| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: Initialize netdev pointer before queue setup
In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq().
However, the pointer to this structure is stored in oct->props[i].netdev
only after the calls to netif_set_real_num_rx_queues() and
netif_set_real_num_tx_queues().
If either of these functions fails, setup_nic_devices() returns an error
without freeing the allocated netdev. Since oct->props[i].netdev is still
NULL at this point, the cleanup function liquidio_destroy_nic_device()
will fail to find and free the netdev, resulting in a memory leak.
Fix this by initializing oct->props[i].netdev before calling the queue
setup functions. This ensures that the netdev is properly accessible for
cleanup in case of errors.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Fix stats report corruption on queue count change
The driver and the NIC share a region in memory for stats reporting.
The NIC calculates its offset into this region based on the total size
of the stats region and the size of the NIC's stats.
When the number of queues is changed, the driver's stats region is
resized. If the queue count is increased, the NIC can write past
the end of the allocated stats region, causing memory corruption.
If the queue count is decreased, there is a gap between the driver
and NIC stats, leading to incorrect stats reporting.
This change fixes the issue by allocating stats region with maximum
size, and the offset calculation for NIC stats is changed to match
with the calculation of the NIC. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes
During SPO tests, when mounting F2FS, an -EINVAL error was returned from
f2fs_recover_inode_page. The issue occurred under the following scenario
Thread A Thread B
f2fs_ioc_commit_atomic_write
- f2fs_do_sync_file // atomic = true
- f2fs_fsync_node_pages
: last_folio = inode folio
: schedule before folio_lock(last_folio) f2fs_write_checkpoint
- block_operations// writeback last_folio
- schedule before f2fs_flush_nat_entries
: set_fsync_mark(last_folio, 1)
: set_dentry_mark(last_folio, 1)
: folio_mark_dirty(last_folio)
- __write_node_folio(last_folio)
: f2fs_down_read(&sbi->node_write)//block
- f2fs_flush_nat_entries
: {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED)
- unblock_operations
: f2fs_up_write(&sbi->node_write)
f2fs_write_checkpoint//return
: f2fs_do_write_node_page()
f2fs_ioc_commit_atomic_write//return
SPO
Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has
already been written once. However, the {struct nat_entry}->flag did not
have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and
write last_folio again after Thread B finishes f2fs_write_checkpoint.
After SPO and reboot, it was detected that {struct node_info}->blk_addr
was not NULL_ADDR because Thread B successfully write the checkpoint.
This issue only occurs in atomic write scenarios. For regular file
fsync operations, the folio must be dirty. If
block_operations->f2fs_sync_node_pages successfully submit the folio
write, this path will not be executed. Otherwise, the
f2fs_write_checkpoint will need to wait for the folio write submission
to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the
situation where f2fs_need_dentry_mark checks that the {struct
nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has
already been submitted, will not occur.
Therefore, for atomic file fsync, sbi->node_write should be acquired
through __write_node_folio to ensure that the IS_CHECKPOINTED flag
correctly indicates that the checkpoint write has been completed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gro: fix outer network offset
The udp GRO complete stage assumes that all the packets inserted the RX
have the `encapsulation` flag zeroed. Such assumption is not true, as a
few H/W NICs can set such flag when H/W offloading the checksum for
an UDP encapsulated traffic, the tun driver can inject GSO packets with
UDP encapsulation and the problematic layout can also be created via
a veth based setup.
Due to the above, in the problematic scenarios, udp4_gro_complete() uses
the wrong network offset (inner instead of outer) to compute the outer
UDP header pseudo checksum, leading to csum validation errors later on
in packet processing.
Address the issue always clearing the encapsulation flag at GRO completion
time. Such flag will be set again as needed for encapsulated packets by
udp_gro_complete(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks
As Paolo said earlier [1]:
"Since the blamed commit below, classify can return TC_ACT_CONSUMED while
the current skb being held by the defragmentation engine. As reported by
GangMin Kim, if such packet is that may cause a UaF when the defrag engine
later on tries to tuch again such packet."
act_ct was never meant to be used in the egress path, however some users
are attaching it to egress today [2]. Attempting to reach a middle
ground, we noticed that, while most qdiscs are not handling
TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we
address the issue by only allowing act_ct to bind to clsact/ingress
qdiscs and shared blocks. That way it's still possible to attach act_ct to
egress (albeit only with clsact).
[1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/
[2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/ |
| The Post SMTP – Complete Email Deliverability and SMTP Solution with Email Logs, Alerts, Backup SMTP & Mobile App plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘event_type’ parameter in all versions up to, and including, 3.8.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The vulnerability is only exploitable when the Post SMTP Pro plugin is also installed and its Reporting and Tracking extension is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: validate DFA start states are in bounds in unpack_pdb
Start states are read from untrusted data and used as indexes into the
DFA state tables. The aa_dfa_next() function call in unpack_pdb() will
access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds
the number of states in the DFA, this results in an out-of-bound read.
==================================================================
BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360
Read of size 4 at addr ffff88811956fb90 by task su/1097
...
Reject policies with out-of-bounds start states during unpacking
to prevent the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add proper RCU protection to /proc/net/ptype
Yin Fengwei reported an RCU stall in ptype_seq_show() and provided
a patch.
Real issue is that ptype_seq_next() and ptype_seq_show() violate
RCU rules.
ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev
to get device name without any barrier.
At the same time, concurrent writers can remove a packet_type structure
(which is correctly freed after an RCU grace period) and clear pt->dev
without an RCU grace period.
Define ptype_iter_state to carry a dev pointer along seq_net_private:
struct ptype_iter_state {
struct seq_net_private p;
struct net_device *dev; // added in this patch
};
We need to record the device pointer in ptype_get_idx() and
ptype_seq_next() so that ptype_seq_show() is safe against
concurrent pt->dev changes.
We also need to add full RCU protection in ptype_seq_next().
(Missing READ_ONCE() when reading list.next values)
Many thanks to Dong Chenchen for providing a repro. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-core: fix wrong reinitialization of ringbuffer on reopen
dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the
DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which
reinitializes the waitqueue list head to empty.
Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the
same DVR device share it), this orphans any existing waitqueue entries
from io_uring poll or epoll, leaving them with stale prev/next pointers
while the list head is reset to {self, self}.
The waitqueue and spinlock in dvr_buffer are already properly
initialized once in dvb_dmxdev_init(). The open path only needs to
reset the buffer data pointer, size, and read/write positions.
Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct
assignment of data/size and a call to dvb_ringbuffer_reset(), which
properly resets pread, pwrite, and error with correct memory ordering
without touching the waitqueue or spinlock. |
| GNU Binutils thru 2.46 readelf contains a vulnerability that leads to an invalid pointer free when processing a crafted ELF binary with malformed relocation or symbol data. If dump_relocations returns early due to parsing errors, the internal all_relocations array may remain partially uninitialized. Later, process_got_section_contents() may attempt to free an invalid r_symbol pointer, triggering memory corruption checks in glibc and causing the program to terminate with SIGABRT. No evidence of further memory corruption or code execution was observed; the impact is limited to denial of service. NOTE: this is disputed by third parties because the observed behavior occurred only in pre-release code and did not affect any tagged version. |
| GNU Binutils thru 2.46 readelf contains a double free vulnerability when processing a crafted ELF binary with malformed relocation data. During GOT relocation handling, dump_relocations may return early without initializing the all_relocations array. As a result, process_got_section_contents() may pass an uninitialized r_symbol pointer to free(), leading to a double free and terminating the program with SIGABRT. No evidence of exploitable memory corruption or code execution was observed; the impact is limited to denial of service. NOTE: this is disputed by third parties because the observed behavior occurred only in pre-release code and did not affect any tagged version. |
| Deserialization of untrusted data in Microsoft Office SharePoint allows an authorized attacker to execute code over a network. |
| Improper input validation in the apps and endpoints configuration in PowerShell Universal before 2026.1.4 allows an authenticated user with permissions to create or modify Apps or Endpoints to override existing application or system routes, resulting in unintended request routing and denial of service via a conflicting URL path. |
| Missing authorization checks on multiple gRPC service endpoints in PowerShell Universal before 2026.1.4 allows an authenticated user with any valid token to bypass role-based access controls and perform privileged operations — including reading sensitive data, creating or deleting resources, and disrupting service operations — via crafted gRPC requests. |
| Adobe Commerce versions 2.4.9-alpha2, 2.4.8-p2, 2.4.7-p7, 2.4.6-p12, 2.4.5-p14, 2.4.4-p15 and earlier are affected by an Improper Input Validation vulnerability. A successful attacker can abuse this to achieve session takeover, increasing the confidentiality, and integrity impact to high. Exploitation of this issue does not require user interaction. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Livy.
This issue affects Apache Livy: from 0.3.0 before 0.9.0.
The vulnerability can only be exploited with non-default Apache Livy Server settings. If the configuration value "livy.file.local-dir-whitelist" is set to a non-default value, the directory checking can be bypassed.
Users are recommended to upgrade to version 0.9.0, which fixes the issue. |
| An out-of-bounds read vulnerability exists in the EMF functionality of Canva Affinity. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out-of-bounds read, potentially leading to the disclosure of sensitive information. |
| An out‑of‑bounds write vulnerability exists in the EMF functionality of Canva Affinity. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out‑of‑bounds write, potentially leading to code execution. |
| An out-of-bounds read vulnerability exists in the EMF functionality of Canva Affinity. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out-of-bounds read, potentially leading to the disclosure of sensitive information. |
| An out-of-bounds read vulnerability exists in the EMF functionality of Canva Affinity. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out-of-bounds read, potentially leading to the disclosure of sensitive information. |
