| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| node-tar,a Tar for Node.js, has a race condition vulnerability in versions up to and including 7.5.3. This is due to an incomplete handling of Unicode path collisions in the `path-reservations` system. On case-insensitive or normalization-insensitive filesystems (such as macOS APFS, In which it has been tested), the library fails to lock colliding paths (e.g., `ß` and `ss`), allowing them to be processed in parallel. This bypasses the library's internal concurrency safeguards and permits Symlink Poisoning attacks via race conditions. The library uses a `PathReservations` system to ensure that metadata checks and file operations for the same path are serialized. This prevents race conditions where one entry might clobber another concurrently. This is a Race Condition which enables Arbitrary File Overwrite. This vulnerability affects users and systems using node-tar on macOS (APFS/HFS+). Because of using `NFD` Unicode normalization (in which `ß` and `ss` are different), conflicting paths do not have their order properly preserved under filesystems that ignore Unicode normalization (e.g., APFS (in which `ß` causes an inode collision with `ss`)). This enables an attacker to circumvent internal parallelization locks (`PathReservations`) using conflicting filenames within a malicious tar archive. The patch in version 7.5.4 updates `path-reservations.js` to use a normalization form that matches the target filesystem's behavior (e.g., `NFKD`), followed by first `toLocaleLowerCase('en')` and then `toLocaleUpperCase('en')`. As a workaround, users who cannot upgrade promptly, and who are programmatically using `node-tar` to extract arbitrary tarball data should filter out all `SymbolicLink` entries (as npm does) to defend against arbitrary file writes via this file system entry name collision issue. |
| jaraco.context, an open-source software package that provides some useful decorators and context managers, has a Zip Slip path traversal vulnerability in the `jaraco.context.tarball()` function starting in version 5.2.0 and prior to version 6.1.0. The vulnerability may allow attackers to extract files outside the intended extraction directory when malicious tar archives are processed. The strip_first_component filter splits the path on the first `/` and extracts the second component, while allowing `../` sequences. Paths like `dummy_dir/../../etc/passwd` become `../../etc/passwd`. Note that this suffers from a nested tarball attack as well with multi-level tar files such as `dummy_dir/inner.tar.gz`, where the inner.tar.gz includes a traversal `dummy_dir/../../config/.env` that also gets translated to `../../config/.env`. Version 6.1.0 contains a patch for the issue. |
| Orval generates type-safe JS clients (TypeScript) from any valid OpenAPI v3 or Swagger v2 specification. Versions 7.10.0 until 8.0.2 are vulnerable to arbitrary code execution in environments consuming generated clients. This issue is similar in nature to CVE-2026-22785, but affects a different code path in @orval/core that was not addressed by CVE-2026-22785's fix. The vulnerability allows untrusted OpenAPI specifications to inject arbitrary TypeScript/JavaScript code into generated clients via the x-enumDescriptions field, which is embedded without proper escaping in getEnumImplementation(). I have confirmed that the injection occurs during const enum generation and results in executable code within the generated schema files. Orval 8.0.2 contains a fix for the issue. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-13 and 6.9.13-38, a heap buffer overflow vulnerability in the XBM image decoder (ReadXBMImage) allows an attacker to write controlled data past the allocated heap buffer when processing a maliciously crafted image file. Any operation that reads or identifies an image can trigger the overflow, making it exploitable via common image upload and processing pipelines. Versions 7.1.2-13 and 6.9.13-38 fix the issue. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Versions prior to 7.1.2-13 have a stack overflow via infinite recursion in MSL (Magick Scripting Language) `<write>` command when writing to MSL format. Version 7.1.2-13 fixes the issue. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. The BilateralBlurImage method will allocate a set of double buffers inside AcquireBilateralTLS. But, in versions prior to 7.1.2-13, the last element in the set is not properly initialized. This will result in a release of an invalid pointer inside DestroyBilateralTLS when the memory allocation fails. Version 7.1.2-13 contains a patch for the issue. |
| A weakness has been identified in CRMEB up to 5.6.3. The impacted element is the function remoteRegister of the file crmeb/app/services/user/LoginServices.php of the component JSON Token Handler. Executing a manipulation of the argument uid can lead to improper authentication. The attack may be performed from remote. The attack requires a high level of complexity. The exploitability is regarded as difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in CRMEB up to 5.6.3. The affected element is the function appleLogin of the file crmeb/app/api/controller/v1/LoginController.php. Performing a manipulation of the argument openId results in improper authentication. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in MineAdmin 1.x/2.x. Affected by this vulnerability is an unknown functionality of the file /system/downloadById. Performing a manipulation of the argument ID results in information disclosure. The attack can be initiated remotely. The attack's complexity is rated as high. The exploitation appears to be difficult. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in MineAdmin 1.x/2.x. Affected is an unknown function of the file /system/getFileInfoById. Such manipulation of the argument ID leads to information disclosure. It is possible to launch the attack remotely. The attack requires a high level of complexity. The exploitability is told to be difficult. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in MineAdmin 1.x/2.x. This impacts the function refresh of the file /system/refresh of the component JWT Token Handler. This manipulation causes insufficient verification of data authenticity. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is said to be difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Socket Appender in Apache Log4j Core versions 2.0-beta9 through 2.25.2 does not perform TLS hostname verification of the peer certificate, even when the verifyHostName https://logging.apache.org/log4j/2.x/manual/appenders/network.html#SslConfiguration-attr-verifyHostName configuration attribute or the log4j2.sslVerifyHostName https://logging.apache.org/log4j/2.x/manual/systemproperties.html#log4j2.sslVerifyHostName system property is set to true.
This issue may allow a man-in-the-middle attacker to intercept or redirect log traffic under the following conditions:
* The attacker is able to intercept or redirect network traffic between the client and the log receiver.
* The attacker can present a server certificate issued by a certification authority trusted by the Socket Appender’s configured trust store (or by the default Java trust store if no custom trust store is configured).
Users are advised to upgrade to Apache Log4j Core version 2.25.3, which addresses this issue.
As an alternative mitigation, the Socket Appender may be configured to use a private or restricted trust root to limit the set of trusted certificates. |
| Early versions of Operator-SDK provided an insecure method to allow operator containers to run in environments that used a random UID. Operator-SDK before 0.15.2 provided a script, user_setup, which modifies the permissions of the /etc/passwd file to 664 during build time. Developers who used Operator-SDK before 0.15.2 to scaffold their operator may still be impacted by this if the insecure user_setup script is still being used to build new container images.
In affected images, the /etc/passwd file is created during build time with group-writable permissions and a group ownership of root (gid=0). An attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container. |
| Chainlit versions prior to 2.9.4 contain a server-side request forgery (SSRF) vulnerability in the /project/element update flow when configured with the SQLAlchemy data layer backend. An authenticated client can provide a user-controlled url value in an Element, which is fetched by the SQLAlchemy element creation logic using an outbound HTTP GET request. This allows an attacker to make arbitrary HTTP requests from the Chainlit server to internal network services or cloud metadata endpoints and store the retrieved responses via the configured storage provider. |
| Chainlit versions prior to 2.9.4 contain an arbitrary file read vulnerability in the /project/element update flow. An authenticated client can send a custom Element with a user-controlled path value, causing the server to copy the referenced file into the attacker’s session. The resulting element identifier (chainlitKey) can then be used to retrieve the file contents via /project/file/<chainlitKey>, allowing disclosure of any file readable by the Chainlit service. |
| A security flaw has been discovered in MineAdmin 1.x/2.x. This affects an unknown function of the component Swagger. The manipulation results in information disclosure. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Image Photo Gallery Final Tiles Grid plugin for WordPress is vulnerable to unauthorized access and modification of data due to missing capability checks on multiple AJAX actions in all versions up to, and including, 3.6.9. This makes it possible for authenticated attackers, with Contributor-level access and above, to view, create, modify, clone, delete, and reassign ownership of galleries created by other users, including administrators. |
| A vulnerability was identified in MineAdmin 1.x/2.x. The impacted element is an unknown function of the file /system/cache/view of the component View Interface. The manipulation leads to improper authorization. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in Tosei Online Store Management System ネット店舗管理システム 1.01. The affected element is an unknown function of the file /cgi-bin/imode_alldata.php. Executing a manipulation of the argument DevId can lead to command injection. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Yonyou KSOA 9.0. This affects an unknown part of the file /kmf/user_popedom.jsp of the component HTTP GET Parameter Handler. The manipulation of the argument folderid results in sql injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
