with any non-empty `Bearer` token value, regardless of validity. This vulnerability did allow for exfiltration of configuration data such as endpoints for connected Argo CD clusters. This data could allow an attacker to enumerate cluster URLs and namespaces for use in subsequent attacks. Additionally, the same bug affected the `RefreshResource` endpoint. This endpoint does not lead to any information disclosure, but could be used by an unauthenticated attacker to perform a denial-of-service style attack against the Kargo API. `RefreshResource` sets an annotation on specific Kubernetes resources to trigger reconciliations. If run on a constant loop, this could also slow down legitimate requests to the Kubernetes API server. This problem has been patched in Kargo versiosn 1.8.7, 1.7.7, and 1.6.3. There are no workarounds for this issue. |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to version 4.11.7, a Cross-Site Scripting (XSS) vulnerability exists in the `ErrorBoundary` component of the hono/jsx library. Under certain usage patterns, untrusted user-controlled strings may be rendered as raw HTML, allowing arbitrary script execution in the victim's browser. Version 4.11.7 patches the issue. |
| Clatter is a no_std compatible, pure Rust implementation of the Noise protocol framework with post-quantum support. Versiosn prior to2.2.0 have a protocol compliance vulnerability. The library allowed post-quantum handshake patterns that violated the PSK validity rule (Noise Protocol Framework Section 9.3). This could allow PSK-derived keys to be used for encryption without proper randomization by self-chosen ephemeral randomness, weakening security guarantees and potentially allowing catastrophic key reuse. Affected default patterns include `noise_pqkk_psk0`, `noise_pqkn_psk0`, `noise_pqnk_psk0`, `noise_pqnn_psk0``, and some hybrid variants. Users of these patterns may have been using handshakes that do not meet the intended security properties. The issue is fully patched and released in Clatter v2.2.0. The fixed version includes runtime checks to detect offending handshake patterns. As a workaround, avoid using offending `*_psk0` variants of post-quantum patterns. Review custom handshake patterns carefully. |
| The ML-DSA crate is a Rust implementation of the Module-Lattice-Based Digital Signature Standard (ML-DSA). Starting in version 0.0.4 and prior to version 0.1.0-rc.4, the ML-DSA signature verification implementation in the RustCrypto `ml-dsa` crate incorrectly accepts signatures with repeated (duplicate) hint indices. According to the ML-DSA specification (FIPS 204 / RFC 9881), hint indices within each polynomial must be **strictly increasing**. The current implementation uses a non-strict monotonic check (`<=` instead of `<`), allowing duplicate indices. This is a regression bug. The original implementation was correct, but a commit in version 0.0.4 inadvertently changed the strict `<` comparison to `<=`, introducing the vulnerability. Version 0.1.0-rc.4 fixes the issue. |
| In GnuPG before 2.5.17, a stack-based buffer overflow exists in tpm2daemon during handling of the PKDECRYPT command for TPM-backed RSA and ECC keys. |
| vlt before 1.0.0-rc.10 mishandles path sanitization for tar, leading to path traversal during extraction. |
| Issue summary: The 'openssl dgst' command-line tool silently truncates input
data to 16MB when using one-shot signing algorithms and reports success instead
of an error.
Impact summary: A user signing or verifying files larger than 16MB with
one-shot algorithms (such as Ed25519, Ed448, or ML-DSA) may believe the entire
file is authenticated while trailing data beyond 16MB remains unauthenticated.
When the 'openssl dgst' command is used with algorithms that only support
one-shot signing (Ed25519, Ed448, ML-DSA-44, ML-DSA-65, ML-DSA-87), the input
is buffered with a 16MB limit. If the input exceeds this limit, the tool
silently truncates to the first 16MB and continues without signaling an error,
contrary to what the documentation states. This creates an integrity gap where
trailing bytes can be modified without detection if both signing and
verification are performed using the same affected codepath.
The issue affects only the command-line tool behavior. Verifiers that process
the full message using library APIs will reject the signature, so the risk
primarily affects workflows that both sign and verify with the affected
'openssl dgst' command. Streaming digest algorithms for 'openssl dgst' and
library users are unaffected.
The FIPS modules in 3.5 and 3.6 are not affected by this issue, as the
command-line tools are outside the OpenSSL FIPS module boundary.
OpenSSL 3.5 and 3.6 are vulnerable to this issue.
OpenSSL 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are not affected by this issue. |
| Podman Desktop is a graphical tool for developing on containers and Kubernetes. A critical authentication bypass vulnerability in Podman Desktop prior to version 1.25.1 allows any extension to completely circumvent permission checks and gain unauthorized access to all authentication sessions. The `isAccessAllowed()` function unconditionally returns `true`, enabling malicious extensions to impersonate any user, hijack authentication sessions, and access sensitive resources without authorization. This vulnerability affects all versions of Podman Desktop. Version 1.25.1 contains a patch for the issue. |
| The Node.js package browserstack-local 1.5.8 contains a command injection vulnerability. This occurs because the logfile variable is not properly sanitized in lib/Local.js. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Versions prior to 2.3.1.2 have an undefined behavior issue when floating-point NaN values are converted to unsigned short integer types during ICC profile XML parsing potentially corrupting memory structures and enabling arbitrary code execution. This vulnerability affects users of the iccDEV library who process ICC color profiles. ICC Profile Injection vulnerabilities arise when user-controllable input is incorporated into ICC profile data or other structured binary blobs in an unsafe manner. Version 2.3.1.2 contains a fix for the issue. No known workarounds are available. |
| NocoDB is software for building databases as spreadsheets. Prior to version 0.301.0, a stored cross-site scripting (XSS) vulnerability exists in NocoDB’s attachment handling mechanism. Authenticated users can upload malicious SVG files containing embedded JavaScript, which are later rendered inline and executed in the browsers of other users who view the attachment. Because the malicious payload is stored server-side and executed under the application’s origin, successful exploitation can lead to account compromise, data exfiltration and unauthorized actions performed on behalf of affected users. Version 0.301.0 patches the issue. |
| OpenProject is an open-source, web-based project management software. Versions prior to 16.6.6 and 17.0.2 have an arbitrary file write vulnerability in OpenProject’s repository diff download endpoint (`/projects/:project_id/repository/diff.diff`) when rendering a single revision via git show. By supplying a specially crafted rev value (for example, `rev=--output=/tmp/poc.txt)`, an attacker can inject git show command-line options. When OpenProject executes the SCM command, Git interprets the attacker-controlled rev as an option and writes the output to an attacker-chosen path. As a result, any user with the `:browse_repository` permission on the project can create or overwrite arbitrary files that the OpenProject process user is permitted to write. The written contents consist of git show output (commit metadata and patch), but overwriting application or configuration files still leads to data loss and denial of service, impacting integrity and availability. The issue has been fixed in OpenProject 17.0.2 and 16.6.6. |
| In the context switch logic Xen attempts to skip an IBPB in the case of
a vCPU returning to a CPU on which it was the previous vCPU to run.
While safe for Xen's isolation between vCPUs, this prevents the guest
kernel correctly isolating between tasks. Consider:
1) vCPU runs on CPU A, running task 1.
2) vCPU moves to CPU B, idle gets scheduled on A. Xen skips IBPB.
3) On CPU B, guest kernel switches from task 1 to 2, issuing IBPB.
4) vCPU moves back to CPU A. Xen skips IBPB again.
Now, task 2 is running on CPU A with task 1's training still in the BTB. |
| EGroupware is a Web based groupware server written in PHP. A SQL Injection vulnerability exists in the core components of EGroupware prior to versions 23.1.20260113 and 26.0.20260113, specifically in the `Nextmatch` filter processing. The flaw allows authenticated attackers to inject arbitrary SQL commands into the `WHERE` clause of database queries. This is achieved by exploiting a PHP type juggling issue where JSON decoding converts numeric strings into integers, bypassing the `is_int()` security check used by the application. Versions 23.1.20260113 and 26.0.20260113 patch the vulnerability. |
| A weakness has been identified in code-projects Online Music Site 1.0. This affects an unknown function of the file /Administrator/PHP/AdminEditUser.php. This manipulation of the argument ID causes sql injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. |
| A security flaw has been discovered in Open5GS up to 2.7.6. This affects the function sgwc_s5c_handle_bearer_resource_failure_indication of the file src/sgwc/s5c-handler.c of the component SGWC. Performing a manipulation results in denial of service. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The patch is named 69b53add90a9479d7960b822fc60601d659c328b. It is recommended to apply a patch to fix this issue. |
| A division-by-zero vulnerability in the flow.floor_divide() component of OneFlow v0.9.0 allows attackers to cause a Denial of Service (DoS) via a crafted input tensor with zero. |
