| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rcu/nocb: Fix possible invalid rdp's->nocb_cb_kthread pointer access
In the preparation stage of CPU online, if the corresponding
the rdp's->nocb_cb_kthread does not exist, will be created,
there is a situation where the rdp's rcuop kthreads creation fails,
and then de-offload this CPU's rdp, does not assign this CPU's
rdp->nocb_cb_kthread pointer, but this rdp's->nocb_gp_rdp and
rdp's->rdp_gp->nocb_gp_kthread is still valid.
This will cause the subsequent re-offload operation of this offline
CPU, which will pass the conditional check and the kthread_unpark()
will access invalid rdp's->nocb_cb_kthread pointer.
This commit therefore use rdp's->nocb_gp_kthread instead of
rdp_gp's->nocb_gp_kthread for safety check. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: No more self recovery
When a node withdraws and it turns out that it is the only node that has
the filesystem mounted, gfs2 currently tries to replay the local journal
to bring the filesystem back into a consistent state. Not only is that
a very bad idea, it has also never worked because gfs2_recover_func()
will refuse to do anything during a withdraw.
However, before even getting to this point, gfs2_recover_func()
dereferences sdp->sd_jdesc->jd_inode. This was a use-after-free before
commit 04133b607a78 ("gfs2: Prevent double iput for journal on error")
and is a NULL pointer dereference since then.
Simply get rid of self recovery to fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: compress: fix UAF of f2fs_inode_info in f2fs_free_dic
The decompress_io_ctx may be released asynchronously after
I/O completion. If this file is deleted immediately after read,
and the kworker of processing post_read_wq has not been executed yet
due to high workloads, It is possible that the inode(f2fs_inode_info)
is evicted and freed before it is used f2fs_free_dic.
The UAF case as below:
Thread A Thread B
- f2fs_decompress_end_io
- f2fs_put_dic
- queue_work
add free_dic work to post_read_wq
- do_unlink
- iput
- evict
- call_rcu
This file is deleted after read.
Thread C kworker to process post_read_wq
- rcu_do_batch
- f2fs_free_inode
- kmem_cache_free
inode is freed by rcu
- process_scheduled_works
- f2fs_late_free_dic
- f2fs_free_dic
- f2fs_release_decomp_mem
read (dic->inode)->i_compress_algorithm
This patch store compress_algorithm and sbi in dic to avoid inode UAF.
In addition, the previous solution is deprecated in [1] may cause system hang.
[1] https://lore.kernel.org/all/c36ab955-c8db-4a8b-a9d0-f07b5f426c3f@kernel.org |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to trigger foreground gc during f2fs_map_blocks() in lfs mode
w/ "mode=lfs" mount option, generic/299 will cause system panic as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2835!
Call Trace:
<TASK>
f2fs_allocate_data_block+0x6f4/0xc50
f2fs_map_blocks+0x970/0x1550
f2fs_iomap_begin+0xb2/0x1e0
iomap_iter+0x1d6/0x430
__iomap_dio_rw+0x208/0x9a0
f2fs_file_write_iter+0x6b3/0xfa0
aio_write+0x15d/0x2e0
io_submit_one+0x55e/0xab0
__x64_sys_io_submit+0xa5/0x230
do_syscall_64+0x84/0x2f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0010:new_curseg+0x70f/0x720
The root cause of we run out-of-space is: in f2fs_map_blocks(), f2fs may
trigger foreground gc only if it allocates any physical block, it will be
a little bit later when there is multiple threads writing data w/
aio/dio/bufio method in parallel, since we always use OPU in lfs mode, so
f2fs_map_blocks() does block allocations aggressively.
In order to fix this issue, let's give a chance to trigger foreground
gc in prior to block allocation in f2fs_map_blocks(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Add basic validation for RAS header
If RAS header read from EEPROM is corrupted, it could result in trying
to allocate huge memory for reading the records. Add some validation to
header fields. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix use-after-free in vhci_flush()
syzbot reported use-after-free in vhci_flush() without repro. [0]
From the splat, a thread close()d a vhci file descriptor while
its device was being used by iotcl() on another thread.
Once the last fd refcnt is released, vhci_release() calls
hci_unregister_dev(), hci_free_dev(), and kfree() for struct
vhci_data, which is set to hci_dev->dev->driver_data.
The problem is that there is no synchronisation after unlinking
hdev from hci_dev_list in hci_unregister_dev(). There might be
another thread still accessing the hdev which was fetched before
the unlink operation.
We can use SRCU for such synchronisation.
Let's run hci_dev_reset() under SRCU and wait for its completion
in hci_unregister_dev().
Another option would be to restore hci_dev->destruct(), which was
removed in commit 587ae086f6e4 ("Bluetooth: Remove unused
hci-destruct cb"). However, this would not be a good solution, as
we should not run hci_unregister_dev() while there are in-flight
ioctl() requests, which could lead to another data-race KCSAN splat.
Note that other drivers seem to have the same problem, for exmaple,
virtbt_remove().
[0]:
BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718
CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
skb_queue_purge include/linux/skbuff.h:3368 [inline]
vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69
hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline]
hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592
sock_do_ioctl+0xd9/0x300 net/socket.c:1190
sock_ioctl+0x576/0x790 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcf5b98e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929
RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009
RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528
</TASK>
Allocated by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635
misc_open+0x2bc/0x330 drivers/char/misc.c:161
chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414
do_dentry_open+0xdf0/0x1970 fs/open.c:964
vfs_open+0x3b/0x340 fs/open.c:1094
do_open fs/namei.c:3887 [inline]
path_openat+0x2ee5/0x3830 fs/name
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: clear the dst when changing skb protocol
A not-so-careful NAT46 BPF program can crash the kernel
if it indiscriminately flips ingress packets from v4 to v6:
BUG: kernel NULL pointer dereference, address: 0000000000000000
ip6_rcv_core (net/ipv6/ip6_input.c:190:20)
ipv6_rcv (net/ipv6/ip6_input.c:306:8)
process_backlog (net/core/dev.c:6186:4)
napi_poll (net/core/dev.c:6906:9)
net_rx_action (net/core/dev.c:7028:13)
do_softirq (kernel/softirq.c:462:3)
netif_rx (net/core/dev.c:5326:3)
dev_loopback_xmit (net/core/dev.c:4015:2)
ip_mc_finish_output (net/ipv4/ip_output.c:363:8)
NF_HOOK (./include/linux/netfilter.h:314:9)
ip_mc_output (net/ipv4/ip_output.c:400:5)
dst_output (./include/net/dst.h:459:9)
ip_local_out (net/ipv4/ip_output.c:130:9)
ip_send_skb (net/ipv4/ip_output.c:1496:8)
udp_send_skb (net/ipv4/udp.c:1040:8)
udp_sendmsg (net/ipv4/udp.c:1328:10)
The output interface has a 4->6 program attached at ingress.
We try to loop the multicast skb back to the sending socket.
Ingress BPF runs as part of netif_rx(), pushes a valid v6 hdr
and changes skb->protocol to v6. We enter ip6_rcv_core which
tries to use skb_dst(). But the dst is still an IPv4 one left
after IPv4 mcast output.
Clear the dst in all BPF helpers which change the protocol.
Try to preserve metadata dsts, those may carry non-routing
metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: zone: fix to avoid inconsistence in between SIT and SSA
w/ below testcase, it will cause inconsistence in between SIT and SSA.
create_null_blk 512 2 1024 1024
mkfs.f2fs -m /dev/nullb0
mount /dev/nullb0 /mnt/f2fs/
touch /mnt/f2fs/file
f2fs_io pinfile set /mnt/f2fs/file
fallocate -l 4GiB /mnt/f2fs/file
F2FS-fs (nullb0): Inconsistent segment (0) type [1, 0] in SSA and SIT
CPU: 5 UID: 0 PID: 2398 Comm: fallocate Tainted: G O 6.13.0-rc1 #84
Tainted: [O]=OOT_MODULE
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Call Trace:
<TASK>
dump_stack_lvl+0xb3/0xd0
dump_stack+0x14/0x20
f2fs_handle_critical_error+0x18c/0x220 [f2fs]
f2fs_stop_checkpoint+0x38/0x50 [f2fs]
do_garbage_collect+0x674/0x6e0 [f2fs]
f2fs_gc_range+0x12b/0x230 [f2fs]
f2fs_allocate_pinning_section+0x5c/0x150 [f2fs]
f2fs_expand_inode_data+0x1cc/0x3c0 [f2fs]
f2fs_fallocate+0x3c3/0x410 [f2fs]
vfs_fallocate+0x15f/0x4b0
__x64_sys_fallocate+0x4a/0x80
x64_sys_call+0x15e8/0x1b80
do_syscall_64+0x68/0x130
entry_SYSCALL_64_after_hwframe+0x67/0x6f
RIP: 0033:0x7f9dba5197ca
F2FS-fs (nullb0): Stopped filesystem due to reason: 4
The reason is f2fs_gc_range() may try to migrate block in curseg, however,
its SSA block is not uptodate due to the last summary block data is still
in cache of curseg.
In this patch, we add a condition in f2fs_gc_range() to check whether
section is opened or not, and skip block migration for opened section. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: prevent overflow in lookup table allocation
When calculating the lookup table size, ensure the following
multiplication does not overflow:
- desc->field_len[] maximum value is U8_MAX multiplied by
NFT_PIPAPO_GROUPS_PER_BYTE(f) that can be 2, worst case.
- NFT_PIPAPO_BUCKETS(f->bb) is 2^8, worst case.
- sizeof(unsigned long), from sizeof(*f->lt), lt in
struct nft_pipapo_field.
Then, use check_mul_overflow() to multiply by bucket size and then use
check_add_overflow() to the alignment for avx2 (if needed). Finally, add
lt_size_check_overflow() helper and use it to consolidate this.
While at it, replace leftover allocation using the GFP_KERNEL to
GFP_KERNEL_ACCOUNT for consistency, in pipapo_resize(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Kill timer properly at removal
The USB-audio MIDI code initializes the timer, but in a rare case, the
driver might be freed without the disconnect call. This leaves the
timer in an active state while the assigned object is released via
snd_usbmidi_free(), which ends up with a kernel warning when the debug
configuration is enabled, as spotted by fuzzer.
For avoiding the problem, put timer_shutdown_sync() at
snd_usbmidi_free(), so that the timer can be killed properly.
While we're at it, replace the existing timer_delete_sync() at the
disconnect callback with timer_shutdown_sync(), too. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: always recalculate features after XDP clearing, fix null-deref
Recalculate features when XDP is detached.
Before:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: off [requested on]
After:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: on
The fact that HW-GRO doesn't get re-enabled automatically is just
a minor annoyance. The real issue is that the features will randomly
come back during another reconfiguration which just happens to invoke
netdev_update_features(). The driver doesn't handle reconfiguring
two things at a time very robustly.
Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") we only reconfigure the RSS hash table
if the "effective" number of Rx rings has changed. If HW-GRO is
enabled "effective" number of rings is 2x what user sees.
So if we are in the bad state, with HW-GRO re-enablement "pending"
after XDP off, and we lower the rings by / 2 - the HW-GRO rings
doing 2x and the ethtool -L doing / 2 may cancel each other out,
and the:
if (old_rx_rings != bp->hw_resc.resv_rx_rings &&
condition in __bnxt_reserve_rings() will be false.
The RSS map won't get updated, and we'll crash with:
BUG: kernel NULL pointer dereference, address: 0000000000000168
RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0
bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180
__bnxt_setup_vnic_p5+0x58/0x110
bnxt_init_nic+0xb72/0xf50
__bnxt_open_nic+0x40d/0xab0
bnxt_open_nic+0x2b/0x60
ethtool_set_channels+0x18c/0x1d0
As we try to access a freed ring.
The issue is present since XDP support was added, really, but
prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") it wasn't causing major issues. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fec: handle page_pool_dev_alloc_pages error
The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did
not handle the case when it returned NULL. There was a WARN_ON(!new_page)
but it would still proceed to use the NULL pointer and then crash.
This case does seem somewhat rare but when the system is under memory
pressure it can happen. One case where I can duplicate this with some
frequency is when writing over a smbd share to a SATA HDD attached to an
imx6q.
Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve
the problem for my test case. But it still seems wrong that the fec driver
ignores the memory allocation error and can crash.
This commit handles the allocation error by dropping the current packet. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix TSO DMA API usage causing oops
Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap
for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s
members to be later in stmmac_tso_xmit().
The buf (dma cookie) and len stored in this structure are passed to
dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that
the dma cookie passed to dma_unmap_single() is the same as the value
returned from dma_map_single(). However, by moving the assignment
later, this is not the case when priv->dma_cap.addr64 > 32 as "des"
is offset by proto_hdr_len.
This causes problems such as:
dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed
and with DMA_API_DEBUG enabled:
DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes]
Fix this by maintaining "des" as the original DMA cookie, and use
tso_des to pass the offset DMA cookie to stmmac_tso_allocator().
Full details of the crashes can be found at:
https://lore.kernel.org/all/d8112193-0386-4e14-b516-37c2d838171a@nvidia.com/
https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: allocate vf_state during PF probes
In the previous implementation, vf_state is allocated memory only when VF
is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before
VF is enabled to configure the MAC address of VF. If this is the case,
enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null
pointer. The simplified error log is as follows.
root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89
[ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
[ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy
[ 173.641973] lr : do_setlink+0x4a8/0xec8
[ 173.732292] Call trace:
[ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80
[ 173.738847] __rtnl_newlink+0x530/0x89c
[ 173.742692] rtnl_newlink+0x50/0x7c
[ 173.746189] rtnetlink_rcv_msg+0x128/0x390
[ 173.750298] netlink_rcv_skb+0x60/0x130
[ 173.754145] rtnetlink_rcv+0x18/0x24
[ 173.757731] netlink_unicast+0x318/0x380
[ 173.761665] netlink_sendmsg+0x17c/0x3c8 |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: improve shutdown sequence
Alexander Sverdlin presents 2 problems during shutdown with the
lan9303 driver. One is specific to lan9303 and the other just happens
to reproduce there.
The first problem is that lan9303 is unique among DSA drivers in that it
calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown,
not remove):
phy_state_machine()
-> ...
-> dsa_user_phy_read()
-> ds->ops->phy_read()
-> lan9303_phy_read()
-> chip->ops->phy_read()
-> lan9303_mdio_phy_read()
-> dev_get_drvdata()
But we never stop the phy_state_machine(), so it may continue to run
after dsa_switch_shutdown(). Our common pattern in all DSA drivers is
to set drvdata to NULL to suppress the remove() method that may come
afterwards. But in this case it will result in an NPD.
The second problem is that the way in which we set
dp->conduit->dsa_ptr = NULL; is concurrent with receive packet
processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL,
but afterwards, rather than continuing to use that non-NULL value,
dev->dsa_ptr is dereferenced again and again without NULL checks:
dsa_conduit_find_user() and many other places. In between dereferences,
there is no locking to ensure that what was valid once continues to be
valid.
Both problems have the common aspect that closing the conduit interface
solves them.
In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN
event in dsa_user_netdevice_event() which closes user ports as well.
dsa_port_disable_rt() calls phylink_stop(), which synchronously stops
the phylink state machine, and ds->ops->phy_read() will thus no longer
call into the driver after this point.
In the second case, dev_close(conduit) should do this, as per
Documentation/networking/driver.rst:
| Quiescence
| ----------
|
| After the ndo_stop routine has been called, the hardware must
| not receive or transmit any data. All in flight packets must
| be aborted. If necessary, poll or wait for completion of
| any reset commands.
So it should be sufficient to ensure that later, when we zeroize
conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call
on this conduit.
The addition of the netif_device_detach() function is to ensure that
ioctls, rtnetlinks and ethtool requests on the user ports no longer
propagate down to the driver - we're no longer prepared to handle them.
The race condition actually did not exist when commit 0650bf52b31f
("net: dsa: be compatible with masters which unregister on shutdown")
first introduced dsa_switch_shutdown(). It was created later, when we
stopped unregistering the user interfaces from a bad spot, and we just
replaced that sequence with a racy zeroization of conduit->dsa_ptr
(one which doesn't ensure that the interfaces aren't up). |
| In the Linux kernel, the following vulnerability has been resolved:
net: gso: fix tcp fraglist segmentation after pull from frag_list
Detect tcp gso fraglist skbs with corrupted geometry (see below) and
pass these to skb_segment instead of skb_segment_list, as the first
can segment them correctly.
Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size
Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify these skbs, breaking these invariants.
In extreme cases they pull all data into skb linear. For TCP, this
causes a NULL ptr deref in __tcpv4_gso_segment_list_csum at
tcp_hdr(seg->next).
Detect invalid geometry due to pull, by checking head_skb size.
Don't just drop, as this may blackhole a destination. Convert to be
able to pass to regular skb_segment.
Approach and description based on a patch by Willem de Bruijn. |
| In the Linux kernel, the following vulnerability has been resolved:
dlm: fix possible lkb_resource null dereference
This patch fixes a possible null pointer dereference when this function is
called from request_lock() as lkb->lkb_resource is not assigned yet,
only after validate_lock_args() by calling attach_lkb(). Another issue
is that a resource name could be a non printable bytearray and we cannot
assume to be ASCII coded.
The log functionality is probably never being hit when DLM is used in
normal way and no debug logging is enabled. The null pointer dereference
can only occur on a new created lkb that does not have the resource
assigned yet, it probably never hits the null pointer dereference but we
should be sure that other changes might not change this behaviour and we
actually can hit the mentioned null pointer dereference.
In this patch we just drop the printout of the resource name, the lkb id
is enough to make a possible connection to a resource name if this
exists. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: Move unregister out of atomic section
Commit '9329933699b3 ("soc: qcom: pmic_glink: Make client-lock
non-sleeping")' moved the pmic_glink client list under a spinlock, as it
is accessed by the rpmsg/glink callback, which in turn is invoked from
IRQ context.
This means that ucsi_unregister() is now called from atomic context,
which isn't feasible as it's expecting a sleepable context. An effort is
under way to get GLINK to invoke its callbacks in a sleepable context,
but until then lets schedule the unregistration.
A side effect of this is that ucsi_unregister() can now happen
after the remote processor, and thereby the communication link with it, is
gone. pmic_glink_send() is amended with a check to avoid the resulting NULL
pointer dereference.
This does however result in the user being informed about this error by
the following entry in the kernel log:
ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI write request: -5 |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: pass explicit offset/count to trace events
nfs_folio_length is unsafe to use without having the folio locked and a
check for a NULL ->f_mapping that protects against truncations and can
lead to kernel crashes. E.g. when running xfstests generic/065 with
all nfs trace points enabled.
Follow the model of the XFS trace points and pass in an explŃ–cit offset
and length. This has the additional benefit that these values can
be more accurate as some of the users touch partial folio ranges. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: unmap and remove csa_va properly
Root PD BO should be reserved before unmap and remove
a bo_va from VM otherwise lockdep will complain.
v2: check fpriv->csa_va is not NULL instead of amdgpu_mcbp (christian)
[14616.936827] WARNING: CPU: 6 PID: 1711 at drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1762 amdgpu_vm_bo_del+0x399/0x3f0 [amdgpu]
[14616.937096] Call Trace:
[14616.937097] <TASK>
[14616.937102] amdgpu_driver_postclose_kms+0x249/0x2f0 [amdgpu]
[14616.937187] drm_file_free+0x1d6/0x300 [drm]
[14616.937207] drm_close_helper.isra.0+0x62/0x70 [drm]
[14616.937220] drm_release+0x5e/0x100 [drm]
[14616.937234] __fput+0x9f/0x280
[14616.937239] ____fput+0xe/0x20
[14616.937241] task_work_run+0x61/0x90
[14616.937246] exit_to_user_mode_prepare+0x215/0x220
[14616.937251] syscall_exit_to_user_mode+0x2a/0x60
[14616.937254] do_syscall_64+0x48/0x90
[14616.937257] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
