| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix use-after-free of network namespace.
Recently, we got a customer report that CIFS triggers oops while
reconnecting to a server. [0]
The workload runs on Kubernetes, and some pods mount CIFS servers
in non-root network namespaces. The problem rarely happened, but
it was always while the pod was dying.
The root cause is wrong reference counting for network namespace.
CIFS uses kernel sockets, which do not hold refcnt of the netns that
the socket belongs to. That means CIFS must ensure the socket is
always freed before its netns; otherwise, use-after-free happens.
The repro steps are roughly:
1. mount CIFS in a non-root netns
2. drop packets from the netns
3. destroy the netns
4. unmount CIFS
We can reproduce the issue quickly with the script [1] below and see
the splat [2] if CONFIG_NET_NS_REFCNT_TRACKER is enabled.
When the socket is TCP, it is hard to guarantee the netns lifetime
without holding refcnt due to async timers.
Let's hold netns refcnt for each socket as done for SMC in commit
9744d2bf1976 ("smc: Fix use-after-free in tcp_write_timer_handler().").
Note that we need to move put_net() from cifs_put_tcp_session() to
clean_demultiplex_info(); otherwise, __sock_create() still could touch a
freed netns while cifsd tries to reconnect from cifs_demultiplex_thread().
Also, maybe_get_net() cannot be put just before __sock_create() because
the code is not under RCU and there is a small chance that the same
address happened to be reallocated to another netns.
[0]:
CIFS: VFS: \\XXXXXXXXXXX has not responded in 15 seconds. Reconnecting...
CIFS: Serverclose failed 4 times, giving up
Unable to handle kernel paging request at virtual address 14de99e461f84a07
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
[14de99e461f84a07] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in: cls_bpf sch_ingress nls_utf8 cifs cifs_arc4 cifs_md4 dns_resolver tcp_diag inet_diag veth xt_state xt_connmark nf_conntrack_netlink xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sm4_ce_cipher sm4 sm3_ce sm3 sha3_ce sha512_ce sha512_arm64 sha1_ce ena button sch_fq_codel loop fuse configfs dmi_sysfs sha2_ce sha256_arm64 dm_mirror dm_region_hash dm_log dm_mod dax efivarfs
CPU: 5 PID: 2690970 Comm: cifsd Not tainted 6.1.103-109.184.amzn2023.aarch64 #1
Hardware name: Amazon EC2 r7g.4xlarge/, BIOS 1.0 11/1/2018
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : fib_rules_lookup+0x44/0x238
lr : __fib_lookup+0x64/0xbc
sp : ffff8000265db790
x29: ffff8000265db790 x28: 0000000000000000 x27: 000000000000bd01
x26: 0000000000000000 x25: ffff000b4baf8000 x24: ffff00047b5e4580
x23: ffff8000265db7e0 x22: 0000000000000000 x21: ffff00047b5e4500
x20: ffff0010e3f694f8 x19: 14de99e461f849f7 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 3f92800abd010002
x11: 0000000000000001 x10: ffff0010e3f69420 x9 : ffff800008a6f294
x8 : 0000000000000000 x7 : 0000000000000006 x6 : 0000000000000000
x5 : 0000000000000001 x4 : ffff001924354280 x3 : ffff8000265db7e0
x2 : 0000000000000000 x1 : ffff0010e3f694f8 x0 : ffff00047b5e4500
Call trace:
fib_rules_lookup+0x44/0x238
__fib_lookup+0x64/0xbc
ip_route_output_key_hash_rcu+0x2c4/0x398
ip_route_output_key_hash+0x60/0x8c
tcp_v4_connect+0x290/0x488
__inet_stream_connect+0x108/0x3d0
inet_stream_connect+0x50/0x78
kernel_connect+0x6c/0xac
generic_ip_conne
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Fix use-after-free, permit out-of-order decoder shutdown
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_decode_reset+0x69/0x190 [cxl_core]
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x5d/0x60 [cxl_core]
At 1) a region has been established with 2 endpoint decoders (7.0 and
14.0). Those endpoints share a common switch-decoder in the topology
(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits
the "out of order reset case" in the switch decoder. The effect though
is that region3 cleanup is aborted leaving it in-tact and
referencing decoder14.0. At 3) the second attempt to teardown region3
trips over the stale decoder14.0 object which has long since been
deleted.
The fix here is to recognize that the CXL specification places no
mandate on in-order shutdown of switch-decoders, the driver enforces
in-order allocation, and hardware enforces in-order commit. So, rather
than fail and leave objects dangling, always remove them.
In support of making cxl_region_decode_reset() always succeed,
cxl_region_invalidate_memregion() failures are turned into warnings.
Crashing the kernel is ok there since system integrity is at risk if
caches cannot be managed around physical address mutation events like
CXL region destruction.
A new device_for_each_child_reverse_from() is added to cleanup
port->commit_end after all dependent decoders have been disabled. In
other words if decoders are allocated 0->1->2 and disabled 1->2->0 then
port->commit_end only decrements from 2 after 2 has been disabled, and
it decrements all the way to zero since 1 was disabled previously. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix possible double free in smb2_set_ea()
Clang static checker(scan-build) warning：
fs/smb/client/smb2ops.c:1304:2: Attempt to free released memory.
1304 | kfree(ea);
| ^~~~~~~~~
There is a double free in such case:
'ea is initialized to NULL' -> 'first successful memory allocation for
ea' -> 'something failed, goto sea_exit' -> 'first memory release for ea'
-> 'goto replay_again' -> 'second goto sea_exit before allocate memory
for ea' -> 'second memory release for ea resulted in double free'.
Re-initialie 'ea' to NULL near to the replay_again label, it can fix this
double free problem. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bpf: must hold reference on net namespace
BUG: KASAN: slab-use-after-free in __nf_unregister_net_hook+0x640/0x6b0
Read of size 8 at addr ffff8880106fe400 by task repro/72=
bpf_nf_link_release+0xda/0x1e0
bpf_link_free+0x139/0x2d0
bpf_link_release+0x68/0x80
__fput+0x414/0xb60
Eric says:
It seems that bpf was able to defer the __nf_unregister_net_hook()
after exit()/close() time.
Perhaps a netns reference is missing, because the netns has been
dismantled/freed already.
bpf_nf_link_attach() does :
link->net = net;
But I do not see a reference being taken on net.
Add such a reference and release it after hook unreg.
Note that I was unable to get syzbot reproducer to work, so I
do not know if this resolves this splat. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix race between laundromat and free_stateid
There is a race between laundromat handling of revoked delegations
and a client sending free_stateid operation. Laundromat thread
finds that delegation has expired and needs to be revoked so it
marks the delegation stid revoked and it puts it on a reaper list
but then it unlock the state lock and the actual delegation revocation
happens without the lock. Once the stid is marked revoked a racing
free_stateid processing thread does the following (1) it calls
list_del_init() which removes it from the reaper list and (2) frees
the delegation stid structure. The laundromat thread ends up not
calling the revoke_delegation() function for this particular delegation
but that means it will no release the lock lease that exists on
the file.
Now, a new open for this file comes in and ends up finding that
lease list isn't empty and calls nfsd_breaker_owns_lease() which ends
up trying to derefence a freed delegation stateid. Leading to the
followint use-after-free KASAN warning:
kernel: ==================================================================
kernel: BUG: KASAN: slab-use-after-free in nfsd_breaker_owns_lease+0x140/0x160 [nfsd]
kernel: Read of size 8 at addr ffff0000e73cd0c8 by task nfsd/6205
kernel:
kernel: CPU: 2 UID: 0 PID: 6205 Comm: nfsd Kdump: loaded Not tainted 6.11.0-rc7+ #9
kernel: Hardware name: Apple Inc. Apple Virtualization Generic Platform, BIOS 2069.0.0.0.0 08/03/2024
kernel: Call trace:
kernel: dump_backtrace+0x98/0x120
kernel: show_stack+0x1c/0x30
kernel: dump_stack_lvl+0x80/0xe8
kernel: print_address_description.constprop.0+0x84/0x390
kernel: print_report+0xa4/0x268
kernel: kasan_report+0xb4/0xf8
kernel: __asan_report_load8_noabort+0x1c/0x28
kernel: nfsd_breaker_owns_lease+0x140/0x160 [nfsd]
kernel: nfsd_file_do_acquire+0xb3c/0x11d0 [nfsd]
kernel: nfsd_file_acquire_opened+0x84/0x110 [nfsd]
kernel: nfs4_get_vfs_file+0x634/0x958 [nfsd]
kernel: nfsd4_process_open2+0xa40/0x1a40 [nfsd]
kernel: nfsd4_open+0xa08/0xe80 [nfsd]
kernel: nfsd4_proc_compound+0xb8c/0x2130 [nfsd]
kernel: nfsd_dispatch+0x22c/0x718 [nfsd]
kernel: svc_process_common+0x8e8/0x1960 [sunrpc]
kernel: svc_process+0x3d4/0x7e0 [sunrpc]
kernel: svc_handle_xprt+0x828/0xe10 [sunrpc]
kernel: svc_recv+0x2cc/0x6a8 [sunrpc]
kernel: nfsd+0x270/0x400 [nfsd]
kernel: kthread+0x288/0x310
kernel: ret_from_fork+0x10/0x20
This patch proposes a fixed that's based on adding 2 new additional
stid's sc_status values that help coordinate between the laundromat
and other operations (nfsd4_free_stateid() and nfsd4_delegreturn()).
First to make sure, that once the stid is marked revoked, it is not
removed by the nfsd4_free_stateid(), the laundromat take a reference
on the stateid. Then, coordinating whether the stid has been put
on the cl_revoked list or we are processing FREE_STATEID and need to
make sure to remove it from the list, each check that state and act
accordingly. If laundromat has added to the cl_revoke list before
the arrival of FREE_STATEID, then nfsd4_free_stateid() knows to remove
it from the list. If nfsd4_free_stateid() finds that operations arrived
before laundromat has placed it on cl_revoke list, it marks the state
freed and then laundromat will no longer add it to the list.
Also, for nfsd4_delegreturn() when looking for the specified stid,
we need to access stid that are marked removed or freeable, it means
the laundromat has started processing it but hasn't finished and this
delegreturn needs to return nfserr_deleg_revoked and not
nfserr_bad_stateid. The latter will not trigger a FREE_STATEID and the
lack of it will leave this stid on the cl_revoked list indefinitely. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: free secondary algorithms names
We need to kfree() secondary algorithms names when reset zram device that
had multi-streams, otherwise we leak memory.
[senozhatsky@chromium.org: kfree(NULL) is legal] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Fix UAF in hci_enhanced_setup_sync
This checks if the ACL connection remains valid as it could be destroyed
while hci_enhanced_setup_sync is pending on cmd_sync leading to the
following trace:
BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0x91b/0xa60
Read of size 1 at addr ffff888002328ffd by task kworker/u5:2/37
CPU: 0 UID: 0 PID: 37 Comm: kworker/u5:2 Not tainted 6.11.0-rc6-01300-g810be445d8d6 #7099
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
? hci_enhanced_setup_sync+0x91b/0xa60
print_report+0x152/0x4c0
? hci_enhanced_setup_sync+0x91b/0xa60
? __virt_addr_valid+0x1fa/0x420
? hci_enhanced_setup_sync+0x91b/0xa60
kasan_report+0xda/0x1b0
? hci_enhanced_setup_sync+0x91b/0xa60
hci_enhanced_setup_sync+0x91b/0xa60
? __pfx_hci_enhanced_setup_sync+0x10/0x10
? __pfx___mutex_lock+0x10/0x10
hci_cmd_sync_work+0x1c2/0x330
process_one_work+0x7d9/0x1360
? __pfx_lock_acquire+0x10/0x10
? __pfx_process_one_work+0x10/0x10
? assign_work+0x167/0x240
worker_thread+0x5b7/0xf60
? __kthread_parkme+0xac/0x1c0
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x293/0x360
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 34:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__hci_conn_add+0x187/0x17d0
hci_connect_sco+0x2e1/0xb90
sco_sock_connect+0x2a2/0xb80
__sys_connect+0x227/0x2a0
__x64_sys_connect+0x6d/0xb0
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 37:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x101/0x160
kfree+0xd0/0x250
device_release+0x9a/0x210
kobject_put+0x151/0x280
hci_conn_del+0x448/0xbf0
hci_abort_conn_sync+0x46f/0x980
hci_cmd_sync_work+0x1c2/0x330
process_one_work+0x7d9/0x1360
worker_thread+0x5b7/0xf60
kthread+0x293/0x360
ret_from_fork+0x2f/0x70
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Reference count the zone in thermal_zone_get_by_id()
There are places in the thermal netlink code where nothing prevents
the thermal zone object from going away while being accessed after it
has been returned by thermal_zone_get_by_id().
To address this, make thermal_zone_get_by_id() get a reference on the
thermal zone device object to be returned with the help of get_device(),
under thermal_list_lock, and adjust all of its callers to this change
with the help of the cleanup.h infrastructure. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Free tzp copy along with the thermal zone
The object pointed to by tz->tzp may still be accessed after being
freed in thermal_zone_device_unregister(), so move the freeing of it
to the point after the removal completion has been completed at which
it cannot be accessed any more. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: Remove LED entry from LEDs list on unregister
Commit c938ab4da0eb ("net: phy: Manual remove LEDs to ensure correct
ordering") correctly fixed a problem with using devm_ but missed
removing the LED entry from the LEDs list.
This cause kernel panic on specific scenario where the port for the PHY
is torn down and up and the kmod for the PHY is removed.
On setting the port down the first time, the assosiacted LEDs are
correctly unregistered. The associated kmod for the PHY is now removed.
The kmod is now added again and the port is now put up, the associated LED
are registered again.
On putting the port down again for the second time after these step, the
LED list now have 4 elements. With the first 2 already unregistered
previously and the 2 new one registered again.
This cause a kernel panic as the first 2 element should have been
removed.
Fix this by correctly removing the element when LED is unregistered. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value
cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it
and return in case of error.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the setting of the server responding flag
In afs_wait_for_operation(), we set transcribe the call responded flag to
the server record that we used after doing the fileserver iteration loop -
but it's possible to exit the loop having had a response from the server
that we've discarded (e.g. it returned an abort or we started receiving
data, but the call didn't complete).
This means that op->server might be NULL, but we don't check that before
attempting to set the server flag. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Increase array size of dummy_boolean
[WHY]
dml2_core_shared_mode_support and dml_core_mode_support access the third
element of dummy_boolean, i.e. hw_debug5 = &s->dummy_boolean[2], when
dummy_boolean has size of 2. Any assignment to hw_debug5 causes an
OVERRUN.
[HOW]
Increase dummy_boolean's array size to 3.
This fixes 2 OVERRUN issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: add list empty check to avoid null pointer issue
Add list empty check to avoid null pointer issues in some corner cases.
- list_for_each_entry_safe() |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a sdiv overflow issue
Zac Ecob reported a problem where a bpf program may cause kernel crash due
to the following error:
Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI
The failure is due to the below signed divide:
LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808.
LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808,
but it is impossible since for 64-bit system, the maximum positive
number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will
cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is
LLONG_MIN.
Further investigation found all the following sdiv/smod cases may trigger
an exception when bpf program is running on x86_64 platform:
- LLONG_MIN/-1 for 64bit operation
- INT_MIN/-1 for 32bit operation
- LLONG_MIN%-1 for 64bit operation
- INT_MIN%-1 for 32bit operation
where -1 can be an immediate or in a register.
On arm64, there are no exceptions:
- LLONG_MIN/-1 = LLONG_MIN
- INT_MIN/-1 = INT_MIN
- LLONG_MIN%-1 = 0
- INT_MIN%-1 = 0
where -1 can be an immediate or in a register.
Insn patching is needed to handle the above cases and the patched codes
produced results aligned with above arm64 result. The below are pseudo
codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0
and the divisor is stored in a register.
sdiv:
tmp = rX
tmp += 1 /* [-1, 0] -> [0, 1]
if tmp >(unsigned) 1 goto L2
if tmp == 0 goto L1
rY = 0
L1:
rY = -rY;
goto L3
L2:
rY /= rX
L3:
smod:
tmp = rX
tmp += 1 /* [-1, 0] -> [0, 1]
if tmp >(unsigned) 1 goto L1
if tmp == 1 (is64 ? goto L2 : goto L3)
rY = 0;
goto L2
L1:
rY %= rX
L2:
goto L4 // only when !is64
L3:
wY = wY // only when !is64
L4:
[1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
mm, slub: avoid zeroing kmalloc redzone
Since commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra
allocated kmalloc space than requested"), setting orig_size treats
the wasted space (object_size - orig_size) as a redzone. However with
init_on_free=1 we clear the full object->size, including the redzone.
Additionally we clear the object metadata, including the stored orig_size,
making it zero, which makes check_object() treat the whole object as a
redzone.
These issues lead to the following BUG report with "slub_debug=FUZ
init_on_free=1":
[ 0.000000] =============================================================================
[ 0.000000] BUG kmalloc-8 (Not tainted): kmalloc Redzone overwritten
[ 0.000000] -----------------------------------------------------------------------------
[ 0.000000]
[ 0.000000] 0xffff000010032858-0xffff00001003285f @offset=2136. First byte 0x0 instead of 0xcc
[ 0.000000] FIX kmalloc-8: Restoring kmalloc Redzone 0xffff000010032858-0xffff00001003285f=0xcc
[ 0.000000] Slab 0xfffffdffc0400c80 objects=36 used=23 fp=0xffff000010032a18 flags=0x3fffe0000000200(workingset|node=0|zone=0|lastcpupid=0x1ffff)
[ 0.000000] Object 0xffff000010032858 @offset=2136 fp=0xffff0000100328c8
[ 0.000000]
[ 0.000000] Redzone ffff000010032850: cc cc cc cc cc cc cc cc ........
[ 0.000000] Object ffff000010032858: cc cc cc cc cc cc cc cc ........
[ 0.000000] Redzone ffff000010032860: cc cc cc cc cc cc cc cc ........
[ 0.000000] Padding ffff0000100328b4: 00 00 00 00 00 00 00 00 00 00 00 00 ............
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.11.0-rc3-next-20240814-00004-g61844c55c3f4 #144
[ 0.000000] Hardware name: NXP i.MX95 19X19 board (DT)
[ 0.000000] Call trace:
[ 0.000000] dump_backtrace+0x90/0xe8
[ 0.000000] show_stack+0x18/0x24
[ 0.000000] dump_stack_lvl+0x74/0x8c
[ 0.000000] dump_stack+0x18/0x24
[ 0.000000] print_trailer+0x150/0x218
[ 0.000000] check_object+0xe4/0x454
[ 0.000000] free_to_partial_list+0x2f8/0x5ec
To address the issue, use orig_size to clear the used area. And restore
the value of orig_size after clear the remaining area.
When CONFIG_SLUB_DEBUG not defined, (get_orig_size()' directly returns
s->object_size. So when using memset to init the area, the size can simply
be orig_size, as orig_size returns object_size when CONFIG_SLUB_DEBUG not
enabled. And orig_size can never be bigger than object_size. |
| In the Linux kernel, the following vulnerability has been resolved:
powercap: intel_rapl: Fix off by one in get_rpi()
The rp->priv->rpi array is either rpi_msr or rpi_tpmi which have
NR_RAPL_PRIMITIVES number of elements. Thus the > needs to be >=
to prevent an off by one access. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Protect against overflow of ALIGN() during iova allocation
Userspace can supply an iova and uptr such that the target iova alignment
becomes really big and ALIGN() overflows which corrupts the selected area
range during allocation. CONFIG_IOMMUFD_TEST can detect this:
WARNING: CPU: 1 PID: 5092 at drivers/iommu/iommufd/io_pagetable.c:268 iopt_alloc_area_pages drivers/iommu/iommufd/io_pagetable.c:268 [inline]
WARNING: CPU: 1 PID: 5092 at drivers/iommu/iommufd/io_pagetable.c:268 iopt_map_pages+0xf95/0x1050 drivers/iommu/iommufd/io_pagetable.c:352
Modules linked in:
CPU: 1 PID: 5092 Comm: syz-executor294 Not tainted 6.10.0-rc5-syzkaller-00294-g3ffea9a7a6f7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
RIP: 0010:iopt_alloc_area_pages drivers/iommu/iommufd/io_pagetable.c:268 [inline]
RIP: 0010:iopt_map_pages+0xf95/0x1050 drivers/iommu/iommufd/io_pagetable.c:352
Code: fc e9 a4 f3 ff ff e8 1a 8b 4c fc 41 be e4 ff ff ff e9 8a f3 ff ff e8 0a 8b 4c fc 90 0f 0b 90 e9 37 f5 ff ff e8 fc 8a 4c fc 90 <0f> 0b 90 e9 68 f3 ff ff 48 c7 c1 ec 82 ad 8f 80 e1 07 80 c1 03 38
RSP: 0018:ffffc90003ebf9e0 EFLAGS: 00010293
RAX: ffffffff85499fa4 RBX: 00000000ffffffef RCX: ffff888079b49e00
RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000
RBP: ffffc90003ebfc50 R08: ffffffff85499b30 R09: ffffffff85499942
R10: 0000000000000002 R11: ffff888079b49e00 R12: ffff8880228e0010
R13: 0000000000000000 R14: 1ffff920007d7f68 R15: ffffc90003ebfd00
FS: 000055557d760380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000005fdeb8 CR3: 000000007404a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
iommufd_ioas_copy+0x610/0x7b0 drivers/iommu/iommufd/ioas.c:274
iommufd_fops_ioctl+0x4d9/0x5a0 drivers/iommu/iommufd/main.c:421
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Cap the automatic alignment to the huge page size, which is probably a
better idea overall. Huge automatic alignments can fragment and chew up
the available IOVA space without any reason. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix oops on non-dbdc mt7986
mt7915_band_config() sets band_idx = 1 on the main phy for mt7986
with MT7975_ONE_ADIE or MT7976_ONE_ADIE.
Commit 0335c034e726 ("wifi: mt76: fix race condition related to
checking tx queue fill status") introduced a dereference of the
phys array indirectly indexed by band_idx via wcid->phy_idx in
mt76_wcid_cleanup(). This caused the following Oops on affected
mt7986 devices:
Unable to handle kernel read from unreadable memory at virtual address 0000000000000024
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
user pgtable: 4k pages, 39-bit VAs, pgdp=0000000042545000
[0000000000000024] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
Internal error: Oops: 0000000096000005 [#1] SMP
Modules linked in: ... mt7915e mt76_connac_lib mt76 mac80211 cfg80211 ...
CPU: 2 PID: 1631 Comm: hostapd Not tainted 5.15.150 #0
Hardware name: ZyXEL EX5700 (Telenor) (DT)
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mt76_wcid_cleanup+0x84/0x22c [mt76]
lr : mt76_wcid_cleanup+0x64/0x22c [mt76]
sp : ffffffc00a803700
x29: ffffffc00a803700 x28: ffffff80008f7300 x27: ffffff80003f3c00
x26: ffffff80000a7880 x25: ffffffc008c26e00 x24: 0000000000000001
x23: ffffffc000a68114 x22: 0000000000000000 x21: ffffff8004172cc8
x20: ffffffc00a803748 x19: ffffff8004152020 x18: 0000000000000000
x17: 00000000000017c0 x16: ffffffc008ef5000 x15: 0000000000000be0
x14: ffffff8004172e28 x13: ffffff8004172e28 x12: 0000000000000000
x11: 0000000000000000 x10: ffffff8004172e30 x9 : ffffff8004172e28
x8 : 0000000000000000 x7 : ffffff8004156020 x6 : 0000000000000000
x5 : 0000000000000031 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000000 x1 : ffffff80008f7300 x0 : 0000000000000024
Call trace:
mt76_wcid_cleanup+0x84/0x22c [mt76]
__mt76_sta_remove+0x70/0xbc [mt76]
mt76_sta_state+0x8c/0x1a4 [mt76]
mt7915_eeprom_get_power_delta+0x11e4/0x23a0 [mt7915e]
drv_sta_state+0x144/0x274 [mac80211]
sta_info_move_state+0x1cc/0x2a4 [mac80211]
sta_set_sinfo+0xaf8/0xc24 [mac80211]
sta_info_destroy_addr_bss+0x4c/0x6c [mac80211]
ieee80211_color_change_finish+0x1c08/0x1e70 [mac80211]
cfg80211_check_station_change+0x1360/0x4710 [cfg80211]
genl_family_rcv_msg_doit+0xb4/0x110
genl_rcv_msg+0xd0/0x1bc
netlink_rcv_skb+0x58/0x120
genl_rcv+0x34/0x50
netlink_unicast+0x1f0/0x2ec
netlink_sendmsg+0x198/0x3d0
____sys_sendmsg+0x1b0/0x210
___sys_sendmsg+0x80/0xf0
__sys_sendmsg+0x44/0xa0
__arm64_sys_sendmsg+0x20/0x30
invoke_syscall.constprop.0+0x4c/0xe0
do_el0_svc+0x40/0xd0
el0_svc+0x14/0x4c
el0t_64_sync_handler+0x100/0x110
el0t_64_sync+0x15c/0x160
Code: d2800002 910092c0 52800023 f9800011 (885f7c01)
---[ end trace 7e42dd9a39ed2281 ]---
Fix by using mt76_dev_phy() which will map band_idx to the correct phy
for all hardware combinations. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, lsm: Add check for BPF LSM return value
A bpf prog returning a positive number attached to file_alloc_security
hook makes kernel panic.
This happens because file system can not filter out the positive number
returned by the LSM prog using IS_ERR, and misinterprets this positive
number as a file pointer.
Given that hook file_alloc_security never returned positive number
before the introduction of BPF LSM, and other BPF LSM hooks may
encounter similar issues, this patch adds LSM return value check
in verifier, to ensure no unexpected value is returned. |
