| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix uaf for flush rq while iterating tags
blk_mq_clear_flush_rq_mapping() is not called during scsi probe, by
checking blk_queue_init_done(). However, QUEUE_FLAG_INIT_DONE is cleared
in del_gendisk by commit aec89dc5d421 ("block: keep q_usage_counter in
atomic mode after del_gendisk"), hence for disk like scsi, following
blk_mq_destroy_queue() will not clear flush rq from tags->rqs[] as well,
cause following uaf that is found by our syzkaller for v6.6:
==================================================================
BUG: KASAN: slab-use-after-free in blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261
Read of size 4 at addr ffff88811c969c20 by task kworker/1:2H/224909
CPU: 1 PID: 224909 Comm: kworker/1:2H Not tainted 6.6.0-ga836a5060850 #32
Workqueue: kblockd blk_mq_timeout_work
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106
print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364
print_report+0x3e/0x70 mm/kasan/report.c:475
kasan_report+0xb8/0xf0 mm/kasan/report.c:588
blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261
bt_iter block/blk-mq-tag.c:288 [inline]
__sbitmap_for_each_set include/linux/sbitmap.h:295 [inline]
sbitmap_for_each_set include/linux/sbitmap.h:316 [inline]
bt_for_each+0x455/0x790 block/blk-mq-tag.c:325
blk_mq_queue_tag_busy_iter+0x320/0x740 block/blk-mq-tag.c:534
blk_mq_timeout_work+0x1a3/0x7b0 block/blk-mq.c:1673
process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631
process_scheduled_works kernel/workqueue.c:2704 [inline]
worker_thread+0x804/0xe40 kernel/workqueue.c:2785
kthread+0x346/0x450 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293
Allocated by task 942:
kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:374 [inline]
__kasan_kmalloc mm/kasan/common.c:383 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:380
kasan_kmalloc include/linux/kasan.h:198 [inline]
__do_kmalloc_node mm/slab_common.c:1007 [inline]
__kmalloc_node+0x69/0x170 mm/slab_common.c:1014
kmalloc_node include/linux/slab.h:620 [inline]
kzalloc_node include/linux/slab.h:732 [inline]
blk_alloc_flush_queue+0x144/0x2f0 block/blk-flush.c:499
blk_mq_alloc_hctx+0x601/0x940 block/blk-mq.c:3788
blk_mq_alloc_and_init_hctx+0x27f/0x330 block/blk-mq.c:4261
blk_mq_realloc_hw_ctxs+0x488/0x5e0 block/blk-mq.c:4294
blk_mq_init_allocated_queue+0x188/0x860 block/blk-mq.c:4350
blk_mq_init_queue_data block/blk-mq.c:4166 [inline]
blk_mq_init_queue+0x8d/0x100 block/blk-mq.c:4176
scsi_alloc_sdev+0x843/0xd50 drivers/scsi/scsi_scan.c:335
scsi_probe_and_add_lun+0x77c/0xde0 drivers/scsi/scsi_scan.c:1189
__scsi_scan_target+0x1fc/0x5a0 drivers/scsi/scsi_scan.c:1727
scsi_scan_channel drivers/scsi/scsi_scan.c:1815 [inline]
scsi_scan_channel+0x14b/0x1e0 drivers/scsi/scsi_scan.c:1791
scsi_scan_host_selected+0x2fe/0x400 drivers/scsi/scsi_scan.c:1844
scsi_scan+0x3a0/0x3f0 drivers/scsi/scsi_sysfs.c:151
store_scan+0x2a/0x60 drivers/scsi/scsi_sysfs.c:191
dev_attr_store+0x5c/0x90 drivers/base/core.c:2388
sysfs_kf_write+0x11c/0x170 fs/sysfs/file.c:136
kernfs_fop_write_iter+0x3fc/0x610 fs/kernfs/file.c:338
call_write_iter include/linux/fs.h:2083 [inline]
new_sync_write+0x1b4/0x2d0 fs/read_write.c:493
vfs_write+0x76c/0xb00 fs/read_write.c:586
ksys_write+0x127/0x250 fs/read_write.c:639
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x78/0xe2
Freed by task 244687:
kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522
____kasan_slab_free mm/kasan/common.c:236 [inline]
__kasan_slab_free+0x12a/0x1b0 mm/kasan/common.c:244
kasan_slab_free include/linux/kasan.h:164 [in
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
sh: intc: Fix use-after-free bug in register_intc_controller()
In the error handling for this function, d is freed without ever
removing it from intc_list which would lead to a use after free.
To fix this, let's only add it to the list after everything has
succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: cancel nfsd_shrinker_work using sync mode in nfs4_state_shutdown_net
In the normal case, when we excute `echo 0 > /proc/fs/nfsd/threads`, the
function `nfs4_state_destroy_net` in `nfs4_state_shutdown_net` will
release all resources related to the hashed `nfs4_client`. If the
`nfsd_client_shrinker` is running concurrently, the `expire_client`
function will first unhash this client and then destroy it. This can
lead to the following warning. Additionally, numerous use-after-free
errors may occur as well.
nfsd_client_shrinker echo 0 > /proc/fs/nfsd/threads
expire_client nfsd_shutdown_net
unhash_client ...
nfs4_state_shutdown_net
/* won't wait shrinker exit */
/* cancel_work(&nn->nfsd_shrinker_work)
* nfsd_file for this /* won't destroy unhashed client1 */
* client1 still alive nfs4_state_destroy_net
*/
nfsd_file_cache_shutdown
/* trigger warning */
kmem_cache_destroy(nfsd_file_slab)
kmem_cache_destroy(nfsd_file_mark_slab)
/* release nfsd_file and mark */
__destroy_client
====================================================================
BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on
__kmem_cache_shutdown()
--------------------------------------------------------------------
CPU: 4 UID: 0 PID: 764 Comm: sh Not tainted 6.12.0-rc3+ #1
dump_stack_lvl+0x53/0x70
slab_err+0xb0/0xf0
__kmem_cache_shutdown+0x15c/0x310
kmem_cache_destroy+0x66/0x160
nfsd_file_cache_shutdown+0xac/0x210 [nfsd]
nfsd_destroy_serv+0x251/0x2a0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
====================================================================
BUG nfsd_file_mark (Tainted: G B W ): Objects remaining
nfsd_file_mark on __kmem_cache_shutdown()
--------------------------------------------------------------------
dump_stack_lvl+0x53/0x70
slab_err+0xb0/0xf0
__kmem_cache_shutdown+0x15c/0x310
kmem_cache_destroy+0x66/0x160
nfsd_file_cache_shutdown+0xc8/0x210 [nfsd]
nfsd_destroy_serv+0x251/0x2a0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
To resolve this issue, cancel `nfsd_shrinker_work` using synchronous
mode in nfs4_state_shutdown_net. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: Add cancel_work_sync before module remove
If we remove the module which will call mpc52xx_spi_remove
it will free 'ms' through spi_unregister_controller.
while the work ms->work will be used. The sequence of operations
that may lead to a UAF bug.
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in mpc52xx_spi_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix possible crash on mgmt_index_removed
If mgmt_index_removed is called while there are commands queued on
cmd_sync it could lead to crashes like the bellow trace:
0x0000053D: __list_del_entry_valid_or_report+0x98/0xdc
0x0000053D: mgmt_pending_remove+0x18/0x58 [bluetooth]
0x0000053E: mgmt_remove_adv_monitor_complete+0x80/0x108 [bluetooth]
0x0000053E: hci_cmd_sync_work+0xbc/0x164 [bluetooth]
So while handling mgmt_index_removed this attempts to dequeue
commands passed as user_data to cmd_sync. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: efifb: Register sysfs groups through driver core
The driver core can register and cleanup sysfs groups already.
Make use of that functionality to simplify the error handling and
cleanup.
Also avoid a UAF race during unregistering where the sysctl attributes
were usable after the info struct was freed. |
| GStreamer is a library for constructing graphs of media-handling components. An Use-After-Free read vulnerability has been discovered affecting the processing of CodecPrivate elements in Matroska streams. In the GST_MATROSKA_ID_CODECPRIVATE case within the gst_matroska_demux_parse_stream function, a data chunk is allocated using gst_ebml_read_binary. Later, the allocated memory is freed in the gst_matroska_track_free function, by the call to g_free (track->codec_priv). Finally, the freed memory is accessed in the caps_serialize function through gst_value_serialize_buffer. The freed memory will be accessed in the gst_value_serialize_buffer function. This results in a UAF read vulnerability, as the function tries to process memory that has already been freed. This vulnerability is fixed in 1.24.10. |
| Vim is an open source, command line text editor. A use-after-free was found in Vim < 9.1.0764. When closing a buffer (visible in a window) a BufWinLeave auto command can cause an use-after-free if this auto command happens to re-open the same buffer in a new split window. Impact is low since the user must have intentionally set up such a strange auto command and run some buffer unload commands. However this may lead to a crash. This issue has been addressed in version 9.1.0764 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| In Eclipse Mosquito, versions from 2.0.0 through 2.0.18, if a Mosquitto broker is configured to create an outgoing bridge connection, and that bridge connection has an incoming topic configured that makes use of topic remapping, then if the remote connection sends a crafted PUBLISH packet to the broker a double free will occur with a subsequent crash of the broker. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix seg fault in rxe_comp_queue_pkt
In rxe_comp_queue_pkt() an incoming response packet skb is enqueued to the
resp_pkts queue and then a decision is made whether to run the completer
task inline or schedule it. Finally the skb is dereferenced to bump a 'hw'
performance counter. This is wrong because if the completer task is
already running in a separate thread it may have already processed the skb
and freed it which can cause a seg fault. This has been observed
infrequently in testing at high scale.
This patch fixes this by changing the order of enqueuing the packet until
after the counter is accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: cdev: Fix use after free in lineinfo_changed_notify
The use-after-free issue occurs as follows: when the GPIO chip device file
is being closed by invoking gpio_chrdev_release(), watched_lines is freed
by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier
chain failed due to waiting write rwsem. Additionally, one of the GPIO
chip's lines is also in the release process and holds the notifier chain's
read rwsem. Consequently, a race condition leads to the use-after-free of
watched_lines.
Here is the typical stack when issue happened:
[free]
gpio_chrdev_release()
--> bitmap_free(cdev->watched_lines) <-- freed
--> blocking_notifier_chain_unregister()
--> down_write(&nh->rwsem) <-- waiting rwsem
--> __down_write_common()
--> rwsem_down_write_slowpath()
--> schedule_preempt_disabled()
--> schedule()
[use]
st54spi_gpio_dev_release()
--> gpio_free()
--> gpiod_free()
--> gpiod_free_commit()
--> gpiod_line_state_notify()
--> blocking_notifier_call_chain()
--> down_read(&nh->rwsem); <-- held rwsem
--> notifier_call_chain()
--> lineinfo_changed_notify()
--> test_bit(xxxx, cdev->watched_lines) <-- use after free
The side effect of the use-after-free issue is that a GPIO line event is
being generated for userspace where it shouldn't. However, since the chrdev
is being closed, userspace won't have the chance to read that event anyway.
To fix the issue, call the bitmap_free() function after the unregistration
of lineinfo_changed_nb notifier chain. |
| libmodbus v3.1.6 was discovered to contain a use-after-free via the ctx->backend pointer. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted message sent to the unit-test-server. |
| FFmpeg n7.0 is affected by a Double Free via the rkmpp_retrieve_frame function within libavcodec/rkmppdec.c. |
| A double-free issue could have occurred in `sec_pkcs7_decoder_start_decrypt()` when handling an error path. Under specific conditions, the same symmetric key could have been freed twice, potentially leading to memory corruption. This vulnerability affects Firefox < 133, Thunderbird < 133, Firefox ESR < 128.7, and Thunderbird < 128.7. |
| In the Linux kernel, the following vulnerability has been resolved:
IORING_OP_READ did not correctly consume the provided buffer list when
read i/o returned < 0 (except for -EAGAIN and -EIOCBQUEUED return).
This can lead to a potential use-after-free when the completion via
io_rw_done runs at separate context. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix potential key use-after-free
When ieee80211_key_link() is called by ieee80211_gtk_rekey_add()
but returns 0 due to KRACK protection (identical key reinstall),
ieee80211_gtk_rekey_add() will still return a pointer into the
key, in a potential use-after-free. This normally doesn't happen
since it's only called by iwlwifi in case of WoWLAN rekey offload
which has its own KRACK protection, but still better to fix, do
that by returning an error code and converting that to success on
the cfg80211 boundary only, leaving the error for bad callers of
ieee80211_gtk_rekey_add(). |
| Use After Free in GitHub repository vim/vim prior to 9.0.1858. |
| libxml2 through 2.11.5 has a use-after-free that can only occur after a certain memory allocation fails. This occurs in xmlUnlinkNode in tree.c. NOTE: the vendor's position is "I don't think these issues are critical enough to warrant a CVE ID ... because an attacker typically can't control when memory allocations fail." |
| A use-after-free vulnerability was discovered in BusyBox v.1.36.1 via a crafted awk pattern in the awk.c copyvar function. |
| A use-after-free vulnerability in BusyBox v.1.36.1 allows attackers to cause a denial of service via a crafted awk pattern in the awk.c evaluate function. |
