| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: extend RCU protection in igmp6_send()
igmp6_send() can be called without RTNL or RCU being held.
Extend RCU protection so that we can safely fetch the net pointer
and avoid a potential UAF.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection. |
| In the Linux kernel, the following vulnerability has been resolved:
can: etas_es58x: es58x_rx_err_msg(): fix memory leak in error path
In es58x_rx_err_msg(), if can->do_set_mode() fails, the function
directly returns without calling netif_rx(skb). This means that the
skb previously allocated by alloc_can_err_skb() is not freed. In other
terms, this is a memory leak.
This patch simply removes the return statement in the error branch and
let the function continue.
Issue was found with GCC -fanalyzer, please follow the link below for
details. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "Revert "block, bfq: honor already-setup queue merges""
A crash [1] happened to be triggered in conjunction with commit
2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The
latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq:
honor already-setup queue merges""). Yet, the reverted commit was not
the one introducing the bug. In fact, it actually triggered a UAF
introduced by a different commit, and now fixed by commit d29bd41428cf
("block, bfq: reset last_bfqq_created on group change").
So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq:
honor already-setup queue merges") out. This commit restores it.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214503 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Zap _all_ roots when unmapping gfn range in TDP MMU
Zap both valid and invalid roots when zapping/unmapping a gfn range, as
KVM must ensure it holds no references to the freed page after returning
from the unmap operation. Most notably, the TDP MMU doesn't zap invalid
roots in mmu_notifier callbacks. This leads to use-after-free and other
issues if the mmu_notifier runs to completion while an invalid root
zapper yields as KVM fails to honor the requirement that there must be
_no_ references to the page after the mmu_notifier returns.
The bug is most easily reproduced by hacking KVM to cause a collision
between set_nx_huge_pages() and kvm_mmu_notifier_release(), but the bug
exists between kvm_mmu_notifier_invalidate_range_start() and memslot
updates as well. Invalidating a root ensures pages aren't accessible by
the guest, and KVM won't read or write page data itself, but KVM will
trigger e.g. kvm_set_pfn_dirty() when zapping SPTEs, and thus completing
a zap of an invalid root _after_ the mmu_notifier returns is fatal.
WARNING: CPU: 24 PID: 1496 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:173 [kvm]
RIP: 0010:kvm_is_zone_device_pfn+0x96/0xa0 [kvm]
Call Trace:
<TASK>
kvm_set_pfn_dirty+0xa8/0xe0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
__handle_changed_spte+0x2ab/0x5e0 [kvm]
zap_gfn_range+0x1f3/0x310 [kvm]
kvm_tdp_mmu_zap_invalidated_roots+0x50/0x90 [kvm]
kvm_mmu_zap_all_fast+0x177/0x1a0 [kvm]
set_nx_huge_pages+0xb4/0x190 [kvm]
param_attr_store+0x70/0x100
module_attr_store+0x19/0x30
kernfs_fop_write_iter+0x119/0x1b0
new_sync_write+0x11c/0x1b0
vfs_write+0x1cc/0x270
ksys_write+0x5f/0xe0
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix a user-after-free in add_pble_prm
When irdma_hmc_sd_one fails, 'chunk' is freed while its still on the PBLE
info list.
Add the chunk entry to the PBLE info list only after successful setting of
the SD in irdma_hmc_sd_one. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scpi: Fix string overflow in SCPI genpd driver
Without the bound checks for scpi_pd->name, it could result in the buffer
overflow when copying the SCPI device name from the corresponding device
tree node as the name string is set at maximum size of 30.
Let us fix it by using devm_kasprintf so that the string buffer is
allocated dynamically. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix use-after-free bug in hclgevf_send_mbx_msg
Currently, the hns3_remove function firstly uninstall client instance,
and then uninstall acceletion engine device. The netdevice is freed in
client instance uninstall process, but acceletion engine device uninstall
process still use it to trace runtime information. This causes a use after
free problem.
So fixes it by check the instance register state to avoid use after free. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix tc flower deletion for VLAN priority Rx steering
To replicate the issue:-
1) Add 1 flower filter for VLAN Priority based frame steering:-
$ IFDEVNAME=eth0
$ tc qdisc add dev $IFDEVNAME ingress
$ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
$ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \
flower vlan_prio 0 hw_tc 0
2) Get the 'pref' id
$ tc filter show dev $IFDEVNAME ingress
3) Delete a specific tc flower record (say pref 49151)
$ tc filter del dev $IFDEVNAME parent ffff: pref 49151
From dmesg, we will observe kernel NULL pointer ooops
[ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 197.171367] #PF: supervisor read access in kernel mode
[ 197.171367] #PF: error_code(0x0000) - not-present page
[ 197.171367] PGD 0 P4D 0
[ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI
<snip>
[ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac]
<snip>
[ 197.171367] Call Trace:
[ 197.171367] <TASK>
[ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac]
[ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac]
[ 197.171367] tc_setup_cb_destroy+0xb3/0x180
[ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower]
The above issue is due to previous incorrect implementation of
tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule()
to get struct flow_rule *rule which is no longer valid for tc filter
delete operation.
struct flow_rule *rule = flow_cls_offload_flow_rule(cls);
struct flow_dissector *dissector = rule->match.dissector;
So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for
earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(),
this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload
record for 'RX frame steering' tc flower, currently used for VLAN
priority. The implementation has taken consideration for future extension
to include other type RX frame steering such as EtherType based.
v2:
- Clean up overly extensive backtrace and rewrite git message to better
explain the kernel NULL pointer issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix deadlock in __mptcp_push_pending()
__mptcp_push_pending() may call mptcp_flush_join_list() with subflow
socket lock held. If such call hits mptcp_sockopt_sync_all() then
subsequently __mptcp_sockopt_sync() could try to lock the subflow
socket for itself, causing a deadlock.
sysrq: Show Blocked State
task:ss-server state:D stack: 0 pid: 938 ppid: 1 flags:0x00000000
Call Trace:
<TASK>
__schedule+0x2d6/0x10c0
? __mod_memcg_state+0x4d/0x70
? csum_partial+0xd/0x20
? _raw_spin_lock_irqsave+0x26/0x50
schedule+0x4e/0xc0
__lock_sock+0x69/0x90
? do_wait_intr_irq+0xa0/0xa0
__lock_sock_fast+0x35/0x50
mptcp_sockopt_sync_all+0x38/0xc0
__mptcp_push_pending+0x105/0x200
mptcp_sendmsg+0x466/0x490
sock_sendmsg+0x57/0x60
__sys_sendto+0xf0/0x160
? do_wait_intr_irq+0xa0/0xa0
? fpregs_restore_userregs+0x12/0xd0
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f9ba546c2d0
RSP: 002b:00007ffdc3b762d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f9ba56c8060 RCX: 00007f9ba546c2d0
RDX: 000000000000077a RSI: 0000000000e5e180 RDI: 0000000000000234
RBP: 0000000000cc57f0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9ba56c8060
R13: 0000000000b6ba60 R14: 0000000000cc7840 R15: 41d8685b1d7901b8
</TASK>
Fix the issue by using __mptcp_flush_join_list() instead of plain
mptcp_flush_join_list() inside __mptcp_push_pending(), as suggested by
Florian. The sockopt sync will be deferred to the workqueue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: nexthop: fix null pointer dereference when IPv6 is not enabled
When we try to add an IPv6 nexthop and IPv6 is not enabled
(!CONFIG_IPV6) we'll hit a NULL pointer dereference[1] in the error path
of nh_create_ipv6() due to calling ipv6_stub->fib6_nh_release. The bug
has been present since the beginning of IPv6 nexthop gateway support.
Commit 1aefd3de7bc6 ("ipv6: Add fib6_nh_init and release to stubs") tells
us that only fib6_nh_init has a dummy stub because fib6_nh_release should
not be called if fib6_nh_init returns an error, but the commit below added
a call to ipv6_stub->fib6_nh_release in its error path. To fix it return
the dummy stub's -EAFNOSUPPORT error directly without calling
ipv6_stub->fib6_nh_release in nh_create_ipv6()'s error path.
[1]
Output is a bit truncated, but it clearly shows the error.
BUG: kernel NULL pointer dereference, address: 000000000000000000
#PF: supervisor instruction fetch in kernel modede
#PF: error_code(0x0010) - not-present pagege
PGD 0 P4D 0
Oops: 0010 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 638 Comm: ip Kdump: loaded Not tainted 5.16.0-rc1+ #446
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
RIP: 0010:0x0
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
RSP: 0018:ffff888109f5b8f0 EFLAGS: 00010286^Ac
RAX: 0000000000000000 RBX: ffff888109f5ba28 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8881008a2860
RBP: ffff888109f5b9d8 R08: 0000000000000000 R09: 0000000000000000
R10: ffff888109f5b978 R11: ffff888109f5b948 R12: 00000000ffffff9f
R13: ffff8881008a2a80 R14: ffff8881008a2860 R15: ffff8881008a2840
FS: 00007f98de70f100(0000) GS:ffff88822bf00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000100efc000 CR4: 00000000000006e0
Call Trace:
<TASK>
nh_create_ipv6+0xed/0x10c
rtm_new_nexthop+0x6d7/0x13f3
? check_preemption_disabled+0x3d/0xf2
? lock_is_held_type+0xbe/0xfd
rtnetlink_rcv_msg+0x23f/0x26a
? check_preemption_disabled+0x3d/0xf2
? rtnl_calcit.isra.0+0x147/0x147
netlink_rcv_skb+0x61/0xb2
netlink_unicast+0x100/0x187
netlink_sendmsg+0x37f/0x3a0
? netlink_unicast+0x187/0x187
sock_sendmsg_nosec+0x67/0x9b
____sys_sendmsg+0x19d/0x1f9
? copy_msghdr_from_user+0x4c/0x5e
? rcu_read_lock_any_held+0x2a/0x78
___sys_sendmsg+0x6c/0x8c
? asm_sysvec_apic_timer_interrupt+0x12/0x20
? lockdep_hardirqs_on+0xd9/0x102
? sockfd_lookup_light+0x69/0x99
__sys_sendmsg+0x50/0x6e
do_syscall_64+0xcb/0xf2
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f98dea28914
Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 48 8d 05 e9 5d 0c 00 8b 00 85 c0 75 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 41 89 d4 55 48 89 f5 53
RSP: 002b:00007fff859f5e68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e2e
RAX: ffffffffffffffda RBX: 00000000619cb810 RCX: 00007f98dea28914
RDX: 0000000000000000 RSI: 00007fff859f5ed0 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000008
R10: fffffffffffffce6 R11: 0000000000000246 R12: 0000000000000001
R13: 000055c0097ae520 R14: 000055c0097957fd R15: 00007fff859f63a0
</TASK>
Modules linked in: bridge stp llc bonding virtio_net |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum: Protect driver from buggy firmware
When processing port up/down events generated by the device's firmware,
the driver protects itself from events reported for non-existent local
ports, but not the CPU port (local port 0), which exists, but lacks a
netdev.
This can result in a NULL pointer dereference when calling
netif_carrier_{on,off}().
Fix this by bailing early when processing an event reported for the CPU
port. Problem was only observed when running on top of a buggy emulator. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Fix NULL pointer dereferencing in smc_vlan_by_tcpsk()
Coverity reports a possible NULL dereferencing problem:
in smc_vlan_by_tcpsk():
6. returned_null: netdev_lower_get_next returns NULL (checked 29 out of 30 times).
7. var_assigned: Assigning: ndev = NULL return value from netdev_lower_get_next.
1623 ndev = (struct net_device *)netdev_lower_get_next(ndev, &lower);
CID 1468509 (#1 of 1): Dereference null return value (NULL_RETURNS)
8. dereference: Dereferencing a pointer that might be NULL ndev when calling is_vlan_dev.
1624 if (is_vlan_dev(ndev)) {
Remove the manual implementation and use netdev_walk_all_lower_dev() to
iterate over the lower devices. While on it remove an obsolete function
parameter comment. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce()
ethtool_set_coalesce() now uses both the .get_coalesce() and
.set_coalesce() callbacks. But the check for their availability is
buggy, so changing the coalesce settings on a device where the driver
provides only _one_ of the callbacks results in a NULL pointer
dereference instead of an -EOPNOTSUPP.
Fix the condition so that the availability of both callbacks is
ensured. This also matches the netlink code.
Note that reproducing this requires some effort - it only affects the
legacy ioctl path, and needs a specific combination of driver options:
- have .get_coalesce() and .coalesce_supported but no
.set_coalesce(), or
- have .set_coalesce() but no .get_coalesce(). Here eg. ethtool doesn't
cause the crash as it first attempts to call ethtool_get_coalesce()
and bails out on error. |
| In the Linux kernel, the following vulnerability has been resolved:
aio: fix use-after-free due to missing POLLFREE handling
signalfd_poll() and binder_poll() are special in that they use a
waitqueue whose lifetime is the current task, rather than the struct
file as is normally the case. This is okay for blocking polls, since a
blocking poll occurs within one task; however, non-blocking polls
require another solution. This solution is for the queue to be cleared
before it is freed, by sending a POLLFREE notification to all waiters.
Unfortunately, only eventpoll handles POLLFREE. A second type of
non-blocking poll, aio poll, was added in kernel v4.18, and it doesn't
handle POLLFREE. This allows a use-after-free to occur if a signalfd or
binder fd is polled with aio poll, and the waitqueue gets freed.
Fix this by making aio poll handle POLLFREE.
A patch by Ramji Jiyani <ramjiyani@google.com>
(https://lore.kernel.org/r/20211027011834.2497484-1-ramjiyani@google.com)
tried to do this by making aio_poll_wake() always complete the request
inline if POLLFREE is seen. However, that solution had two bugs.
First, it introduced a deadlock, as it unconditionally locked the aio
context while holding the waitqueue lock, which inverts the normal
locking order. Second, it didn't consider that POLLFREE notifications
are missed while the request has been temporarily de-queued.
The second problem was solved by my previous patch. This patch then
properly fixes the use-after-free by handling POLLFREE in a
deadlock-free way. It does this by taking advantage of the fact that
freeing of the waitqueue is RCU-delayed, similar to what eventpoll does. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix NULL pointer dereference in i40e_dbg_dump_desc
When trying to dump VFs VSI RX/TX descriptors
using debugfs there was a crash
due to NULL pointer dereference in i40e_dbg_dump_desc.
Added a check to i40e_dbg_dump_desc that checks if
VSI type is correct for dumping RX/TX descriptors. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, slub: fix potential memoryleak in kmem_cache_open()
In error path, the random_seq of slub cache might be leaked. Fix this
by using __kmem_cache_release() to release all the relevant resources. |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: j1939_netdev_start(): fix UAF for rx_kref of j1939_priv
It will trigger UAF for rx_kref of j1939_priv as following.
cpu0 cpu1
j1939_sk_bind(socket0, ndev0, ...)
j1939_netdev_start
j1939_sk_bind(socket1, ndev0, ...)
j1939_netdev_start
j1939_priv_set
j1939_priv_get_by_ndev_locked
j1939_jsk_add
.....
j1939_netdev_stop
kref_put_lock(&priv->rx_kref, ...)
kref_get(&priv->rx_kref, ...)
REFCOUNT_WARN("addition on 0;...")
====================================================
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 20874 at lib/refcount.c:25 refcount_warn_saturate+0x169/0x1e0
RIP: 0010:refcount_warn_saturate+0x169/0x1e0
Call Trace:
j1939_netdev_start+0x68b/0x920
j1939_sk_bind+0x426/0xeb0
? security_socket_bind+0x83/0xb0
The rx_kref's kref_get() and kref_put() should use j1939_netdev_lock to
protect. |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_pci: peak_pci_remove(): fix UAF
When remove the module peek_pci, referencing 'chan' again after
releasing 'dev' will cause UAF.
Fix this by releasing 'dev' later.
The following log reveals it:
[ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci]
[ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537
[ 35.965513 ] Call Trace:
[ 35.965718 ] dump_stack_lvl+0xa8/0xd1
[ 35.966028 ] print_address_description+0x87/0x3b0
[ 35.966420 ] kasan_report+0x172/0x1c0
[ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci]
[ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170
[ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci]
[ 35.967945 ] __asan_report_load8_noabort+0x14/0x20
[ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci]
[ 35.968752 ] pci_device_remove+0xa9/0x250 |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: thermal: Fix out-of-bounds memory accesses
Currently, mlxsw allows cooling states to be set above the maximum
cooling state supported by the driver:
# cat /sys/class/thermal/thermal_zone2/cdev0/type
mlxsw_fan
# cat /sys/class/thermal/thermal_zone2/cdev0/max_state
10
# echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state
# echo $?
0
This results in out-of-bounds memory accesses when thermal state
transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the
transition table is accessed with a too large index (state) [1].
According to the thermal maintainer, it is the responsibility of the
driver to reject such operations [2].
Therefore, return an error when the state to be set exceeds the maximum
cooling state supported by the driver.
To avoid dead code, as suggested by the thermal maintainer [3],
partially revert commit a421ce088ac8 ("mlxsw: core: Extend cooling
device with cooling levels") that tried to interpret these invalid
cooling states (above the maximum) in a special way. The cooling levels
array is not removed in order to prevent the fans going below 20% PWM,
which would cause them to get stuck at 0% PWM.
[1]
BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290
Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 #122
Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016
Workqueue: events_freezable_power_ thermal_zone_device_check
Call Trace:
dump_stack_lvl+0x8b/0xb3
print_address_description.constprop.0+0x1f/0x140
kasan_report.cold+0x7f/0x11b
thermal_cooling_device_stats_update+0x271/0x290
__thermal_cdev_update+0x15e/0x4e0
thermal_cdev_update+0x9f/0xe0
step_wise_throttle+0x770/0xee0
thermal_zone_device_update+0x3f6/0xdf0
process_one_work+0xa42/0x1770
worker_thread+0x62f/0x13e0
kthread+0x3ee/0x4e0
ret_from_fork+0x1f/0x30
Allocated by task 1:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7c/0x90
thermal_cooling_device_setup_sysfs+0x153/0x2c0
__thermal_cooling_device_register.part.0+0x25b/0x9c0
thermal_cooling_device_register+0xb3/0x100
mlxsw_thermal_init+0x5c5/0x7e0
__mlxsw_core_bus_device_register+0xcb3/0x19c0
mlxsw_core_bus_device_register+0x56/0xb0
mlxsw_pci_probe+0x54f/0x710
local_pci_probe+0xc6/0x170
pci_device_probe+0x2b2/0x4d0
really_probe+0x293/0xd10
__driver_probe_device+0x2af/0x440
driver_probe_device+0x51/0x1e0
__driver_attach+0x21b/0x530
bus_for_each_dev+0x14c/0x1d0
bus_add_driver+0x3ac/0x650
driver_register+0x241/0x3d0
mlxsw_sp_module_init+0xa2/0x174
do_one_initcall+0xee/0x5f0
kernel_init_freeable+0x45a/0x4de
kernel_init+0x1f/0x210
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff8881052f7800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 1016 bytes inside of
1024-byte region [ffff8881052f7800, ffff8881052f7c00)
The buggy address belongs to the page:
page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0
head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x200000000010200(slab|head|node=0|zone=2)
raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc
ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Fix potential VPE leak on error
In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error,
there is an off-by-one in the number of VPEs to be freed.
Fix it by simply passing the number of VPEs allocated, which is the
index of the loop iterating over the VPEs.
[maz: fixed commit message] |
