| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: mcc: prevent shift wrapping in rtw89_core_mlsr_switch()
The "link_id" value comes from the user via debugfs. If it's larger
than BITS_PER_LONG then that would result in shift wrapping and
potentially an out of bounds access later. In fact, we can limit it
to IEEE80211_MLD_MAX_NUM_LINKS (15).
Fortunately, only root can write to debugfs files so the security
impact is minimal. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Decrement TID on RX peer frag setup error handling
Currently, TID is not decremented before peer cleanup, during error
handling path of ath12k_dp_rx_peer_frag_setup(). This could lead to
out-of-bounds access in peer->rx_tid[].
Hence, add a decrement operation for TID, before peer cleanup to
ensures proper cleanup and prevents out-of-bounds access issues when
the RX peer frag setup fails.
Found during code review. Compile tested only. |
| Buffer overflow for some Intel(R) QAT Windows software before version 2.6.0. within Ring 3: User Applications may allow a denial of service. System software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Out-of-bounds read for some Intel(R) QAT Windows software before version 2.6.0. within Ring 3: User Applications may allow a denial of service. System software adversary with an authenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Buffer overflow for some Intel(R) QAT Windows software before version 2.6.0. within Ring 3: User Applications may allow an escalation of privilege. System software adversary with an authenticated user combined with a low complexity attack may enable data manipulation. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iPadOS 17.7.7, iOS 18.5 and iPadOS 18.5, visionOS 2.5, macOS Sonoma 14.7.3, macOS Ventura 13.7.3, macOS Sequoia 15.5, watchOS 11.5. An attacker in physical proximity may be able to cause an out-of-bounds read in kernel memory. |
| A stack-based buffer overflow vulnerability exists in freeFTPd version 1.0.10 and earlier in the handling of the FTP PASS command. When an attacker sends a specially crafted password string, the application fails to validate input length, resulting in memory corruption. This can lead to denial of service or arbitrary code execution. Exploitation requires the anonymous user account to be enabled. |
| Security Point (Windows) of MaLion and MaLionCloud contains a heap-based buffer overflow vulnerability in processing Content-Length. Receiving a specially crafted request from a remote unauthenticated attacker could lead to arbitrary code execution with SYSTEM privilege. |
| Security Point (Windows) of MaLion and MaLionCloud contains a stack-based buffer overflow vulnerability in processing HTTP headers. Receiving a specially crafted request from a remote unauthenticated attacker could lead to arbitrary code execution with SYSTEM privilege. |
| PJSIP is a free and open source multimedia communication library. Prior to version 2.16, Opus PLC may zero-fill the input frame as long as the decoder ptime, while the input frame length, which is based on stream ptime, may be less than that. This issue affects PJSIP users who use the Opus audio codec in receiving direction. The vulnerability can lead to unexpected application termination due to a memory overwrite. This issue has been patched in version 2.16. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.1, 5.4.3, and 5.3.4, when the ESP32-P4 uses its hardware JPEG decoder, the software parser lacks necessary validation checks. A specially crafted (malicious) JPEG image could exploit the parsing routine and trigger an out-of-bounds array access. This issue has been fixed in versions 5.5.2, 5.4.4, and 5.3.5. At time of publication versions 5.5.2, 5.4.4, and 5.3.5 have not been released but are fixed respectively in commits 4b8f585, c79cb4d, and 34e2726. |
| A stack buffer overflow vulnerability has been identified in certain router models. An authenticated attacker may trigger this vulnerability by sending a crafted request, potentially impacting the availability of the device.
Refer to the ' Security Update for ASUS Router Firmware' section on the ASUS Security Advisory for more information. |
| An unauthenticated remote attacker can send a specially crafted Modbus read command to the device which leads to a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: rtl9300: Fix out-of-bounds bug in rtl9300_i2c_smbus_xfer
The data->block[0] variable comes from user. Without proper check,
the variable may be very large to cause an out-of-bounds bug.
Fix this bug by checking the value of data->block[0] first.
1. commit 39244cc75482 ("i2c: ismt: Fix an out-of-bounds bug in
ismt_access()")
2. commit 92fbb6d1296f ("i2c: xgene-slimpro: Fix out-of-bounds bug in
xgene_slimpro_i2c_xfer()") |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/ops-common: ignore migration request to invalid nodes
damon_migrate_pages() tries migration even if the target node is invalid.
If users mistakenly make such invalid requests via
DAMOS_MIGRATE_{HOT,COLD} action, the below kernel BUG can happen.
[ 7831.883495] BUG: unable to handle page fault for address: 0000000000001f48
[ 7831.884160] #PF: supervisor read access in kernel mode
[ 7831.884681] #PF: error_code(0x0000) - not-present page
[ 7831.885203] PGD 0 P4D 0
[ 7831.885468] Oops: Oops: 0000 [#1] SMP PTI
[ 7831.885852] CPU: 31 UID: 0 PID: 94202 Comm: kdamond.0 Not tainted 6.16.0-rc5-mm-new-damon+ #93 PREEMPT(voluntary)
[ 7831.886913] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.el9 04/01/2014
[ 7831.887777] RIP: 0010:__alloc_frozen_pages_noprof (include/linux/mmzone.h:1724 include/linux/mmzone.h:1750 mm/page_alloc.c:4936 mm/page_alloc.c:5137)
[...]
[ 7831.895953] Call Trace:
[ 7831.896195] <TASK>
[ 7831.896397] __folio_alloc_noprof (mm/page_alloc.c:5183 mm/page_alloc.c:5192)
[ 7831.896787] migrate_pages_batch (mm/migrate.c:1189 mm/migrate.c:1851)
[ 7831.897228] ? __pfx_alloc_migration_target (mm/migrate.c:2137)
[ 7831.897735] migrate_pages (mm/migrate.c:2078)
[ 7831.898141] ? __pfx_alloc_migration_target (mm/migrate.c:2137)
[ 7831.898664] damon_migrate_folio_list (mm/damon/ops-common.c:321 mm/damon/ops-common.c:354)
[ 7831.899140] damon_migrate_pages (mm/damon/ops-common.c:405)
[...]
Add a target node validity check in damon_migrate_pages(). The validity
check is stolen from that of do_pages_move(), which is being used for the
move_pages() system call. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Correct tid cleanup when tid setup fails
Currently, if any error occurs during ath12k_dp_rx_peer_tid_setup(),
the tid value is already incremented, even though the corresponding
TID is not actually allocated. Proceed to
ath12k_dp_rx_peer_tid_delete() starting from unallocated tid,
which might leads to freeing unallocated TID and cause potential
crash or out-of-bounds access.
Hence, fix by correctly decrementing tid before cleanup to match only
the successfully allocated TIDs.
Also, remove tid-- from failure case of ath12k_dp_rx_peer_frag_setup(),
as decrementing the tid before cleanup in loop will take care of this.
Compile tested only. |
| Information disclosure when UE receives the RTP packet from the network, while decoding and reassembling the fragments from RTP packet. |
| A vulnerability was found in WebAssembly wabt 1.0.36. It has been declared as critical. This vulnerability affects the function BinaryReaderInterp::GetReturnCallDropKeepCount of the file wabt/src/interp/binary-reader-interp.cc. The manipulation leads to heap-based buffer overflow. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad7173: fix channels index for syscalib_mode
Fix the index used to look up the channel when accessing the
syscalib_mode attribute. The address field is a 0-based index (same
as scan_index) that it used to access the channel in the
ad7173_channels array throughout the driver. The channels field, on
the other hand, may not match the address field depending on the
channel configuration specified in the device tree and could result
in an out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: swap: fix potential buffer overflow in setup_clusters()
In setup_swap_map(), we only ensure badpages are in range (0, last_page].
As maxpages might be < last_page, setup_clusters() will encounter a buffer
overflow when a badpage is >= maxpages.
Only call inc_cluster_info_page() for badpage which is < maxpages to fix
the issue. |
